PROVIDING FOR CHAIN LINK FENCING AROUND ACQUIRE LAND OF PHE SUB-DIVISION PADDER AT GULABGHAR WSS GULABGHAR Under Languishing

Amount

Carriage of Cement & Steel from Kishtwar to stacking site of work average distance 65 kms by Mechanical Transport

carriage of Angle iron and Chainlink fancing from Jammu to Kishtwar stacking site average distance 305km by mechanical tansport. Angle

Chain Link fancing

Carriage of 20mm agg and 40mm agg from kishtwar to stacking site of work average distance 60km by Meachanical Transport.20mm Agg

40mm Agg

Carriage of sand from nerest source to stacking site of work average distance of 04 km by M/T .

Carriage of sand from nerest source to stacking site of work average distance of 0.5km . Cement

Steel

Angle Iron

Chain Link fancing

20mm Agg

40mm Agg

Carriage of stone feom source to site of work manual labor/ ponies an av. Distance 1 km.

Earth work in excavation by manual means over areas (exceeding 30cm and up to 1.5m in depth, 1.5 m in width as well as 10 sq meter on plan including disposal of earth to be levelled and neatly dressed (All kind of soil)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level.1:4:8( 1 cement : 4 coarse sand : 8 graded stone aggregate; 40mm normal size) Nallah stone

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level.1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate; 40mm normal size)

roviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work upto plinth level. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate; 20mm normal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto15 degrees, landings balconies, shelves, chajjas ,lintels ,bands plain window sills, staircases and spiral stairs cases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate; 20mm normal size)

Random rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12( 1 cement : 6 coarse sand : 12 graded stone aggregate; 20mm normal size) at plinth level with cement mortar 1:(1 cement: 6coarse sand.)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50mm thick 20mm nominal size stone aggregate nallah. (DPC)

Cantering and shuttering including strutting, propping etc and removal of form work for:-(a) Walls (any thickness ) including attached plasters, buttresses, plinth and string courses etc. (Post)

Pillars

Reinforcement for R.C.C works including straightening, cutting, bending, placing in position and binding all complete. T.M.T

Supply at site angle iron posts and struts of required size including bottom to be split and band at right angle in opposite direction for 10cm length and drilling holes up to 10 mm dia etc.50 x 50 x 6 mm size & 40x40x6 mm size

Providing and fixing GI Chain link fabric fencing of required width in mesh size of 50 x 50 mm made of G.I wire of dia 4mm including strengthening with 2 mm dia wire or nuts, bolts, and washers as required complete as per direction of Engineer – in- Charge.

Providing and fixing 1mm thick M.S Steel door with frams of 40x40x6mm angle iron and 3mm M.S Gusset plates at the junctions and corners all necessary fittings complete, in cluding applying a priming coat of approved steel primes.Using M.S angles40x40x6mm diagonal braces. Main Gate

12 mm cement plaster finished with a floating coat of neat cement mix (1:3) In side 1 cement: 3 fine sand.

M/S KHEM RAJ CONTRACTOR

SH. RAJINDER KUMAR PARIHAR

Ashaq Hussain

Sh. Talib Hussain

CHANDER MOHAN GUPTA

MR. ZULAFKAR ALI

FAROOQ AHMAD SHAH

Javeed Iqbal Ahanger