ADDN/ALTN/IMRPOVEMENT TO DRAINAGE AND SEWAGE COVER OF

Amount

Demolition of brick masonry built in CM complete all as specified and directed by Engr-in-charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engr In Charge.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc removing the debries outside the MOD land complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement etc built in cement mortar complete all as specified and directed by Engr In Charge.

M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; drain cover grating, framed balusters; walk ways; railings; cooler stand, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr In Charge.

Supply only liquid water proofing compund only complete all as specified and directed by Engr In Charge.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m depth; for fdn etc,or for shafts n.exc 10 sqm on plan in any type of soil/rock

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated materials n.exc 50M and depositing where directed at a level n.exc 1.5M above the starting point

M&L for Salt-glazed stoneware drain pipes150mm bore laid in trenches and jointed as specified

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150mm bore pipe, all as specified.

M & L for cement Concrete 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete, complete

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm greded crushed Aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

S&F in repair factory made SFRC manhole / drain cover (Grade M-25) heavy duty cover slab in rectangular shape of size as required, 80 mm thick incl MS sheet 2 mm thick all around the cover including demolition of cover, complete spefcified and directed by Engr - in - charge.

S&F in repair SFRC manhole cover/drain cover (Grade M-25)size 450mmx900mm x 40mm thick withMS Cover 2 mm thick alround including frame set in CM 1:4 for gully trap or wherever required including demolition of cover complete all as diected by EIC

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge.

S&F in repairs for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as percomplete all as complete all as specified and directed by Engr In Charge.

S&F in repairs for 100/110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge.

S&F in repair PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge.

S&F in repairPVC SWR bends 75 mm complete all as specified and directed by Engr In Charge.

S&F in PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed by Engr In Charge.

All as per Srl Item No 22 but 75 mm dia..

S&F in repair PVC SWR Junction piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and directed by Engr In Charge.

S&F in repair 100/110 mm PVC SWR Junction single (Single T) provided with access door complete all as specified and directed by Engr In Charge.

S&F in repair PVC SWR vent cowl of size 100/110 mm complete all as specified and directed by Engr In Charge.

S&F in repair PVC SWR vent cowl of size 75 mm complete all as specified and directed by Engr In Charge.

M&L for Reinforced cement concrete pipe 200mm dia class NP2, laid and jointed complete with collars as in sewar lines and jointed including dismentling complete all as specified and directed by Engr-in-Charge.

M&L for Chequered cement concrete coloured tiles (300 X300) 20-25mm thick confirming to IS -1237 (rubber moulded) in floor setc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) including 100mm thik cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes including demolition complete all as specified and directed by Engr In Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved over 50mm thick sand cushion and 100mm thick plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping including dismentling complete all as specified and directed by Engineer-in-Charge.

M & L for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making joints & filling with sand bitumen mastic as per complete all as specified and directed by Engr In Charge.

M&L old or new surfaces and applying two coat of exterior emulsion paint over a coat of primer any tint (colour as approved by GE) including preparation of surface of wall, band/chajja/balcony up to four storey height building with 3mm wall care putty complete all as specified and dircted by Engineer in charge.

M &L for removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork in SSR Part-II 2020) to a distance of 15km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge.

M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg including taking down plastering on brick or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water, etc built in cement mortar and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.

M & L Reinforced cement concrete M-25 using 20mm graded stone aggregate as in chajjas and the like complete all as specified and directed by Engr-In-Charge.

M & L formwork to chullah hoods, chajjas, slab, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge.

S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified.

All as per Srl item No 37 above but 6 to 8mm dia, as in stirrups, spacers and binders complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.complete all as specified and directed by Engr In Charge.

M&L Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 complete all as specified and directed by Engr In Charge.

M&L Virified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) over 100mm thick plain cement concrete, type D-2, 1:4:8, complete all as specified and directed by Engr In Charge.

All as per Srl item No-44 but as on vertical surface of wall such as skirting/dado incl 10mm thick cement plaster (1:4) as in backing coat of tiles complete all as specified and directed by Engr In Charge.

M&L for non skid ceramic joint free coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified and directed by Engneer-in-Charge.

M&L for Chequered cement concrete coloured tiles (300 X300) 20-25mm thick confirming to IS -1237 (rubber moulded) in floor setc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) including 100mm thik cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes including demolition complete all as specified and directed by Engr In Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved over 50mm thick sand cushion and 100mm thick plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping including dismentling complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new/old plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls complete and specified and as directed by engr-in -charge.

M&L for preparation on new or previously untreated wall surfaces and applying two coat of exterior emulsion paint over a coat of primer any tint (colour as approved by GE) over putty including preparation of surface of walcomplete all as specified and dircted by Engineer in charge.

Taking down steel tubing or removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.

All as per Srl Item No 48 but 20mm bore.

S&F for 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 50 here in before but 20mm bore

Dismantling water tanks exc 500 but not exc 1000 ltrs capacity and removing to store complete all as specified and directed by Engr In Charge.

S&F Rotational moulded polyethylene 1000 Ltr water storage tanks as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed by Engr-in-Charge.

S &F for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed complete all as specified and directed by Engr In Charge.

Supplying and fixing in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specified.

S&F 10 ltr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete and specified and directed by engr-in -charge.

S & F in repairs for 125mm dia Stainless steel grating with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed by Engr In Charge.

S&F in repair gun metal globe balve ot gate valve with mild steel iron wheel head, screwed both ends for iron pipe & fifed for 20 mm bore complete all as specified and directed by Engr In Charge.

S&F 15 mm Stop valves,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and directed by Engr-in-Charge.

S & F 15mm CP bib tap fancy type copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etc complete all as specified and directed by Engr In Charge.

M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engr In Charge.

S & F for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr In Charge.

M & L for 15 mm dia Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr In Charge.

S&F chromium plated shower rose 125 mm size with or without swivel joints complete all as specified and directed by Engr In Charge.

S&F in repairs CP tubular Towel rail , 20 mm dia, D Type 600mm long between flanges brass chromium plated with screws and cleats, (Minimum weight 190 gms) complete all as specified and directed by Engr In Charge.

S&F in repairs soap dish, Steelness steel approximate size 160x160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified and directed by Engr In Charge.

S&F of glass shelf corner consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr In Charge.

S&F 15mm dia PVC Connection 450 mm long with nuts complete all as specified and directed by Engr In Charge.

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting with padestal complete all as specified and directed by Engr In Charge.

Construction of Soakage well of size 1.2 mtr dia 3.00 mtr deep including excavation & earth work in any type of soil PCC 1:3:6 type in foundation ,walls of honey combed masonry with top ring of M-25 concrete incliding intercepting chamber and screen chamber and solid brick work in CM 1:4, RCC cover slab in M-25 concrete, filling with brick bats, interconnecting pipe of RCC/DWC complete all as specified and directed .

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

shakti construction

SURESH KUMAR SHARMA & CO

J D ENTERPRISES

JAIPAL AND BROTHERS