CONSTRUCTION OF COMMERCIAL BUILDING AT TAPCMS BANNIMANTAP INDUSTRIAL A LAYOUT MYSURU

CONSTRUCTION OF COMMERCIAL BUILDING AT TAPCMS BANNIMANTAP INDUSTRIAL A LAYOUT MYSURU

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such imillar works in all kinds of soils, as per dra...

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, t...

Providing and laying in position plain cement concrete for levelling

course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers notexceeding 20cm in depth, consolidating each deposited layer byram...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in Reinforced cement concrete for all Basement& surface level works, return walls, retaining walls, sunken floors tc. The granite/trap/basalt crushed graded coarse aggregates and ...

Providing and laying in Reinforced cement concrete for all Basement& surface level works, return walls, retaining walls, sunken floors tc. The granite/trap/basalt crushed graded coarse aggregates and ...

Providing and laying in Reinforced cement concrete for all Basement

& surface level works, return walls, retaining walls, sunken floors

etc. The granite/trap/basalt crushed graded coarse aggregates ...

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical

Specifications.

Providing and constructing load bearing wall with soild concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00n/mm2 conforming to IS 21...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 15 mm cement plaster on the rough side of single or half

brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off

corners wherever required smooth rendering, providing and rem...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement to

brick/stone masonry including rounding off corners wherever required s...

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two coats) including a coat of approved steel primer but excludi...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing & fixing of louvered ventilator made out of multi chambered

UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...

Poviding and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming

coat with approved steel primer all complete. Fixed to open...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Extra for providing Manually operated Bevel Gear Box for operating

rolling shutters including cost of materials, labour, usage charges of

machinery complete as per specifications and as per directio...

Providing and fixing ball bearing for rolling shutters including cost

of materials, labour, usage charges of machinery complete as per

specifications and as per directions of the Engineer-in-Charge