Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹47.6 L+₹3.8 L (8.68%)Rejected-AOC | L2 | Rejected-AOC Other Than Lowest | |
| 3 | L3₹47.6 L+₹3.8 L (8.68%)Rejected-AOC 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-AOC Other Than Lowest | |
| 4 | L4₹47.7 L+₹3.9 L (9.02%)Rejected-AOC WARD NO 1 CALICUT PORT BLAIR SOUTH ANDAMAN 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L4 | Rejected-AOC Other Than Lowest | |
| 5 | L5₹48.8 L+₹5.0 L (11.4%)Rejected-AOC SHOP NO 6 BENGALI CLUB MIDDLE POINT SRI VIJAYA PURAM 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L5 | Rejected-AOC Other Than Lowest |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Brichgunj
GE Brichgunj
PROVN OF 2NOS OF STORE ROOMS AND ADDITION / ALTERATION OF BAYOET CHOWK AT BRICHGUNJ MIL STATION PORTBLAIR
2022_MES_545372_2
8262A
Open Tender
Civil Works
Item Rate
180 days
Brichgunj
Class D Cat a i
8 documents required · 8 mandatory
₹500
GE Brichgunj
₹80,000
Yes
26 Sept 2022
5 Sept 2022
19 Sept 2022
5 Sept 2022
17 Sept 2022
12 Sept 2022
5 Sept 2022 - 11 Sept 2022
Amount
Surface dressing n exc 15 cm deep and getting out hard/Dense Soil complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out Hard/Dense Soil complete all as specified and as directed.
Add to item No.2 for each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out Hard/Dense Soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes /cable of any size etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil all as specified.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified and directed
Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in soft/ loose soil, complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface.
Return filling in Surplus soil,and back filling, including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as directed.
M&L Cement concrete in foundations, filling and mass concrete type D-2 1:4:8 (40mm graded stone aggregate) complete all as specified and as directed.
M&L Reinforced cement concrete (design mix M-30 grade using 20mm stone graded aggregate) in Foundations footings, plinth beams, bases for columns, etc and mass concrete complete all as specified and as directed.
M&L Reinforced cement concrete (design mix M-30 grade using 20mm graded stone aggregate) above top of footings including attached pilasters and buttresses complete all as specified and as directed.
M&L Reinforced cement concrete (design mix M-30 grade using 20mm graded stone aggregate) Columns, pillars, piers, posts and strutscomplete all as specified and as directed.
M&L Reinforced cement concrete (design mix M-30 grade using 20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L Reinforced cement concrete (design mix M-30 grade using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste of Formwork flat or curved to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter complete all as specified and as directed.
Use and waste of Formwork flat or curved to to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.
Use and waste of Formwork flat or curved to sides and soffits offloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
Use and waste of Formwork flat or curved to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per Serial item no 16 above but 6mm to 8mm dia complete all as specified and as directed.
M&L pre-cast cement concrete masonary in PCC 1:3:6 type C1 using 20mm graded coarse aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete all as specified and as directed.
M&L for precast cement concrete masonry in PCC 1:3:6 type C1 using 20mm graded coarse aggregate with solid block, n.exc. 10cm in width setting in CM 1:6 complete all as specified and as directed.
M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate to horizontal or vertical surface including necessary formwork complete all as specified and as directed.
M&L for 15mm thick rendering in two layers of 10mm thick backing coat inCM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces/ RCC roof surface all as specified and as directed by Engg-in-Charge
MM&L rendering 10 mm thick on fair faces of concrete/block masonry surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.
M&L for 5mm thick rendering in CM 1:3 on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like all as specified and as directed by Engg-in-Charge
M&L for Filling under floors or in foundations including watering and consolidation all as specified and as directed by Engg-in-Charge
M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 10cm thick, watered and rammed to a true surface all as specified and as directed by Engg-in-Charge
M&L 100mm thick PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in sub base for floors complete all as specified and as directed.
M&L 75mm thick Cement concrete type B-1,1:2:4 (20mm graded stone aggregate) as in plinth protection all as specified and as directed by Engg-in-Charge
M & L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floors including finishing even and smooth using extra cement all as specified.
M& L for two coat of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer over and including a 2mm thick a coat of external wall care putty on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed.
M & L for applying two coats of oil bound distemper over a coat of primer over and including 2 mm thick a coat of wall putty on newly plastered surfaces of wall including preperation of surfaces complete all as specificed and as directed
M & L for applying two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of Ceilings, soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like including preperation of surfaces complete all as specificed and as directed
S&F Aluminium anodised door / window / ventilator / partition frames including shutters (Two no glazed and gauzed) side hung type with out sash bar, standard aluminium grill, using standerd section incl necessary joining cleats glazing clips, rubber packing, anodise Aluminium snap beading screws, handle and locking arragment etc complete Note : Glass & fly proof mesh measured and paid seperately as supply only. & Hardwares shall be measured and paid separetely
S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed.
S&F 100mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed.
S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed.
Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
S&F Aluminum anodised butt hings 75mm long extruded alluminum, alloy with galvanised mild steel hinge pin, type C-22 complete all as specified and as directed.
Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated exterior grade on both sides with decorative choice lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.
S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachemtns attachment complete all as specified and as directed.
S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed.
M&L for Preparation of new or previously untreated steel surfaces & applying a two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth,not otherwise described.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
M&L for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete all as specified and as directed by Engineer-in-Charge.
Demolition of PCC block masonry built in cement mortar all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness etc below or above ground level incl floor, hearth, tiles if any and removing the rubbish off the premises complete all as specified and as directed by Engr-in-Charge
M&L 18-20mm thick granite stone (of any type and coloured in single peice ) work (table rubbed and polished) in walls/vertical surfaces machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including griding and polishing types over & including screed bed 10mm thick in CM 1:3 complete all as specified and directed by Engineer-in-Charge.
M&L for Designer Coloured Glazed 3D stones of 18mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the surface etc incl backing coat of 10mm thick in CM 1:3 complete all as specified.
M&L for Designer Coloured Glazed 3D stones of 18mm thick on horizontal surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the surface etc incl screed bed of 20mm thick in CM 1:6 complete all as specified.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and as directed by Engineer-in-charge.
M&L 18-20mm thick granite stone (of any type and coloured in single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, Horizontal surfaces machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including griding and polishing types over & including screed bed 20mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or dry and pointed complete all as specified and as directed by Engr-in-Charge
Material and labour for Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, over and including 50mm consolidated thick sand cushioning including watering and consolidation for base/ bed all as specified a complete all as specified and as directed
S&F 3mm SS-304 grade SS letters with stem thickness min 2.5cm fixed on vertical surfaces complete all as specified and as directed by Engineer-in-Charge
S&F SS-304 grade SS etching logo of thickness 50mm and fixing on vertical surfaces complete all as specified and as directed by Engineer-in-Charge
S& F in replacement steel water tubes medium grade (ISI marked) galvanised with all fittings and fixed to walls or laid on floor or in ceilings of size 40 mm bore pipe complete all as specified and as directed by Engr-in-Charge.
S& F in replacement steel water tubes medium grade (ISI marked) galvanised with all fittings and fixed to walls or laid on floor or in ceilings of size 25 mm bore pipe complete all as specified and as directed by Engr-in-Charge.
S & F Gun metal gate valve with iron wheel head screwed both ends of size 25 mm all as specified and as directed by Engr-in-Charge.
S & F Gun metal gate valve with iron wheel head screwed both ends of size 40mm all as specified and as directed by Engr-in-Charge.
S & F Gun metal gate valve with iron wheel head screwed both ends of size 50 mm all as specified and as directed by Engr-in-Charge.
Cutting the existing water main 50mm dia and insert 'T' reducer/ ferrule for taking branch connection size 40 mm including all materials as required and excavation, earth work complete all as specified and as directed
MS Flat Iron 25x3mm size as in hold fast
Material and Labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and as directed.
Material and Labour for rendering in CM 1:6, 15mm thick on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E250 Quality B complete all as specified and directed.
S&F steel works in tubular/ posts/ trusses/ purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240
M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete
M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)
Supplying and fixing Mild steel angle iron work as in struts and posts in fencing including cutting tops to shape as directed, drill holes, notching for wire, etc flat iron fillets (for securing wire mesh and wire any type) including all necessary drilling, bolting or riveting and embedding in concrete and screwing etc, and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed
Supplying and Fixing of PVC (SWR) single socketed 110 mm bore of pipes as in weep holes of compound wall complete all as specified and as directed
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion for Natural ground and making good disturbed ground all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Supply and fix best quality Shera planks 8mm thick, as in claddings of approved colour and coat complete with necessary screws, studs, bolts etc to metal frame complete including taking down old unservicable boarding. (Note : Necessary frame work will be measured and paid separately)
S&F 18 Watts, LED type RGB focus lightssuitable for working voltage 12 volt including suitable driver complete all as specied and as directed.
Supply ,install the Induction mono block submersible pumpset for fountain with head 21 mtrs, discharge 1.8 Ltr/Sec (LPS) to suction and delivery line, complete all as specified and directed.
S&F nozzles for fountain as per sample kept in AGE office complete all as specifed and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.00 Sqmm 4 core complete all as specied and directed.
Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sqmm.
Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 38mm ID confirming to IS 14930 -II and ISI Marked all specified and directed.
S&F LED fountain under water light (color) of capacity 12watt suitable for working along driver 220v to 12 v converter complete all as directed.
M & L fabrication of CRCA Steel Sheet encloser outdoor type of nominal dimension 400 mm x 400 mm x 300 mm duly provided with aluminimum 04 Nos bus bar of capacity 40 Amps, space for fixing two Nos MCB TPN weather/vermin proof with both way opening duly provided with neoprene rubber gasket along the doors openings pedestal type duly painted and making connection /thimbles complete all as sepcified and directed
Supply and fix 40Amps ,4pole,10KA C curved MCB complete all as specied and directed
M&L for wiring complete with two run 1.5 sqmm FRLS single core PVC insulated unsheathed single core cable 1100 vots grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC conduit and all accessories fixed to wall /roof/floors etc with one run of 1.5 sqmm FRLS single core multistranded copper conductor as earth continuity conductor including dismantling unserviceable wiring / accessories complete all as specified and as directed. Note: (1) Two runs of cable & one run of earth continuity conductor shall be measured as one running metre.
M&L, Earthing complete with Galvinised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected tocopper Galvanised strip 32 x 6mm as earth lead by means of bolts, nuts, washers and check nuts made out of copper earth plate all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed. Note 1: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick RCC cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II.
M & L for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board box type .complete all as specified and as directed by Engineer-in-Charge
One light point controlled by one way switch
One ceiling fan point controlled by one way switch
One three pin 5 Amp switch socket cum on same board
One three pin 5 amp switch socket outlet multipurpose on independent board
Supply and fix of switch piano flush type single pole one way 5 Amp all as specified and directed.
Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge
Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge
Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge
Supply and fix ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed.
Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.
Supply and fix in metal enclosure distribution board SPN, 4 way 240 volts, with 100 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge
Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.
Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .