Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹31.2 L+₹1.7 L (5.86%)Rejected-Finance DALHOUSIE ROAD BYE PASS CHOWK PATHANKOT 145001 PUNJAB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹32.2 L+₹2.7 L (9.24%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹32.2 L+₹2.8 L (9.47%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹32.5 L+₹3.0 L (10.3%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
11 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
DAY TO DAY REPAIR/MAINTENANCE WORK IN NO 1 AREA (DOMESTIC AREA) AT AIR FORCE STATION PATHANKOT
2023_MES_604407_1
8422/GE/PAF-27/2023-24
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹60,000
Yes
4 Aug 2023
20 Jun 2023
13 Jul 2023
20 Jun 2023
11 Jul 2023
4 Jul 2023
Amount
Supply and fixing PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking device both complete all as specified and directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe including disconnecting existing tanks and refixing in position after cleaning for 500 litres capacity of tank complete all as specified and directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe including disconnecting existing tanks and refixing in position after cleaning for 1000 litres capacity of tank complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs spindel of size 15mm for any taps including taking down old one complete all as specified and directed by Engineer-in-Charge.
Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge. . Tank should be marked with Date and Year with enamel paint.
Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge. Tank should be marked with Date and Year with enamel paint.
Taking up or down steel tubing 15mm bore and connections complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 11 above, but fixing only complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing 20 mm bore and connections complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 14 above, but fixing only complete all as specified and directed by Engineer-in-Charge.
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of length up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour,back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair Vitreous china Urinal, bowl type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge.
Repair to exisiting PVC flushing cistern by replacing float valve complete all as specified and directed by Engineer-in-Charge.
Repair to exisiting PVC flushing cistern by replacing syphon and washer complete all as specified and directed by Engineer-in-Charge.
Repair to exisiting PVC flushing cistern by replacing cistern handle of any typecomplete all as specified and directed by Engineer-in-Charge.
Supply & fixing PVC connection 15mm bore size with two SS nuts and washers and one key of length 450mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing PVC connection 15mm bore size with two nuts and washers of length 600mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and directed by Engineer-in-Charge.
Supply & fixing Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP waste coupling grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495x420mm and bowl size 410x330x160mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement stainless steel plate rack of size 750mm X 750/900mm X 250 mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1m long flexible tube and wall hook complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair bib taps cast iron ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repairs bib taps suitable for 15mm bore pipe long body fancy type single leaver operated quarter turn brass CP with wall flange, Capstan head screwed down screwed for iron pipe or brass ferrule complete fixed in repair and complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement with wall flange fancy type stop valve/angle valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair cast copper alloy CP shower arm 200mm long heavy body with wall flange and brass chromium plated shower rose 150mm size with swivel joints complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repairs Chromium plated Jet suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair 15 mm dia bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair angle valves PTMT of any colour high pressure screwed for, 15mm bore iron pipe/fitting (minium weight 90gm), complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair pillar taps fancy type PTMT of any colour high pressure screwed for, 15mm bore iron pipe/fitting (minium weight 110 gm), complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair 20 mm dia bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 32 mm dia bore PVC flexible pipe suitable for wash hand basin/kitchen sink complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 40 mm dia bore PVC flexible pipe suitable for urinals complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repairs waste coupling brass,cromium plated for sink/basin/urinal etc size 32mm long/ short thread complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repairs waste coupling brass,cromium plated for glaze ware sink/basin/urinal etc size 40mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing CP Towel ring of dia150mm fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge.
Supply & fixing grating round 100mm/75 mm size of CP with/without hole complete all as specified and directed by Engineer-in-Charge.
Supply & fixing 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed by Engr-in-charge.
All as above item No 49 above but 75mm bore complete all as specified and directed by Engr-in-charge.
Supply & fixing 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-charge.
Supply & fixing 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr-in-charge.
Supply & fixing , 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches all as specified.
Supply & fixing 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-charge.
Supply & fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-charge.
Supply and fixing 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square nexc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames complete all as specified and directed by Engr-in-charge.
All as per item No 57 above but figured glass complete all as specified and directed by Engr-in-charge.
Removing existing window glass pans in which oil putty and MS pines are damaged and making good by providing oil putty and MS Pins including cleaning the glass panes and fixing back in position complete all as specified and directed by Engr-in-charge.
Supply and fixing aluminium door seal up to 1200mm long best quality complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs helical door spring 150mm size with roller and roller plates of mild steel incl welding to angle iron plate or chokhets as required and complete all as specified and directed by Engr-in-charge.
Supply and fixing 0.56mm plain aluminium sheeting to doors with aluminium screws fixed in repairs complete all as specified and directed by Engr-in-charge.
Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with bracket and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engr-in-charge.
M & L Textured heavy duty exterior vitrified tiles of size 300x300x10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.
M&L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed by Engr-in-charge.
Supply & fixing in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing complete all as specified and directed by Engr-in-charge.
Supply & fixing Dead lock, vertical type 4 lever size 65 mm mild steel body complete all as specified and directed by Engr-in-charge.
Supply & fixing in repair aluminium die cast body Door closer hydraulically regulated design No2 universal type suitable for door shutter ISI Marked complete all as specified and directed by Engr-in-charge.
Supply & fixing 5.00mm thick glass fixed with rubber packing aluminium snap beading and metal pins in skelton shutters of doors and windows including solar control film 25 micron reflective type stick to glass panes as per manufactures instructions complete all as specified and directed by Engr-in-charge.
PCC 1 :2 4, type B-1 40mm thick in any position and in patches of area not exc 5 Sqm including demolition of exisitng flooring and matching the surface with existing complete all as specified and directed by Engr-in-charge.
M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth/sub base ,75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concret complete all as specified and directed by Engr-in-charge.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in patches for filling in depressions in path, floor, hard standing and roads area n.exc 5 sqm each and finishing the top surfaces even and smooth. Rate quoted by contractor indluding taking out old dismantled portion and depositing at a distance exc 500m and n.exc 1Km complete all as specified and directed by Engr-in-charge.
M&L for 40mm thick Cement concrete 1:2:4 type B-2 (using 20mm graded agg) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engr-in-charge.
Supply only glass dividing strip 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified and directed by Engr-in-charge.
Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling/demolition on existing surface complete all as specified and directed by Engr-in-charge.
M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and dismantling existing floor tiling complete all as specified and directed by Engr-in-charge.
Renewing tiles in patches as in floor or wall, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed by Engineer-in-charge.
All as per srl item no 76 above but as in highlighter of any colour/shed/pattern as approved by Engineer-in-Charge.
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster all as complete all as specified and directed by Engr-in-charge.
Rendering 20mm in two coat (15 + 5mm) on concrete surface in CM 1:4 in patches at Colms, chajja, canopy and soffits using GI chicken Mess of size 0.25mm thick & 20mm aparture fixed with nails including necessary scaffolding arrangement at any floor as required at site complete all as specified and directed by Engr-in-charge.
Preparation of newly plastered surfaces and applying two coats of oil bound distemper, including a coat of wall care putty 2-3 mm thick complete all as specified and directed by Engr-in-charge.
Rendering 15mm thick on fair/unfair faces of brick work or on stone, concrete surfaces in CM 1:4 in any position and in patches of area not exc 5 Sqm including taking down exisitng plastering and matching the surface with existing complete all as specified and directed by Engr-in-charge.
Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper, including a coat of wall care putty 2-3 mm thick complete all as specified and directed by Engr-in-charge.
M&L Granite (Z Black as per sample kept in GE office), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete all as specified and directed by Engr-in-charge.
M&L Machine cut kota stone slab 18-20mm thick as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick cement screed bed in cement mortor 1:4 and dismantling existing floor complete all as specified and directed by Engr-in-charge.
S&F in repair GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples complete all as specified and directed by Engr-in-charge.
Supply and fixing Stainless steel Hasp and staple of 100 mm long fixed with Self Tapping screws complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair stainless steel auto closing hydraulic hinges in cupboard fixed in required position complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair, 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed by Engr-in-charge.
M & L for Easing of steel window shutters area not exc 2 Sqm each , including adjusting greasing/oiling to easy opening and closing complete all as specified and directed by Engr-in-charge.
Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engr-in-charge.
Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing side rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engr-in-charge.
Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing bottom rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engr-in-charge.
Supply only second class hard wood, wrought, panel door side rail of sectional size exc 30 sqcm and not exc 50 Sqcm & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.
Supply only second class hard wood, wrought, panel door side rail of sectional size exc 50 sqcm and not exc 70 Sqcm & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.
Supply and fixing Factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete all as specified and directed by Engr-in-charge. NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.
M & L for Re securing or easing and adjusting without taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm complete all as specified and directed by Engr-in-charge.
Providing precast cement concrete in repair , PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 40mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete ( re-inforced) in any description and in any position not otherwise specially provided for complete all as specified and directed by Engr-in-charge.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed by Engr-in-charge.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engr-in-charge.
Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.
Supply and fixing factory made solid PVC door frame single rebated of size 60 x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.
Supply and fixing factory made PVC Flush door of 28 to 30mm thick(stiles) with 2, 4 or 6 raised pannel design with 5 mm thick moulded prelam PVC sheet on the front face and 5mm thick panel colour PVC sheet on back face complete all as specified and directed by Engr-in-charge.
Pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.
Pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.
Supply and fixing 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treatedfa ctory made shutters wood is to be in corporated complete all as specified and directed by Engr-in-charge.
Supply and fixing 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-charge.
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples complete all as specified and directed by Engr-in-charge.
Preparation of old steel surfaces of any description over 10cm width or girth, not otherwise desccribed applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Preparaption of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.
Preparaption of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Supply and fixing 100mm long (12Gauge) butt hinges stainless steel anodised and fixed complete all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
Supply and fixing in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engr-in-charge.
Supply and fixing Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge
Supply and fixing Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge
Supply and fixing Stainless steel Handel of 150 mm long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge
Supply and fixing Stainless steel sliding door bolts, plate type, , with bright bolt not lesss than 10mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm long complete all as specified and directed by Engr-in-charge.
Taking down of exisitg wash hand basin baracket and supply and fix new GI brackets and refixing the WHB in exisiting including making good with black/white cemenr as reqd at site complete all as specified and directed by Engr-in-charge.
Material and labour coloured Italian Vitrified tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42sqm but not exceeding 1 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in cement mortar1:4 complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair vitreous china decorative shape table top wash hand basin white of size 495x395x150mm including waste coupling of CP brass full thread of suitable size of wash basin, complete all as specified and directed by Engr-in-charge. Note: fixing of washbasin on granite/any type of surface with adhesive or any other material deemed to be included in the rate quoted by the contractor
Material and labour RCC type B-1 1:2:4 nominal mix (20 mm graded crushed stone aggregate) as in slab supported on walls, roofs beams including necessary form work to sides and bottoms complete all as specified and directed by Engr-in-charge.
Material and labour Brick work with sub class 'B' bricks straight or curved on plan in any radius in half brick thick walls in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
M&L for brass CP fitting such as extension nipple/socket/bend/elbow of 15mm bore required for fixing of any fittings, complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair CPVC pipe of 15mm bore complete all as specified and directed by Engr-in-charge.
Supply and fix centre hole mixer for mixing Hot & colt water for table top wash hand basin, cast copper alloy single leaver operated, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts for iron pipe suitable for 15mm bore fixed in repair including 450mm long braided hoses complete all as specified and directed by Engr-in-charge.
Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mmx3600mm, cross tee 25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm (thickness of the material of 0.30 mm), using 12mm thick ceiling panel gypsum board, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair only9-12 thick gypsum board of size 600x600mm as in false ceiling complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair capstain head/leaver knob suitable for CP fancy type bib taps any type of mixture, concealed cock, angle cock, pillar cock to match with existing shape and style complete all as specified and directed by Engr-in-charge.
Material and labour for re-fixing of CP grating of floor trap of any size and type, applying white cement in gaps of wash basin, sink, gratings, urinals and the like not otherwise specified joints and making good the surface complete all as specified and directed by Engr-in-charge. Note : Each job contain of minimum 5 Nos of re-fixing of grating and cement filing of 05 Nos of gap filling.
WALIA ENTERPRISES
Ms Dalip Kumar and Co.
jagdambe traders
RATTAN CHAND CHANDAN AND CO
G.M. ENGINEERING SERVICES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .