Providing and Fixing Glow Sign Board with ACP, Iron Frame and fixing of ACP LED Letter Signage and fixing of Nonlit Photo frame in Power House of Omkareshwar Power Station Phase II

Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washersetc. complete.Hot finished welded type tubes

Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing aluminium composite panel with 3 mm thick ACP sheet in required pattern colour and panel size including opening /folding panels,duly fixed extruded aluminium section frame duly fixed with screws etc. including fixing of ACP sheet with sealant compound wherever required as per direction of Engineer-in-charge work up to 5.0 m above the ground level

Providing & Fixing Glow Sign Board with Backlit Flex Media 600x600 dpi, high quality print on HP Latex machine with 100 Micron over matt lamination – 1”x1” square MS frame (5 kg+ pipe) 8” depth with 2 coat enamel paint for protection from rust & corrosion, Aluminium angle fitting for edge glow. Box – back side premium GI sheet , Side panel – Half white coated GI sheet. Lighting technologies: Ultra glow LED module (2 year warranty) High brightness & reliable, Energy saving, Environment friendly.High performance water proof LED Driver – IP68 (3 year warranty) Protections: overload/ over voltage/ short circuit.

Providing and fixing Plain precoatedgalvanised iron profile sheets (size, shape and pitch of Plain as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thicknesswith zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded6.8 grade (yield strength 480 N/mm2), counter sunk head, comprisingof 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.10x160mm

Providing & Fixing ACP – LED LETTER SIGNAGE with Front Facia: 3 mm thick Aluminium Composite Panel (ACP) 1”x1” square MS frame (5kg+ pipe) 8” depth with 2 coat enamel paint for protection from rust & corrosion, 3 mm cast Acrylic Laser cut 2.5” Embossed Letter. Vinyl cut & paste (if required).Lighting technologies: Any reputed make LED module (3 year warranty) LED design for humid & waterproof: IP67, power dissipation: 1.08W, Input : DC 12V Energy saving, Environment friendly. 3 mm ACP Back for LED module mounting. High performance water proof LED Driver – IP68 (3 year warranty) Protections: overload/ over voltage/ short circuit.

Providing &Fixing Nonlit Photo Frame with high quality print with 100 Micron over Glossy/matt lamination & mounting on 6mm high density Sun board/ WPC sheet with fancy PVC frame & hook fitting for hanging.

Providing & Fixing Mural Art of Wall : Material 6 mm MDF & ply 12 mm with colours with artist work