Karnataka

Active

Works

Buildings

Construction of Secondary & Higher Secondary School Building at Napuklu ,Madikeri Taluk,Kodagu District

Public Works Department

PWD Division Office Kodagu | Madikeri, Karnataka

Amount: ₹1.4 CrCloses: 29 Jun 20263d left

Tender Value

₹1.4 Cr

EMD Value

₹2.1 L

Closing Date

29 Jun 2026, 10:30 pm3d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of Secondary & Higher Secondary School Building at Napuklu ,Madikeri Taluk,Kodagu District

Tender Information

Tender ID

298537

Reference Number

PWD/2025-26/BD/WORK_INDENT33846

Tender Type

Open

Product Category

Buildings

Location

PWD Division Office Kodagu

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredAnnual Turnover Certificate issued by Approved Chartered Accountant with UDIN NO, Profit & loss statement of last five years as per KW-4 i.e. 2021-22 , 2022-23, 2023-2024, 2024-25 & 2025-26 Rs.276.42 Lakhs Updated to 2026-27 price level.

RequiredWork Done Certifcate - Satisfactorily completed, as prime contractor, at least one similar nature of work such as Building work of value not less than Rs.69.10 Lakhs in the last fve years i.e. 2021-22 , 2022-23, 2023-2024, 2024-25 & 2025-26 Updated to 2026-27 price level.

RequiredTenderers will only be qualified, if their available tender capacity is more than the total tender value. i.e. A x N x 1.5 - B as per KW-4 Document.

RequiredLiquid assets and /or availability of credit facilities of no less than Rs.41.46 Lakhs Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders are not accepted.

The employer reserves the right to reject one and all tenders without assigning any reason thereof.

The employer is not responsible for any delay in accessing E-procurement portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

As per Karnataka State Government order LD/300/LET/2006 Blore dated 01-01-07 and Government letter no PW/134/BMS/2007 dated 27-07-07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

All the items in the tender are inclusive of cost and conveyance of all materials, all lead, lift, loading, unloading, transportation, labour, hire charges of machinery, curing for concrete works.

Contractors should follow strictly prevailing rules of labour act.

In case of the death of a contractor, after executing the agreement/ commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

Department will not supply any materials

The tenderer should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management, plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion.

PERFORMANCE SECURITY The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee) at 5% of the amount put to tender with in 20 days after approve of tender as per rule 29.5 of the tender and clause 44 of the Agreement in the form of cash/Bankers Cheque D.D pay order Bank Guarantee or N.S.C.s duly pledged in the nature of EXECUTIVE ENGINEER PWDKodagu Division

Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution If any damage is caused it has to be rectified at his own risk and cost.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer.

To qualify for award of this Contract, each tenderer should give all details and documents as per KW-4

The estimate rates are exclusive of 18% GST and GST shall be paid to the executed amount separately.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4

GST shall not be paid in the extended period (If any) of the contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Bidder Should Establish a field Laboratory

Contractors has to submit their labour EPF details with every Running Bill.

All the originals of uploaded documents in e-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection and action may be initiated as per tender conditions and registration rules.No separate communication will be made in this regard.

The bidder who participates in tenders for more than one work for which tenders are invited in this IFT, the renderer must fulfill all the conditions and criteria cumulatively for the participated works.

The returns submitted to the Income Tax Department shall be uploaded or shall be produced at the time of verification of original documents at Division office.

LOC/ K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

The full EMD Can be paid through e-payment in any one of the form mentioned in clause 13.1 of Bid Document or One Lakh Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 13.1 of Bid Document Bank Guarantee must be given for the remaining amount in prescribed format. The Bank Guarantee must be scanned and uploaded along with the Technical bid. The original bank Guarantee should be produced at the O/o The Executive Engineer, Karnataka Public Works Department, Kodagu Division, Madikeri before the stipulated time of opening of Technical bid. Otherwise tender is liable for rejection.

Contractors should be registered with KPWD Class-III Registration and Above

The contractor should maintain the work during the defective liability period i.e. for 1 year after the completion of work at his own cost

Technical Criteria

General

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26 ) (b) Satisfactorily completed as prime contractor, at least one similar work such as Building work of value not less than Rs.69.10 Lakhs

Work Done Certificate

Section 2: ITT 3.2c To qualify for award of this contract, Quantities of work executed as prime contractor in the same name during the last five years 2021-22 to 2025-26 a) executed in any one year, the following minimum quantities of work 1. Earthwork excavation/Embankment/Subgrade -1138.00 Cu.M, 2. PCC/RCC-398.00 Cu.M, 3.Steel-20.10 Tonne, 4.Masonry( SSM/BMM)-780.00 Sq.M, 5.Plastering-1703.00 Sq.M, 6.Flooring (All Types of Flooring/Skirting/Dadoing)-700.00 Sq.M, 7.Painting-1971.00 Sq.M

Work Done Certificate

Capabilities of Vendor

Section 2: ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value amounting of Rs.138.21 LAKHS. The available tender capacity will be calculated as under: Assessed available tender capacity - A X N X1.5- B Should be greater than or equal to Rs.138.21 Lakhs where A - Maximum value of civil engineering works executed in any one year during the last five years updated to FY 2026-27 price level taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at FY 2026-27 price level, of existing commitments and on-going works to be completed during the next. 10 Months -period of completion of the works for which Tenders are invited. Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- Profit and Loss statement, Balance sheet certified from an registered chartered Accountant

Financial Status

Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (a) Achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.276.42 Lakhs.

Audited CA Certificate of Annual Turnover

Section 2: ITT 3.3 - Each Tenderer should further demonstrate : (b) Liquid assets and /or availability of credit facilities of no less than Rs.41.46 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.

Line of Credit

Others

KPWD Class-III and above Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Work Locations

Fee & Financial Details

Tender Fee Amount

₹3,460

EMD Fee Amount

₹2.1 L

Important Dates

Last Activity

15 Jun 2026

Published

15 Jun 2026

Bid Opening

30 Jun 2026

Download Ends

23 Jun 2026

Pre-Bid Meeting

22 Jun 2026

BOQ Preview

•

Construction of Secondary & Higher Secondary School Building at Napuklu ,Madikeri Taluk,Kodagu District (Ground Floor)

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary bu...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary bu...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing C.P. brass bib cock of approved quality conforming

•

to IS:8931 ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of ...

•

Providing and fixing C.P. brass stop cock (concealed) of standard design

•

and of approved make conforming to IS:8931. ---- All the items in the tender include all lead, lifts, loading unloading, transp...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- All the items in the tender include all lead, lifts, loading unload...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 40 mm nominal bore ---- All the items in the tender include all lead, lifts, loading unloa...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 25 mm nominal bore ---- All the items in the tender include all lead, lifts, loading unloa...

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore ---- All the items in the tender include all lead, lifts, loading u...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 25 mm nominal bore - Horizontal ---- All the items in the tender include all lead, lifts, loading unloadi...

•

Providing and fixing gun metal non- return valve of approved quality

•

(screwed end) : 50 mm nominal bore - Horizontal ---- All the items in the tender include all lead, lifts, loading unloadi...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing 600x450 mm beveled edge mirror of superior Glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...

•

Rectangular cover 455x610mm with frame (low duty)(inside) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcr...

•

ELECTRICAL WORK

•

SupplyingheavygaugePVCconduitpipe……mmdia

•

.......mm thick confirming to IS 2509 with suitable sizebends, metal/PVC junction boxes, adhesive paste etc.,and running before concreting the slab. The co...

•

SupplyingheavygaugePVCconduitpipe……mmdia

•

.......mm thick confirming to IS 2509 with suitable sizebends, metal/PVC junction boxes, adhesive paste etc.,and running before concreting the slab. The co...

•

SupplyingheavygaugePVCConduitPipe….diamm

•

thick with suitable size bends, metal junction boxesadhesive paste etc., by groove cutting in the wall andfixing by bracing U or J hooks and cement plasterin...

•

SupplyingheavygaugePVCConduitPipe….diamm

•

thick with suitable size bends, metal junction boxesadhesive paste etc., by groove cutting in the wall andfixing by bracing U or J hooks and cement plasterin...

•

SupplyingandfixingPVC/metalconduit 19/20Deepjunctionbox. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcre...

•

SupplyingandfixingPVC/metalcondui 25 mm tDeepjunctionbox. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcr...

•

SupplyingAndFixingMetalFanBoxwithRoundHook. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cos...

•

Supplying and flush mounting powder coated /galvanized metal box suitable for mounting modularswitch plates. The box should be firmly flush mountedafter due groove cutting in Brick/Stone/C.C wall 3 w...

•

Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, boltsnuts etc., complete on the existing meta...

•

Supplying and fixing of modular switch/ Socket/steppedelectronic fan regulator/ dimmer/telephone socket etcon existing modular switch plate.. Is 3854 and IS 1293. 6Amps one way switch ---- All the it...

•

Supplying and fixing of modular switch/ Socket/steppedelectronic fan regulator/ dimmer/telephone socket etcon existing modular switch plate.. Is 3854 and IS 1293. 6Amps two way switch ---- All the it...

•

Supplying and fixing of modular switch/ Socket/steppedelectronic fan regulator/ dimmer/telephone socket etcon existing modular switch plate.. Is 3854 and IS 1293. 6Amps three way socate ---- All the ...

•

Supplying and fixing of modular switch/ Socket/steppedelectronic fan regulator/ dimmer/telephone socket etcon existing modular switch plate.. Is 3854 and IS 1293. Stepped Fan Regulator Two Module ---...

•

Supplying and fixing of modular switch/ Socket/steppedelectronic fan regulator/ dimmer/telephone socket etcon existing modular switch plate.. Is 3854 and IS 1293. 32Amps DP switch ---- All the items i...

•

Supplying and fixing of modular switch/ Socket/steppedelectronic fan regulator/ dimmer/telephone socket etcon existing modular switch plate.. Is 3854 and IS 1293. 6/16 Amps universal socket ---- All t...

•

Supplying and wiring adopting loop system in existingPVC Conduit /casing capping casing capping using2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earthwire) FRLS multi strand PVC insulated copper wire(co...

•

Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copperwire withlowconductor resistance single core in open or concealedsystem of wiring with specified IS-694:...

•

Supplying and fixing miniature circuit breakers onexisting MCB distribution boards usingnecessary fixingmaterials and 'C' Type curve, indicator ON/OFF, energycross-3withShortcircuitbreakingcapacityof1...

•

Supplying and fixing regular MCB distribution boards onwall / wood board / flush mounting using requiredclamps, bolts, nuts etc., with provision for fixing suitabletype capacity MCB's single phase / 3...

•

Supplying,fixingandwiringElectronicTrivector

•

Meter(ETV)5to20AsinglephaseClass-1Accuracywith Temper ProofEnergy Meter. ---- All the items in the tender include all lead, lifts, loading unloading, trans...

•

FabricatingsupplyingandmountingMSboxmadeout

•

....SWG suitable for floor /wall mounting,fully weatherproof withprovisionforbetterheatdissipation,providedwith hingedfrontcover,equippedwithtamperprooflock...

•

Supplyingof1440rpmheavydutyexhaustfanwithbracketbladessuitabletooperateon230V50Hz,ACSupplycomplete.12"Sweep(300mm) ---- All the items in the tender include all lead, lifts, loading unloading, transpor...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supplyconformingtoISS-374-1979andwith

•

doubleballbearingsyst...

•

Fixing aceiling /wallmountingfanofall capacitiesandalltypes,withnecessaryclamps and'S'hookmadeoutof15mmdiaMSrod,with

•

5 A.ceilingrose of approvedquality with necessary length of 23/0.0076 inch PVC insu...

•

ExtralengthofGIpipeofclassB19mmdiafor

•

downrod. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, ...

•

Fixing one exhaustfan in the nitch alreadyleft in the wall with bolts and nuts and 5 A.ceilingrose withsufficientlengthof23/0.0076inchPVC

•

insulatedtwincorewire. ---- All the items in the tender includ...

•

Supplying of.....feet-PVC Batten with integrated LEDtube .... Wwith highqualitydiffuserwith Life of 25000burninghours&70%lumenmaintenancewithCRI 80.PowerInput:220-240V@50/60Hz&Powerfactor

•

0.9 along wi...

•

Fixingalltypesandallcapacitiesoffluorescent

•

/false ceiling / spot light / CFL / LEDfittingsindoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required N...

•

Supplyofround/squarerecess/surfacemountedrollingtypeLEDDownlightwith

•

...... W GU 10 LED Lamp Rib Fabricatedfrom diecast aluminium with white powder coated prewired to mains connector & has swivelling ...

•

Supply of LED Streetlight luminaire with pressure diecast aluminium housing body for optimal thermal dissipation.Lampcompartmentcomprisingofanti glarecleardiffuser with Injection mouldedpolycarbonate ...

•

SupplyingandFixingmmdiaclampsssAGI

•

pipebracket upto 2.7meters long terminated withareducingcollarof40x25mmtowhichextra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all...

•

Supplying&fixingofretrofittype-LEDbulbWwith

•

OPAL acrylic diffuser comprising of LED source with CCT6500degree K, CRI70%. efficacy80lumenperW,life25000 burning hours and Compliance to IS 10322/IEC60598...

•

Supplying of 1.1 KV ,XLPE or Heat reisistant PVCinsulated , PVC extrusted inner seath Armored , LTUGCable as per IS-1554 ( Part-1) or IS-7098 Part-1 ,Armouring strip thickness and resistively as per I...

•

Earth work excavation for pipelines/cables by Manualmeans upto 600 mm trench width, as per drawing andtechnical specifications, including setting out, shoring,strutting, barricading, caution lights, r...

•

LayingofcableinexistingTrench/GIPipe/StoneWare/RCCHumepipeusingWooden/AluminiumRollers

•

asdirectedbythe departmental staff,,.

•

LT Cable 35to95Sqmm ---- All the items in the tender include all lead, lift...

•

SupplyingofCablegland,...(COMMONElectricalSRof2023-24,BESCOM-PART-II,RatesforMaterialofMajor

•

25 mm ---- All the items in the tender include all lead, lifts, loading unloading, transportation, l...

•

Supplying of Haevy Duty Copper Terminal Long Barrel,...(COMMONElectricalSRof2023-24,BESCOM-PART-

•

II,Ratesfor MaterialofMajor Works)

•

25SqmmCopper Terminal, ApprxWt:11Gm ---- All the items in the tender...

•

Supplyingfixingandwiring earthelectrodeforgroundingof lifts, transformers, DG sets etc. using 40 mm dia 2.9mm thick 2.5m long GI pipe withGI funnelwith meshandsuitable size reducer fixed on the top of...

•

GI/Copper strips for grounding connections, usingnecessary fixing materials as required...( COMMONElectricalSRof2023-24,Part-III,Utilization(PWD

•

Electrical)).25x3mm Copperstrip ---- All the items in t...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW4 33846.doc

Tender Document • 1.98 MB

Ready to Participate?

Download all tender documents and submit your bid