Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.2 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹19.5 L+₹67,438 (3.59%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹20.0 L+₹1.2 L (6.14%)Rejected-Finance H NO 113 APR COLONY KATANGA CANTT JABALPUR M P PIN 482001 | JABALPUR | MADHYA PRADESH | 482001 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹21.7 L+₹2.9 L (15.6%)Rejected-Finance PLOT NO 59 60 WAZIDPUR JAIMAU KANPUR 208010 | KANPUR NAGAR | UTTAR PRADESH | 208010 | L4 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | B. S BUILDERS L4 | RIZCON L2 | P.H. CONSTRUCTION CO. L3 | Rohan Construction Company L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing) removing from site and rubbish off premises complete all as specified and directed by Engineer-in-charge. | 510 | SQM | 9 ₹4,590 | 5 ₹2,550 Lowest | 11 ₹5,610 | 10 ₹5,100 |
| 2.00 | M&L for Non-skid ceramic colour tiles 7to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over and including 15 mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade/ colour/ matrix of the tiles complete all as specified and directed by Engineer-in-charge. | 150 | SQM | 600 ₹90,000 Lowest | 650 ₹97,500 | 711 ₹1,06,650 | 699 ₹1,04,850 |
| 3.00 | S&F of vitrified ceramic tile light shade 8 to 10 mm thick light shade (sqaure/ rectangular) polished, area of each tile not exceeding 0.36 sqm , over 15 mm thick screed bed in cement mortar (1:4) in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed by Engineer-in-charge. | 60 | SQM | 900 ₹54,000 | 950 ₹57,000 | 901 ₹54,060 | 899 ₹53,940 Lowest |
| 4.00 | M&L for glazed ceramic coloured tiles in vertical surface such as skirting/dado etc, of size 350x250x7 mm thick or 450x350x7 mm thick over and including 10 mm thick bedding layer in cement mortar (1:4), set and joined in neat cement slurry and pointed in white or colour cement to match with the shade/ colour/matrix of the tiles complete all as specified and directed by Engineer-in-charge. | 300 | SQM | 600 ₹1,80,000 | 650 ₹1,95,000 | 701 ₹2,10,300 | 599 ₹1,79,700 Lowest |
| 5.00 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) including stone slab of any thickness complete all as specified and directed by Engineer-in-charge. | 43 | CUM | 300 ₹12,900 | 99 ₹4,257 Lowest | 101 ₹4,343 | 100 ₹4,300 |
| 6.00 | M&L for PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), 75 mm thick finished even & smooth without using extra cement as in plinth protection including bitumen/mast filing in the joint complete all as specified and directed by Engineer-in-charge. | 40 | SQM | 300 ₹12,000 | 250 ₹10,000 Lowest | 251 ₹10,040 | 350 ₹14,000 |
| 7.00 | M&L for 40 mm thick cement concrete in (1:2:4) type B-1, using 20 mm graded stone aggregate as in sub base finished even and fair complete all as specified and directed by Engineer-in-charge. | 490 | SQM | 270 ₹1,32,300 | 150 ₹73,500 | 101 ₹49,490 Lowest | 199 ₹97,510 |
| 8.00 | M&L for cement concrete (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in sub base, leveling course or filing in foundation in mass concrete complete all as specified and directed by Engineer-in-charge. | 2 | CUM | 1,999 ₹3,998 Lowest | 3,500 ₹7,000 | 4,551 ₹9,102 | 2,999 ₹5,998 |
| 9.00 | M&L for 20-25 mm thick kota stone, machine cut kota stone flooring over 20 mm cement screed bed in cement mortar (1:6), and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge. | 490 | SQM | 930 ₹4,55,700 | 850 ₹4,16,500 | 751 ₹3,67,990 | 599 ₹2,93,510 Lowest |
| 10.00 | M&L for 20-25 mm thick kota stone slab as in skirting, dado or in vertical surface including 15 mm thick cement mortar in (1:4) and joined in neat cement slurry mixed with pigment to match the shade or slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge. | 15 | SQM | 930 ₹13,950 | 850 ₹12,750 | 851 ₹12,765 | 799 ₹11,985 Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
24 Sept 2025, 6:00 pmClosed
AGE I U B R
AGE I U B R Delhi Cantt
Certain repair to flooring, wall, chajja, facia, plumbing and sanitary fittings under the AOR of AGE W/S-II and AGE E/S-II under AGE (I) (U) B/R, Delhi Cantt-10
2025_MES_728151_1
AGE(I)(U)B/R/T-20/2025-26
Open Tender
Civil Works
Item Rate
180 days
Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
AGE I U B R Delhi Cantt
₹60,000
Yes
27 Nov 2025
28 Aug 2025
26 Sept 2025
28 Aug 2025
24 Sept 2025
12 Sept 2025
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing) removing from site and rubbish off premises complete all as specified and directed by Engineer-in-charge.
M&L for Non-skid ceramic colour tiles 7to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over and including 15 mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade/ colour/ matrix of the tiles complete all as specified and directed by Engineer-in-charge.
S&F of vitrified ceramic tile light shade 8 to 10 mm thick light shade (sqaure/ rectangular) polished, area of each tile not exceeding 0.36 sqm , over 15 mm thick screed bed in cement mortar (1:4) in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed by Engineer-in-charge.
M&L for glazed ceramic coloured tiles in vertical surface such as skirting/dado etc, of size 350x250x7 mm thick or 450x350x7 mm thick over and including 10 mm thick bedding layer in cement mortar (1:4), set and joined in neat cement slurry and pointed in white or colour cement to match with the shade/ colour/matrix of the tiles complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) including stone slab of any thickness complete all as specified and directed by Engineer-in-charge.
M&L for PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), 75 mm thick finished even & smooth without using extra cement as in plinth protection including bitumen/mast filing in the joint complete all as specified and directed by Engineer-in-charge.
M&L for 40 mm thick cement concrete in (1:2:4) type B-1, using 20 mm graded stone aggregate as in sub base finished even and fair complete all as specified and directed by Engineer-in-charge.
M&L for cement concrete (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in sub base, leveling course or filing in foundation in mass concrete complete all as specified and directed by Engineer-in-charge.
M&L for 20-25 mm thick kota stone, machine cut kota stone flooring over 20 mm cement screed bed in cement mortar (1:6), and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.
M&L for 20-25 mm thick kota stone slab as in skirting, dado or in vertical surface including 15 mm thick cement mortar in (1:4) and joined in neat cement slurry mixed with pigment to match the shade or slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.
Taking down loose/damaged/breakage concrete of any description from reinforced cement concrete of columns, beams, slab, bracing, chajjas, fins, facia, and wall etc upto height of 10 mtr from ground level by hammering with wooden malate carefully without damaging existing serviceable structure, chipping old concrete, platering etc and disposal of debris in low laying area of def land complete all as specified and directed by Engineer-in-charge.
S&F of hard dawn steel wire fabric weight not exc 4 kgs/sqm cut to lenghts, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm in dia, fixed with existing reinforcement work upto height of 10 mtr from ground level complete all as specified and directed. (Make: (a) Tiger brand wire netting, Varada, manufacturing Co, 5118 Bazar Sirkiwala, Delhi-6, India Landmark near chawri Bazar metro station. (b) Suregreen Ltd delhi.
M&L for guniting with cement coarse sand 1:3 with and including water proofing bonding agent of FOSROC/SIKA/Pidilite or equivalent SBR mixed @ 1 ltr per 50 kgs of cemented water cement ratio 0.45 used as per manufacturer's instruction using shotcrete pumps and allied equipment, uniform thickness 30 mm to 50 mm including 15 mm thick plaster in cement mortar (1:4) uniform and smooth finished upto height of 10 mtr from ground level complete all as specified and directed by Engineer-in-charge.
Demolition of brickwork of stone/boulder masonary, build in cement mortar including all quions, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m means radius, built in cement mortar (1:4) complete all as specified and directed by Engineer-in-charge.
Dismantling structural steel work including doors, gates purline, post, grills gurad bar etc but excluding framed truss etc complete all as specified and directed by Engineer-in-charge.
Dismantling of plain or corrugated steel sheeting any gauge or thickness in roof coverings or wall cladding of any pattern and size complete all as specified and directed by Engineer-in-charge.
M&L for pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
M&L for pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
Excavating in post holes (or similar holes) in each n.ex 0.5 cum getting out, returning filing in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by Engineer-in-charge.
M&L in cement concrete type C-2 1:3:6 (40 mm graded aggregate) as in post hole, foundatin filing in mass concrete complete all as specified and directed by Engineer-in-charge.
S&F of steel work in tubular or angle iron trusses including special washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 complete all as specified and directed by Engineer-in-charge.
S&F of Fe-290 (Gde-E-165) rolled mild steel angle in roof trusses, posts etc, purlins, crane gantries rails etc complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide (1st grade quality) complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, inclu taking down roots of trees complete etc. complete all as specified and directed by Engineer-in-charge.
M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar (1:6), finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for applying two coat of oil bound distemper over one coat of primer on new surfaces incl 1.5 mm thick wall care putty, sand papering the puttied surfaces to form an even and smooth surface, using brush for priming coat and 1st coat and 2nd,final coat with airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair ofaces of brick work on concrete surfaces usinfg water proofing compound @ 3% by weight of cement/200 ml per 50 kg cement as per manufacturer instr finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. (Note: WPC to be paid separately)
Supply only integral water proofing compound ISI marked complete all as specified and directed by Engineer-in-charge.
M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using priming coat and 1st coat with brush and 2nd/final coat with airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose lenght of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engineer-in-charge.
M&L for rendering 5 mm thick in cement mortar (1:3) on ceiling finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for preparation of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and directed by Engineer-in-charge.
Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed by Engineer-in-charge.
M&L for applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and directed by Engineer-in-charge.
M&L for applying two coat of oil bound distemper over one coat of primer on new surfaces including sand papering the puttied surfaces to form an even and smooth surface, using priming coat and 1st coat with brush and 2nd coat/final with airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage ad certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surfaces complete all as specified and directed by Engineer-in-charge.
M&L for applying two coats of weather proof exterior emulsion paint using brush for first coat and second/final coat with Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max materials hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engineer-in-charge.
Taking up or down steel tubing and connection of 20 mm bore complete all as specified and directed by Engineer-in-charge.
S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall complete all as specified and directed by Engineer-in-charge.
Taking up or down steel tubing and connection of 15 mm bore complete all as specified and directed by Engineer-in-charge.
S&F for GI tubing 15 mm bore medium grade with all fittings and fixed to wall complete all as specified and directed by Engineer-in-charge.
M&L for cutting chases, pinning in making good to facings where required and pointings in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduct wiring etc, and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-charge.
S&F in repairs of bib tap 15 mm dia fancy type chromium plated cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed.
S&F in repairs of stop valve/angle cock 15 mm dia chromium plated fancy type cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed.
S&F in repair pillar tap 15 mm dia, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed.
S&F in repairs for vitreous china squatting pan orrisa pattern 580mmx440mm with integrated foot rest, S or P trpa including cement concrete bedding complete all as specified and directed by Engineer-in-charge.
S&F in repairs PVC valve less syphonic action type low level flushing cistern 10 ltr, white with inlet ball valve float and handle including bracket with flush pipe of polythene of low or high density 32 mm PVC complete all as specified and directed by Engineer-in-charge.
Taking down SWR pipe (any size and pattern including all fittings heads shoes bends etc complete all as specified and directed by Engineer-in-charge.
S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge.
S&F PVC (SWR) 110 mm bends any radius complete all as specified and directed by Engineer-in-charge.
S&F in repair vitrous china wash basin, white, flat back, size 630mmx450mm excluding taps, incl. waste coupling brackets and flaxible waste pipe complete all as specified and directed by Engineer-in-charge.
S&F in repair PVC connection 15 mm dia, 450 mm long including brass fly nuts at both ends etc. complete all as specified and directed by Engineer-in-charge.
Dismantling water tank of cap n.exc 500 ltr and removing off site complete all as specified and directed by Engineer-in-charge.
Dismantling water tank of cap exc 500 ltr but n.exc 1000 ltrs and removing off site complete all as specified and directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tanks triple layers (cylindrical vertical with closed top) 500 ltr hoisted and fixed in position inlc 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwd for iron pipe and fixed all as specified in SSR part I and directed by Engineer-in-charge.
S&F rotational moulded polyethylene water storage tanks triple layers (cylindrical vertical with closed top) 1000 ltr hoisted and fixed in position inlc 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwd for iron pipe and fixed all as specified in SSR part I and directed by Engineer-in-charge.
S&F in repair gun metal gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
RIZCON (BID ID -3434612)
P.H. CONSTRUCTION CO. (BID ID -3424898)
B. S BUILDERS (BID ID -3427590)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .