Provision of work services for increasing height of the boundary wall at station miniature range at AF Stn Memaura

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for plain cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate), cills, steps, parapets , copings,bond stone, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L Brick work with sub class-B bricks straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:4 com plete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed .

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) surfaces finished even and fair faces without using extra cement complete all as specified and directed.

M & L for Rendering 15mm thick on fair face of brick or concrete and stone surfaces incl finish even and smooth(without using extra cement) in CM (1:4)complete all as specified and directed..

M&L preparing of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparing of unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for applying two coats of exterior emulsion paint white or tinted on walls/ chajja/ facias/ fins on old surfaces/ new surface including preparing of surfaces existing treatment complete all as specified and directed

Dismantling of barbed wire fencing any size and any description complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F 0.5mm thick zinc coating of width 14mm razor wire medium barb design, hot dip galvanised steel wire coated with CLR anti corrosive paint fixed on swan neck angle iron complete all as specified and directed. Weight of wire shall not be less than 1kg/10RM.

Supply, stretch and fix concertina coil 600mm dia in stress position hot deep galvanised steel wire coated with CLR anti corrosive paints making diamond shape with the help of dove tail clips (18 SWG), the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of lug rings (24 SWG) including all fittings like fastener clips, steel lug rings etc complete all as shown in drg all as specified and directed. Note: (i)Stretch length of each coil shall be 6 mtr. (ii)weight of each coil shall not be less than 9kg.

S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and ddirected.

M & L for preparation of New or previously un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F framed work as in doors or gate of angle or other section with gusset plate, rail, braces etc or ornamental and intricate design including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 290(gde E-165) complete all as specified and directed.

M/S S J CONSTRUCTION

BAJAJ CONSTRUCTION

M/s Wadaihra Construction

PANKAJ AND BROTHERS