ILY-Construction of Annathana Koodam (100 Capacity) at Arulmighu Muthumariamman Temple in Thayamangalam Village, Ilayangudi Taluk , Sivagangai District .

Amount

Construction of Annathana Koodam (100 Capacity) at Arulmighu Muthumariamman Temple in Thayamangalam Village, Ilayangudi Taluk , Sivagangai District .

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work excavation for Open foundation in all classes of soils and sub soils and to the depth as may be directed except in hard rock, requiring blasting, including initial leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing the surplus earth within the compound in places shown with initial leads and lifts, clearing and levelling the site, shoring strutting baling of water wherever necessary etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and FILLING GRAVEL Supplying and filling in foundation and basement with filling crushed stone sand in layers of not more than 15cm thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Cement concrete 1:5:10 (one cement five sand and ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting,curing,dewatering, side shuttering, wherever necessary including curingetc.,complete complying with standard specification and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement concrete works such as column footings, column pedestals,plinth beams,grate beams,staircase steps,etc.which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75 cm centre to centre or at suitable intervals etc.complete in all floors complying with standard specifcation.(Payment for centering shall be given after the concrete is laid)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement concrete works such assquare/rectangular column etc.complete in all floors complying with standard specifcation.(Payment for centering shall be given after the concrete is laid)

Supplying and erecting steel centering for sides and soffits including strutting up to 3.29 metre height for plain surface such as RCC square or rectangular columns,top and bottom slabs of sunshade boxing sill slabs etc., with necessary facia etc., with all cross bracings using mild steel B.G.,10 sheets of size 90cm x 60cm stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for bording laid over silvar (oak) country wood joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

UP TO basement level

Above basement level ground floor

Supplying and fabricating and placing in position M.S. grills for reinforcement for all RCC works,including cost of rods, straightening,bending,cracking typing grills,with 18 gauge galvanished binding wire and placing the grill in position etc., complete and as directed.

Brick work in CM 1:6 (One Cement and Six sand) using besd qulity country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for walls including cost and conventance of all labour and materials including scaffolding curing finishing etc., complete complying with standared specification and as directed etc.,complete

foundation and basement level

Above basement level ground floor

Brick Partition Wall in CM 1:3 (One Cement and Three sand) using besd qulity II class country bricks 8-3/4" x 4-1/4" X2-3/4" for walls including cost and conventance of all labour and materials including scaffolding curing finishing etc., complete complying with standared specification and as directed by the departmental officers.

Ground floor

Plastering with C M 1:5 (one cement and five sand) 12mm thick including scaffolding finishing curing etc.,complete complying with standard specification and as directed by the departmental officers.

Special Celing plastering and finishing the exposed surface of RCC items of work such as slabs , beams, sunshades, with CM1:3(One cement and Three Sand ) 10mm thick including hacking the curface and providing cement mortar nosing, beading wherever necessary using the sand mix etc., complying with standard specification.

Weathering course Concrete using best Quality brocken jelly of size 20mm uniform gange in pure slacked line (no sand to be used) the proportion of brick jelly to lime being 32:12 1/2 by volume and laid over the RCC roof slab in a single layer and consolidated to the required and designed finished thickness by beating the concrete by wooden beaters of approved pattren keeping the surface constantly wet by sprinkling lime jaggery water etc.complete complying with standard..

Finishing the top of roof with one course of approved best quality machine pressed square tiles of size 200x200x20mm laid in cement mortar 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to indian standard as approved by the depatmental officers at 2% by weight of cement used and joints pointed neatly to full depth of tiles with same mortar mixed with water proofing compound and red oxide etc complete

Supplying and fixing in position best approved of ISI qua;ity PVC rain water down fall pipes of 110mm dia with working having a pressure of 4 kg/Sq.m including cost of necessary PVC shoe , PVC bend, Grating of requried diameter and special clamps , brass screws, nails, etc. and fixing of cast iron grating at junction of parapet and the RCC roof slab including finishing neatly etc. complete . the rate shall be inclusive of cast of removable iron grating. The size of teak wood plug to be used shall be 150mm x 25mm infront and 200 x 75mm in all other sides with a depth of 100mm,the pipes to be fixed by means of U clamps screwed to the plugs as directed by the depardmental officers complying with standard specification.TNBP:SS 107.

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with cement Concrete Anti-skit Tiles (Eurocon)to required shape and design of 20mm thick approved quality and colour laid in cement mortar 1:3 (one cement and three sand)20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40kg./sq.m.,curing,etc.,complete complying with standard specfication and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing the walls with best approved first quality colour glazed tiles of 300 x 200mm set in CM 1:2 ( One cement and two sand )10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg./sq.m.neatly and curing in all floors etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coad etc.,complete with standard specifications.

Supplying casting and fixing of RCC precast jolly of the following thickness in C.C.1:2:4 (one cement two sand four stone jelly) using 20mm broken granite stone jelly excluding cost of reinforcement grill in position but including cost of all materials moulding charges casting of jally finishing,curing and fixing the jally in position and pointing the joints with cement mortar1:3 to full depth in all floors etc.complete complying with standard Specification. Precast RCC jolly-80mm

Supplying and fixing C.RCA pressed box or 16 gauge of as per standard Specifications. For door and other similar fixing hold fast in frames and masonry etc complete in all floors.

Supplying and fixing Solid core partical board flush door shutters with both sides 3mm thick commercial ply of 35mm thick with T.W internal lipping (internal alround) with necessary adheshive and C.P.screws ,including fixing of aldrops tower bolts hinges and lock strike plates,putty,fevical,varnish for T.W. lipping with thinner colouring agent etc.,The rate includes cost of materials and cost for aluminium furniture fittings such as 3 nos Alu.hinges 125mm 1 no alu.aldrop 200 x 16mm, 1 no Alu, tower bolt of 150 x 12mm and 1 no Alu, 100mm D type Handle 1 no door stopper with rupper bush incase of single leaf door inclusive of labour charges for fixing in position etc.,complete all Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI Specfication 1868/1968 for anodic flim thickness of not less than 15 microns, the rate is inclusive cost of fevical and fixing charges transportation loading unloading and all other incidential charges handling charges etc.,complete complying with standard specification.As per SOR 2020-2021 P no 48 Item no 120

Supplying and fixing solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames 15mm MS Square tubes for top lock and bottom rails.the steel tubes shall be covered with 5mm thick solid PVC sheets.shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.the over all size of styles shall be 50mm x 30mm. The over all size of top rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with sutiable rabate for housing the shutter including sliding arrangements.

Supplying and fixing UPVC (Un-Plasticized Polyvinylchloride) Windows of casement type (open) from theprofile the size of outer frame 60mm x 58mm andshutter profile are reinforcement with GI/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates ashandle. The corners and joints should be colour glass 4mm thick should be provided to thecleaned. Radiations free pin headed plain or brownwelded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong lockingsystems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. Thewindow should be fixed to the wall with 100% packing.SOR page no 65

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Louvered Ventilators of from the profile the size of outerframe 60mm x 58mm and shutter profile size of 60 x 78mmboth profiles are reinforced with GI/1mm 125GSM and100% corrosion free, the profile are multi chamberedsections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided inthe louvers. The window should be fixed to the wall with100% packing with screws and silicon packing all round theframes. The ventilator should be got approved from theExecutive Engineer before use on work.SOR page no 66

Painting two coats with apporved water based Interior emulsion paint over cement plasterd wall surface priming coat including thorough scrapping, clean removal of dirt etc., and coveyance of all matierials all labour charges brushes,clening,preparing the surface scaffolding and curing charges etc.,complete.

Painting Two Coat with Water based Exterior Emulsion Paint including over priming coat in cement plasterd wall surface in all floors including all cost of materials brushes, scaffolding charges etc., complete complying with standard specification.

Painting One Coat with White Cement for priming Coat complete.complying with Standard specification in all floors including all cost of materials brushes, scaffolding charges etc., complete complying with standard specification.

Painting Two Coat with White emulsion paint for Celling Plastering complete.complying with Standard specification in all floors including all cost of materials brushes, scaffolding charges etc., complete complying with standard specification.

Painting New iron work such as steel doors, windows, ventilators windows bars balustrades etc.,with two coats of best approved quality Synthetic enamel paint over a primring coat with ready mixed primer of approved quality Excluding cost of priming coat etc., complete complying with standard specification ( The make, quality and collour of paint should be got approved by the Executive Enginneer before use on works)

Water Supply arrangements

Supplying laying and jointing PVC pipes (having working pressure 10Kg/Sq.cm) of approved quality and best veriety conforming to BIS of the following dia including cutting threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plug, PVC clamps and screws making holes on the wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/ cement concrete and plastering neatly whever necessary scaffolding charges etc., complete complying with standard specification

32mm dia pipe below ground level

32mm dia pipe above ground level

25mm dia pipe above ground level

Supplying PVC specials (with working pressure 10Kg/sq.cm) in water supply arrangements (both in internal & external water supply arrangements). Note: Since the labour for cutting threading / plastering sundries have already been included under pipe line item of works, no separate provisions for fixing PVC specials need to be allowed.

Coupler

15 mm dia

20mm dia

25mm dia

32mm dia

Elbow

15 mm dia

20mm dia

25mm dia

32mm dia

15 mm dia

20mm dia

25mm dia

32mm dia

15 mm dia

20mm dia

25mm dia

32mm dia

Reducer

20mm X 15 mm

25mm X 20mm

32mm X 25mm

Reducer Elbow

20mm X 15 mm

25mm X 20mm

32mm X 25mm

Supplying and fixing in position first quality and approved variety of Gun metal gate valve / Wheel valve with BIS make of the following dia including cost of shellac, thread balls etc., complete complying with standard specification ( for both internal and external water supply arrangements)

Fixing wheel valve of dia 25mm

Fixing wheel valve of dia 32mm

Supplying and fixing in position 15mm dia brass CP screw down tap/ pillar tap (heavy duty) of approved make conforming to BIS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary.

Pillar Tap

Swan Neck Tap

Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed by departmental officers etc.,

Sanitary Arrangements

Supplying and fixing in position best quality and approved make indian made white / colour glazed earthernware wash hand basin of size 550 X 400mm (without pedestal)

Supplying and fixing in position of Indian make Water Closet Oriyya Type (White) of size 580mm X 440mm of approved uality with 'p' or 's' trap.

Supplying and fixing in positon European Water Closet with "P" or "S" Trap with Double falpped seat and seat cover with Brass Hinges and 10 litre capacity low level flushing tank with all internal fittings etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position of P V C Nahini Trap of size 100 x 75mm with best stainless Steel Gratings of approved make and quality, fixed over a bed of of brick jelly concrete 1:2:5 (One part of Lime, Two parts of Sand and Five parts of 40mm size brick jelly) and finished with cement mortar 1:3 ( One part of Cement and Three parts of Sand) including cost and conveyance of all materials and labour charges including dismantling the masonry works wherever necessary and making good etc complete

Supplying and fixing in position of PVC Ventilating shaft 110mm dia and 3m height including cost and conveyance of all materials and all labour charges for cutting fixing in position etc., complete.

Supplying and filling 40mm HBG stone jelly in filter bed / Dispersion trench including cost and conveyance of all materials and labour charges for fixing in position etc., complete.

Supplying and fixing in position of bewelled edge mirror of size 600x450 mm quality including cost of rawal plugs brass screws and conveyance of all materials and labour charges for fixing in position etc., complete.

Supplying and fixing in psition of c.p towel rail of size 60cm quality 20mm with brackets for best quality including cost of rawal plugs brass screws and conveyance of all materials and labour charges for, fixing in position etc., complete.

Supplying and fixing in psition best quality PVC soil / waste pipes of various dia having 6kg/sq.cm pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws etc., and making connection to all sanitary fitting, dismantled portion to the original condition, including testing for any leakages etc., complete complying with standard specifications. ( The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid seperately in the cases where the pipe lines are proposed to laid.

Above Ground Level

Above Ground level 110mm dia having 6kg/sq.cm

Above Ground level 90mm PVC pipe (221.30+157..97= 379.27

Above Ground level 75mm PVC pipe

Below Ground level

Below Ground level 110mm PVC pipe

Below Ground level 90mm PVC pipe

Below Ground level 75 mm PVC pipe

Supplying and fixing in psition PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the wall and giving connection of PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. ( The PVC specials should be got approved by the Executive Engineer before use on works).

160mm dia PVC Elbow

160mm dia PVC door Elbow

160mm diaTee

160mm dia PVC Plain Bend

110mm dia PVC Elbow

110mm dia PVC Door Elbow

110mm dia PVC Tee

110mm dia PVC Tee with Single Door

110mm dia PVC Plain Bend

75mm dia PVC Elbow

75mm dia PVC Door Elbow

75mm dia PVC Tee

75mm PVC Tee with Single Door

75mm dia PVC Plain Bend

Supplying and fixing in psition PVC cowls of the following dia of approved quality confirming to BIS, etc., complete complying with standard specifications. ( The PVC cowls should be got approved by the Executive Engineer before use on works).

110mm dia PVC Cowl (including w.c top level pipe)

75mm dia PVC Cowl trap top level

Supplying and filling 40mm HB Jelly in Dispersion trench etc complete cuplying with standard specification.

Supplying and filling 20mm HB Jelly in Dispersion trench etc complete complying with standard specification

Supplying and fixing stone ware pipe 150mm dia tight joints etc cuplying with standard specifications

Supplying and fixing stone ware pipe 150mmdia Loose joints etc complying with standard specifications.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

VADIVELMURUGAN S K (BID ID -1349448)

BALASUBRAMANIAN D (BID ID -1349443)