Special Repair OF HHUP lab (now SDE P-II,Office) at Rewari in rewari District.

Amount

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick including concrete base (HSR 8.25)

Conglomerate floor 25 mm thick cement concrete topping 1:2:4 (HSR 14.8)

Providing & fixing vitrified tiles of size 600 x 600mm of approved made in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (HSR 14.89) Note:- Tiles shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, & RAK. (HSR 14.89) (Note: double charged tiles shall be used)

Providing and fixing vitrified tiles of size 600x600mm of approved make in skirting / dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK(Note: double charged tiles shall be used) (HSR 14.90)

Providing and fixing ceramic-tiles / anti-skid tiles of size 400x400mm or above size of approved make in floors laid in any pattern over base of 20 mm thick Cement Sand Mortar 1:3 and jointed with white cement slury mixed with pigment to match the shade of tiles. [HSR 14.91] Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA,RAK.

Providing and fixing 1st quality ceramic-glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Giazed tiles 300mm x 450mm. [HSR 14.92 b]

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled (a) door (HSR 8.18 (a))

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete (HSR 18.34) (a) door and window frame of size 89 mm X 50 mm with 40 mm wide single rebate

(d) door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate

Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks / cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same position. (Make: Duro, Green, Kitply) (HSR 17.93 (a) - Note 1 under 17.18) (iii)

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Cost of aluminium fittings complete for doors and windows, such as tower bolts,handles,etc., and screws for these fittings (excluding sliding bolt) (a) for single leaf shutter (HSR 17.72 (a))

Providing and fixing sliding bolt with nuts and screws,etc.,complete (b) aluminium (i) size 300 mm X 16 mm (HSR 17.83 (b) (i))

Scraping (a) white wash and colour wash (HSR 8.32 (a))

Preparation of plastered surface for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk miti including finishing the surface to the required finish complete (HSR 16.52)

Distempering with washable oil bound distemper (of approved manufacture) one coat on old distempered work. (HSR 16.59)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work (HSR 16.60)

Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (16.7)

Providing two coats of exterior acrylic emulsion paint. (b) Ist Quality (HSR 16.79)

Providing and fixing polycarbonate sheet 1.25mm thickness on Gates and grills excluding the cost of MS framework but including the cost of nut bolts, welding rods complete in all respect as per direction of Engineer - in - charge (HSR 18.43)

Supplying, hoisting and placing in position tubular trusses including runners, purlins, consisting of steel tubes conforming to I.S. specifications of tested quality duly welded with fillet welds 6 mm thick through-out including wind bracing. Open end of pipe sealed with 3 mm thick plate including the cost of nuts and bolts where bolts connections are specified at flange joints including one coat of ready mixed red oxide zink cromate primer of approved quality assembling and fixed in position complete in all respect. (HSR 18.14)

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing over flow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks completein all respects to the satisfaction of Engineer-In-Charge. (Except civil work).(HSR 30.119) (c) 1000 Ltr. capacity

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) 750mm x 25 MM DIA C.P.BRASS ADJUSTABLE (HSR 30.68 (a))

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc (a) C.P.BRASS (i) Soap dish large (HSR 30.70 (a) (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (e) C.P. brass towel ring (HSR 30.68 (e))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) INDIAN MAKE (i) 600mm X 450mm (HSR 30.71 (a) (i))

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) (a) One way (HSR 30.78 a)

PROVIDING AND FIXING POSITION BEST INDIAN MAKE FLAT BACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH CONSISTING OF : - (i) Flat back lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval of the Engineer-in-charge). (ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I.AUTOMATIC FLUSHING CISTERN, PAINTED WITH non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside complete with screwed 15 mm pipe; (iii) PAIR OF R.S.PR C,I. PAINTED BRACKETS AND BRASS COUPLINGS; (iv) Standard size G.I.FLUSH PIPE WITH C.P.BRASS WALL CLIPS AND UNIONS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOOR AND PAINTING OF FITTINGS ETC. (as required by the Engineer-in-charge). (i) White (HSR 30.19 (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above. (i) White (HSR 30.6 (i))

Providing and fixing in position best Indian make Lavatory Suites (with full anti -splash rim in viterous chinaware & all other necessary fitting, White, 610mm x 510mm with one No. tap (HSR 30.42 (iii)

Providing and fixing in position best Indian make Pedestal fittings of citreous chinaware complete (as required by the Engineer-in-charge) (White) (HSR 30.44 (i))

Dismantling disjointing, removal and carriage to stores, G.I. pipelines, specials, valves and fittings. (HSR 28.48) (a) Main supply pipe 25mm

Providing and laying CPVC pipe of reputed firm with special Tees, bends, sockets, elbow etc. inside building and testing etc. complete i/c cutting threading i/c cost of specials complete in all respect (As desired by Engineer-in-Charge) (NS) (b) 25 mm internal diameter pipe line

DISMANTLING H.C.I.SOIL PIPES (a) 100 mm internal diameter (HSR 30.96 (a))

DISMANTLING H.C.I.SPECIALS (a) 100 mm internal diameter (HSR 30.97 (a))

Providing & fixing PVC Rain Water pipe of 6 Kg Pressure of ISI mark in cement mortar during masonary work. (HSR 13.89) (a) 100MM dia PVC pipe 6 Kg Pressure

Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 Mtrs. (HSR 6.6)

Cement Concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth. (HSR 10.39)

First class brick work laid in cement sand mortar 1:6 in foundation plinth. (HSR 11.2)

First class brick work laid in cement sand mortar 1:6 in 1st storey upto 4 metre above plinth level. (HSR 11.7)

12mm thick cement plaster on walls (1:6). (HSR 15.7).

15mm Thick Cement Plaster 1:6 on the rough side of single or half brick wall. (HSR 15.12).

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. [HSR 16.25]

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (HSR 16.58).

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12).

Recovery Items:- i) The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, door & window shutters have been calculated taking assumption that 80% of theoretical material Old doors with Chowkats @ 200 /- Each Note:- In Case of any discrepancy in nomenclature / unit of items of BOQ depicted in the DNIT, the nomenclature / unit of MoRT&H (5th Revision) / HSR shall be applicable.

THE BASTI RAM CO OPRETIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED

Surender Singh, Contractor, Rewari

JAYI BUILDWELL LLP

Mukesh Raj Contractor

Pawan