Annual Comprehensive Maintenance Contract of CMPDI colony and Office building, Bhubaneswar

Amount

Supplying and filling in plinth with locally available sand under floors including, watering,ramming consolidating and dressing complete.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Extra for concrete work in superstructure above floor V level for each four floors or part thereof.

Brick work with non modular fly ash lime bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. Non decorative finish

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

12 mm cement plaster of mix : 1:6 ( 1 cement : 6 fine sand)

12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. one coat

White washing with lime to give an even shade - Old work (one or more coats)

Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint including lime putty and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Finishing walls with acrylic smooth exterior paint of required shade Old work ( one or more coats applied @ 0.90 litre/10 sqm).

Refixing old glass panes with putty and nails

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Renewal of old putty of glass panes (length)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound.

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (Parryware,Hindware, Cera or any other brand approved by EIC)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(Parryware,Hindware, Cera or any other brand approved by EIC)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device ( handle lever ) conforming to IS;7231,with all fitting and fixtures complete. (Parryware,Hindware, Cera or any other brand approved by EIC) 10 litre capacity- white10 lit

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid (Parryware,Hindware, Cera or any other brand approved by EIC)

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (Parryware,Hindware, Cera or any other brand approved by EIC) Flat back wash basin of size 550x400mm.

Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. (Parryware,Hindware, Cera or any other brand approved by EIC)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing unplasticised PVC connection pipe with brass unions: 45cm length 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: (Parryware, Hindware, Cera or any other brand approved by EIC) 150 mm diameter

Providing and fixing C.P. brass bib cock of Plaza, Jaguar or any brand approved quality conforming to IS:8931 as approved by Engineer-In-Charge. (Parryware, Hindware, Cera or any other brand approved by EIC) 15 mm nominal bore

Providing and fixing C.P. brass stop of cock (concealed)of Plaza, Jaguar or any brand approved by EIC standard design and of approved make conforming toIS:8931. (Parryware, Hindware, Cera or any other brand approved by EIC) 15 mm nominal bore

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineerin-Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/ sqm)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing services for works related to masonry, carpentry and other miscellaneous skilled works as per direction of Engineer-in-charge for a period of 8 hrs a day

Providing services for miscellaneous nature of unskilled work as per direction of Engineer-in-charge for a period of 8 hrs a day

Providing services for plumbing works inside quarters and outside on ground as and when required as per direction of Engineer-in-charge for a period of 8 hrs a day

Providing and Fixing GI nipple upto 150mm length including making thread with required fittings 15mm dia

Providing and Fixing GI nipple upto 150mm length including making thread with required fittings 20mm dia

Providing and laying in position white cement for maintenance/ repair works including all labour complete.

Providing and laying in position omiseal for different plumbing job

Providing and Fixing Flush Tank Lever Handle set of low level cistern of aproved quality, colour and make complete as per direction of Engineer-In-Charge

Providing and Fixing Syphon flush tank of low level cistern of aproved quality, colour and make complete as per direction of Engineer-In-Charge

Providing and fixing Stainless Steel towel rail complete with brackets fixed with CP brass screws with concealed fittings arrangement of approved quality and colour. (Parryware, Hindware, Cera or any other brand approved by EIC) 600 mm long towel rail with total length of 620 mm, width 86 mm and effective height of 63 mm, weighing not less than 360 gms.

Providing and Fixing brass spindle for bib cock/stop cock/pillar cock as approved by Engineer in charge. (15mm)

Providing and fixing 750 mm glass shelf with edges round off with guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing Stainless steel grating of approved quality and colour. Circular type 100 mm nominal dia

Providing and fixing C P brass Waste Coupling for wash basin and sink, of approved quality and colour complete as per direction of Engineer-In-Charge. 32mm (Parryware, Hindware, Cera or any other brand approved by EIC)

Providing and fixing C.P. brass 2 in 1 bib cock of approved quality as approved by Engineer-In-Charge. (Parryware, Hindware, Cera or any other brand approved by EIC) 15 mm nominal bore

Providing and fixing C.P. brass angluar valve of approved quality conforming to IS standards and as approved by Engineer-In-Charge. (Parryware, Hindware, Cera or any other brand approved by EIC) 15 mm nominal bore

Providing and fixing C.P. brass Pillar Cock of approved quality conforming to IS standards and as approved by Engineer-In-Charge. (Parryware, Hindware, Cera or any other brand approved by EIC) 15 mm nominal bore

Providing and fixing Aluminium sheet of 1 mm thickness on existing doors with all required material and labour complete as per direction of Engineer-In-Charge

Making available electric/diesel welding machine with all required accesorries , consumables including all labour and material cost as directed by Engineer-in-charge

Cleaning of water reservoir after dewatering completely then rubbing the wall and floor with bleaching powder and sweeping out the rubbishes. All the above operation to be completed within a rigid time frame.Under ground water sump of 2 lacs litre capacity including dewatering of dead stock of 20000 ltr. (approx.)

Cleaning of water reservoir after dewatering completely then rubbing the wall and floor with bleaching powder and sweeping out the rubbishes. All the above operation to be completed within a rigid time frame. O.H. water tank of 40000 ltr. Capacity

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (work exposed on wall). 15mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (work exposed on wall). 20 mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (the external wall from 9th Floor to Ground floor of all (B, C, D) Type apartment). 25mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (the external wall from 9th Floor to Ground floor of all (B, C, D) Type apartment). 32 mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (the external wall from 9th Floor to Ground floor of all (B, C, D) Type apartment) 40mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (External work ). 50mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes, including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work 65 mm dia pipe

Providing and laying UPVC pipe including all UPVC plain and brass threaded fittings including fixing the pipes with clamp at metre spacing . This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of EIC (work exposed on wall) 80 mm dia pipe

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) ball valve: 80 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) ball valve: 65 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) ball valve: 50 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) ball valve: 40 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) Flange Adapter: 80 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) Flange Adapter: 65 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) Flange Adapter: 50 mm nominal bore

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) Flange Adapter: 40 mm nominal bore

Removal of existing G.I./UPVC pipe line on the external wall from 9th Floor to Ground floor of all (B, C, D) Type apartment of CMPDI Colony including all labour and material for staging etc. but excluding the cost of pipes and fittings.

Providing and fixing Bronze Globe Valve (Screwed): 65 mm nominal bore (Kartar, Sant, Zoloto or any other brand approved by EIC)

Providing and fixing Bronze Gate Valve (Flanged): 65 mm nominal bore (Kartar, Sant, Zoloto or any other brand approved by EIC)

Providing and fixing G.I Flange in existing pipe including cutting and making connection for fixing of flanges: 65 mm nominal bore

Providing and fixing HDPE pipes of PE 80 of 6.0 kg/cm2 and making connection with 40 mm dia GI pipe including trenching and refilling of soil complete with all required fittings: 32 mm nominal dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. as per instruction of Engineer-in-Charge 150 mm diameter

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Providing Stailess steel dustbin with MS Stand of minimum capacity 50 Ltrs

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : Sliding door bolt 300X16 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm

Finishing walls with acrylic smooth exterior paint of required shade Old work ( Two or more coats applied @ 1.67 litre/10 sqm over existing cement surface

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing brass ball valve with handle including all the fiiting required and complete as per direction of Engineer in Charge. (kartar, sant and Zoloto) 25 mm nominal bore

Providing and fixing C.P. brass angle cock self closing system Push Cock Faucet (Wall Mount Installation Type) of approved quality conforming to IS standards and as approved by Engineer-In-Charge. 15 mm nominal bore

Providing rubber washer for Bib cock or, Pillar cock, Stop cock (concealed type or, exposed type) -15mm size

Cleaning of water reservoir after dewatering completely then rubbing the wall and floor with bleaching powder and sweeping out the rubbishes. All the above operation to be completed within a rigid time frame. a) Under ground water sump of 01 lacs litre capacity including dewatering of dead stock

Cleaning of 02 (two) nos (1 pair) of Syntex Over Head tank of capacitites 5000 litres and 2000 litres including dewatering completely and then rubbing the wall and floor with bleaching powder and sweeping out the rubbishes. All the above operation to be completed within a rigid time frame

Providing and fixing bronze Globe valve of approved quality (screwed end) : (Zoloto, Sant and Kartar) 65 mm nominal bore vertical

Providing and fixing false ceiling at all height including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks)

Operation & Non-Comprehensive Maintenance of all valves, pumps, sprinkler system, firefighting sensor panel, hooters, alarm systems, wet raiser and all other firefighting setup present in the CMPDI Office building and CMPDI Colony, Bhubaneswar as per directions of EIC (Excluding the cost of spares required for the above work)

Providing and fixing butterfly valve (PN-16) of approved brand complete as per direction of Engineer-In-Charge 100 mm Nominal Bore

Providing and fixing double door hose box of approved brand complete as per direction of Engineer-In-Charge

Providing and fixing 12 meter hose pipe reel of approved brand complete as per direction of Engineer-In-Charge 25 mm Nominal Bore

Providing and fixing PVC 25 mm Fire hose reel nozzle of approved brand complete as per direction of Engineer-In-Charge

Providing and fixing SS/Aluminium/Gunmetal 63 mm Fire hydrant nozzle of approved brand complete as pe r direction of Engineer-In-Charge

Providing and fixing steel ball valve of approved brand complete as per direction of Engineer-In-Charge 25 mm Nominal Bore

Providing and fixing pressure gauge of approved brand complete as per direction of Engineer-In-Charge

Larva control treatment by spreading of antilarva chemicals i.e. BI-Larv @ 5 gm per 1 litre(24 Operations per year) as per instruction of Engineer in Charge.

Street fogging with heavy duty machine trolley mounted (24 operation per year) by spraying Kingfog and Diesel in the ratio of 1/2 litre chemical and 10 litres diesel for 1 operation including cost of chemical, petrol, diesel, hiring charges of vehicle for carrying the fogging machine as per instruction of the Engineer-in-charge

Snake control operation to keep the snakes out from the residential & non-residential unit by way of spreading Titatox @ 1/2 kg. per block or carbolic acid in required dilution. Total 12 operation in a year (4 close interval operations during rainy season).

Providing & removing glue trap as and when required inside the houses. In case of snake intrusion in residential units, same will be caught safely and left in outside colony premises.

Safe removal of beehives found anywhere inside the colony premises

Providing and displaying of Areca Palm having ht. 1.20 m to1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Croton Baby Golden Punctatum Aureum having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge.

Providing and Displaying Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in 20 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying Kochia well developed fresh & healthy 20 to 25cm ht. lush green well shaped in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge.

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Open spaces.(1Mali for 1.00Acre)

Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos)

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water) Trees Plant

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor.

Providing and displaying of fertilizers, pesticides and insecticides Urea 40%

Providing and displaying of fertilizers, pesticides and insecticides DAP

Providing and displaying of fertilizers, pesticides and insecticides Neem Khalli

Providing and displaying of fertilizers, pesticides and insecticides Rose Powder

Providing and displaying of fertilizers, pesticides and insecticides B.H.C Powder

Providing and displaying of fertilizers, pesticides and insecticides Biozen

Providing and displaying of fertilizers, pesticides and insecticides Roger( Dimethoate 30% EC)

Sweeping/cleaning of colony premises as per scope of work including collection, carriage and disposal of garbage manually or mechanically daily as per instruction of E I C or his authorised representative.

Moping/washing of floors using necessary cleaners as per scope of work and instruction of EIC or his authorised representative. (Frequency twice a week)

Sweeping, mopping cleaning of toilets as per scope of work including all fittings and fixures using all necessary cleaners etc., atleast thrice per week to the satisfaction of Engineer-in-Charge or his authorised representative (Frequency twice a week)

Collection of garbage from all four garbage chutes as well as other area of CMPDI Colony premises and disposal of the same at the municipal garbage dump site or any other suitable location including cost of labour and transporatation (Frequency thrice per month)

Supply of Toilet cleaner (Harpic or equivalent) as per instruction of Engineer-In-charge

Supply of Floor cleaner (Lizol or equivalent) as per instruction of Engineer-In-charge

Supply of Bleaching powder as per instruction of Engineer-In-charge

Providing services for miscellenous nature of unskilled work as per direction of Engineer-in-Charge

Cleaning of all the septic tanks, sewer chambers present in the CMPDI colony including cleaning of surrounding area and disposal of all the waste outside the colony premises to the desired place and applying necessary cleaners as per instruction of EIC or his authorised representative. (All the materials required for this job are included)

Cleaning of all the chajjas and roofs present in the CMPDI colony including application of chemicals to restrict the plant growth whereever necessary and disposal of all the waste outside the colony premises as per instruction of EIC or his authorised representative. (All the materials required for this job are included)

Cleaning of all the drains adjacent to the boundary wall including connecting drains both inside and outside for free flow of water (all the storm, kitchen, bathroom etc.) from the colony including disposal of all the waste removed to the nearest BMC dustbin outside the colony as per instruction of EIC or his authorised representative. (All the materials required for this job are included)

Sweeping/cleaning of floors inside office building (excluding toilet/washroom ,electrical room and sub-station) including dusting of all table, chair, computers, self, almirah, file cabinet, partitions etc. collection and lifting of garbage/ waste from floors and dustbin and dumping it in a waste land/dumping yard out side the office compound including collection, carriage and disposal of garbage manually or mechanically daily as per instruction of E I C or his authorised representative.

Moping/washing of floors inside office building using necessary cleaners as per instruction of EIC or his authorised representative.

Sweeping, mopping cleaning of all toilets of office building including all fittings and fixures using all necessary cleaners, room fresheners and napthalin etc., atleast twice a day to the satisfaction of Engineer-in-Charge or his authorised representative

Supply of phenyl as per instruction of EIC

Supply of Harpic as per instruction of EIC

Supply of Napthalene balls as per instruction of EIC

Supply of room freshner as per instruction of EIC

Supply of Hand Wash as per instruction of EIC

Sweeping, moping, upkeeping and caretaking of guest houses & transit houses, toilets and all the surrounding areas, drains daily twice including collection, carriage and disposal of garbage manually or mechanically daily as per instruction of E I C or his authorised representative. (all materials required for this job are included)

Cleaning and washing of beddings like towels, blankets, bedsheets, mosquito nets, napkins etc., present in the transit and guest houses as per instruction of EIC or his authorised representative. (all materials required for this job are included)

Supply of Hand Wash as per instruction of EIC or his authorised representative.

Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with the 2x1.5 sq.mm + 1.1.5 sq.mm of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring along with earth wire with 2x2.5 sq.mm + 1x2.5 sq.mm of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with 2x4 sq.mm + 1x4 sq.mm of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with 2x6 sq.mm + 1x6 sq.mm of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Circuit/sub-main wiring in PVC conduit : Wiring for circuit/submain wiring alongwith earth wire with2x10 sq.mm + 1x10 sq.mm of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Supplying and drawing of 3x1.5 sq.mm FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required.

Supplying and drawing of 3x2.5 sq.mm FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required.

Supplying and drawing of 3x4 sq.mm FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required.

Supplying and drawing of 3x6 sq.mm FR PVC insulated copper conductor single core cable in the existing surface/recessed steel / PVC conduit as required.

Supplying and fixing of 5/6 amps switch on the existing switch box/cover including connections etc. as required

Supplying and fixing of 15/16 amps switch on the existing switch box/cover including connections etc. as required

Supplying and fixing of 3 pin 5/6 amps socket outlet on the existing switch box/cover including connections etc. as required

Supplying and fixing of 6 pin 15/16 amps socket outlet on the existing switch box/cover including connections etc. as required :

Supplying and fixing Bell push switch on the existing switch box/cover including connections etc. as required

Supplying and fixing of metal box of 180 mmx100mmn x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps.socket outlet and 15/16 amps. piano type switch connection , painting etc. as required.

Supplying and fixing metal box of 75 mm X 75 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required.

Supplying and fixing metal box of 100 mm X 100 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required.

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required.

Supplying and fixing metal box of 150 mm X 150 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc. as required.

Supply and fixing 3 pin 5 A, ceiling rose on the existing junction box/wooden block including connection etc as required.

Supplying and fixing of call bell/buzzer suitable for single phase, 230 volts, complete as required.

Numbering of ceiling fan/ exhaust fan/wall mounted fan/pedestal fan/ fluorescent fittings as required.

Wiring for light point / fan point/exhaust fan /call bell point with 1.5 sqmm FR PVC insulated,copper conductor, single core cable in surface/recessed steel / PVC conduit , with piano type switch , phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as required. Group A - 3 mtrs

Wiring for light point / fan point/exhaust fan /call bell point with 1.5 sqmm FR PVC insulated,copper conductor, single core cable in surface/recessed steel / PVC conduit , with piano type switch , phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc as required. Group B - 4 mtrs

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Supply and fixing 5A to 32 A rating 240/415V ,10 kA "C"- curve miniature circuit breaker suitable for inductive load for Single pole in the existing MCB DBs complete with connections , testing , commissioning etc. as required.

Supply and fixing 5A to 32 A rating 240/415V ,10 kA "C"- curve miniature circuit breaker suitable for inductive load for Double pole in the existing MCB DBs complete with connections , testing , commissioning etc. as required.

Supply and fixing 5A to 32 A rating 240/415V ,10 kA "C"- curve miniature circuit breaker suitable for inductive load for Triple Pole and Neutral in the existing MCB DBs complete with connections , testing , commissioning etc. as required.

Supply and fixing of PVC brass batten/ angle holder including connections etc as required .

Providing and fixing 30 kA, 100 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required .

Providing and fixing 36 kA, 250 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required .

Providing and fixing 50 kA, 400 amps four pole rating and breaking capacity and pole MCCB with thermomagnatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel ,making connections etc. as required .

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 4 core 16 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3 1/2 core 25 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for3 1/2 core 35 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3 1/2 core 50 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3 1/2 core 70 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3 1/2 core 95 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3 1/2 core 120 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3 1/2 core 185 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through joint with cast resin compound including ferrules and other jointing materials for 3 1/2 core 35 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through joint with cast resin compound including ferrules and other jointing materials for 3 1/2 core 50 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through joint with cast resin compound including ferrules and other jointing materials for 3 1/2 core 70 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through joint with cast resin compound including ferrules and other jointing materials for 3 1/2 core 95 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through joint with cast resin compound including ferrules and other jointing materials for 3 1/2 core 120 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through joint with cast resin compound including ferrules and other jointing materials for 3 1/2 core 185 sq.mm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable 1.1 KV grade as required :

Supply and making straight through cable jointing heat shrinkable jointing kit with all accessories including ferrules suitable for 70 sq.mm of 3 core XLPE aluminium conductor cable 11 KV grade as required :

Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 70 sq.mm of 3 core XLPE aluminium conductor cable 11 KV grade as required :

Supply and fixing of 415V, 63A, with 3 PP, 'C' CURVE,10kA breaking capacity TPN MCB (Make-L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of 415V, 16A 4 pole TPN contactor with 230V/415V coil (Make-BCH,L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of 415V, 32A 4 pole TPN contactor with 230V/415V coil (Make-BCH,L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of 415V, 40A 4 pole TPN contactor with 230V/415V coil (Make-BCH,L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of 415V, 63A 4 pole TPN contactor with 230V/415V coil (Make-BCH,L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of RCBO, DP, 32A, 30mA Sensitivity (Make-L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of RCBO, DP, 40A, 30mA Sensitivity (Make-L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT)

Supply and fixing of 14/15 watt LED bulb(Pin Type) ) (make wipro ,bajaj ,philips or equivelent.)

Supply and fixing of 9/10 watt LED bulb (Pin Type ) (make wipro ,bajaj ,philips or equivelent.)

Supply and fixing of 10 watt LED tube light batten (make wipro ,bajaj ,philips or equivelent.)

Supply and fixing of 20 watt LED tube light batten (make wipro ,bajaj ,philips or equivelent.)

Supply and fixing of 40/36W, 4’ long Flurosent Tube (make wipro ,bajaj ,philips or equivelent.)

Supply and fixing of R06 type (AA), 1.5V Battery

Supply and fixing of R03 type(AAA), 1.5V Battery

Supply and fixing Single Phase two wire Energy Meter, (10-60) A

Supply and fixing of 12 watt LED indoor light fitting (make wipro, BAJAJ / PHILIPS / HAVELLS / CROMPTON/ OR EQUIVALENT ).

Supply and fixing of 2 pole 25 Amp.,230 volts onload changeover switch.

Supply and fixing of 4 pole 40 Amp.,415 volts onload changeover switch.

Supply and fixing of 4 pole 63 Amp.,415 volts onload changeover switch.

Supply and fixing of PVC board of 4"x4" sizes with backelite sheet on top.

Supply and fixing of PVC board of 7"x4" sizes with backelite sheet on top.

Supply and fixing of PVC board of 8"x6" sizes with backelite sheet on top.

Supply and fixing of 2.5 mfd Capacitor/condenser : (HPL, Havells, Anchor Bajaj or equivelent.)

Supply and fixing of off load Changeover switch (side handle) in sheet enclosure 415 V AC of 160 amps rating (Make - Havells, HPL, L&T or equivalent).

Supply and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4 core 10 sq.mm on wall surface as required. (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 1/2 core 25 sq.mm on wall surface as required. (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supplyand Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 1/2 core 70 sq.mm on wall surface as required. (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 1/2 core 120 sq.mm on wall surface as required. (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 1/2 core 35 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 1/2 core 95 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 1/2 core 185 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply of material and laying in ground including sand brick etc. complete HT XLPE 11 KV grade armoured aluminium cable of 3 core 70 sqmm including glanding crimping connections etc per meter of length (Make - UNIVERSAL CABLES/ NICCO/ HAVELLS/ SKYTONE/ KEI INDUSTRIES/ POLYCAB /OR EQUIVALENT).

Supply and fixiSupply and fixing of 24/25 W LED street light fitting complete with LED lamps, driver unit in existing GI bracket and clamping arrangement. (make wipro ,philps , HPL ,or equivelent.)

Supply and fixing of 100 W LED LED flood light as required : (make havells,bajaj ,wipro , HPL ,or equivelent.)

Supply and fixing of bolted fuse link (16 Amp. To 32 Amp)

Supply and fixing of fuse holders 20 Amp.

Supply and fixing of fuse holders 32 Amp.

Electrician for maintenance - comprising of Electrical fault rectification, Generator operation, substation manning, lift operation etc. ( detail scope provided in NIT) by deployment of two electrician(one for office and one for colony) with valid electrical licence per shift for three shifts per day .

Labour charge for deployment of helper as and when required

Reparing 1200 mm ceiling fan installed in CMPDI Campus - Rewinding work

Reparing 1200 mm ceiling fan installed in CMPDI Campus - lathe work for shaft repair

Reparing 1200 mm ceiling fan installed in CMPDI Campus- bearing both

Reparing 1200 mm ceiling fan installed in CMPDI Campus - Capacitor 2.5mFD

Repair of exhaust fan (rewinding, bearing )

Repair of wall mounted fan (rewinding, bearing )

Repair of pedestal fan (rewinding, bearing )

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Rewinding work

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - lathe work for shaft repair

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Motor Bush

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Pump impeller

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Pump Diffuser

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Pump shaft

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Pump coupling

Reparing and servicing of 3 phase 5 HP submersible pumpset installed in CMPDI Campus - Installation

Reparing and servicing of 7.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Complete rewinding

Reparing and servicing of 7.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Bearing

Reparing and servicing of 7.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Gland sleeve

Reparing and servicing of 7.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Transporting and fitting

Reparing and servicing of 7.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Terminal with cover

Reparing and servicing of 15 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Complete rewinding

Reparing and servicing of 15 HP monoblock pumpset kirloskar make installed in CMPDI Camp -lathe work

Reparing and servicing of 15 HP monoblock pumpset kirloskar make installed in CMPDI Campus - bearing both

Reparing and servicing of 15 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Transporting and fitting

Reparing and servicing of 12.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Complete rewinding

Reparing and servicing of 12.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus -lathe work

Reparing and servicing of 12.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - bearing both

Reparing and servicing of 12.5 HP monoblock pumpset kirloskar make installed in CMPDI Campus - Transporting and fitting

Supplying and fixing of automatic changeover current limiter (ACCL) of rating 30A/1.5-5, 240V SPN with connections, etc. as requiired ( Make- L&T / ABB / HAVELLS / SCHNEIDER / CONTROL & SWITCHGEAR COMPANY / STANDARD OR EQUIVALENT) .

Servicing and Maintenance of DG set 2 x 125 KVA - VALVOLINE POWEROL SUPER PREMIUM ENGINE OIL 6.75 LTR

Servicing and Maintenance of DG set 2 x 125 KVA- OIL FILTER S/F GESNSET # 18

Servicing and Maintenance of DG set 2 x 125 KVA- FUEL FILTER PAPER ELEMENT # 18

Servicing and Maintenance of DG set 2 x 125 KVA -FILTER CARTRIDGE & WATER SEPERATOR BOWL # 18

Servicing and Maintenance of DG set 2 x 125 KVA -POWEROL SUPER PREMIUM COOLANT RTU 1LT

Servicing and Maintenance of DG set 2 x 125 KVA -DISTILLED WATER # 18

Servicing and Maintenance of DG set 2 x 125 KVA -SERVICE CHARGES FOR DG MAINTENANCE

Servicing and Maintenance of DG set 2 x 125 KVA -TRANSPORTATION CHARGES

Servicing and Maintenance of DG set 2 x 160 KVA - Air Filter

Servicing and Maintenance of DG set 2 x 160 KVA - Fuel filter pre element

Servicing and Maintenance of DG set 2 x 160 KVA - Element fuel Micro Filter

Servicing and Maintenance of DG set 2 x 160 KVA - Lub Oil Filter element

Servicing and Maintenance of DG set 2 x 160 KVA - Pre-mix 10 ltr Pack

Servicing and Maintenance of DG set 2 x 160 KVA - Lub oil 20Ltr Pack

Servicing and Maintenance of DG set 2 x 160 KVA - Coggled belt

Servicing and Maintenance of DG set 2 x 160 KVA - PDC rocker cover gasket

Servicing and Maintenance of DG set 2 x 160 KVA - packing & forwarding charges

Servicing and Maintenance of DG set 2 x 160 KVA - Servicing of DG set-I & II such as replacement of spares, tuning and adjustment & testing

AMF Panel repair and maintenance - Supply of MCX 34 or equivalent contractor

AMF Panel repair and maintenance - fitting & Installation charges

BCH or equivalent make star-delta starter for 7.5 HP/5 HP motors

Replacement of 2x18 watt CFL recessed light fitting with 15/17 watt LED indoor light fittings in Office building CMPDI RI-VII Bhubaneswar

Repairing of 2x315 kVA Transformer - Testing of transformer oil BDV (breakdown voltage) from state government

Repairing of 2x315 kVA Transformer - Filtration of transformer oil of 315 KVA (300 lts) transformer including transportation of filtration M/C and obtaining test certificate from testing agency after filtration in case BDV is not with in limits

Repairing of 2x315 kVA Transformer - Topping-up of transformer with new transformer oil (Chargable as per actual )

Repairing of 2x315 kVA Transformer - Sillicagel for breather

Repairing of 2x315 kVA Transformer - LT bushing and stud

Repairing/servicing of 2 Te. Split AC - AC service charge

Repairing/servicing of 2 Te. Split AC - Single pole contactor for outdoor unit

Repairing/servicing of 2 Te. Split AC - Gas Charge

Repairing/servicing of 2 Te. Split AC - Capacitor for Outdoor unit

Repairing/servicing of 2 Te. Split AC - Fan Motor

Repairing of fire fighting pump panel

Total impact of GST for the purpose of CTC

Santosh Kumar Sahoo