Construction of Portable Ramp, Toilet and Signages at GWPC District Ajmer

Civil Work

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20cm. In depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level in mix 1:4:8 (1 cement :4 Coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of Plastizers (if required) excluding the cost of centering, shuttering and reinfoecement. M20 grade nominal mix / Design Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix.mix)

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor Five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roof, griders having slopes up to 15 landlng, balconies, shelves, chajjas, lintels, bands M-20 grade Nominal Mix / Design.Providing M-25 grade concrete by using cement as per codal provision instead of M-20 grade design mix.

Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level.

Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor Five level for: Suspended floors, roofs landings stircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc.

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five leve. ("Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermmo-mechanically Treated bars (Conforming of relevent IS Code)

Random Rubble stone masonry with hard stone in foundation and plinth in Cement Sand Mortar above 30 CM thick wall in .Cement Mortar 1:6 (1 Cement : 6 Sand)