Electro Mechanical works to be carried out for proposed construction of 70000 gallons capacity overhead tank and 25000 gallons capacity Sump cum Pump House at WSS Tulsibagh, Srinagar

Amount

Supply, Installation, Testing & Commissioning of Non-clog Pumping Unit as per IS 5600 PUMP: - Rated Discharge =15000 GPH Rated Head = 36 meters Type of pump : Non–clog Submersible Vertical Pump • Solid Handling Capacity: 30mm (Minimum) MATERIAL OF CONSTRUCTION: • Pump Casing : Cast Iron • Impeller : Stainless Steel • Pump Shaft : Stainless Steel • Motor Body : Cast Iron • Sealing : Dual mech. seal ü The bowl plate shall be provided with name plate depicting all specifications MOTOR: - • Rating : as per OEM • Speed 1440-1500 RPM • Method of starting: Star – Delta. • Frequency : 50Hz + 3% • Voltage: 415 ± 15% V • Class of insulation: Suitable for above rating. Manufactures Test Certificate to be appended Rest of Specification/Details are as per S. No. 1 of Technical Annexure A

Providing/supplying and fitting of G.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class-C confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). Size: DN125 Class: C (Heavy) Rest of Specification/Details are as per S. No. 2 of Technical Annexure A

Fabrication, providing and fitting of washout Tee. The Tee shall be fabricated out of G.I pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends. Size: DN 125 Class: C (Heavy) Rest of Specification/Details are as per S. No. 3 of Technical Annexure A

Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units. Size: DN125 PN:1.6/16 Rest of Specification/Details are as per S. No. 4 of Technical Annexure A

Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. Size: 125 mm PN: 1.6/16 Rest of Specification/Details are as per S. No. 5 of Technical Annexure A

Providing, fitting, testing and commissioning of ARV (Air Release valve) as per IS 14845 to be fitted to G.I rising Main. Size: 50mm PN: 1.6/16Rest of Specification/Details are as per S. No. 6 of Technical Annexure A

Fabrication, Providing and fitting of 90–120-degree bend/elbow to be fabricated out of G.I pipe, 1 m length and flanged on both ends a to make it leak proof. The flanges shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc. as per site requirement. Size: DN 125mm Rest of Specification/Details are as per S. No. 7 of Technical Annexure A

Fabrication, providing and fitting of split type MS clamps10 mm thick, 2 ft long and 3 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts. Size: 125 mm Rest of Specification/Details are as per S. No. 8 of Technical Annexure A

Providing, Fabrication and fitting of Structural Steel, including cutting, hoisting, fixing in position and applying a priming coat of steel primer and 02 coats of paint of approved shade all complete welded. The drawings and Dimensions will be provided by Site in Charge at the time of execution of job Rest of Specification/Details are as per S. No. 9 of Technical Annexure A

Supply, Installation and testing of manual type triple gear chain pulley block along with monorail geared travelling trolley y of proper specifications Capacity = 2 ton Rest of Specification/Details are as per S. No. 10 of Technical Annexure A

S/I/T/C of 11/0.433 KVA, 3 Phase Distribution Transformer with Bimetallic Terminal connectors Energy level -2 Aluminum wound Specifications conforming to IS: 1180 (Part 1) 2014 with latest amendments Type of cooling: ONAN. Rating: 63 KVA HT Transformer, 3 phase (Level 2). Manufacturers certificate be appended and Rest of Specification/Details are as per S. No. 11 of Technical Annexure A

Transformer Bed: The HT Transformer has to be erected on a transformer bed of size 2000x2000mm fabricated by welding out of 04 No’s of vertically grouted Mild Steel pipes of 100 MM diameter, including providing and fitting of Channel section ISMC- 100, 2000MM, resting of HT transformer. Rest of Specification/Details are as per S. No. 12 of Technical Annexure A

Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps Rest of Specification/Details are as per S. No. 13 of Technical Annexure A

Supply, Installation, Testing and commissioning of Polymeric Gang operated Air brake switch, outdoor type, triple pole, suitable for vertical installation, complete as per IS specs Rest of Specification/Details are as per S. No. 14 of Technical Annexure A

Supply, Installation, Testing and commissioning of 11KV polymer fuses Set Horn Gap Rest of Specification/Details are as per S. No. 15 of Technical Annexure A

Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class Rest of Specification/Details are as per S. No. 16 of Technical Annexure A

Supply and fitting of 11 KV polymeric composite pin insulator as per S. No. 17 of Technical Annexure A

Supply, installation, errection of 9 mtrs long H.T pole of specifications ST- 410 (sp-33) as per S. No. 18 of Technical Annexure A

P/F of Galvanized nuts, bolts of various sizes as per site requirement.as per S. No. 19 of Technical Annexure A

P/F Danger Plate with clamps as per S. No. 20 of Technical Annexure A

Providing and fixing G.I Barbed wire for anti-climbing/ anti climbing devices with clamps as per S. No. 21 of Technical Annexure A

Providing and fitting of Galvanized stay set complete as per S. No. 22 of Technical Annexure A

Providing and fitting of ACSR as per S. No. 23 of Technical Annexure A

Supply, Installation and Testing of 50 Sq mm XLPE Aluminum H.T cable (ABC type) of 11 KV grade with following specs. Size (cross sectional area in sq mm) = 3×50 with reinforced wire with messenger wire Phases: Red, Yellow, Blue Rest of Specification/Details are as per S. No. 24 of Technical Annexure A

P/F of 11 KV cable termination kit as per S. No. 25 of Technical Annexure A

Providing and fitting of LT Distribution box for HT transformer Capacity of transformer: 63 KVA Rest of Details/Technical specification as per S. No. 26 of Technical Annexure A

Providing and fitting of PRODIGY LT Meter of following specification complete with all fixtures required for fitment at site Rest of Details/Technical specification as per S. No. 27 of Technical Annexure A

Fabrication Providing and fitting of modular control panel of appropriate size fabricated out of 14SWG sheet having required openings/vents and protection class: IP-55 and fitted with accessories MU-G40 and Rest of Details/Technical specification as per S. No. 28 of Technical Annexure A

Providing, fitting, testing and commissioning of Manually operated copper wound, 3-phase, AC power supply multi step voltage stabilizer. Rating: 50 KVA Manufacturers test certificate to be appended and Rest of Details/Technical specification as per S. No. 29 of Technical Annexure A

Providing and Fitting of 3 /3.5/2-Core, XLPE Armored Aluminum Cable conforming to IS: 7089-part 1st as service line from the HT transformer to control Rest of Details/Technical specification as per S. No. 30 of Technical Annexure A

70 sqmm, 3.5core, LT cable

10 sqmm, 2 core, LT cable

Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 as per S. No. 31 of Technical Annexure A

Size: 10 sq.mm

Providing and fitting of 50 mm square single core copper cable for interconnecting various electrical gadgets as per IS 694: 2010 along with thimbling as per requirement.as per S. No. 32 of Technical Annexure A

Providing and Fitting of cable tray of 150mm size for carrying the cable inside the machinery room. Job incudes P/F of geyser bolts, nuts washers etc. as per S. No. 33 of Technical Annexure A

P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. Rest of Specifications/details are as per S. No. 34 of Technical Annexure A

Supply, installation of 6 kg co2 type fire extinguisher manufactured as per IS:15683 OF 2006 with IS mark and comply with DGMS(Approval). Rest of details as per S. No. 35 of Technical Annexure A

Illumination of Premises: Providing and erection of 9 Mtrs long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items. 1) 01 No MCB 16 Amp. 2POLE Rest of Details/Technical specification as per S. No. 36 of Technical Annexure A

Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs: Input: 90-240 V 50 Hz Power Factor: >0.9 Rest of Details/Technical specification are as per S. No. 37 of Technical Annexure A

Providing and installation of Junction Box with DP 32Amp MCB to serve as amin switch for LED lighting. Rest of Details/Technical specification are as per S. No. 38 of Technical Annexure A

Providing, Installation and testing of 5KVA fully automatic voltage stabilizer Rest of Details/Technical specification are as per S. No. 39 of Technical Annexure A

Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter with 12V, 180AH Tubular inverter Battery Rest of Details/Technical specification are as per S. No. 40 of Technical Annexure A

Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen. Rest of Details/Technical specification are as per S. No. 41 of Technical Annexure A

TOOL KIT For Maintenance: - The Tool Kit for maintenance as per detailed specification as per S. No. 42 of Technical Annexure A

Providing of good quality convenience and utility items as per S. No. 43 of Technical Annexure A

Fabrication of 7’ (L) x 6’(B) x 1.5' (H) angle iron bed for operators with back-height of 2 feet. The detailed drawing will be provided by site in charge. (02Nos) Rest of Details/Technical specification are as per S. No. 44 of Technical Annexure A

Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet, 6 nos. Rest of Details/Technical specification are as per S. No. 45 of Technical Annexure A

Providing of CP 12 5WP solar/ electrical lantern chargeable on both solar & electrical 220v supply. Rest of Details/Technical specification are as per S. No. 46 of Technical Annexure A

Providing of Foldable, Portable & Compact Aluminum Telescopic Ladder, EN131 Certified. Rest of Details/Technical specification are as per S. No. 47 of Technical Annexure A

Providing of Industrial Rubber 11 KV Electrical Hand Shock Proof Safety Gloves for handling electrical equipment’s/connections.

Providing and fitting of 02 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipment’s installed at site and the name of Water supply scheme size= 7x5 feet & 2x5 feet Rest of Details/Technical specification are as per S. No. 49 of Technical Annexure A

Providing and fitting of 200Ampere 4Pole Side operated OFF Load Changeover Switch in Separate SS Enclosure as per S. No. 50 of Technical Annexure A

Supply, Erection and commissioning of Automatic Power Factor Correction Panel of 15 kVAr as per as per S. No. 51 of Technical Annexure A

Electrification of Pump house including heating and lighting points as per S. No. 52 of Technical Annexure A