22/SE(Cons.)/EandAM/KMDA of 2025-26 (2nd Call)

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.

Earthwork in excavation in foundation trenches or drains, in all sorts of soil ( including mixed soil but excluding laterite or sandstone) including removing spreading or stacking the spoils within a lead of 75 m as directed including trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. a) Depth of excavation not exceeding 1500mm .

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C).

125mm thick brick work with 1st. class bricks in cement mortar (4:1). a) In ground floor

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety In Ground Floor

Reinforcements for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. (II)JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL (Tor Steel/ HYSD) a) In foundation & Ground Floor.

Neat cement punning about 1.5mm thick in wall, dado, window, sills, floor, drain etc.

Supplying, fitting & fixing MS clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1)a fitted and fixed omplete as per direction. 40mm x 6mm x 125 mm length. (Cost of cement concrete will be paid separately)

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (b) 32 mm thick shutters (single leaf). (i) Ground Floor

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white. [Note : for estimate purpose construction wing may consider weight of Aluminium door @ 9.0 Kg per Sq.M]

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987..vi) 6mm thick coloured / tinted / smoke glass. In Ground Floor

(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.

(C) Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White)

(a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

(ii) Door stopper (Anodised aluminium)

Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge.

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground Floor. (viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. In Ground Floor

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white. [Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. a)75mm x 47mm x 1.70mm

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long.

Anodised aliminium D-type handle of approved quality manufactured fromextruded section conforming to I.S. specification (I.S. 230/72) fitted and fixedcomplete: (b) With round base: (iv) 150 mm grip x 10 mm dia rod.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing 10 kg/sq m to16 kg/m2. In Ground Floor

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both+B151 faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor.

؀瑩浥㤷’Ĉ刀湥敤楲杮琠敨匠牵慦散漠⁦慷汬⁳湡⁤散汩湩⁧楷桴圠楨整䌠浥湥⁴慢敳圠呁剅倠佒䙏眠污異瑴⁹景愠灰潲敶⁤慭敫☠戠慲摮⠮⸱‵浭琠楨正⸩†湉䜠潲湵⁤汆潯色Ԁ؀瑩浥〸椀整㡭ر瑩浥㈸椀整㡭س瑩浥㐸椀整㡭ꬵࠁ灁汰楹杮䔠瑸牥潩⁲牧摡⁥捁祲楬⁣牰浩牥漠⁦灡牰癯摥焠慵楬祴愠摮戠慲摮漠汰獡整敲⁤牯挠湥牣瑥⁥畳晲捡⁥汯⁤牯渠睥猠牵慦散琠敲散癩⁥敤潣慲楴敶琠硥畴敲⁤洨瑡⁴楦楮桳 牯猠潭瑯⁨楦楮桳愠牣汹捩攠瑸牥潩⁲浥汵楳湯瀠楡瑮椠据畬楤杮猠牣灡湩⁧湡⁤牰灥牡湩⁧桴⁥畳晲捡⁥桴潲杵汨ⱹ挠浯汰瑥⁥獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩湡⁤獡瀠牥搠物捥楴湯漠⁦桴⁥䥅⹃䤠片畯摮䘠潬牯›††††††††††††††††††††⠊⥢吠潷䌠慯獴†††尠ԁ瀀؁؀瑩浥㘸椀整㡭蜷ࠁ牐瑯捥楴敶愠摮䐠捥牯瑡癩⁥捁祲楬⁣硥整楲牯攠畭獬潩慰湩⁴景愠灰潲敶⁤畱污瑩ⱹ愠⁳数⁲慭畮慦瑣牵牥猧猠数楣楦慣楴湯愠摮愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⁥潴戠⁥灡汰敩⁤癯牥愠牣汹捩瀠楲敭⁲獡爠煥極敲⹤吠敨爠瑡⁥湩汣摵獥挠獯⁴景洠瑡

灵牥朠潬獳⠠楨札潬獳⴩楗桴愠祮猠慨敤攠捸灥⁴桷瑩⹥† ⥢传瑓敥畳晲捡⁥吊潷䌠慯獴밠ࠂ畓灰祬湩Ⱨ映瑩楴杮☠映硩湩⁧猱⁴畱污瑩⁹敃慲業⁣楴敬⁳湩眠污獬愠摮映潬牯⁳潴洠瑡档眠瑩⁨桴⁥硥獩楴杮眠牯…‴潮⹳漠⁦敫⁹瑳湯獥⠠〱浭 楦數⁤楷桴愠慲摬瑩⁥瑡琠敨戠捡景攠捡⁨楴敬☠映湩獩楨杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴業數⁤楷桴挠汯畯楲杮漠楸敤椠⁦敲畱物摥琠慭捴⁨桴⁥潣潬牵漠⁦楴敬⁳湩汣摵湩⁧潲杵敨楮杮漠⁦潣据敲整猠牵慦散‬晩渠捥獥慳祲漠⁲祢猠湹桴瑥捩愠桤獥癩⁥…牧畯⁴慭整楲污⁳瑥⹣ਊ楗桴匠湡⁤敃敭瑮䴠牯慴⁲ㄨ㐺 〲洠桴捩…′浭琠楨正挠浥湥⁴汳牵祲愠⁴慢正猠摩⁥景琠汩獥甠楳杮挠浥湥⁴⁀⸲ㄹ䬠⽧煓洮☠樠楯瑮映汩楬杮甠楳杮眠楨整挠浥湥⁴汳牵祲䀠〠㈮欰⽧煓洮ਮ䄨 汆潯ੲ愨⠩⥢䄠敲⁡景攠捡⁨楴敬愠潢敶〠〮‹煓洮†††††††††††††ਠ椨 潃潬牵摥搠捥牯瑡癩⁥†††††ਠ䤠片畯摮䘠潬牯ȺɃʈʣʬ|Ȉ⠀⥁䘠潬牯⠊⥡戨 牁慥漠⁦慥档琠汩⁥扡癯⁥⸰㤰匠⹱†††††††††††††⠊⥩䌠汯畯敲⁤敤潣慲楴敶†††ਠ䤠楆獲⁴汆潯rᰀऀ؀팀ࠂ畓灰祬湩Ⱨ映瑩楴杮☠映硩湩⁧猱⁴畱污瑩⁹敃慲業⁣楴敬⁳湩眠污獬愠摮映潬牯⁳潴洠瑡档眠瑩⁨桴⁥硥獩楴杮眠牯…‴潮⹳漠⁦敫⁹瑳湯獥⠠〱浭 楦數⁤楷桴愠慲摬瑩⁥瑡琠敨戠捡景攠捡⁨楴敬☠映湩獩楨杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴業數⁤楷桴挠汯畯楲杮漠楸敤椠⁦敲畱物摥琠慭捴⁨桴⁥潣潬牵漠⁦楴敬⁳湩汣摵湩⁧潲杵敨楮杮漠⁦潣据敲整猠牵慦散‬晩渠捥獥慳祲漠⁲祢猠湹桴瑥捩愠桤獥癩⁥…牧畯⁴慭整楲污⁳瑥⹣圊瑩⁨慓摮䌠浥湥⁴潍瑲牡⠠㨱⤳ㄠ‵浭琠楨正☠㈠洠桴捩散敭瑮猠畬牲⁹瑡戠捡楳敤漠⁦楴敬⁳獵湩⁧散敭瑮䀠㈠㤮‱杋匯⹱…潪湩⁴楦汬湩⁧獵湩⁧桷瑩⁥散敭瑮猠畬牲⁹⁀⸰〲杫匯⹱⹭⠊⥂圠污੬愨 戨 牁慥漠⁦慥档琠汩⁥扡癯⁥⸰㤰匠⹱†††††††††††††††††ਠ椨⥩传桴牥琠慨潃潬牵摥搠捥牯瑡癩⁥湩汣摵湩⁧桷瑩੥湉䜠潲湵⁤汆潯㡲Ԃ㤀ᰂ䄀؂쐀Ԃꈀࠀ䈨 慗汬⠊⥡⠠⥢䄠敲⁡景攠捡⁨楴敬愠潢敶〠〮‹煓洮††††††††††††††††††⠊楩 瑏敨⁲桴湡䌠汯畯敲⁤敤潣慲楴敶椠据畬楤杮眠楨整††††ਠ湉䘠物瑳䘠潬牯ӧĈ匀灵汰楹杮愠摮氠祡湩⁧牴敵琠楬敮愠摮氠癥汥瘠瑩楲楦摥琠汩獥漠⁦灡牰癯摥戠慲摮⠠楳敺渠瑯氠獥⁳桴湡㘠〰洠⁘〶‰浭堠ㄠ‰浭琠楨正 湩映潬牯‬歳物楴杮攠捴‮敳⁴湩㈠‰浭猠湡⁤散敭瑮洠牯慴⁲ㄨ㐺 湡⁤′浭琠楨正挠浥湥⁴汳牵祲戠捡楳敤漠⁦楴敬⁳獵湩⁧散敭瑮䀠㈠㤮䬱⹧猯䵱漠⁲獵湩⁧潰祬敭楲敳⁤摡敨楳敶⠠‶浭琠楨正氠祡牥愠灰楬摥搠物捥汴⁹癯牥映湩獩敨⁤牡楴楦楣污猠潴敮映潬牯䴯獯楡⁣瑥⁣楷桴畯⁴湡⁹慢正湩⁧潣牵敳 慬摩愠瑦牥愠灰楬慣楴湯猠畬牲⁹獵湩⁧⸱㔷䬠⁧景挠浥湥⁴数⁲煳⁍敢潬⁷潭瑲牡漠汮ⱹ樠楯瑮⁳牧畯整⁤楷桴愠浤硩畴敲漠⁦桷瑩⁥散敭瑮愠摮挠汯畯楲杮瀠杩敭瑮琠慭捴⁨楷桴挠汯畯⁲景琠汩獥⼠攠潰祸朠潲瑵洠瑡牥慩獬漠⁦灡牰癯摥洠歡⁥獡搠物捥整⁤湡⁤敲潭慶景眠硡挠慯楴杮漠⁦潴⁰畳晲捡⁥景琠汩獥眠瑩⁨慷浲眠瑡牥愠摮瀠汯獩楨杮琠敨琠汩獥甠楳杮猠景⁴湡⁤牤⁹汣瑯⁨灵潴洠物潲⁲楦楮桳挠浯汰瑥⁥湩汣摵湩⁧桴⁥潣瑳漠⁦慭整楲污ⱳ氠扡畯⁲湡⁤污瑯敨⁲湩楣敤瑮污挠慨杲獥挠浯汰瑥⁥牴敵琠桴⁥慭畮慦瑣牵牥猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮在楨整挠浥湥ⱴ猠湹桴瑥捩愠桤獥癩⁥湡⁤牧畯⁴慭整楲污琠敢猠灵汰敩⁤祢琠敨挠湯牴嵲⥥䤨 楗桴愠灰楬慣楴湯猠畬牲⁹ㅀ㜮‵杫 煓洮‬〲洠慳摮挠浥湥⁴潭瑲牡⠠㨱⤴☠㈠洠桴捩散敭瑮猠畬牲⁹瑡戠捡楳敤漠⁦楴敬ⱳ〠㈮欠⽧匠⹱桷瑩⁥散敭瑮映牯樠楯瑮映汩楬杮眠瑩⁨楰浧湥⹴⠊⥂䰠杩瑨䌠汯畯⁲†††††ਠ湉䜠潲湵⁤汆潯⁲ӗÓ匀灵汰楹杮‬楦瑴湩⁧湡⁤楦楸杮戠扩挠捯牯猠潴⁰潣正ਮ⡡⥩䌠牨浯畩汰瑡摥䈠扩䌠捯桳牯⁴楷桴眠污汦湡敧眠瑩⁨敡慲潴⁲䔨畱癩污湥⁴潴䌠摯⁥潎‮ㄵ‱…潍敤‭牔灯捩污⼠匠浵桴湩⁧灓捥慩景䔠卓佃漠⁲楳業慬⁲牢湡⥤ ㌀′䵍䐠䅉 㐀‰䵍䐠䅉o匀灵汰楹杮‬楦瑴湩⁧湡⁤楦楸杮琠睯汥爠楡楷桴琠潷戠慲正瑥⹳⠊⥡䌠倮‮癯牥戠慲獳⠊楩⥩㔲洠楤⹡愠摮㘠〰洠潬杮Ș匀灵汰楹杮‬楦瑴湩⁧湡⁤楦楸杮眠楨整瘠瑩敲畯⁳档湩⁡敢瑳焠慵楬祴愠灰潲敶⁤慭敫眠獡⁨慢楳楷桴䌠䤮‮牢捡敫獴漠㔷洠⁘㔷洠潷摯湥戠潬正ⱳ䌠倮‮慷瑳⁥楦瑴湩獧漠⁦㈳洠楤⹡‬湯⁥灡牰癯摥焠慵楬祴戠慲獳䌠倮‮楰汬牡挠捯景ㄠ‵浭搠慩Ⱞ䌠倮‮档楡楷桴爠扵敢⁲汰杵漠⁦〳洠楤⹡‬灡牰癯摥焠慵楬祴倠嘮䌮‮慷瑳⁥楰数眠瑩⁨⹃⹐渠瑵㌠′浭搠慩Ⱞ㤠〰洠潬杮愠灰潲敶⁤畱污瑩⁹⹐⹖⹃挠湯敮瑣潩楰数眠瑩⁨敨癡⁹牢獡⁳⹃⹐渠瑵椠据畬楤杮洠湥楤杮朠潯⁤污慤慭敧⁳湡⁤慰湩楴杮琠敨戠慲正瑥⁳楷桴琠潷挠慯獴漠⁦灡牰癯摥瀠楡瑮ਮ椨⥩㔠〵洠⁘〴‰浭猠穩睥畓灰祬漠⁦偕䍖瀠灩獥⠠⁂祔数 …楦瑴湩獧挠湯潦浲湩⁧潴䤠ⵓ㌱㤵ⴲ㤱㈹⠊⥁⠠⥩匠湩汧⁥潓正瑥摥㌠䴠瑥牥䰠湥瑧⁨ਠ愠 㔷洠㑭䄨 椨 楓杮敬匠捯敫整⁤″敍整⁲敌杮桴†ਠ戨 ㄱ‰浭‰匀灵汰⁹景唠噐⁃楰数⁳䈨吠灹⥥☠映瑩楴杮⁳潣普牯業杮琠卉ㄭ㔳㈹ㄭ㤹⸲†⠠⥂䘠瑩楴杮⁳††††††††† 椨 潃灵敬⁲†††††⠊⥡㜠‵浭=⠀⥂䘠瑩楴杮⁳††††††††† 椨 潃灵敬⁲††ਠ戨 ㄱ‰浭⠀楩 汐楡敔⁥†††⠊⥡㜠‵浭?⠀楩⥩䐠潯⁲敔⁥††††††††††††††††††ਠ戨 ㄱ‰浭6瘀⥩䐠潯⁲⁙䰨⥈☠⠠䡒 ††††††††††⠊⥢ㄠ〱洠ᵭ⥸䈠湥⁤㜸㔮₺††ਠ愨 㔷洠╭楸⥶䌠潲獳吠敥眠瑩⁨潄牯†ਠ愨 㔷洠≭癸 敖瑮䌠睯††††††ਠㄱ‰浭%砀楉⥸䐠潯⁲慇歳瑥††††ਠ ⥢ㄱ‰浭0砀癸⥩删摥捵牥ਠㄱ‰⁘㔷洠††††††††††㘊硸楶⥩删摥捵湩⁧敔⁥⠊ㄱ‰⁘㔷洠⥭†††††††††ਠ⠀⥁䄠潢敶朠潲湵⁤⠊⥢ㄠ〱洠≭摁⁤⁀㠱┠䜠呓漠汓‮潎‮‱潴ㄠ㜱"䄀摤䀠ㄠ┠䌠卅⁓湯匠⹬丠⹯ㄠ琠ㄱ⸸ࠁ
慅瑲⁨眠牯湩映汩楬杮椠潦湵慤楴湯琠敲据敨⁳牯瀠楬瑮⁨楷桴朠潯⁤慥瑲⁨湩氠祡牥⁳潮⁴硥散摥湩⁧㔱‰浭‮湩汣摵湩⁧慷整楲杮愠摮爠浡業杮攠捴‮慬敹⁲祢氠祡牥挠浯汰瑥⹥ 慐浹湥⁴潴戠⁥慭敤漠桴⁥慢楳⁳景洠慥畳敲敭瑮漠⁦楦楮桳摥焠慵瑮瑩⁹景眠牯⸩††愊 楗桴攠牡桴漠瑢楡敮⁤牦浯攠捸癡瑡潩景映畯摮瑡潩⹮ùZĈ䈀楲正眠牯楷桴ㄠ瑳挠慬獳戠楲正⁳湩挠浥湥⁴潭瑲牡⠠㨴⤱†††愊 湉映畯摮瑡潩湡⁤汰湩桴㸮Ԁ樀ࠀ
牂捩潷歲眠瑩⁨猱⁴汣獡⁳牢捩獫椠散敭瑮洠牯慴⁲㘨ㄺ † ⥢䤠畳数⁲瑳畲瑣牵⁥†††ਠ䤠片畯摮䘠潬牯ZƏĈ匀灵汰楹杮‬楦瑴湩⁧湡⁤楦楸杮唠噐⁃潤湷瀠灩獥䄠琠灹⁥湡⁤楦瑴湩獧挠湯潦浲湩⁧潴䤠⁓㌱㤵ⴲ㤱㈹†楷桴渠捥獥慳祲挠慬灭⁳慮汩⁳湩汣摵湩⁧慭楫杮栠汯獥椠慷汬ⱳ攠捴‮湡⁤畣瑴湩⁧牴湥档獥椠湡⁹潳汩‬桴潲杵⁨慭潳牮⁹潣据敲整猠牴捵畴敲攠捴‮晩渠捥獥慳祲愠摮洠湥楤杮朠潯⁤慤慭敧⁳湩汣摵湩⁧潪湩楴杮眠瑩⁨潪湩楴杮洠瑡牥慩獬⠠匠異慹湲‬慶慬潭摩⼠戠瑩浵湥⼠䴠‮敳污攠捴⤮挠浯汰瑥⹥†椊 偕䍖倠灩⁥ㄱ‰浭搠慩Ÿ%椀⥩唠噐⁃敂摮㠠⸷‵敤牧敥ਠㄱ‰浭搠慩椀楩 偕䍖匠潨⁥ㄊ〱洠穭ࠀ
慎敭漠⁦潗歲›潃獮牴捵楴湯漠⁦牰灯獯摥唠扲湡䠠慥瑬⁨…敗汬敮獳䌠湥牴⁥唨䠭圦⥃愠⁴慗摲丠⹯㐠眠瑩楨汕扵牥慩䴠湵捩灩污瑩⹹‹䌀湯牴捡⁴潎›潎楴散䤠癮瑩湩⁧ⵥ敔摮牥丠㩯㈠⼲䕓䌨湯⹳⼩♅䵁䬯䑍⁁景㈠㈰ⴵ㘲†䐠瑡摥›†㤲⼠㄰㈯㈰⠶渲⁤慣汬Ⱙ吠湥敤⁲䑉›〲㘲䭟䑍彁㤹㌵〴ㅟ

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement

Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.

Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps.

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

D(i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

Suppling,fitting & fixing E.W.C in white glazed vitreous china ware of approved make supplied fittied complete in position with necessary bolts nuts.etc. a)with 'P' trap

Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws supplied, fitted and fixed complete. (a) E.W.C. (ii) Plastic (hallow type) white

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iv) 600 mm long

Supplying, fitting and fixing pedestal of approved make for wash basin (white)

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm

Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I, specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing soap holder. (b) Fibre glass

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) – Multilayer (g) 1000 litre capacity

Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L.

b) Extra for each additional story

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved makesupplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. (SAIL/TATA/RINL)

xvi) Pipe Clip (a) 75 mm

xviii) W.C. Connector (450 mm long) W / lipring (a) 75 mm

Supplying, fitting and fixing C.I. round grating. 150 mm dia

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supply & Fixing 250 V ,16A per way 2+12 way double door BDB sheet steel enclosure with tinned copper bars, din rail etc embedded in wall including mended good the damages to thebuilding work with the following ratings MCB with necessary earthing attachment as per direction of EIC. Incoming:- 63 A DP Islator-1 No. Outgoing :6- 32A SPN MCB -12 Nos

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 19 mm dia pvc pipe embeded in wall incl. necy. PVC clips, fittings etc.2 x 4 sqmm + 1 x 1.5 sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in in 19 mm dia pvc pipe embeded in wall inc incl. necy. fittings as required 2 x 6 sqmm + 1 x 4 sqmm as ECC

Distribution wiring in 1.1 KV grade 2x1.5 sqmm singlecore stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable 19 mm bore, 3 mm thick PVC pipe complete with all accessories embeded in wall (Precision make) with 1x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate on wall incl. mending good damages to original finish. Average run 6mtr

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. makingnecy. connections etc

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply & delivery at site 1X18 Watt LED Tube light fittings complete with LED tube lamp, suitable for 230V, 1Ø, 50 Hz supply, as per specification direction of the EIC. (Make : - Philips or equivalent).

Supply and delivery at site of single Phase, 50 Hz, 300 mm heavy duty exhaust fan including complete as per specification & direction of EIC.

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) Exhaust fan (12")

Fixing only 30 cm (12") exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Supply & delivery of 50 Watt LED Light fitting complete with all accessories as per direction of EIC.Make : - Philips, Type : -BRP062 LED 65 CW SLA S1 PSU

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc 63A 415V FP L&T

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length

Supplying and fixing 19 mm dia polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works

Supply, delivery, hoisting and commissioning of 2 mm glowsign board made of 22 SWG GI sheet box with 5'x12' aluminium channel for fixing the vinyl board after necessary cutting the letter as required & s/f LED tube light fitting along with all accessories.

Supplying and Drawing 1.1 KV single core 2X4 SQ MM stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Supply & Installation of single phase 230V,1 HP mono block type pump-motor set with starter and all other accessories.

Percent (%)

Percent (%)

Please Enable Macros to View BoQ information