Loading
Loading…
Loading…
Tender Value
₹13.3 L
EMD Value
₹26,550
Closing Date
7 Sept 2026, 6:00 pm
Office of the Executive Engineer, Tamluk Division,
Office of the Executive Engineer,Tamluk Division, P.H.Engg. Dte.P.H.E. Complex 1st floor, Parbatipur,Tamluk, Purba Medinipur 721636
Supplying and laying 600 mm dia M.S pipe conduit to be prepared by 10 mm thick M.S plate by pipe Jack pushing technique at Tamluk-Moyna state Highway of Channage of 2.850km from Tamluk Animel Hospital for Uttar Sonamui PWSS of Tamluk Sub Division u
2026_PHED_1037859_1
WBPHED/EE/TD/NIeT_10/2025-2026 (2nd Call)
Open Tender
CIVIL WORKS
Percentage
25 days
Tamluk Block
Please refer Tender documents.
2 documents required · 2 mandatory
₹26,550
Office of the Executive Engineer,Tamluk Division,
13 Aug 2026
13 Aug 2026
10 Sept 2026
13 Aug 2026
7 Sept 2026
17 Aug 2026
17 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Hire charges of machinery & equipments, viz, Hydraulic jack, DG Set, crane/hydra, pump for dewatering, JCB etc. as per requirment at site including cost of fuel tools & tackles. | 1 | Per day | 80,000 | ₹80,000 |
| 2 | Hiring & driving MS Steel piles | 160 | Sqm | 1,333 | ₹2,13,280 |
| 3 | Loading M.S Plate into trucks at the lifting point, carriage of the same for a distance of 85 km & unloading worksite | 1 | MT | 470.5 | ₹470.03 |
| 4 | Supply of MS plate (16 mm thick) from primary producer | 1 | MT | 65,000 | ₹64,935 |
| 5 | Fabricating MS pipe in shop | 1 | MT | 15,738 | ₹15,722.26 |
| 6 | Field welding of ms plate | 66 | Mtr. | 1,352 | ₹89,232 |
| 7 | Pipe jacking from the driving pit including cost of labour, dewatering etc. | 14 | Mtr. | 20,000 | ₹2,80,000 |
| 8 | Derusting, brushing, cleaning & smoothenning thorughly the inner surface of spirally welded mild steel pipes & specials by sand blasting to SA-1, Swesdish specification & immediately after sand blasting applying protection coatings (resistant to corrosion & contamination of drinking water) of drinkon alluminium primer 2 coats. dft (40-50) microns each coat of shalimer paints Ltd. or equivalent by spray painting in the surface of the pipes as per manufacturers specification, all complete with supply of requisite materials, labour consumable etc. including etc. stacking the coated pipes properly as per specification, direction & satisfection of the E.I.C. | 27 | Sqm | 904.65 | ₹24,425.55 |
| 9 | Derusting, brushing, cleaning & smoothenning thorughly the outer surface of spirally welded mild steel pipes & specials by sand blusing to SA-21/2, Swesdish specification & immediately after sand blasting applying one coat of fast drying synthetic primer B & thereafter applying coating & warpping to the pipes (already coated with primer) as per IS 10221 by thermofusion process by 4 mm thick tar based polymeric corrosion protection tape as per IS 10221 specification consisting of 3 layers of polymeric mix one layer of fibre glass mat & 3 layers of HMHDPE Flim all calendered together to form the 4 mm thick tape minimum overlaps to be maintained for piped 12.5 mm & for welding joints 50 mm on both side of the weld immediate after the wrapping coating is complete a final coat of white wash with water based cement paint is to be done over the entire coated pipe as per specification direction & specification of E.I.C including cost of all labour & material complete | 27 | Sqm | 1,964.97 | ₹53,054.19 |
| 10 | Inside food grade epoxy coating 300 micron thick | 27 | Sqm | 978.29 | ₹26,413.83 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
WBF2911.pdf
Tender Documents • 2.20 MB
BOQ_2549570.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].