ROOFING AND FALSE CEILING_SZ

DISMANTLING,FALSE CEILING

REMOVAL OF ROOFING — MOVAL AND STACKING OF THE EXISTING CANOPYROOFING MATERIAL AND ROOFING SYSTEM AND STACKINGTHE REMOVED ROOFING MATERIAL MATERIAL A UNOBJECTIONABLE PLACE AT THE RETAIL OUTLET ASDIRECTED BY THE EIC AND THE CONSULTANT. THEMATERIAL REMOVED FROM THE EXISTING CANO TO BESTACK PROPERLY WITH INDEXING THE MATERIAL GOODFOR INSPECTION.

DISMAN OF EXISTING GUTTER 7750-GMO SOUTH ZONE — SMANTLING AND REMOVING OF EXISTING GUTTERS.CARE SHOULD BE TAKEN FOR NOT DAMAGING THEEXISTING SHEETS AND STRUCTURE. REMOVING AND HIFTING OF THE REMOVED MATERIAL AS PERINSTRUCTION OF ENGINEER-IN-CHARGE.

SUP & INST - FASCIAGI,THK:20 7750-GMO SOUTH ZONE — PPLYING AND FIXING 20 SWG GI SHEET FACIAINCLUDING PAINTING WITH ONE COAT OF ZINC CHROMATEPRIMER AND TWO COATS OF 1STQUALITY SYNT TICENAMEL PAINT ON FRONT SIDE . NECESSARY FACIAFRAMEWORK FOR FASTENING THE SHEET TO THE CANOPYSECURELY SHALL BE PAID SEPARATEL

SPLY AND FIXG OF GUTTER — OVIDING AND FIXING 20G ALUMINIUM GUTTERSUITABLY BENT WITH PROPER OVERLAPS, SEALANT,REVET, SCAFFOLDING, LABOUR, TRANSPORTATION, E ,COMPLETE.

SPLY AND INSTLN OF — OVIDING AND INSTALLING ROOFING RIBBED ROOFINGSYSTEM MANUFACTURED WITH HIGH STRENGTH STEELGRADE OF G550(550MPA) OF HPCL APPROVED REGALVALUME HIGH TENSILE COLD ROLLED STEEL AS PERASTM 117 A792M/AS 1397 COATING CLASS AZM 150(MINIMUM 150 GM/SQM ZINC-ALUMINUM LLOY COATINGMASS TOTAL OF BOTH SIDES), OF YIELD STRENGTH 550MPA THICKNESS OF BARE METAL (BCT): 0.40MM,TOTALCOATED THICKNESS(TC : 0.45 MM .APPROXIMATE MASSOF ROOFING SHEET SHALL BE 4.17 KG/SQM. PANELSSHALL BE OF MIN. 900 MM WIDE AND MIN. CORRUGATIONDEPT OF 38 MM WITH VARYING LENGTHS AS PER SITEREQUIREMENTS RATE SHALL BE INCLUDING LAYING OFSHEETS WITH APPROVED FASTENERS AND ALSO A WEATHER SEALANT TAPE AS PER MFRapos;SRECOMMENDATIONS AND ALSO PROVIDING RIBBEDGALVALUEME RIDGE PIECES OF THE SAME CLASS AS OF HE MATCHING CORRUGATION PROFILE OF THE ROOFINGSYSTEM AS RECOMMENDED BY THE MFR.AND,HORIZONTAL/VERTICAL FLASHING NEAR ILLUMINATED BANDING .

PROVIDING&FIXING,FALSE

PAINTING OF CANOPY COAT:2 7750-GMO SOUTH ZONE — INTING OF CANOPY, CLEANING OF THE CANOPY FASCIAAND FALSE CEILING SURFACE TO REMOVE ANY OBSERVEDRUST AND PROVIDING AND APPLYING 2 OATS OFSYNTHETIC ENAMEL PAINT 1ST QUALITY OF APPROVEDMANUFACTURER AND SHADES ON THE SURFACE TO GIVE ANEVEN SHADE AFTER TWO COA OF RED OXIDE PRIMER ASPER IS-712 LATEST REVISION. THE COLOUR SCHEMESHALL BE AS PER STANDARD HPCL COLOUR CODING.

INST SUPPLIED FIXT CAN OR — INSTALL SUPPLIED LED FIXTURE OF CANOPY OR YARDLIGHT AT RETAIL OUTLETS OR OTHER PREMISES ASDECIDED BY HPCL. WORK INCLUDES PICKIN UP OFFIXTURES, ACCESSORIES, CUT OUTS, CONTROLLERS ETC.FROM REGIONAL OFFICE, TRANSPORTING, STOCKING ATRETAIL OUTLETS. COST TO I LUDE INSTALLATION OFFIXTURE AS PER MANUFACTURER RECOMMENDATION, WITHCHAIN OR GI WIRE HOLDING STRAPS, ACCESSORIES,MATERIAL, LAB ETC.. VENDOR TO FOLLOWINSTRUCTIONS OF EIC FOR DECIDING THE LOCATION OFFIXTURE. CABLE, GLANDS WILL BE PAID EXTRA IFPROVIDED BY ENDOR.

SPLY&TRANSPT OF LIGHT — PPLY AND TRANSPORTATION (TO RESPECTIVE ROS/YARDAS MENTIONED IN THE TENDER DOC) OF 80 W CANOPYLED LIGHT FIXTURE WITH MIN 140 LUME PER WATTEFFICACY FOR LEDS AND MIN 120 LUMENS PER WATTEFFICACY FOR THE SYSTEM. KINDLY READ THE DETAILEDTECHNICAL SPECIFICATION AS PER THE ATTACHMENT.