SPL REPAIR TO ROOF TREATMENT BLDGS P1, P5, P9, P16, P21, P17, P13, P12 OF OTM ACCN, TOILET CUM BATHROOM OF BLDG N0 P-57 AND PROVN OF LADY OFFICER TOILET NEAR BLDG T 74, STEEL SINK, PLATE RACK IN KIT OF BLDG NO P14 TO P18 UNDER AGE B/R-I OF GE(N) MAMU

Amount

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in any type of soil complete all as specified and directed.

Returning filling in, including spreading , levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on brick masonary on other than fair faces of brick work, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the edge in true line, shape, finishing the surface smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered surface of wall and appying two coat of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of weatherproof exterior emulsion paint over one coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of old surface of walls including minor repair (to make good in cement mortar 1:6 or with POP) to obtain smooth surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old wall surface and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old ceiling surface and applying one coat of white wash complete all as specified and directed.

M&L for Complete removal of existing treatment from walls, brooming down with broom or steel wire brush; scrapping down smoke soot, moulds, mass, efflorescent salts, trading oil and greasy spots etc including minor repair to make good surface in CM 1:4 or with POP to obtain smooth surface and applying two coats of interior emulsion paint complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and refixing in same opening safely, (including minor repairs ) complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges (as per sample) complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 150 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

S&F Mild steel sliding door bolts 300mm long, stove enameled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed.

M&L for Prepainted steel windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick, galvanized as per IS 277 with Zinc of 120 GSM), coated with epoxy primer of 5-7 microns thick, painted with a polyester paint of 12-16 microns thick, back coated with 5-7 microns thick alkyd backer. Section for outer frame shall be of 48x50mm, centre mullion 48x25mm with rebate 20mm for provision of Guard bars/ Grills to glazed shutter. The sections shall be cut, metred, joined with corner brackets. Centre mullion shall be fixed with mullion cap. Stainless steel heavy duty pivot hinges, Handle, stay - 2nos shall be provided per shutter of the window duly fitted with 5mm thick plain float glass with rubber gaskets, panel beading of section12x12mm including fixing the frames in concrete/ masonry walls by means of self expanding screws. Outer frame and mullions shall have 10mm painted steel Square guard bars with max 6" pitch complete all as specified and directed. Make: M/s Exlir Met Form Pvt Ltd/ M/s NCL Build Tech Ltd./ M/s Ashwani & Sons or equivalant as approved.

S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F 25mm bore mild steel powder coated paint, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets, fenials etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.

S&F 3mm thick frosted/pin head glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.

Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed .

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles light shade 9-10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:4) complete all as specified and directed.

M&L for vitrified tiles light shade 9-10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm as in verticle surface /daddo/skirting and like, set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick screed bed or bedding layer of mortar in CM (1:4) complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.

All as per item No 38 but 20mm bore

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

All as above item No 40 but fixing only complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

All as above item No 42 but fixing only complete all as specified and directed.

S&F in repair 15mm bore dia dia Bib taps long nose, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy chromium plated fancy type (as per sample) ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.

S&F in repair 15mm bore dia pillar tap cast copper alloy chromium plated (as per sample) screwed down, high pressure screwed for iron pipe complete all specified and directed .

S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity, inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

M&L for 25 mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in sub floors for laying floor finish complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 1000 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , fillet, gola, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth mixed with with WPC as per manufacturer's instruction complete all as specified & directed. (WPC measured & paid separetaly)

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane. (d) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm or as prescribed by manufacture of membrane/ directed by Engr-in-charge.

S&F Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed

S&F Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed.

S&F Cast iron branch pipece single of 100mm bore or with parallel branches complete all as specified and directed.

S&F in repairs 100mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F Cast iron branch pipece single of 100mm bore or with parallel branches with oval access door complete all as specified and directed.

S&F Cast iron branch piece single of 75mm bore or with parallel branches with oval access door complete all as specified and directed.

S&F in repairs 100mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed.

S&F in repair cast iron cowl for 75 mm dia acomplete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, rubbish off the premises complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.

S&F Mild steel TMT bars bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.

M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes) and similar articles including necessary moulds/fromwork set in cement mortar (1:6) complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles,and removal of debris out off the premises etc complete all as specified and directed.

M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified & directed.

All as per Srl item No 76 but except bricks using old serviceable bricks.

S&F in repair vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding, connection to drain out pipe, flush pipe, flush pipe and anti syphonage pipe etc, making good to floor where required complete all as specified & directed.

M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.

S&F in repair towel rail, brass, CP 600 mm long 15mm dia pipe of 1mm thick (as per sample) complete all as specified and directed.

S&F in repair over head shower 125mm size (as per sample) for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs complete all as specified & directed. Make - Jaquar , Marc and Johnson

M&L for Machine pressed precast concrete pre-laminated glossy coloured interlocking paver block any shape and conforming IS 15658-2006 of 80mm thickness M-40 grade complete all as specified & directed.

M&L for 75 mm thick PCC type C2, 1:3:6 (40mm graded crushed stone aggregate) in Sub -base, floor and pavings etc complete all as specified & directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipe fixed in repair including waste coupling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm of approved make (as per sample) fixed with mild steel screws complete all as specified and directed.

S&F in repairs Vitreous china Urinals size 325x295x575 mm (as per sample) with inbuilt touch-free sensor (DC battery operated flushing) fixed to 15mm bore pipe ISI marked complete all as specified & directed.

S&F in repair glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.

M&L for 200 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Concrete bed to drain pipes 200 bore including packing under, and haunching against the sides & surrounding of pipes after they are laid and tested; in cement conctrete type C-2, 1:3:6, using 40 mm graded crushed stone aggregate complete all as specified & directed.

M&L for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors portion including demolition of PCC & removal of rubbish complete all as specified and directed.

M & L for RCC M-25 design mix as in slabs supported on walls, lintel band/ beams and columns in floros, roofs, landings balconies, canopies slabs and in shelves and the like complete all as specified & directed.

M & L for RCC M-25 design mix as in foundation and plinth beam, bases of columns and the like complete all as specified & directed.

M & L for RCC M-25 design mix as in chajjas and and the like complete all as specified & directed.

M & L for RCC M-25 design mix as in beams and lintels and the like complete all as specified & directed.

M & L for RCC M-25 design mix as in columns and the like complete all as spd & directed.

Use and waste of formwork to soffits of flat surface suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footing with rough finished surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to sides of beam and lintels with rough finished surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to sides of columns with fair finished surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to edges of concrete in roof slab etc similar work n exc 20 cm wide with rough finished surfaces of concrete, complete all as specified and directed.

M&L for cement concrete (1:4:8 type D2 using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S& fixed in repair one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74 cm) white including making connections to trap, and to flush pipe, plastic seat and cover (per sample) with stainless steel or aluminised hinging device complete all as specified and directed.

S&F cast iron cowl for 50 mm dia complete all as specified and directed.

M&L for preparation of old surface after complete removal of existing treatment, making the surface smooth and applying two coat sof cement base paint over a coat of alkali-resistant priming paint complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm ( Single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately.

S&F Peg set of Six powder coated painted (min wt 190gm) , fixed with chromium plated brass screws with plastic cleats complete all as specified and directed.

M&L Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

S&fixed in repairs 15mm bore dia pillar cock, fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately.

S&Fixed in repair 100 mm bore cast iron soil waste and vent pipes (sand cast), ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

S&F in repair in 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints complete all as specified and directed.

All as per item No 115 but 50mm bore pipes.

S&F in repair 75 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F in repair cast iron swan necks (or offsets) upto 152mm projection for 100 mm to 50 mm pipe complete all as specified and directed.

Taking down carefully unsv copper/aluminium point wiring (light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sketch fitting etc removing materials to store for keeping in safe custody for taking credit and making good to disturb surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

M & L for point wiring using 3 x 1.5 Sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable (Phase, neutral and earth wire) drawn through and incl concealed conduit medium grade of dia not less than 20mm and connected to common earth dolly with 1.6 mm thick cadmium plated CI/GI pressed steel sunken boxes and 3 mm thick plastic laminated sheet cover fixed with brass screws complete including cutting grooves for concealed wiring for one light point controlled by one 1 way switch complete all as specified and directed. Note :- 1. Conduit shall be fixed on surface/ceiling with necessary saddles where concealing of conduit is not feasible.

All as per Ser item No 119 abvoe but for One Exhaust fan point controlled by one switch SP, one way, 5 Amps, 240 Volts .

All as per Srl item No 119 above but One multi pin (3/5 pin) socket 5 Amps independent.

All as per Ser item No 119 abvoe but using 2.5 sqmm (nominal area) FRLS PVC insulated multistranded copper conductor cable & 2.5 sqmm size FRLS PVC insulated and unsheathed multistranded copper conductor cable as earth conductor ( green colour) for one 6 pin socket outlet 15Amps multi purpose independent point controlled by 15 Amps switch SP, one way, 240 Volts, complete all as specified and directed.

S&F switch piano flush button single, pole one way, 5 Amps ( ISI marked) complete all as specified and directed.

S & F Socket 2 in 1, 5 pin 5 A (ISI marked) complete all as specified and directed.

S&F socket outlet 2-in-1, 6 pin, 15/5 Amps flush type (ISI marked) complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amps (ISI marked) complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) all as specified and directed.

M & L for exhaust fan AC single phase 230V of size 300 mm sweep heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all as specified.

S&F in replacement fancy type lamp holder jumbo, PVC/Polycarbonate type with back plate complete all as specified and directed.

Supply and fix LED lamp 12 watts 230 volts retfrofit suitable for any type lamp holder as required complete all as specified and directed.

S&F in replacement 1x18W 4ft LED 6500K, 230V surface/wall mounted box type complete with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size in flexible conduit pipe of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in replacement surface mounted 10 Watt 2' box type LED batten as mirror light with wall mounting arrangment including connecting up with 3 core flexible copper conductor cable of suitable size in flexible conduit pipe of suitable size from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F building security light 60W luminaire, having pressure die cast aluminium housing, PC diffuser and integrated electronic driver with high efficiency, with polycarbonate cover, IP-65 protection including 32mm bore light grade GI pipe bracket, mounted on wall or roof including all accessories viz FI clamps, fasteners, nut bolt, washer etc including connecting up with 3 core flexible copper conductor cable in flexible conduit pipe of suitable size complete all as specified and directed.

S & F SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 100Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete all as specified and directed.

S&F MCB single pole with neutral 240 volts 32 Amps, 10KA (B-series) etc complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA, of rating 6 to 32 Amps all as specified and directed.

S&F 1100 volt grade XLPE heavy duty cable, 10 sqmm 2 core, wire armoured with aluminium stranded conductor PVC insulated laid in trenches including taking down existing cable etc complete all as specified and directed. Note :- all the cable entries should be through proper metallic cable gland.

M&L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed.

S&F galvanised tubes 40 mm bore light grade with all fittings laid in trenches including all fiitings all as specified and directed.

M&L for well burned bricks, sub class B designation 75, laid flat (width of protection being equal to length of brick) adjoining each other, for cable protection complete all as specifed and directed.

M & L for earthing complete with G l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh, 20 mm bore light grade GI pipe for watering, 15 mm bore Gl pipe medium grade for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs including testing complete all as specified and directed.

Supply and laying in trenches/on piller GI Pipe 20 mm bore medium grade ISI marked including all fitting laid in trenches/pillar/on wall complete as per site requirement complete.

S&F 20 mm Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, complete all as specified and directed,

Cutting old GI pipes 40/50 mm bore dia only and reducing to required length, before laying in position, for insertion of new tees, branches, etc for repair works, complete all as specified and directed

Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 28684.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

yash paul gupta

WALIA ENTERPRISES

M/S NARESH KUMAR SHARMA

HARI OM ENTERPRISES

M/S HIMANSHU BUILDERS