Loading
Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹5.9 L
Closing Date
15 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WORKS
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (For details refer tender documents)
Similar nature of Work: Construction/repairs/maintenance of any Civil Engg. Works
30 conditions · 2 needing a document upload
Whether History sheet of tenderers (Annexure-2 of Part-II of Tender documents) uploaded duly filled in with supportive documents.
Whether the details of facilities available vis-a-vis the requirements mentioned in STR in a tabular/narrative form if you are not on the approved list of RDSO, if required in the Annexed Document, is submitted.
Whether, EACH PAGE of the copy of documents/certificates in support of credential is self attested/digitally signed by tenderer/authorised representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement", as applicable and mentioned in the bid documents are enclosed with the tender.
Please submit bank details as per enclosed Annexure-12 of Part - II of Tender Documents or photo copy of a "Cancelled Cheque". (For details refer tender documents)
Please submit Certificate of Familiarisation as per Annexure-1 of Part-II of Tender Documents. (For details refer tender documents)
Please submit required details as required from Annexure 2 to 11 of Part-II of Tender documents duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required. Annex-2: HISTORY SHEET OF THE TENDERER, Annex-3: TECHNICAL EIGIBILITY CRITERIA, Annex-4: DETAILS OF CONSTRUCTIONS MACHINERIES, TOOLS & PLANTS, VEHICLES ETC. AVAILABLE (ON HAND AND PROPOSED TO BE UTILISED, Annex-5: DETAILS OF TECHNICAL AND OTHER PERSONNELS AVAILABLE ON HAND & PROPOSED TO BE ENGAGED. Annex- 6: DETAILS OF WORKS COMPLETED DURING PREVIOUS THREE FINANCAIL YEARS & CURRENT YEAR, Annex-7: DETAILS OF WORKS ON HAND, Annex- 8: DECLARATION REGARDING ASSOCIATION OF RAILWAY OFFICER (S) WITH TENDERER(S), A n n e x - 9 : LIST OF COURT CASES, Annex-10: LIST OF ARBITRATION CASES. Annex- 11: BROAD PLAN FOR EXECUTION OF THIS WORK. (For details refer tender documents)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm/Partnership firm/Joint Venture/Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender . The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN card along with the tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (for details refer tender documents) NOTE: Any document containing PAN number of the tenderer(s) shall also be considered in lieu of PAN card. However, if no document having mention of PAN number is uploaded, offer will be summarily rejected. (For details refer Tender documents)
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement) (For details refer Tender documents)
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly, list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (For details refer tender documents)
Documents to be submitted as per Clause 14 of GCC-April 2022 in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents) NOTE: Non submission of above documents will lead to summarily rejection of the offer.
Miscellaneous repairs to service buildings of Rail Vihar at Chandrasekharpur under the jurisdiction of Assistant Divisional Engineer/HQ/BBS of Khurda Road Division.
e-Tender-estatekur-373-25
e-Tender-estatekur-373-25
Open
Works - General
12 Months
Khordha, Odisha
₹0
₹5.9 L
15 Apr 2026
23 Mar 2026
1 Apr 2026
77 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 100 | 177.5 | 17,750 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 50 | 2,123.75 | 1,06,187.5 |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 5000 | 17.6 | 88,000 |
| 4 | With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration | Metre | 1000 | 53.45 | 53,450 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 50 | 7,878.5 | 3,93,925 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 25 | 7,294.7 | 1,82,367.5 |
| 7 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 15 | 10,585.9 | 1,58,788.5 |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 1500 | 107.85 | 1,61,775 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 30 | 7,132.25 | 2,13,967.5 |
| 10 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 80 | 1,123.8 | 89,904 |
| 11 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 50 | 8,752.55 | 4,37,627.5 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 300 | 1,267.95 | 3,80,385 |
| 13 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 3,167.95 | 1,58,397.5 |
| 14 | 20 mm dia | Metre | 100 | 393.25 | 39,325 |
| 15 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 8000 | 238.35 | 19,06,800 |
| 16 | 250x10 mm | Each | 100 | 441.6 | 44,160 |
| 17 | 300x16x5 mm | Each | 100 | 322.2 | 32,220 |
| 18 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 50 | 854.65 | 42,732.5 |
| 19 | 125 mm | Each | 100 | 256.65 | 25,665 |
| 20 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 200 | 121.65 | 24,330 |
| 21 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 50 | 1,124.85 | 56,242.5 |
| 22 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 30 | 492.7 | 14,781 |
| 23 | 30 mm thick pre laminated PVC door shutters | Sqm | 25 | 3,663.8 | 91,595 |
| 24 | Using R2 series with frame (65 mm & above) x (40 mm & above) & glazed sash (25 mm & above) x (50 mm & above) & fly screen sash (18 mm & above) x (40 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). | Sqm | 250 | 9,933.4 | 24,83,350 |
| 25 | Using R2 series with frame (39mm & above ) x (39mm & above). (Height upto 1.2 meter) | Sqm | 30 | 8,054.75 | 2,41,642.5 |
| 26 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1500 | 133.7 | 2,00,550 |
| 27 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 1500 | 172.6 | 2,58,900 |
| 28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 600 | 772.4 | 4,63,440 |
| 29 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | 500 | 1,328.35 | 6,64,175 |
| 30 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 200 | 1,096.55 | 2,19,310 |
| 31 | Size of Tile 600 x 600 mm | Sqm | 3000 | 1,453.65 | 43,60,950 |
| 32 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 40 | 4,481.3 | 1,79,252 |
| 33 | 110 mm diameter | Metre | 150 | 377.4 | 56,610 |
| 34 | 110x110x110 mm | Each | 30 | 234.15 | 7,024.5 |
| 35 | 110 mm | Each | 50 | 371.3 | 18,565 |
| 36 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 500 | 1,355.8 | 6,77,900 |
| 37 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 400 | 738.65 | 2,95,460 |
| 38 | Ridges plain (500 - 600mm) | Metre | 40 | 532.35 | 21,294 |
| 39 | 1:4 (1 cement: 4 fine sand) | Sqm | 300 | 399.45 | 1,19,835 |
| 40 | 1:6 (1 cement: 6 fine sand) | Sqm | 1500 | 383 | 5,74,500 |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 10000 | 156.05 | 15,60,500 |
| 42 | Old work (one or more coats) | Sqm | 20000 | 62.7 | 12,54,000 |
| 43 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 20000 | 73.95 | 14,79,000 |
| 44 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 20000 | 25.15 | 5,03,000 |
| 45 | One or more coats on old work | Sqm | 300 | 102.8 | 30,840 |
| 46 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 10000 | 120.75 | 12,07,500 |
| 47 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 10 | 2,434.25 | 24,342.5 |
| 48 | In cement mortar | cum | 10 | 2,060.2 | 20,602 |
| 49 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 800 | 54.65 | 43,720 |
| 50 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 400 | 263.95 | 1,05,580 |
| 51 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | cum | 25 | 10,117.6 | 2,52,940 |
| 52 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 15 | 6,767.4 | 1,01,511 |
| 53 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 20 | 6,515.55 | 1,30,311 |
| 54 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 20 | 2,301.75 | 46,035 |
| 55 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 20 | 1,683.35 | 33,667 |
| 56 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 50 | 1,607.95 | 80,397.5 |
| 57 | Rectangular shape 1500x450 mm | Each | 10 | 2,093 | 20,930 |
| 58 | C.P. brass | Each | 10 | 803.7 | 8,037 |
| 59 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 20 | 14,999.15 | 2,99,983 |
| 60 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 20 | 18,212.9 | 3,64,258 |
| 61 | 20 mm nominal dia Pipes | Metre | 150 | 537.6 | 80,640 |
| 62 | 25 mm nominal dia Pipes | Metre | 100 | 627.25 | 62,725 |
| 63 | 50 mm nominal dia Pipes | Metre | 120 | 794.25 | 95,310 |
| 64 | 15 mm nominal bore | Each | 50 | 97.75 | 4,887.5 |
| 65 | 100 mm diameter | Each | 50 | 193.95 | 9,697.5 |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 10000 | 11 | 1,10,000 |
| 67 | 15 mm nominal bore | Each | 50 | 506.8 | 25,340 |
| 68 | 15 mm nominal bore | Each | 50 | 820.7 | 41,035 |
| 69 | 15 mm nominal bore | Each | 40 | 798.95 | 31,958 |
| 70 | 15 mm nominal bore | Each | 40 | 670.45 | 26,818 |
| 71 | 15mm nominal bore | Each | 50 | 574.3 | 28,715 |
| 72 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. | Each | 60 | 74.8 | 4,488 |
| 73 | With stainless steel cover plate minimum 1.25 mm thickness | Each | 10 | 2,823.85 | 28,238.5 |
| 74 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to paid separately) | Sqm | 10 | 5,325.9 | 53,259 |
| 75 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 700 | 829.75 | 5,80,825 |
| 76 | Frame size 65 x 100 mm | Metre | 150 | 1,111.3 | 1,66,695 |
| 77 | 30 mm thick | Sqm | 100 | 4,346.7 | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
E Tender Condition
ATTACHMENT
TenderConditions-GCC23.03.2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .