Public Toilet - Dhaliyur Town Panchayat

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high Including all charges etc complete

Dismantling, clearing away and carefully stacking materials useful for re-use of Damagaed Reinforced Cement Concrete using deploying machineries Including all charges etc complete

Earth work excavation for foundation and depositing on bank with initial lead and lift etc. completely I hard stiff clay, stiff black hard redearth, shales, gravelstony earth and earth mixed with small size boulders and hard gravelly soil etc., compltete as per standard specification (SS20B)

Supplying and filling in foundation and basement with filling M sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed.

Plain Cement Concrete 1:4:8 Mix (one part cement, four part Msand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and erectioning steel sheet centering and shuttering including necessery supports for plain surface in foundation and basement for RCC roof rectancular or T beams, L beams, lintel and bedblock staircase waist slap and landing beam etc., with all bracing using M.S sheets spaced at 75cm C/C etc., completly complying with standard specifications.

Below ground level

Column Roof Slab

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part Msand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.

Supplying and fabricating and placing in position of MS or RTS rods for all rainforced works including cost of steel and binding wire and all labour for cutting and fabrication and other incidental charges etc., completly complying with standard specifications.

Brick Work in Cement Mortor 1:5 Mix (one cement, five Msand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Superstructure

Ground Floor (upto Basement)

Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification.

Plastering in cm 1:5, 12 mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Ceiling Plastering in cm 1:3, 10mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Plastering in cm 1:5, 20mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

White washing two coats with best quality of slacked shell lime including cost and conveyence all charges etc.,completly complying with standard specifications.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 6 to 12mm stone chips – 25mm tk etc., Complete.

Dadooing sides of walls with Glazed tiles of size 0.30m x 0.20m x 0.006m including cost and conveyance and all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply and fixing in position of RCC Jolly 50mmtk including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.

Supply, and fixing of Galvalum sheet ( pre painted )0.6mm thick including 15 cm lapping necessary 'J' bolt and nut ,bitumen washer and screws if wooden baterns including cost and conveyance of all materials and labour charges etc complete complying with standard specifications

Supplying and fixing of 110mm dia PVC /4kgpipes including cost and conveyence of all materials and all other labour charges and incidental charges etc., completly complying with standard specifications.

Supply of thousand ltr. capacity PVC (HDPE) water tank including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.1000 litre

Supplying and fixing in position colour glazed INDIAN TYPE WATER CLOSET with 'P' or 'S' trap including cost and conveyance of water closet and labour for fixing including flooring with brick jelly concrete etc., complete

Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Supplying and fixing in position best Indian make colour glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Wiring with 2x1.5 sq.mm (22/0.30) PVC unsheated SC copper cable of 1100V graded in suitable PVC rigid pipe on wall and ceiling with PVC accessories 5A F.T switch intlush with wall corered with hylum sheet of 3mm thick with painting of suitable colour for Open P V C light/Fan point (S.D.20)

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 64)

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 69)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / cormpton / K.like) suitable for in candles cent lamp with 60W bulb (SD 84)

Weathering course concrete with broken brick jelly of 20 mm gauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly welded springing lime jiggery water asper standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Painting two coats new iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

B SUNDAR