CONSTRUCTION OF ONE NO. PANCHAYAT SARKAR BHAWAN AT EACH PANCHAYAT (BHALURA SIMTOKA PANCHAYAT AND RAMPUR SHANBHUTA PANCHAYAT) AT AURAI BLOCK IN MUZAFFARPUR DISTRICT FOR THE YEAR - 2025-26 (ELECTRIFICATION INCLUDED).

Sch. XLV- Form No-61

I /We hereby tender for the execution for the government of Bihar of the work specified in the under write memorandum at the rates specmed there in with in a period of year month from the date of written order to commence and in accordance in all respects with the specification designs, drawing and other documents referred to rule her of and subject to the annexed conditions of contract with, such conditions so as applicable. Executive Engineer,

MEMORANDUM Building Division Muzaffarpur.

(A) If several sub works are included they should be detained in a separte list (A) Name of work- A/R to Ministrial Quarter 2A & 2B at Damuchak, Muzaffarpur for the year 2016-17.

(B) This deposit will be 5% of the estimated cost of the work. This percentage deducation (B) Estimated cost Rs. - 2,54,798.00

(C) from bills will be credited to the contractors security deposit. (C) Earnest money Rs. –

(D) Initial security deposits (including earnest money) to be deposited before the commencement of the work………......................................................................................................................................................................

(E) Percentage to be deducted from bill Rs. 5% (Rupees five percent )……………..…..…..……….…

(F) Time required for the work from date of written order to commence ……… …...……...…...….…… Monthly.

(G) Date of written other to commence ……………… … …………….………………………………

(H) Total number of item of work tender for ………… ……………………………………

S.No/ Item of Work Qty. Rate Unit

Item Code. Rate in Figure Rate in Word

1/15.2.1 Demolishing cement concrete including disposal of material within 50 metre lead:1:3:6 or richer mix 2.02 807.2 Rupees eight hundre seven and twenty paisa only. cum

2/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 19.2 17.9 Rupees seventeen and ninty paisa only. sqm

3/11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm 82.64 1520.9 Rupees one thousand five hundred twenty and ninty paisa only. sqm

4/11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 19.2 1141.6 Rupees one thousand one hundred fourty one and sixty paisa only. sqm

5/21.1.1.1 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 150.64 369.2 Rupees three hundred sixty nine and twenty paisa only. kg

6/21.3.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg 19.37 1017.3 Rupees one thousand seventeen and thirty paisa only. kg

7/9.7.5.1 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked 6.54 916 Rupees nine hundred sixteen only. sqm

8/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 376.15 213.3 Rupees two hundred thirteen and thirty paisa only. sqm

9/13.80 Removi4746.10ng dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete 5031.37 8.1 Rupees eight and ten paisa only. sqm

10/13.80.A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 4746.1 82.8 Rupees eighty two and eighty paisa only. sqm

11/13.78.2+13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 5356.52 58.9 Rupees fifty eight and ninty paisa only. sqm

12/13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 1114.11 48 Rupees fourty eight only. sqm

13/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 247.5 48 Rupees fourty eight only. sqm

14/9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001( Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0.13 102822.7 Rupees one lac two thousand eight hundred twenty two and seventy paisa only. sqm

15/18.15.2 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 5 303 Rupees three hundred three only. each

16/18.16.2 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 3 303 Rupees three hundred three only. each

17/17.2.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and 1 3285.1 Rupees three thousand two hundred eighty five and ten paisa only. each

floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid

18/17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. 7 32.4 Rupees thirty two and fourty paisa only. each

19/17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap each 1604.90 2 1800.2 Rupees one thousand eight hundred and twenty paisa only. each

20/17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1 741.9 Rupees seven hundred fourty one and ninety paisa only. each

21/17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 2 402.9 Rupees four hundred two and ninty paisa only. each

22/9.97.3 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws 2 79.8 Rupees seventy nine and eighty paisa only. each

etc. complete:200x10 mm

23/17.11.1 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm 1 2436.5 Rupees two thousand four hundred thirty six and fifty paisa only. each

24/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 1 3310 Rupees three thousand three hundred ten only. each

25/18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with lamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work.

18.7.1 15 mm nominal outer dia pipes 30.49 128.6 Rupees one hundred twenty eight and sixty paisa only. metre

18.7.3 25 mm nominal outer dia pipes 15.24 204.7 Rupees two hundred four and seventy paisa only. metre

26/18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 1 461.8 Rupees four hundred sixty one and eighty paisa only. each

27/13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratchesetc. complete 606.51 6.4 Rupees six and fourty paisa only. sqm

28/13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/ 10 sqmover and including priming coat of exterior primer pplied@ 2.20 kg/ 10 sqm) 728.71 89.4 Rupees eighty nine and fourty paisa only. sqm

29/12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 62.81 238.3 Rupees two hundred thirty eight and thrity paisa only. metre

30/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.5.2 110mm bend 23 124.7 Rupees one hundred twenty four and seventy paisa only. each

12.79.1.2 110 mm 10 113.6 Rupees one hundred thirteen and sixty paisa only. each

12.79.4.2 Single tee without door 110x110x110mm 5 183.01 Rupees one hundred eighty three and 0 one paisa only. each

31/12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, 45 157.37 Rupees one hundred fifty seven and thirty seven paisa only. each

screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm

32/4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4.57 4681.3 Rupees four thousand six hundred eighty one and thirty paisa only. sqm

33 Carriage of Materials:-

(A) Sone Sand 7.19 2017.65 Rupees two thousand seventeen and sixty five paisa only. m3

(B) Stone Chips 3.43 1765.35 Rupees one thousand seven hundred sixty five and thirty five paisa only. m3

34 Extra Cost of Materials

(A) Cement 68 14.05 Rupees fourteen and 0 five paisa only. P/Bag

35/18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore 3 280.9 Rupees two hundred eighty and ninty paisa only. each

1/OL01 Labour for site celearance do al this complete as per buiding pecification and direction of E/I. 40 236 Rupees two hundred thirty six only. each

2/OL05 Helper for help Plumber do al complete as per building percification and direction of E/I. 46 236 Rupees two hundrd thirty six only. each

3/OL27 Plumber for fitting and fixing do all complete as per buildign percificationand direction of E/I. 60 304.75 Rupees three hundred four and seventy five only. each

4/18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall

18.10.1 15 mm dia 30 167.9 Rupees one hundred sixty seven and ninty paisa only. m

18.10.3 25 mm dia 20 269.2 Rupees two hundred sixty nine and twenty paisa only. m

5/18.15 Providing and fixing brass bib cock of approved quality

18.15.1 15 mm nominal bore 100 273 Rupees two hundred seventy three only. each

18.16.1 Providing and fixing brass stop cock of approved quality 15 mm nominal bore 83 273 Rupees two hundred seventy three only. Each

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 59 481.6 Rupees four hundred eighty one and sixty paisa only. each

18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 20 835.6 Rupees eight hundred thirty five and sixty paisa only. Each

6/18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

18.17.1 Gate Value 15 449.5 Rupees four hundred fourty nine and fifty paisa only. each

18.18.3 Ball Value 10 469.4 Rupees four hundred sixty nine and fourty paisa only. each

7/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) :

18.46.1 G.I. union 15 mm nominal bore 20 134 Rupees one hundred thirty four paisa. Each

18.46.3 G.I. Union 25 mm nominal bore 10 170.6 Rupees one hundred seventy and sixty paisa. Each

18.17.5 G.I. Pipe 40 mm 15 322.4 Rupees three hundred twenty two and fourty paisa only. m

8/18.48 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. 8000 6.6 Rupees Six and sixty paisa. Per Liter

9/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 CPVC Pipe 15mm dia 80 126.6 Rupees one hundred twenty six and sixty paisa only. m

18.9.3 CPVC Pipe 25mm dia 90 193.6 Rupees one hundred ninty three and sixty paisa only. m

18.3.5 CPVC Pipe 40mm dia 1000 339.7 Rupees three hundred thrity nine and seventy paisa only. m

17.28.1 PVC Waiste Pipe 50 78.5 Rupees seventy eight and fifty paisa only. each

10/17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings

and fixtures complete.10 litre capacity - White

17.18.1 PVC Low Level Flushing 25 859.4 Rupees eight hundred fifty nine and fourty paisa only. each

12.78.1 PVC 75 mm Dia 10 127.3 Rupees one hundred twenty seven and thirty paisa only. m

12.78.2 PVC 110 mm Dia 80 212.4 Rupees two hundred twelve and fourty paisa only. m

11/17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap each 10 1818.5 Rupees one thousand eight hundred eighteen and fifty paisa only. each

17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 2859.90 15 2859.9 Rupees two thousand eight hundred fifty nine and ninty paisa only. each

12/18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

18.22.2 150 mm diameter 20 89.9 Rupees eighty nine and ninty paisa only. each

23/6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floorV cum 5003.9 Rupees five thousand three and ninty paisa. Cum

24/5.3+5.33B.4 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing M-15grade R.C.C instead of M-20 grade R.C.C. 5124.9 Rupees five thousand one hundred twenty four and ninty paisa. Cum

25/5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 291 Rupees two hundred ninty one. Sqm

26/5.22 Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 56 Rupees fifty six. Kg

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four. Kg

27/13.24.2 6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand) 87.4 Rupees eighty sevenand forty paisa. Sqm

28/13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa. Sqm

29/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa. Sqm

30/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 799.4 Rupees seven hundred ninty nine and forty paisa. Sqm

15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

31/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per 253.8 Rupees two hundred fifty three and eighty paisa. Sqm

building specification and direction of E/l,

32/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) 3323.1 Rupees three thousand three hundred thirty three and ten paisa. Cum

33/13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine. Sqm

34/10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete 2843 Rupees two thousand eight hundred forty three. Sqm

blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except Doors.

35/9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately). Local wood 47639.7 Rupees forty seven thousand six hundred thirty nine and seventy paisa. Cum

36/13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratchesetc. complete 4.6 Rupees four and sixty paisa. Sqm

37/13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) 22 Rupees twenty two. Sqm

38/13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 42.8 Rupees forty two and eigty paisa. Sqm

39/13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 40.7 Rupees forty and seventy paisa. Sqm

40/12.1.5 Providing corrugated G.S. sheet roofing fixed with G.I.J. or hooks, bolts and nuts 8 mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto a 618.8 Rupees six hundred eighteen and eighty paisa. Sqm

pitch of 60°) excluding the cost or purlins, rafters and trusses. 0.63 mm thick with zinc coating not less than 275 gm/m2

41/15.28.1 Dismantling roofing including ridges, hips valleys and guttersetc. and stacking the material within 50 metres lead of: G.S. Sheet 40.2 Rupees forty and twenty paisa. Sqm

42/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground 171 Rupees one hundred seventy one. Sqm

within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand)

43/22.9.2 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as lOOmicron HMHDPE film sandwitched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat which shall be paid for separately as per DSR Item No. 12.19. 313.5 Rupees three hundred thirteen and fifty paisa. Sqm

44/13.13.1 20 mm cement plaster of mix ; 1:3 (1 cement: 3 coarse sand) 182.3 Rupees one hundred eighty two and thirty paisa. Sqm

45/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa. Sqm

46 Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

47 Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/5.3+5.33B.4 Reinforced cement conrete work in eams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using ementcontent as per approved design ix,including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to ccelerate,reinforcement,durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. 5124.9 Rupees five thousand one hundred twenty four and ninty paisa only. m3

2/5.22.7B Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees forty four and seventy paisa only. kg

3/5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 261.7 Rupees two hundred sixty one and seventy paisa only. m2

5.9.4 Shelves (Cost in situ) 291 Rupees two hundred ninty one only. m2

4/10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. 76.7 Rupees seventy six and seventy paisa only. kg

gates & similar works.

5/12.1.5 Providing corrugated G.S. sheet roofing fixed with G.I.J. or hooks, bolts and nuts 8 mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto a pitch of 60°) excluding the cost or purlins, rafters and trusses. 0.63 mm thick with zinc coating not less than 275 gm/m2 618.8 Rupees six hundred eighteen and eighty paisa only. m2

6/12.10.1 Providing asbestos cement 6 mm thick corrugated sheets roofing and fixing with G.I. J or L hooks bolts and nuts 8 mm dia G. I. plain and bitumen washers complete excluding the cost or purlins, rafters and trusses corrugated sheet. upto 60 degree pitch 328.4 Rupees three hundred twenty eight and forty paisa only. m2

7/6.1.12/1+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor 5237.7 Rupees five thousand two hundred thirty seven and seventy paisa only. m2

8/13.11.4 Cement plaster in course sand 1:6(1 cement: 6 coarse sand 101.2 Rupees one hundred one and twenty paisa only. m2

9/13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: 13.78.1 Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 90.1 Rupees ninty and ten paisa only. m2

10/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. kg

11/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa only. m2

12/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. m2

13/15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 18.4 Rupees eighteen and fourty paisa only. m2

14/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. m2

15/13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine only. m2

16/9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Local wood 47639.7 Rupees fourty seven thousand six hundred thirty nine and seventy paisa only. m2

17/9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. 30 mm thick 1363.1 Rupees one thousand three hundred sixty three and ten paisa only. m2

18/9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x10 mm 182 Rupees one hundred eighty two only. each

19/9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm 64.7 Rupees sixty four and seventy paisa only. each

20/9.100.2 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 100 mm 54.6 Rupees fifty four and sixty paisa only. each

21/6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and 512.8 Rupees five hundred twelve and eighty paisa only. m

22/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one only. m2

23/13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 42.8 Rupees forty two and eighty paisa only. each

24/13.73.3 Colour washing such as green, blue or buff to give an even shade Old work (two or more coats) with lime 22 Rupees twenty two only. m2

25/13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees forty and seventy paisa only. m2

26/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees forty and seventy paisa only. m2

27/ Carriage of Materials:-

(A) Brick 531.02% Rupees five hundred thirty one and two paisa only. Nos

(B) Local Sand 181.48 Rupees one hundred eighty one and forty eight paisa only. m3

(C) Stone sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa only. m3

(D) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa only. m3

28/ Extra Cost of Materials

(A) Brick 370.75% Rupees three hundred seventy and seventy five paisa only. Nos

(B) Cement 15.95 Rupees fifteen and ninty five paisa only. Bag

1/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees twelve and eighty paisa only. sqm

2/15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 18.4 Rupees eighteen and forty paisa only. sqm

3/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. cum

4/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and 799.4 Rupees seven hundred ninty nine and forty paisa only. sqm

matching pigment etc., complete.

5/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. sqm

6/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 3049.3 Rupees three thousand forty nine and thirty paisa only. each

7/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 2970 Rupees two thousand nine hundred seventy only. each

8/17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm 2859.9 Rupees two thousand eight hundred fifty nine and ninty paisa only. each

sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 2859.90

9/17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap each 1818.5 Rupees one thousand eight hundred eighteen and fifty paisa only. each

10/18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

18.8.1 15 mm nominal outer dia Pipes 221.4 Rupees two hundred twenty one and forty paisa only. metre

18.8.2 20 mm nominal outer dia Pipes 249.2 Rupees two hundred forty nine and twenty paisa only. metre

11/18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 481.6 Rupees four hundred eighty one and sixty paisa only. each

12/12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 212.4 Rupees two hundred twelve and forty paisa only. metre

13/12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 168.3 Rupees one hundred sixty eight and thirty paisa only. each

12.79.4.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110x110x110 mm 257.3 Rupees two hundred fifty seven and thirty paisa only. each

12.79.3.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110x110x110mm 306.1 Rupees three hundred six and ten paisa only. metre

14/12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, 144.49 Rupees one hundred forty four and forty nine paisa only. each

screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm

15/13.8 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratchestec. Gmplete 5.9 Rupees five and ninty paisa only. sqm

16/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one paisa only. sqm

17/13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches 118.4 Rupees one hundred eighteen and forty paisa only. sqm

18/13.46A.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coat applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/ 10 sqm) 83.6 Rupees eighty three and sixty paisa only. sqm

19/13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 69.1 Rupees sixty nien and ten paisa only. sqm

20/15.13.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead. Of area 3 sqm and below 35 Rupees thirty five paisa only. each

21/6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 5003.9 Rupees five thousand three and ninty paisa only. cum

22/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 230.5 Rupees two hundred thirty and fifty paisa only. sqm

23/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees two hundred four and forty paisa only. cum

24/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

25/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4530.3 Rupees four thousand five hundred thirty and thirty paisa only. cum

26/5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 5139.7 Rupees five thousand one hundred thirty nine and seventy paisa only. cum

27/5.3+5.33B Reinforced cement conrete work in eams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing M-15grade R.C.C instead of M-20 grade R.C.C. 5124.9 Rupees five thousand one hundred twenty four and ninty paisa only. cum

28/5.9.6 Centring and shuttering including trutting,propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts 357.6 Rupees three hundred fifty seven and sixty paisa only. sqm

29/5.9.5 Centring and shuttering including trutting,propping etc. and removal of form for Lintels, beams, plinth bams, griders, bressumers and contilevers. 261.7 Rupees two hundred sixty one and seventy paisa only. sqm

30/5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 56 Rupees fifty six paisa only. kg

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 53.4 Rupees fifty three and fourty paisa only. kg

5.22.7D Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. 54.4 Rupees fifty four and forty paisa only. kg

31/10.5 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 4248.2 Rupees four thousand two hundred forty eight and twenty paisa only. sqm

32/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six paisa only. kg

33/8.9.1.2 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/ sqm including pointing in white cement complete. Granite of any colour and shade 1624.4 Rupees one thousand six hundred twenty four and forty paisa only. sqm

34/11.20.4 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) Ordinary cement without any pigments 610.3 Rupees six hundred ten and thirty paisa only. sqm

35/13.13.1+13.36.5 20 mm cement plaster of mix ;1:3 (1 cement: 3 coarse sand) Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20 mm cement plaster 1:3(1 cement:3 sand) 198.8 Rupees one hundred ninty eight and eighty paisa only. sqm

36/21.1.1.1 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 347.9 Rupees three hundred forty seven and ninty paisa only. kg

37/21.3.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) kg 998.4 Rupees nine hundred ninty eight and forty paisa only. sqm

38/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa only. sqm

13.82.3 Old steel work (one or more coats) 40.7 Rupees forty and seventy paisa only. sqm

13.82.4 Old wood work (one more coats) 40.7 Rupees forty and seventy paisa only. sqm

39/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Local Sand 181.48 Rupees one hundred eighty one and forty eight paisa only. Per M3

(D) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

40/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

41/18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 650.1 Rupees six hundred fifty and ten paisa only. each

42/8.6 Mirror polishing on marble work/stone work where ever required to give high gloss finish complete 155.2 Rupees one hundred fifty five and twenty paisa only. sqm

1/13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete 4.6 Rupees Four and Paisa Six only Sqm

2/13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 69.1 Rupees Sixty nine and Paisa ten only Sqm

3/13.75 Distempering with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade. 46.7 Rupees Fourty six and Paisa Seventy only Sqm

4/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees Fourty and Paisa Seventy only Sqm

5/13.80A.1 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete 77.4 Rupees Seventy seven and Paisa fourty only

6/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees One hundred seventy one only Sqm

7/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 230.5 Rupees Two hundred Thirty and Paisa Fifity only Sqm

8/19.6.4 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe 471.1 Rupees Four hundred Seventy one and paisa ten only Sqm

9/9.29 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical 8.06 Rupees Eight and Paisa six only Sqm

grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

10/6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 5003.9 Rupees Five thousand three and Paisa ninety only Sqm

11/ Carriage of Materials

A Couarse sand 1395.42 Rupees One thousend three hundred ninety five and paisa fourty two only m3

B Bricks 531.02 Rupees Five hundred thirty one and Paisa two only %Nos

12/ Extra Cost of Materials

A Cement 15.95 Rupees Fifteen and Paisa Ninety five only Bag

B Bricks 370.75 Rupees Three hundred seventy and Paisa Seventy five only %Nos

13/9.46.2 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia metre 353.9 Rupees Three hundred Fifty three and Paisa Ninety only M

1/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees twelve and eighty paisa. Sqm

2/13.11.1+13.36.1 Cement plaster in course sand 1:3 (1 cement:3 coarse sand) Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) 135.5 Rupees one hundred thirty five and fifty paisa only. Sqm

3/22.18.1 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vitalphysical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. 2 mm (for corrugated roof sheets). 339.5 Rupees three hundred thirty nine and fifty paisa only. Sqm

4/15.7.4 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar 491.3 Rupees four hundred ninty one and thirty paisa only. cum

5/6.1.12/1+6.4A Brick work with bricks of class designation 100A in foundations and plinth in Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for brick work in superstructure above floor V level for each four floors or part thereof. 5234.7 Rupees five thousand two hundred thirty four and seventy paisa only. cum

6/13.11.4 Cement plaster in course sand 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa only. Sqm

7/0L27+16% Labour ingage for septic tank over terrau do all complete job of E/I.

Plumber 304.75 Rupees three hundred four and seventy five paisa only. Nos

Helper 236.9 Rupees two hundred thirty six and ninty paisa only. Nos

8/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.3 25 mm 25 mm nominal outer dia Pipes 193.6 Rupees one hundred ninty three and sixty paisa only. Metre

18.9.2 20 mm nominal outer dia Pipes 147.3 Rupees one hundred forty seven and thirty paisa only. Metre

9/18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 449.5 Rupees four hundred forty nine and fifty paisa only. Each

10/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore

18.46.3 25 mm nominal bore 170.6 Rupees one hundred seventy and sixty paisa only. Each

18.46.2 20 mm nominal bore 158.4 Rupees one hundred fifty eight and forty paisa only. Each

11/10.7.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a 2503 Rupees two thousand five hundred three only. Sqm

priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross

12/13.82.1+13.81.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 86.4 Rupees eighty six and forty only. Sqm

13/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

14/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

15/2602E Deduct seivable Bricks obtained from dismentaling do all complete job of E/I. 5923.05 five thousand nine hundred twenty three and five paisa only. P%0

1/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 15 mm nominal outer dia Pipes 126.6 Rupees one hundred tewnty six and sixty paisa only. Metre

18.9.2 20 mm nominal outer dia Pipes 147.3 Rupees one hundred forty seven and thirty paisa only. Metre

18.9.4 32 mm nominal outer dia Pipes 249 Rupees two hundred forty nine only. Metre

2/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

18.46.1 15 mm nominal bore 134 Rupees one hundred thirty four only. Each

18.46.2 20 mm nominal bore 158.4 Rupees one hundred fifty eight and forty paisa only. Each

18.46.4 32 mm nominal bore 213.3 Rupees two hundred thirteen and thirty paisa only. Each

3/17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings 859.4 Rupees eight hundred fifty nine and forty paisa only. Each

and fixtures complete.

4/18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 835.6 Rupees eight hundred thirty five and sixty paisa only. Each

5/18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 650.1 Rupees six hundred fifty and ten paisa only. Each

6/18.15 Providing and fixing brass bib cock of approved quality 273 Rupees two hundred seventy three only. Each

7/17.10.2.1 Kitchen sink without drain board 610*510 mm bowl depth 200mm 4394 Rupees four thousand three hundred ninty four only. Each

8/18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 6.6 Rupees six and six paisa only. Per Lt

9/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rest 3049.3 Rupees three thousand forty nine and thirty paisa only. Each

10/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with anually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and 2970 Rupees two thousand nine hundre seventy only. Each

floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

11/12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Sqm

12.78.1 75 mm diameter 127.3 Rupees one hundred twenty seven and thirty paisa only. Mt

12.78.2 110 mm diameter 212.4 Rupees two hundred twelve and forty paisa only. Mt

12/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Each

12.79.4.1 Single tee without door 75x75x75mm 196.8 Rupees one hundred ninty six and eighty paisa only. Each

12.79.4.2 Single tee without door 110x110x110mm 257.3 Rupees two hundred fifty seven and thirty paisa only. Each

12.79.5.1 Band 87.50; 75mm bend 112.9 Rupees one hundred twelve and ninty paisa only. Each

12.79.5.2 Band 87.50; 110mm bend 168.3 Rupees one hundred sixty eight and thirty paisa only. Each

13/6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av.150mm clear depth and 125mm apron concrete (1: 4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and 512.8 Rupees five hundred twelve and eighty paisa only. Mt

14/13.79.2 Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 42.8 Rupees forty two and eighty paisa only. sqm

15/13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) 22 Rupees twenty two only. Sqm

16/11.19.4 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) 720.9 Rupees seven hundred twenty and ninty paisa only. Sqm

17/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. Kg

18/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees forty and seventy paisa. Sqm

19/13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine only. Sqm

20/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per 253.8 Rupees two hundred fifty three and eighty paisa only. Sqm

building specification and direction of E/l,

21/18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 138.5 Rupees one hundred thirty eight and fifty paisa only. Each

22/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 15 mm nominal outer dia Pipes 126.6 Rupees one hundred twenty six and sixty paisa only. Metre

18.9.2 20 mm nominal outer dia Pipes 147.3 Rupees one hundred forty seven and thirty paisa only. Metre

23/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

18.46.1 15 mm nominal bore 134 Rupees one hundred thirty four only. Each

18.46.2 20 mm nominal bore 158.4 Rupees one hundred fifty eight and forty paisa only. Each

24/ Carriage Materials

Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa only. Per M

Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa only. Per M

Bricks 531.02 Rupees five hundred thirty one and two paisa only. Per%ono

25/ Extra Cost of Materials

Cement 15.95 Rupees fifteen and ninty five paisa only. Per Bag

Bricks 370.75 Rupees three hundred seventy and seventy five paisa only. Per%ono

1/13.80A.1 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete 77.4 Rupees three thousand two hundred sixty three and seventy paisa only. Sqm

2/13.77.2 istempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) 69.1 Rupees sixty nine and ten paisa only. Sqm

3/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees forty and seventy paisa only. Sqm

4/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one only. Sqm

5/18.49 Providing and fixing C.P. brass bib cock of approved qualityconforming to IS:8931 481.6 Rupees four hundred eighty one and sixty paisa only. Each

6/18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms 120.2 Rupees one hundred twenty and twenty paisa only. Each

7/18.16.1 Providing and fixing brass stop cock of approved quality 15 mm nominal bore 273 Rupees two hundred seventy three only. Each

8/17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings 859.4 Rupees eight hundred fifty nine and forty paisa only. Each

and fixtures complete. 10 litre capacity - White

9/18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15 mm nominal bore 532.4 Rupees five hundred thirty two and forty paisa only. Each

10/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, 3049.3 Rupees three thousand forty nine and thirty paisa only. Each

including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and floors wherever required White Vitreous china Orissa pattern W.C. pan of size

580x440 mm with integral type foot rests

11/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white 2970 Rupees two thousand nine hundred seventy only. Each

P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid

12/17.28.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 78.5 Rupees seventy eight and fifty paisa only. Each

13/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. Sqm

14/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3741.3 Rupees three thousand seven hundred forty one and thirty paisa only. Cum

15/17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms 377.6 Rupees three hundred seventy seven and sixty paisa. Each

16/18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 160.4 Rupees one hundred sixty and forty paisa only. Each

17/9.51.2 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with mild steel U beading 525.1 Rupees five hundred twenty five and ten paisa only. Sqm

18/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 15 mm nominal outer dia Pipes 126.6 Rupees one hundred twenty six and sixty paisa only. Metre

18.9.2 20 mm nominal outer dia Pipes 147.6 Rupees one hundred forty seven and sixty paisa only. Metre

18.9.3 25 mm nominal outer dia Pipes 193.6 Rupees one hundred ninty three and sixty paisa only. Metre

19/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

18.46.1 15 mm nominal bore 134 Rupees one hundred thirty four only. Metre

18.46.2 20 mm nominal bore 158.4 Rupees one hundred fifty eight and forty paisa only. Metre

18.46.3 25 mm nominal bore 170.6 Rupees one hundred seventy and sixty paisa only Metre

20/ Labour Required for Repair and Supply

0L27+16% Plumber 304.75 Rupees three hundred four and seventy five paisa only. Each

0L05+16% Helper 236.9 Rupees two hundred thirty six and ninty paisa only. Each

21/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

22/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

1/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees Twelve and paisa eighty only. sqm

2/13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 87.4 Rupees Eighty Seven and Paisa Forty only Sqm

3/13.11.2 Cement plaster in course sand 1:4(1 cement :4 coarse sand) 101.2 Rupees One hundred one and Paisa Twenty only Sqm

4/21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness 998.4 Rupees Nine hundred Ninety eighty and Paisa forty only Sqm

5/13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 77.4 Rupees Seventy Seven and Paisa forty only Sqm

6/13.78.2+13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 50.1 Rupees Fifty and Paisa Ten only Sqm

7/13.45.1 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 122.6 Rupees One hundred Twenty two and Paisa Sixty only Sqm

8/13.82.3+13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old wood work (one more coats) 40.7 Rupees Forty and Paisa Seventy only Sqm

9/ Carriage of Materials:

Sone & Sand 1395.42 Rupees One thousend Three hundred ninety five and Paisa Forty two only Sqm

10/ Add Extra Cost in rate of Materials

Cement 15.951 Rupees Fifteen and Paisa Nine hundred fifty one only Bag

11/18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested

18.42.1 Up to 6 metres depth 239.8 Rupees Two hundred thirty nine and Paisa eighty only Meter

18.42.2 Beyond 6 m and up to 12 m depth 285.3 Rupees Two hundred eighty five and Paisa thirty only Meter

18.42.3 Beyond 12 m and up to 18 m depth 333 Rupees Three hundred thirty three only Meter

12/24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -incharge. 444.2 Rupees Four hundred Fourty four and Paisa Twenty only Meter

13/24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 166.6 Rupees one hundred Sixty six and Paisa Sixty only Each

14/24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 974.6 Rupees Nine hundred Seventy four and Paisa Sixty only Each

15/24.15.1 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 205.6 Rupees Two hundred Five and Paisa Sixty only Each

16/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 230.5 Rupees Two hundred thirty and Paisa Fifty only Each

17/24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 649.4 Rupees Six hundred forty nine and Paisa forty only Each

18/18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 6.6 Rupees Six and Paisa Sixty only Per litre

19/ Supplying & installing ternors+commissionies submersible Pump 1 HP do all Coup hil fill 20000 Rupees Twenty thousend only PC

20/18.10.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 394.1 Rupees Three hundred ninety four and Pasa ten only Metre

1/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 15 mm nominal outer dia Pipes 126.6 Rupees one hundred tewnty six and sixty paisa only. Metre

18.9.2 20 mm nominal outer dia Pipes 147.3 Rupees one hundred forty seven and thirty paisa only. Metre

18.9.3 25 mm nominal outer dia Pipes 193.6 Rupees one hundred ninty three and sixty paisa only. Metre

18.9.4 32 mm nominal outer dia Pipes 249 Rupees two hundred forty nine only. Metre

2/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

18.46.1 15 mm nominal bore 134 Rupees one hundred thirty four only. Each

18.46.2 20 mm nominal bore 158.4 Rupees one hundred fifty eight and forty paisa only. Each

18.46.3 25 mm nominal bore 170.6 Rupees one hundred seventy and sixty paisa only. Each

18.46.4 32 mm nominal bore 213.3 Rupees two hundred thirteen and thirty paisa only. Each

3/17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings 859.4 Rupees eight hundred fifty nine and forty paisa only. Each

and fixtures complete.

4/18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 835.6 Rupees eight hundred thirty five and sixty paisa only. Each

5/18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore 481.6 Rupees four hundred eighty one and sixty paisa only. Each

6/18.16.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 273 Rupees two hundred seventy three only. Each

7/17.10.2.1 Kitchen sink without drain board 610*510 mm bowl depth 200mm 4394 Rupees four thousand three hundred ninty four only. Each

8/18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 6.6 Rupees six and six paisa only. Per Lt

9/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rest 3049.3 Rupees three thousand forty nine and thirty paisa only. Each

10/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with anually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and 2970 Rupees two thousand nine hundre seventy only. Each

floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

11/12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.78.1 75 mm diameter 127.3 Rupees one hundred twenty seven and thirty paisa only. Mt

12.78.2 110 mm diameter 212.4 Rupees two hundred twelve and forty paisa only. Mt

12/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Each

12.79.4.1 Single tee without door 75x75x75mm 196.8 Rupees one hundred ninty six and eighty paisa only. Each

12.79.4.2 Single tee without door 110x110x110mm 257.3 Rupees two hundred fifty seven and thirty paisa only. Each

12.79.5.1 Band 87.50; 75mm bend 112.9 Rupees one hundred twelve and ninty paisa only. Each

12.79.5.2 Band 87.50; 110mm bend 168.3 Rupees one hundred sixty eight and thirty paisa only. Each

13/17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm 636.9 Rupees six hundred thirty six and ninty paisa only. Mt

14/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. Kg

15/13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/ 10 sqmover and including priming coat of exterior primer pplied@ 2.20 kg/ 10 sqm) 71.1 Rupees seventy one and ten paisa only. Sqm

16/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. Cum 3850.50 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred thirty tewnty three and ten paisa only. Cum

17/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per 253.8 Rupees two hundred fifty three and eighty paisa only. Sqm

building specification and direction of E/l,

18/11.19 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing completeon 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Light shade using white cement 908.5 Rupees nine hundred eight and fifty paisa only. Sqm

19/ Carriage Materials

Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa only. Per M

Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa only. Per M

Bricks 531.02 Rupees five hundred thirty one and two paisa only. Per%ono

20/ Extra Cost of Materials

Cement 15.95 Rupees fifteen and ninty five paisa only. Per Bag

Bricks 370.75 Rupees three hundred seventy and seventy five paisa only. Per%ono

1/20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classificationof soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr, Lead in eluding all lifts, all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth ) 107.1 Rupees one hundred seven and ten paisa only. Metre

2/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees two hundred four and forty paisa only. cum

3/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

4/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work uptoplinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred thirty three and ten paisa only. cum

5/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4530.3 Rupees four thousand five hundred thirty and thirty paisa only. cum

6/6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 4490.6 Rupees four thousand four hundred ninty and sixty paisa only. cum

7/6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor 5003.93 Rupees five thousand three and ninty three paisa only. cum

8/5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 5139.7 Rupees five thousand one hundred thirty nine and seventy paisa only. kg

9/5.3+5.33B4 Reinforced cement conrete work in eams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing M-15grade R.C.C instead of M-20 grade R.C.C. 5124.9 Rupees five thousand one hundred forty four and ninty paisa only. cum

10/5.22 Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete. Mild steel 8.0 mm dia 56 Rupees fifty six only. kg

11/5.22 Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete. Mild steel 10.0 mm dia 54.7 Rupees fifty four and seventy paisa only. kg

12/5.9.1 Centring and shuttering including trutting, propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete 169 Rupees one hundred sixty nine only. sqm

13/5.9.6 Centring and shuttering including trutting,propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts 357.6 Rupees three hundred fifty seven and sixty paisa only. sqm

14/5.9.5 Centring and shuttering including trutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 261.7 Rupees two hundred sixty one and seventy paisa only. sqm

15/5.9.3 Centring and shuttering including trutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 291 Rupees two hundred ninty one only. sqm

16/13.11.4 Cement plaster in course sand 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa only. sqm

17/13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 87.4 Rupees eighty seven and forty paisa only. sqm

18/13.78.1+13.75.2 Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer Distempering with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade. 90.1 Rupees ninty and ten paisa only. sqm

19/13.23.1+13.36.5 20 mm cement plaster of mix: Extra for providing and mixing water proofing material in proportionrecommended by the manufactures: 20 mm cement plaster 1:3 (1 cement:3sand) 192.8 Rupees one hundred ninty two and eighty paisa only. sqm

13.17.1 12 mm cement plaster 1:3 1 cement:3 coarse sand finished with a floating coat of near cement 159 Rupees one hundred fifty nine only. sqm

20/ Carriage of Materials:-

(A) Coarse Sand 1395.4 Rupees one thousand three hundred ninty five and forty paisa only. m3

Local Sand 181.48 Rupees one hundred eighty one and forty eight paisa only. m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa only. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa only. P%0

21/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa only. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa only. P%0

1/0L01 For side clearance and cleaning do all complete job 238.96 Rupees two hundred thirty eight and ninty six paisa only. Nos

2/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) 3323.1 Rupees three thousand three hundred thirty three and ten paisa only. Cum

3/13.11.2 Cement plaster in course sand 12 mm cement plaster of mix: 1:4(1 cement :4 coarse sand) 114.7 Rupees one hundred fourteen and seventy paisa only. Sqm

4/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one only. cum

5/13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 42.8 Rupees forty two and eighty paisa only. sqm

6/15.5 Reinforced cement concrete work in arhes, archribs, domes, vaults, shells, folded plate and roofs having slope more than 150 upto floor five level excluding the cost of centring. Shuttering. Finishing and reinforement with 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size) 150.2 Rupees one hundred fifty and twenty paisa only. per rcc

7/6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 4490.6 Rupees four thousand four hundred ninty and sixty paisa only. cum

8/NS S/M/F watch tower all complete job 15000 Rupees fifteen thousand only. Nos

9/ Carriage of Materials

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

10/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/15.58 Providing sal ballah barricading with departmental sal ballah average 150 dia. And 2M long sal ballah post at interval of 2.5 M C/C fixed 0.5 M average below ground, packed with earth and Brick bats, well watered and rammed with three rows of average 100mm dia. Sal ballah horizontal runners fixed with iron spikes and wires, white washing one coat to exposed surface, dismantling the barricade after function, filling the holes, excluding carriage of sal ballah from and to godown up to 5K.M. lead, stacking them in countable stacks in godown including cost of all labour and materials and taxes all complete job as per specification and direction of E/l. 150.2 Rupees one hundred fifty and twenty paisa only. Per M

2/5.9.3 Centring and shuttering including trutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 291 Rupees two hundred ninty one only. Sqm

3/ Labour required for Emergency Works 238.96 Rupees two hundred thirty eight and ninty six paisa only. Each

1/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees Two hundred four and forty paisa only. cum

2/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

3/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. cum

4/11.20.4 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) Ordinary cement without any pigments 610.3 Rupees six hundred ten and thirty paisa only. sqm

5/15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: From brick work in mud mortar 839 Rupees eight hundred thirty nine paisa only. cum

6/6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 4490.6 Rupees four thousand four hundred ninty and sixty paisa only. cum

7/13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine paisa only. sqm

8/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy paisa only. sqm

9/9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1515.1 Rupees one thousand five hundred fifteen and ten paisa only. sqm

10/13.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New wood work (two or more coats) 63.6 Rupees sixty three and sixty paisa only. sqm

11/9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc 86 Rupees eighty six paisa only. kg

12/13.82.1 New steel work (two or more coats) Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 63.6 Rupees sixty three and sixty paisa only. sqm

13/13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete 4.6 Rupees four and sixty paisa only. sqm

14/13.80A2 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 118.4 Rupees one hundred eighteen and forty paisa only. sqm

15/13.78.2+13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 50.1 Rupees fifty and ten paisa only. sqm

16/13.78.2+13.79.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 69.7 Rupees sixty nine and seventy paisa only. sqm

17/13.82.3+13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) Old wood work (one more coats) 40.7 Rupees forty and seventy paisa only. sqm

18/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees sqm

19/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Local Sand 181.48 Rupees one hundred eighty one and forty eight paisa only. per m3

(D) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

20/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 18.4 Rupees eighteen and forty paisa only. sqm

2/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees twelve and eighty paisa only. sqm

3/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. sqm

4/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and 799.4 Rupees seven hundred ninty nine and forty paisa only sqm

matching pigment etc., complete.

5/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. sqm

6/11.20.3 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) Dark shade using ordinary cement 642 Rupees six hundred forty two paisa only. sqm

7/9.48.1 Fixed to steel windows by welding Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 86 Rupees eighty paisa only. kg

8/13.82.1 New steel work (two or more coats) Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 63.6 Rupees sixty three and sixty paisa only. sqm

9/21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 347.9 Rupees three hundred forty seven and ninty paisa only. kg

10/21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness 998.4 Rupees nine hundred ninty eight and forty paisa only. sqm

11/9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Local wood 47639.7 Rupees fourty seven thousand six hundred thirty nine and seventy paisa only. cum

12/9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. 30 mm thick 1363.1 Rupees one thousand three hundred sixty three and ten paisa only. sqm

13/13.82.2+13.81.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New wood work (two or more oats)Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood 90.3 Rupees ninty and thirty paisa only. sqm

14/9.143 Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having 420.8 Rupees four hundred twenty and eighty paisa only. metre

wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineerin- charge.

15/9.142.1 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 2710.5 Rupees two thousand seven hundred ten and fifty paisa only. sqm

mm,out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes

bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with

the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel,all complete as per manufacturer’s specification and direction of Engineer-in-charge. Non decorative finish (matt finish)

16/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 3049.3 Rupees three thouand forty nine and thirty paisa only. each

17/18.15.1 Providing and fixing brass bib cock of approved quality :15 mm nominal bore 273 Rupees two hundred seventy three paisa only. each

18/18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with lamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work.

a 15 mm nominal outer dia pipes 138.7 Rupees one hundred thirty eight and seventy paisa only. each

b 25 mm nominal outer dia pipes 206.8 Rupees two hundred six and eighty paisa only. each

19/18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making ecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. c.p. brass fittings 6.6 Rupees six and sixty paisa only. letre

20/9.62.1 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm 166.1 Rupees one hundred sixty six and ten paisa only. each

21/14.5.2 Renewing glass panes, with putty and nails wherever necessary: Float glass panes weighing 10 kg/m2 (4mm thick glass) 618.1 Rupees six hundred eighteen and ten paisa only. sqm

22/9.63.1 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250x10 mm 65.3 Rupees sixty five and thirty paisa only. each

23/9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete: 125 mm 27.7 Rupees twenty seven and seventy paisa only. each

24/12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 212.4 Rupees two hundred twelve and forty paisa only. metre

25/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.5.2 110 mm bend 168.3 Rupees one hundred sixty eight and thirty paisa only. each

12.79.6.2 110m Shoe 305.05 Rupees three hundred five and point five paisa only. each

26/12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 144.49 Rupees one hundred forty four and forty nine paisa only. each

27/13.74 Removing white or colour wash by scrapping and sand paper in andpreparing the surface smooth including necessary repair scratcheetc. complete 4.6 Rupees four and sixty paisa only. sqm

28/13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade Old work (one or more coats) 22 Rupees twenty two paisa only. sqm

29/13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 42.8 Rupees forty two and eighty paisa only. sqm

30/13.82.3+13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) Old wood work (one more coats) 40.7 Rupees forty and seventy paisa only. sqm

31/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one paisa only. sqm

32 Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

33 Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

1/6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 4490.6 Rupees four thousand four hundred ninty and sixty paisa only. cum

2/15.2.1 Demolishing cement concrete including disposal of material within 50 metre lead:1:3:6 or richer mix 578.3 Rupees five hundred seventy eight and thirty paisa only. cum

3/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred thirty three and ten paisa only. sqm

4/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4530.3 Rupees four thousand five hundred thrity and thirty paisa only. cum

5/5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four and seventy paisa only. kg

6/5.9.5 Centring and shuttering including strutting,propping etc. And removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 261.7 Rupees two hundred sixty one and seventy paisa only. sqm

7/13.11.4 52 mm thick cement concrete flooring with metallic concrete hardener topping under layer 40 mm thick cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick metallic concrete hardener consisting of mix 1:2 (1 cement hardener mix:2 stone aggregate 6 mm nominal size) by volume @ 2 liter per 50 kg of cement or as per manufacture specification. This includes cost of cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 101.2 Rupees one hundred one and twenty paisa only. sqm

8/13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT 159 Rupees one hundred fifty nine only. sqm

CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement

9/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. kg

10/2414+16% Providing Pannel Shutter in Frame do all complete job of E/I. 844.93 Rupees eight hundred forty four and ninty three paisa only. sqm

11/21.1.1.1 Providing and fixing aluminium work for doors, windows, 347.9 Rupees three hundred forty seven and ninty paisa only. kg

ventilators and partitions with extruded built up standard

tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

12/21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness 998.4 Rupees nine hundred ninty eight and forty paisa only. sqm

13/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

14/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/15.58 Providing sal ballah barricading with departmental sal ballah average 150 dia. And 2M long sal ballah post at interval of 2.5 M C/C fixed 0.5 M average below ground, packed with earth and Brick bats, well watered and rammed with three rows of average 100mm dia. Sal ballah horizontal runners fixed with iron spikes and wires, white washing one coat to exposed surface, dismantling the barricade after function, filling the holes, excluding carriage of sal ballah from and to godown up to 5K.M. lead, stacking them in countable stacks in godown including cost of all labour and materials and taxes all complete job as per specification and direction of E/l. 150.2 Rupees one hundred fifty and twenty paisa only. Per Mt

2/18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 95.2 Rupees ninty five and twenty paisa only. Mt

3/N.S Supply Fitting and Fixing steel Jali in Cunting Hall and other place. as per direction 60 Rupees sixty only. Per mt

4/N.S Labour Required for fitting Jali and cleaning etc. do all this complete job of E/I.

Carpenter 288.44 Rupees two hundred eighty eight and forty four paisa only. each

Helper 236.9 Rupees two hundred thirty six and ninty paisa only. each

5/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees two hundred four and forty paisa only. cum

6/286C+16% S/F brik bats filling for making ramps 1599.23 Rupees one thousand five hundred ninty nine and twenty three paisa only. Per Mt

7/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

8/ Hire Charges of Sal ballah post and Runnet with lead do all this complete job of E/I.

Post 122.4 Rupees one hundred twenty two and forty paisa only. each

Runner 117.46 Rupees one hundred seventeen and forty six paisa only. each

1/18.42.1 Boring with 100 mm diameter casing pipe for hand pump / tubewell, inall soils except ordinary hard rocks requiring blasting, includingremoving the casing pipe after the hand pump / tube well is loweredand tested Up to 6 metres depth. 239.8 Rupees Two hundred thirty nine and eighty paisa. Metre

18.42.2 Beyond 6 m and up to 12 m depth 285.3 Rupees Two hundred eighty five and thirty paisa. Metre

18.42.3 Beyond 12 m and up to 18 m depth 333 Rupees Three hundred Thirty three. Metre

2/18.43 Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. 581.7 Rupees five hundred eighty one and seventy paisa. Metre

3/18.44 Providing and fixing to filter and lowering to proper levels 40 mm G.I.pipe for tube well including cleaning and priming the tube well. 306.3 Rupees three hundred six and thirty paisa. Metre

4/18.45 Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. 912.3 Rupees Nine hundred twelve and thirty paisa. Each

5/18.19.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : Horizontal 430.8 Rupees four hundred thirty and eighty paisa. Each

6/ Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

18.7.3 25 mm nominal outer dia Pipes 206.8 Rupees two hundred six and eighty paisa. Metre

18.7.1 15 mm nominal outer dia Pipes 138.7 Rupees one hundred thirty eight and seventy paisa. Metre

7/18.48 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. 6.6 Rupees Six and sixty paisa. Per Liter

8/18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 449.5 Rupees Four hundred fourty nine and fifty paisa. Each

9/17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap each 1604.90 1604.9 Rupees One thousand six hundred four and ninty paisa. Each

10/17.10.2.3 Kitchen sink without drain board 470x420 mm bowl depth 178 mm 3093.6 Rupees three thousand ninty three and sixty paisa. Metre

11/18.15/16 Providing and fixing brass bib cock of approved qualityProviding and fixing brass stop cock of approved quality : 273 Rupees two hundred seventy three. Each

12/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) :

18.46.1 15 mm nominal bore 134 Rupees one hundred thirty four paisa. Each

18.46.3 25 mm nominal bore 170.6 Rupees one hundred seventy and sixty paisa. Each

13/12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf persqm) rain water pipes conforming to IS :4985 including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 212.4 Rupees two hundred twelve and forty paisa. Metre

14/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

A Door Bend. 110 mm bend 168.3 Rupees one hundred sixty eight and thirty paisa. Each

B Plain Bend. 110 mm bend 168.3 Rupees one hundred sixty eight and thirty paisa. Each

C Single tee without door 306.1 Rupees three hundred six and ten paisa. Each

15/12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 144.49 Rupees one hundred forty four and forty nine paisa. Each

16/19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4147.30 4147.3 Rupees four thousand one hundred forty seven and thirty paisa. Each

17/19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe 329.4 Rupees three hundred twenty nine and forty paisa. Metre

18/17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm 1292.2 Rupees one thousand two hundred ninty two and twenty paisa. Each

19/15.2.1 Demolishing cement concrete including disposal of material within 50 metre lead: 1:3:6 or richer mix 578.3 Rupees five hundred seventy eight and thirty paisa. Metre

20/19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 28775.5 Rupees twenty eight thousand seven hundred seventy five and fifty paisa. Each

21/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees twelve and eighty paisa. Metre

22/15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: 839 Rupees eight hundred thirty nine. Cum

23/6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floorV cum 5003.9 Rupees five thousand three and ninty paisa. Cum

24/5.3+5.33B.4 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing M-15grade R.C.C instead of M-20 grade R.C.C. 5124.9 Rupees five thousand one hundred twenty four and ninty paisa. Cum

25/5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 291 Rupees two hundred ninty one. Sqm

26/5.22 Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 56 Rupees fifty six. Kg

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four. Kg

27/13.24.2 6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand) 87.4 Rupees eighty sevenand forty paisa. Sqm

28/13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa. Sqm

29/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa. Sqm

30/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 799.4 Rupees seven hundred ninty nine and forty paisa. Sqm

15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

31/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per 253.8 Rupees two hundred fifty three and eighty paisa. Sqm

building specification and direction of E/l,

32/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) 3323.1 Rupees three thousand three hundred thirty three and ten paisa. Cum

33/13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine. Sqm

34/10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete 2843 Rupees two thousand eight hundred forty three. Sqm

blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except Doors.

35/9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separately). Local wood 47639.7 Rupees forty seven thousand six hundred thirty nine and seventy paisa. Cum

36/13.74 Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratchesetc. complete 4.6 Rupees four and sixty paisa. Sqm

37/13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) 22 Rupees twenty two. Sqm

38/13.79.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 42.8 Rupees forty two and eigty paisa. Sqm

39/13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 40.7 Rupees forty and seventy paisa. Sqm

40/12.1.5 Providing corrugated G.S. sheet roofing fixed with G.I.J. or hooks, bolts and nuts 8 mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto a 618.8 Rupees six hundred eighteen and eighty paisa. Sqm

pitch of 60°) excluding the cost or purlins, rafters and trusses. 0.63 mm thick with zinc coating not less than 275 gm/m2

41/15.28.1 Dismantling roofing including ridges, hips valleys and guttersetc. and stacking the material within 50 metres lead of: G.S. Sheet 40.2 Rupees forty and twenty paisa. Sqm

42/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground 171 Rupees one hundred seventy one. Sqm

within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand)

43/22.9.2 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as lOOmicron HMHDPE film sandwitched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat which shall be paid for separately as per DSR Item No. 12.19. 313.5 Rupees three hundred thirteen and fifty paisa. Sqm

44/13.13.1 20 mm cement plaster of mix ; 1:3 (1 cement: 3 coarse sand) 182.3 Rupees one hundred eighty two and thirty paisa. Sqm

45/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa. Sqm

46 Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

47 Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

Non Shedule Item:-

-1 Providing and fixing 1H.P. Crompton Moter with Sumersebal Pump item all complete job E/I. 8500 Rupees eight thousand five hundred. Each

-2 Zaky down single layer area with all complete job E/I. 6.73 Rupees six and seventy three paisa. Sqm

-3 Leak Repair to C.A. & G.C.I. Sheet all complete job E/I. 13.3 Rupees thirteen and thirty paisa. Sqm

-4 Rel. area with all complete job E/I. 26.83 Rupees thirty six and eighty three paisa. Sqm

1/15.7.4 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead: In cement mortar 491.3 Rupees four hundred ninty one and thirty paisa only. cum

2/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. kg

3/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa only. sqm

4/5.3+5.33.B4 Reinforced cement conrete work in eams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using ementcontent as per approved design ix,including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to ccelerate,reinforcement,durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. 5124.9 Rupees five thousand one hundred twenty four and ninty paisa only. cum

5/5.22 Extra for marking of structural steel work required to be reerected.

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four and seventy paisa only. kg

6/5.9.3 Centring and shuttering including trutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 291 Rupees two hundred ninty one only. sqm

7/21.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 347.9 Rupees three hundred fourty seven and ninty paisa only. kg

8/21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 395 Rupees three hundred ninty five only. kg

9/Supply 2631 S/F/F 4 mm thick A.C.P do all this complete job of E/I. 1435.97 Rupees one thousand four hundred thirty five and ninty seven paisa only. sqm

10/21.32 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness 998.4 Rupees nine hundred ninty eight and fourty paisa only. sqm

11/21.16.1 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge Anodized (AC 15 ) aluminium 63.9 Rupees sixty three and ninty paisa only. each

12/11.23.2 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: 1456.7 Rupees one thousand four hundred fifty six and seventy paisa only. sqm

13/9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x10 mm 182 Rupees one hundred eighty two only. each

14/9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm 64.7 Rupees sixty four and seventy paisa only. each

15/9.74.4 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 100x10mm 129.7 Rupees one hundred twenty nine and seventy paisa only. each

16/6.1.12A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor 5237.7 Rupees five thousand two hundred thirty seven and seventy paisa only. sqm

17/11.24 Extra for nosing in marble stone for treads 185.8 Rupees one hundred eighty five and eighty paisa only. sqm

18/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. sqm

19/11.73 Providing designation 100 A one brick on edge soling joints filled withlocal sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 407 Rupees four hundred seven only. sqm

20/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. sqm

21/11.20.1 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1cement:4 coarse sand) Light shade using white cement 1043.2 Rupees one thousand fourty three and twenty paisa only. sqm

22/10.16.1 Hot finished welded type tubes Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, welded and bolted including special shaped washers etc. complete: 92.3 Rupees ninty two and thirty paisa only. kg

23/Supply 2712 Supplying P.V.C Sheet 2mm thick greel colour do all this complete job of E/I. 785.85 Rupees seven hundred eighty five and eighty five paisa only. sqm

24/ Labour charge for F & F P.V.C. Sheet do all this complete job of E/I. 76 Rupees seventy six only. sqm

25/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 2970 Rupees two thousand nine hundred seventy only. each

26/17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm 2859 Rupees two thousand eight hundred fifty nine only. each

sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 2859.90

27/17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap each 1818.5 Rupees one thousand eight hundred eighteen and fifty paisa only. each

28/17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 690.7 Rupees six hundred ninty and seventy paisa only. each

29/17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 191 Rupees one hundred ninty one only. each

30/17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms 377.6 Rupees three hundred seventy seven and sixty paisa only. each

31/8.6 Mirror polishing on marble work/stone work where ever required to give high gloss finish complete. 155.2 Rupees one hundred fifty five and twenty paisa only. sqm

32/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one only. sqm

33/13.74 Removing white or colour wash by scrapping and sand paper in andpreparing the surface smooth including necessary repair scratcheetc. complete 4.6 Rupees four and sixty paisa only. sqm

34/13.80.A2 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 118.4 Rupees one hundred eighteen and fourty paisa only. sqm

35/13.78.2+13.77.3 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 50.1 Rupees fifty and ten paisa only. sqm

36/13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old wood work (one more coats) 40.4 Rupees fouryt and fourty paisa only. sqm

37/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

38/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/6.1.12/1+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor 5237.7 Rupees five thousand two hundred thirty seven and seventy paisa only. m3

2/13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa only. m2

13.78.1+13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade old work (One or more coats) 90.1 Rupees ninty and ten paisa only. m2

4/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. m2

5/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa only. m2

6/6.1.12/1+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor 5237.7 Rupees five thousand two hundred thirty seven and seventy paisa only. m3

7/13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa only. m2

8/5.3+5.33.B4 Reinforced cement conrete work in eams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using ementcontent as per approved design ix,including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to ccelerate,reinforcement,durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. 5124.9 Rupees five thousand one hundred twenty four and ninty paisa only. m3

9/5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-8mm dia. 56 Rupees fifty six only. kg

10/5.9.3 Suspended floors, roots, landings, balcnies and access platform. 291 Rupees two hundred ninty one only. m2

11/15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 18.4 Rupees eighteen and fourty paisa only. m2

12/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees twelve and eighty paisa only. m2

13/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. m3

14/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 799.4 Rupees seven hundred ninty nine and forty paisa only. m2

15/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. m2

16/13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine only. m2

17/9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Local wood 47639.7 Rupees fourty seven thousand six hundred thirty nine and seventy paisa only. m3

18/9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. 30 mm thick 1363.1 Rupees one thousand three hundred sixty three and ten paisa only. m2

19/9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x10 mm 182 Rupees one hundred eighty two only. each

20/9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm 64.7 Rupees sixty four and seventy paisa only. each

21/9.100.2 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 100 mm 54.6 Rupees fifty four and sixty paisa only. each

22/13.78.1+13.79.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: 13.78.1 Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 69.7 Rupees sixty nine and seventy paisa only. m2

23/13.77.3+13.78.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade Old work (one or more coats) 50.1 Rupees fifty and ten paisa only. m2

24/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees fourty and seventy paisa only. m2

25/13.82.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old wood work (one more coats) 40.7 Rupees fourty and seventy paisa only. m2

26/14.1.2 Repairs to plaster of thickness 12 mm to 20mm in patches of area2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete cluding disposal of rubbish to the dumping ground within 50 metres lead. 171 Rupees one hundred seventy one only. m2

27 Carriage of Materials:-

(A) Brick 531.02 Rupees five hundred thirty one and two paisa only. Nos

(B) Stone sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa only. m3

(C) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa only. m3

28 Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa only. Bag

(B) Brick 370.75 Rupees three hundred seventy and seventy five paisa only. Nos

1/18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, inall soils except ordinary hard rocks requiring blasting, includingremoving the casing pipe after the hand pump / tube well is loweredand tested.

18.42.1 Up to 6 metres depth. 239.8 Rupees Two hundred thirty nine and eighty paisa only. Per Metre

18.42.2 Beyond 6 m and up to 12 m depth 285.3 Rupees Two hundred eighty five and thirty paisa only. Per Metre

18.42.3 Beyond 12 m and up to 18 m depth 333 Rupees Three hundred Thirty three only . Per Metre

2/24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc.

all complete, for all depths,as per direction of Engineer -incharge. 100 mm nominal size dia

(A) 24.3.1 100 mm nominal size dia 444.2 Rupees four hundred fourty fuor and twenty paisa only. Per Metre

Supply (B) 8641 50 mm dia 362.58 Rupees three hundred sixty two and fifty eight paisa only. Per Metre

Supply (C) 8640 40 mm dia (submerciable) 223.58 Rupees two hundred twenty three and fifty eight paisa only. Per Metre

3/24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 100 mm dia 166.6 Rupees one hundred sixty six and sixty paisa only. Metre

4/24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm clamp 974.6 Rupees nine hundred seventy four and sixty paisa only. each

5/24.15.1 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia 205.6 Rupees two hundred five and sixty paisa only. each

6/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil. 230.5 Rupees two hundred thirty and fifty paisa only. Per m3

7/24.12 Development of tube well in accordance with IS : 2800 (partI) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 649.4 Rupees six hundred fourty nine and fourty paisa only. Hour

8/18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Water Tank) 6.6 Rupees six and sixty paisa only. Per Lt.

9/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.4 32 mm nominal outer dia Pipes 249.1 Rupees two hundred fourty nine and ten paisa only. Metre

18.9.3 25 mm nominal outer dia Pipes 193.6 Rupees one hundred ninty three and sixty paisa only. Metre

18.9.1 15 mm nominal outer dia pipe 126.6 Rupees one hundred twenty six and sixty paisa only. Metre

10/18.15.2 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 273 Rupees two hundred seventy only. each

11/18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. 526.7 Rupees five hundred twenty six and seventy paisa only. each

12/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees two hundred four and fourty paisa only. cum

13/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

14/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. cum

13/15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 18.4 Rupees eighteen and fourty paisa only. sqm

14/15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 12.8 Rupees twelve and eighty paisa only. cum

15/6.1.12/A Providing half brick masonry with bricks of class designation100A in cement mortar 1:3 (1 cement: 3 coarse sand ) in supersturcture for osing cavity 5 to 7.5 cm wide in cavity wallcomplete with 10cmm/11.4cm wide bitumen felt type 3 grade 1. 4724.4 Rupees four thousand seven hundred twenty four and fourty paisa only. cum

16/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 799.4 Rupees seven hundred ninty nine and fourty paisa only. sqm

17/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. sqm

18/11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 475.4 Rupees four hundred seventy five and fourty paisa only. sqm

19/11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm 1694.3 Rupees one thousand six hundred ninty four and thirty paisa only. sqm

20/11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 1403.6 Rupees one thousand four hundred three and sixty paisa only. sqm

21/9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Local wood 47639.7 Rupees fourty seven thousand six hundred thrity nine and seventy paisa only. cum

22/9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x10 mm 182 Rupees one hundred eighty two only. each

23/9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm 64.7 Rupees sixty four and seventy paisa only. each

24/9.100.2 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 100 mm 54.6 Rupees fifty four and sixty paisa only. each

25/13.78.1+13.79.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . Old work (one or more coats) Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 69.7 Rupees sixty nine and seventy paisa only. sqm

26/13.82.3/4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: Old steel work (one or more coats) 40.7 Rupees fourty and seventy paisa only. sqm

27/14.5.2 Renewing glass panes, with putty and nails wherever necessary: Float glass panes weighing 10 kg/m2 (4mm thick glass) 618.1 Rupees six hundred eighteen and ten paisa only. sqm

28/0L02 Supply Supply labour for site do all complete as per specification and direction of E/I. 236.9 Rupees two hundred thirty six and ninty paisa only. each

29/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one only. sqm

30/13.74 Removing white or colour wash by scrapping and sand paper in andpreparing the surface smooth including necessary repair scratcheetc. complete 4.6 Rupees four and sixty pasia only. sqm

31/9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. 30 mm thick 1363.1 Rupees one thousand three hundred sixty three and ten paisa only. sqm

32/11.3.1 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 245.7 Rupees two hundred fourty five and seventy paisa only. sqm

33/6.1.14A+6.3A Brick work with bricks of class designation 100A in foundations and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 5003.9 Rupees five thousand three and ninty paisa only. sqm

34/13.11.4 Cement plaster in course sand 1:6(1 cement: 6 coarse sand) 101.2 Rupees one hundred one and twenty paisa only. sqm

35/13.80.A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 77.4 Rupees seventy seven and fourty paisa only. sqm

36/13.79.1 Finishing walls with water proofing cement paint ofapproved brand and manufacture and of required shade to give an even shade 63.2 Rupees sixty three and twenty paisa only. sqm

37/15.2.1 Demolishing cement concrete including disposal of material within 50 metre lead:1:3:6 or richer mix 578.3 Rupees five hundred seventy eight and thirty paisa only. cum

38/17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 2093.5 Rupees two thousand ninty three and fifty paisa only. each

39/17.28.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings completeSemi rigid pipe 78.5 Rupees seventy eight and fifty paisa only. each

40/12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.78.2 110 mm diameter 212.4 Rupees two hundred twelve and fourty paisa only. metre

41/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.3.2 110x110x110mm 306.1 Rupees three hundred six and ten paisa only. each

12.79.4.2 110x110x110mm 257.3 Rupees two hundred fifty seven and thirty paisa only. each

42/12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 144.49 Rupees one hundred forty four and fourty nine paisa only. each

43/13.13.2 20 mm cement plaster of mix ; 1: 4(1 cement: 4 coarse sand) 161.3 Rupees one hundred sixty one and thirty paisa only. sqm

44/22.9.2 Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS: 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as lOOmicron HMHDPE film sandwitched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th, the top m ost layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat which shall be paid for 313.5 Rupees three hundred thirteen and fifty paisa only. sqm

45/13.12.1+13.36.3 (1 cement :3 coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix. Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 15 mm cement plaster 1:3(1 cement :3 sand) 157.6 Rupees one hundred fifty seven and sixty paisa only. sqm

46/17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm 1292.2 Rupees one thousand two hundred ninty two and twenty paisa only. each

47/17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings 859.1 Rupees eight hundred fifty nine and ten paisa only. each

and fixtures complete.10 litre capacity - White PVC Low Level Flushing

48/N.S Providing and fixing 2 H.P electric motor with starter do all this complete job of E/I. 25000 Rupees twenty five thousand only. each

49/ Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.85 Rupees one thousand four hundred twenty two and eighty five paisa. Per m3

(C) Local Sand 181.48 Rupees one hundred eighty one and fourty eighty paisa only. Per m3

(D) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

50/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 230.5 Rupees two hundred thirty and fifty paisa only. cum

2/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees two hundred four and forty paisa only. sqm

3/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

4/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. cum

5/6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 4724.4 Rupees four thousand seven hundred twenty four and forty paisa only. cum

6/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4530.3 Rupees four thousand five hundred thirty and thirty paisa only. cum

7/5.22.7B Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four and seventy paisa only. kg

8/5.9.1 Centring and shuttering including trutting, propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete 169 Rupees one hundred sixty nine only. sqm

5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 261.7 Rupees two hundred sixty one and seventy paia only. sqm

9/13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 159 Rupees one hundred fifty nine only. sqm

10/0287+16% Provinding brick bat qilling in soakpit do all complete as per building pecification and direction of E/l, 1599.23 Rupees one thousand five hundred ninty nine and thirty three paisa only. m3

11/0L01+16% Labour required for qilling brick bats and shiffing of cover sub on tank & soakpit 238.96 Rupees two hundred thirty eight and ninty six paisa only. each

12/ Provinding 60 x 60 x 75 mm brick masmmary chember do all complete as per building pecification and direction of E/l, 5807.5 Rupees five thousand eight hundred seven and fifty paisa only. each

13/19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe 329.4 Rupees three hundred twenty nine and forty paisa only. metre

14/15.2.1 Demolishing cement concrete including disposal of material within 50 metre lead:1:3:6 or richer mix 578.3 Rupees five hundred seventy eight and thirty paisa only. cum

15/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

16/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred twenty three and ten paisa only. cum

17/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and 799.4 Rupees seven hundred ninty nine and forty paisa only. sqm

matching pigment etc., complete.

18/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in- harge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. sqm

19/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls 171 Rupees one hundred seventy one only. sqm

complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand)

20/13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 69.1 Rupees sixty nine and ten paisa only. sqm

21/9.117.1 Providing and fixing factory made uPVC door frame made of uPV Cextruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge Extruded section profile size 48x40 mm 201 Rupees two hundred one only. metre

22/9.118.1 Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of 2731.9 Rupees two thousand seven hundred thirty one and ninty paisa only. sqm

styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

23/9.72.2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: 125x70x4 mm ordinary type) 93.4 Rupees ninty three and forty paisa only. each

24/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 3049.3 Rupees three thousand forty nine and thirty paisa only. each

25/12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.78.1 75 mm diameter 127.3 Rupees one hundred twenty seven and thirty paisa only. metre

12.78.2 110 mm diameter 212.4 Rupees two hundred twelve and forty paisa only. metre

26/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

A band 75mm 112.9 Rupees one hundred twelve and ninty paisa only. each

B Tee 75mm 196.8 Rupees one hundred ninty six and eighty paisa only. each

C band 110mm 168.3 Rupees one hundred sixty eight and thirty paisa only. each

D Tee 110mm 257.3 Rupees two hundred fifty seven and thirty paisa only. each

27/18.15 Providing and fixing brass bib cock of approved quality :15 mm nominal bore 273 Rupees two hundred seventy three only. each

28/18.16 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 273 Rupees two hundred seventy three only. each

29/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.3 25 mm 25 mm nominal outer dia Pipes 193.6 Rupees one hundred ninty three and sixty paisa only. metre

18.9.1 15 mm nominal outer dia Pipes 126.6 Rupees one hundred twenty six and sixty paisa only. metre

30/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

18.46.3 25 mm nominal bore 170.6 Rupees one hundred seventy and sixty paisa only. each

18.46.1 15 mm nominal bore 134 Rupees one hundred thrity four only. each

31 Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.82 Rupees one thousand four hundred twenty two and eighty two paisa. Per m3

(C) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

(D) Local Sand 181.48 one hundred eighty one and forty eight paisa only. Per m3

32 Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/0L01 Renewing Naria Tiles for Labour do all complete job of E/I. 236.9 Rupees two hundred thirty six and ninty paisa only. each

2/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 204.4 Rupees two hundred four and forty paisa only. cum

3/11.79.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern. 763.4 Rupees seven hundred sixty three and forty paisa only. sqm

4/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 253.8 Rupees two hundred fifty three and eighty paisa only. sqm

5/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 3323.1 Rupees three thousand three hundred thirty three and ten paisa only. sqm

6/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4530.3 Rupees four thousand five hundred thirty and thirty paisa only. cum

7/5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four and seventy paisa only. kg

8/5.9.5 Centring and shuttering including trutting, propping etc. and removal of form for Lintels, beams, plinth bams, griders, bressumers and contilevers. 261.7 Rupees two hundred sixty one and seventy paisa only. sqm

9/11.40 Providing and laying Ceramic glazed floor tiles 400x400 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 1264.9 Rupees one thousand two hundred sixty four and ninty paisa only. sqm

10/10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 623.9 Rupees six hundred twenty three and ninty paisa only. kg

11/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 86 Rupees eighty six only. kg

12/13.74 Removing white or colour wash by scrapping and sand paper in andpreparing the surface smooth including necessary repair scratcheetc. complete 4.6 Rupees four and sixty paisa only. sqm

13/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 171 Rupees one hundred seventy one only. sqm

14/13.80.A.1 Providing and applying white cement based putty of average thickness 1 mm, ofapproved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 77.4 Rupees seventy seven and forty paisa only. sqm

15/13.79.1 Finishing walls with water proofing cement paint ofapproved brand and manufacture and of required shade to give an even shade 63.2 Rupees sixty three and twenty paisa only. sqm

16/13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 63.6 Rupees sixty three and sixty paisa only. sqm

17//15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 18.4 Rupees eighteen and forty paisa only. sqm

18/8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 3539.5 Rupees three thousand five hundred thirty nine and fifty paisa only. sqm

cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

19/8.6 Mirror polishing on marble work/stone work where ever required to give high gloss finish complete. 155.2 Rupees one hundred fifty five and twenty paisa only. sqm

20/8.3 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per designapproved by Engineer-in-Charge. 182.1 Rupees one hundred eighty two and ten paisa only. metre

21/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 230.5 Rupees two hundred thirty and fifty paisa only. cum

22/4.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in propershape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping groundwithin 50 metres lead. 3741.8 Rupees three thousand seven hundred forty one and eighty paisa only. cum

23/6.1.12/1+6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor 5237.7 Rupees five thousand two hundred thirty seven and seventy paisa only. cum

46 Carriage of Materials:-

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa. Per m3

(B) Stone Chips 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

(C) Local Sand 181.48 Rupees one hundred eighty one and forty eight paisa only. Per m3

(D) Bricks 531.02 Rupees five hundred thirty one and 0 two paisa. P%0

47 Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa. Per Bag

(B) Bricks 370.75 Rupees three hundred seventy and seventy five paisa. P%0

1/13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete 5.9 Rupees five and ninty paisa only. sqm

2/14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4(1 cement:4 coarse sand) 114.7 Rupees one hundred fourteen and seventy paisa only. sqm

3/13.80A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 77.4 Rupees seventy seven and forty paisa only. sqm

4/9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. 30 mm thick 1363.1 Rupees one thousand three hundred sixty three and ten paisa only. sqm

5/9.1.3 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood. 49794.4 Rupees forty nine thousand seven hundred ninty four and forty paisa only. cum

6/13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade .New work (two or more coats ) over and including priming coat with cement primer 69.1 Rupees sixty nine and ten paisa only. sqm

7/13.78.1+13.79.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 69.7 Rupees sixty nine and seventy paisa only. sqm

8/9.46.2 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia metre 353.9 Rupees three hundred fifty three and ninty paisa only. metre

9/11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 1694.3 Rupees one thousand six hundred ninty four and thirty paisa only. sqm

10/11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 1403.6 Rupees one thousand four hundred three and sixty paisa only. sqm

11/15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead 18.4 Rupees eighteen and forty paisa only. sqm

12/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 766.3 Rupees seven hundred sixty six and thirty paisa only. sqm

13/11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness sqm 799.40 to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 799.4 Rupees seven hundred ninty nine and forty paisa only. sqm

14/21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 347.9 Rupees three hundred forty seven and ninty paisa only. kg

15/21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness 998.4 Rupees nine hundred ninty eight and forty paisa only. sqm

16/9.51.2 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with mild steel U beading 525.1 Rupees five hundred twenty five and ten paisa only. sqm

17/9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm 69.4 Rupees sixty nine and forty paisa only. each

18/9.97.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm 111.7 Rupees one hundred eleven and seventy paisa only. each

19/13.82.3 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Old steel work (one or more coats) 40.7 Rupees forty and seventy paisa only. sqm

20/18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 835.6 Rupees eight hundred thirty five and sixty paisa only. each

21/18.16.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore 273 Rupees two hundred seventy three only. each

22/17.28.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 78.5 Rupees seventy eight and fifty paisa only. each

23/18.17.1.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 449.5 Rupees four hundred forty nine and fifty paisa only. each

24/18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.1 15 mm nominal outer dia Pipes 126.6 Rupees one hundred twenty six and sixty paisa only. metre

18.9.2 25 mm nominal outer dia Pipes 147.3 Rupees one hundred forty seven and thirty paisa only. metre

25/18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

18.46.1 15 mm nominal bore 134 Rupees one hundred thirty four only. each

18.46.2 25 mm nominal bore 158.4 Rupees one hundred fifty eight and forty paisa only. each

26/17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 2970 Rupees two thousand nine hundred seventy only. each

27/17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever requiredProviding and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required 3049.3 Rupees three thousand forty nine and thirty paisa only. each

28/17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps 2093.5 Rupees two thousand ninty three and fifty paisa only. each

29/17.10.2.1 Kitchen sink without drain board 610x510 mm bowl depth 200 mm 4394 Rupees four thousand three hundred ninty four only. each

30/2480+16% PANELS Ply wood 5 ply with teak ply on both faces 9 mm thick 1243.26 Rupees one thousand two hundred forty three and twenty six paisa only. sqm

31/8.1.1.2 Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in c ement mortar 1:3 (1 cement :3 coarse sand) including pointing with white coment mortar 1:2(1 shite cement:2 marble dust) with an admixture of pigment to match the marble shade:(To be secured to the backing by means of cramps, which shall be paid for separately) Area of slab over 0.50 sqm 2337.2 Rupees two thousand three hundred thirty seven and twenty paisa only. sqm

32/12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diamete 212.4 Rupees two hundred twelve and forty paisa only. metre

33/12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm bend 168.3 Rupees one hundred sixty eight and thirty paisa only. each

34/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4530.5 Rupees four thousand five hundred thirty and fifty paisa only. cum

35.5.22.7B Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. 54.7 Rupees fifty four and seventy paisa only. kg

36/ Carriage of Materials:- Rupees

(A) Sone Sand 1395.42 Rupees one thousand three hundred ninty five and forty two paisa only. Per m3

(B) Stone Chips 1422.85 Rupees one thousand four hundred twenty two and eighty five paisa only. Per m3

37/ Extra Cost of Materials

(A) Cement 15.95 Rupees fifteen and ninty five paisa only. Per Bag

38/10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except Doors 2843 Rupees two thousand eight hundred forty three only. sqm

9/21.15.1 Anodized (AC 15) aluminiumProviding and fixing aluminium casement windows fastener of requiredlength for aluminium windows with necessary screws etc. complete. 52.9 Rupees fifty two and ninty paisa only. each

1/2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplusx cavated soil as directed, within a lead of 50 m. All Kinds of soil 588.12 230.5 Rupees two hundred thirty and fifty paisa only. sqm

2/2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 148.288 204.4 Rupees two hundred four and forty paisa only. cum

3/11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per 567.059 253.8 Rupees two hundred fifty three and eighty paisa. Sqm

building specification and direction of E/l,

4/4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) 50.991 3850.5 Rupees three thousand eight hundred fifty and fifty paisa only. Cum

5/5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS:9103 to accelerate,reinforcement,durability as per direction of Engineer-incharge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All works up to plinth level 159.403 4621.5 Rupees four thousand six hundred twenty one and fifty paisa only. cum

6/5.33.2 All work above Plinth level upto floor V Level. 196.45 5102.3 Rupees five thousand one hundred two and thirty paisa only. cum

7/5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 128.62 169 Rupees one hundred sixty nine only. sqm

5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts 483.56 357.6 Rupees three hundred fifty seven and sixty paisa only. sqm

5.9.20 Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick. 617.89 392.7 Rupees three hundred ninty two and seventy paisa only. sqm

5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. 532.71 371.8 Rupees three hundred seventy one and eighty paisa only. sqm

5.9.19 Weather shade,Chajjas, corbels etc. including edges 94.028 395.6 Rupees three hundred ninty five and sixty paisa only. sqm

5.9.7 Stairs,(excluding landings) except spiral-staircaces. 45.025 328.9 Rupees three hundred twenty eight and ninty paisa only. sqm

5.9.16.1 Edges of slabs and breaks in floors and walis-Under 20 cms wide 444 83.5 Rupees eighty three and fifty paisa only. Metre

8/5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 10700 56 Rupees fifty six. Kg

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 5391 54.7 Rupees fifty four. Kg

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 7600 53.4 Rupees fifty three and fourty paisa only. kg

5.22.7D Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. 8400 54.4 Rupees fifty four and forty paisa only. kg

5.22.7E Thermo-Mechanically Treated bars TMT Fe-500-20mm dia. 3600 53.6 Rupees fifty three and sixty paisa only. kg

9/6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 23.517 4706 Rupees four thousand seven hundred six only. cum

10/6.1.14C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 129.962 5219.3 Rupees five thousand two hundred ninteen and thirty paisa only. cum

11/13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 850.97 87.4 Rupees Eighty Seven and Paisa Forty only Sqm

12/13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 1427 101.2 Rupees one hundred one and twenty paisa. Sqm

13/13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 739.61 117.1 Rupees one hundred seventeen and ten paisa only. Sqm

14/13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 80.29 159 Rupees one hundred fifty nine. Sqm

15/2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 295.14 74.5 Rupees seventy four and fifty paisa only. Sqm

16/2.27.1 Extra for every additional lift of 1.5 m or part thereof in :Ali kinds of soil. 191.34 29.2 Rupees twenty nine and twenty paisa only. Sqm

17/2.35.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos /Lindone emulsifiable concentrate of 20% 375 195.4 Rupees one hundred ninty five and fourty paisa only. Litre

18/2.37.3.1 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor With Chlorpyriphos EC 20% with 1% concentration 190 186.7 Rupees one hundred eighty six and seventy paisa only. Sqm

19/6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) 106.89 55.4 Rupees fifty five and fourty paisa only. Sqm

20/9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including stainless steel butt hinges with necessary screws. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to I.S. 2202 (part I). On one side only 38.11 2369.6 Rupees two thousand three hundred sixty nine and sixty paisa only. Sqm

21/9.26 Extra for cutting rebate in flush door shutters (total area of the shutter to be measured) 38.11 103.8 Rupees one hundred three and eighty paisa only. Sqm

22/9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 2177.4 86 Rupees eighty six only. kg

23/10.5 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 20.4 4248.2 Rupees four thousand two hundred fourty eight and twenty paisa only. Sqm

24/21.1.1.3 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 960 386.4 Rupees three hundred eighty six and fourty paisa only. kg

25/21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness 76.76 998.4 Rupees Nine hundred Ninety eighty and Paisa forty only Sqm

26/10.15.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by . mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: botile -B 97.8 365.1 Rupees three hundred sixty five and ten paisa only. Metre

27/10.17 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 40 124.5 Rupees twenty four and fifty paisa only. each

28/10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainsmembers shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 90 623.9 Rupees six hundred twenty three and ninty paisa only. kg

29/11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 362.38 766.3 Rupees seven hundred sixty six and thirty paisa. Sqm

30/11.40 Providing and laying Ceramic glazed floor tiles 400x400 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 88.7 1264.9 Rupees one thousand two hundred sixty four and ninty paisa only. sqm

31/11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.Size of Tile 60x60 cm 382.67 1694.3 Rupees one thousand six hundred ninty four and thirty paisa only. sqm

32/11.23.5 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: Udaipur green marble 41.97 1512.9 Rupees one thousand five hundred twelve and ninty paisa only. sqm

33/11.22 Tile work in skirting, risers of steps and dado(upto 2m height) over 12 mm thick bed of cement mortar 1:3(1 cement;3 coarse sand) and jointed with grey cement slurry© 3.3 kg/sqm including pointing in .white cement mixed with pigment of matching shade complete. 12.6 1098.8 Rupees one thousand ninty eight and eighty paisa only. sqm

34/11.24 Extra for nosing in marble stone for treads 60 185.8 Rupees one hundred eighty five and eighty paisa only. sqm

35/12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 14 150.1 Rupees one hundred fifty and ten paisa only. each

36/13.40A Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 3182.99 81.1 Rupees eighty one and ten paisa only. sqm

37/13.77.2+13.78+2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 2443.38 97.2 Rupees ninty seven and twenty paisa only. sqm

38/13.45 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 905.61 122.6 Rupees One hundred Twenty two and Paisa Sixty only Sqm

39/13.81.3 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works85.74 75.55 22.8 Rupeees twenty two and eighty paisa only. Sqm

40/13.81.1 Applying p255.73riming coat: With ready mixed pink or grey pr275.00imer of approved brand and manufacture on wood 33.75work (hard and softwood) 85.74 26.7 Rupees twenty six and seventy paisa only. Sqm

41/13.94.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary pain+ of approved brand and manufacture 255.73 75.2 Rupees seventy five and twenty paisa only. Sqm

42/13.12.2+13.36.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:4(1 cement: 4 coarse sand ) Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 15 mm cement plaster 1:4(1 cement :4 sand) 275 139.8 Rupees one hundred thirty nine and eighty paisa only. Sqm

43/15.2.1 Demolishing cement concrete including disposal of material within 50 metre lead: 1:3:6 or richer mix 33.75 578.3 Rupees five hundred seventy eight and thirty paisa. Metre

44/ Sone Sand 284.844 1395.42 Rupees one thousand three hundred ninty five and fourty two paisa. Per m3

Stone Chips 352.89 1422.8 Rupees one thousand four hundred twenty two and eighty paisa. Per m3

Local Sand 156.9 181.47 Rupees one hundred eighty one and fourty seven paisa only. per m3

Bricks 97823 531.01 Rupees five hundred thirty one and 0 one paisa only. P%0

45/ Extra Cost of Materials

Cement 3965 15.81 Rupees fifteen and eighty one paisa only. Per Bag

46/21.12.1 Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar 3 484 Rupees four hundred eighty four only. each

47/21.16.3 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge Polyester powder coated minimum thickness 50 micron aluminium 26 76.1 Rupees seventy six and ten paisa only. sqm

48/9.142.2 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm,out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel,all complete as per manufacturer’s specification and direction of Engineer-in-charge. 12.6 3220.8 Rupees three thousand two hundred twenty two and eighty paisa only. sqm

49/9.143 Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and 70.00jointed with plastic brackets and stainless steel12.00 screws, reinforcing hinge side vertical of the frame10.00s with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineerin- charge. 45.6 420.8 Rupees four hundred twenty and eighty paisa only. metre

50/9.100.3 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 75 mm 70 46.3 Rupees fourty six and thrity paisa only. each

51/9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper. 12 83.8 Rupees eighty three and eighty paisa only. each

52/9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 10 1064.7 Rupees one thousand sixty four and seventy paisa only. each

53/9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete 10 766.9 Rupees seven hundred sixty six and ninty paisa only. each

54/9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:

9.97.1 300x10 mm 19 111.7 Rupees one hundred eleven and seventy paisa only. each

9.97.4 150x10mm 70 64.7 Rupees sixty four and seventy paisa only. each

55/9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:

9.99.1 300x16mm 8 218.7 Rupees two hundred eighteen and seventy paisa only. each

9.96.2 250x10 mm 6 182 Rupees one hundred eighty two only. each

56/9.95 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

9.95.1 125x75x4 mm 42 106.4 Rupees one hundred six and fourty paisa only. each

9.95.6 75x63x4 mm 80 79.5 Rupees seventy nine and fifty paisa only. each

57/12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf persqm) rain water pipes conforming to IS :4985 including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 105.6 212.4 Rupees two hundred twelve and forty paisa. Metre

58/12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.1.2 (1) Coupler = 110 mm = 28 No.@Rs. 140.20= Rs.3926.00 28 140.2 Rupees one hundred fourty and twenty paisa only. each

12.79.5.2 (2) Bend = 110 mm = 06 [email protected] =Rs. 6 168.3 Rupees one hundred sixty eight and thirty paisa only. each

12.79.6.2 (3) Shoes = 110mm = 16 [email protected]=Rs. 16 305.2 Rupees three hundred five and twenty paisa only. each

12.80.2 (4) Pipe clip = 110mm = 60 [email protected]=Rs. 60 144.49 Rupees one hundred fourty four and fourty nine paisa only. each

59/12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 16 39.1 Rupees thirty nine and ten paisa only. each

Construction of Septic Tank and Soakpit Sanitary Installation Works of D.M. Meeting Hall Muzaffarpur.

60/6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 8.97 4724.4 Rupees four thousand seven hundred twenty four and fourty paisa only. cum

61/5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 1.139 4530.3 Rupees four thousand five hundred thirty and thirty paisa only. cum

62 Supply Building bricks bats billing in Soackpit do all this complete works. 1.479 1585.44 Rupees one thousand five hundred eighty five and fourty four paisa only. sqm

63 Labour required bk bats billing do all this complete job 2 238.96 Rupees two hundred thirty eight and ninty six paisa only. each

64 Providing and laying non preasure NP2 Class 15mm dia R.C.C. Pipe do all this complete job 15 329.4 Rupees three hundred twenty nine and fourty paisa only. each

65/19.7.1.1 Inside size 90x80 cm and 45 cm deep including C.I. coverwith frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2 6958.9 Rupees six thousand nine hundred fifty eight and ninty paisa only. each

66/18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

18.8.1 15 mm nominal outer dia Pipes 50 221.4 Rupees two hundred twenty one and forty paisa only. metre

18.8.3 25 mm nominal outer dia Pipes 30 306.9 Rupees three hundred six and ninty paisa only. metre

18.8.4 32 mm nominal outer dia Pipes 70 381.6 Rupees three hundred eighty one and sixty paisa only. metre

67/18.46 Providing and fixing G.I. Union in G.I. pipe including utting and threading the pipe and making long screws etc. complete (New work) :

18.8.1 15 mm nominal outer dia Pipes 40 134 Rupees one hundred thirty four only. each

18.8.3 25 mm nominal outer dia Pipes 25 170.6 Rupees one hundred seventy and sixty paisa only. each

18.8.4 32 mm nominal outer dia Pipes 30 213.3 Rupees two hundred thirteen and thirty paisa only. each

68/18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore 1 469.4 Rupees four hundred sixty nine and fourty paisa only. each

69/18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. 2 525.7 Rupees five hundred twenty five and seventy paisa only. each

70/18.48 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. 1000 6.6 Rupees Six and sixty paisa only. Per Liter

Supply Assembling lowering 100mm boring with 1HP Submersiable Boring for D.M. Meeting Hall Muzaffarpur

71/18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, inall soils except ordinary hard rocks requiring blasting, includingremoving the casing pipe after the hand pump / tube well is loweredand tested

18.42.1 Up to 6 metres depth. 6 239.8 Rupees Two hundred thirty nine and eighty paisa only Metre

18.42.2 Beyond 6 m and up to 12 m depth 6 285.3 Rupees Two hundred eighty five and thirty paisa only. Metre

18.42.3 Beyond 12 m and up to 18 m depth 88 333 Rupees Three hundred Thirty three paisa only. Metre

72/24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -incharge.

24.3.1 100 mm nominal size dia 60 444.2 Rupees Four hundred Fourty four and Paisa Twenty only Meter

24.3.4 50 mm nominal size dia 40 190.1 Rupees one hundred ninty and ten paisa only. Meter

8640 40 mm nominal size dia 25 192.43 Rupees one hundred ninty two and fourty three paisa only. Meter

73/24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 1 974.6 Rupees Nine hundred Seventy four and Paisa Sixty only Each

74/24.15.1 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 1 205.6 Rupees Two hundred Five and Paisa Sixty only Each

75/24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 1 166.6 Rupees one hundred Sixty six and Paisa Sixty only Each

76/24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 8 649.4 Rupees Six hundred fourty nine and Paisa forty only Each

BUILDING DIVISION MUZAFFARPUR

BILL OF QUANTITY

NAME OF WORK:- CONSTRUCTION OF ONE NO. PANCHAYAT SARKAR BHAWAN AT EACH PANCHAYAT (BHALURA SIMTOKA PANCHAYAT AND RAMPUR SHANBHUTA PANCHAYAT) AT AURAI BLOCK IN MUZAFFARPUR DISTRICT FOR THE YEAR - 2025-26 (ELECTRIFICATION INCLUDED)

Estimated cost- 4,95,84,368.00 Last Date of Sale of B.O.Q-

Cost of B.O.Q - 10,000.00 Date of Tender -

Earnest Money Amount-9,91,700.00 Time of Completion -12 Months

Sl.No. Code ITEM OF WORK QUANTITY UNIT RATE Amount

1 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. AH Kinds of soil 1747.060 CUM 314.90 550149

2 2.3.1-2.4 Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering .rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up ; in mbankments for roads, flood banks, marginal banks, and guide banks etc . lead upto 50 m and lift upto 1.5 m All Kinds of soil Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth. 454.900 CUM 342.50 155803

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 1034.600 CUM 123.90 128187

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 3848.740 CUM 287.30 1105743

5 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 196.020 CUM 3998.10 783708

6 4.12 Extra for providing and mixing water prooding material in cement concrete work in the proportion recommended by the manufacturers. 1152.000 PER 50 KG CEMENT 57.16 65848

7 5.9.1 Centring and shuttering including strutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete. 532.000 SQM 211.60 112571

8 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 1510.000 SQM 437.50 660625

9 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 1788.000 SQM 404.70 723604

10 5.9.6 Centring and shuttering including trutting,propping etc. and removal of form for. Columns,Pillars, Piers, butmentsPosts and Struts 1240.000 SQM 494.40 613056

11 5.9.7 Centring and shuttering including strutting,propping etc. And removal of form for Stairs,(excluding landings) except spiral-staircaces. 25.920 SQM 439.90 11402

12 5.9.13 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards 44.000 SQM 646.70 28455

13 5.9.19 Centring and shuttering including strutting,propping etc. and removal of form for. Weather shade,Chajjas, corbels etc. including edges 54.500 SQM 550.90 30024

14 5.9.16.1 Centring and shuttering including strutting,propping etc. and removal ofform for. Edges of slabs and breaks in floors and walis-Under 20 cms wide 382.000 SQM 130.20 49736

15 5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-8mm dia.. 51678.540 KG 94.50 4883622

5.22.7B Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia. 6767.880 KG 92.60 626706

5.22.7C Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-12mm dia. 12919.640 KG 90.80 1173103

5.22.7D Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. 32299.080 KG 91.70 2961826

5.22.7E Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. hermo-Mechanically Treated bars TMTC-500-20mm dia. 23255.340 KG 91.70 2132515

5.22.7F Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMT Fe-500-25rnm dia. 2583.920 KG 91.70 236945

16 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 522.000 CUM 5063.40 2643095

17 5.33.2.1 All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum 510.800 CUM 5863.20 2994923

18 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 604.000 CUM 4923.00 2973492

19 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 156.760 CUM 4923.00 771729

20 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum 604.000 CUM 842.20 508689

21 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws 160.000 SQM 1775.30 284048

22 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300x16 mm 70.000 EACH 235.50 16485

23 9.97.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 300x10 mm 140.000 EACH 111.40 15596

24 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. 70.000 EACH 78.40 5488

25 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm 140.000 EACH 57.10 7994

26 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete Twin rubber stopper. 70.000 EACH 60.80 4256

27 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) 160.000 SQM 401.40 64224

28 9.40.1.2 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 50x20mm 302.000 METRE 184.60 55749

29 10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. 172.800 SQM 3038.90 525122

30 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb 302.000 METRE 432.60 130645

31 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 96.000 EACH 165.40 15878

32 10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position andapplying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works. 1714.000 SQM 114.60 196424

33 9.48.1 Fixed to steel windows by welding Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 3096.000 KG 144.50 447372

34 10.33.1 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer MS tube (medium) 40mm nominal bore 324.000 KG 121.90 39496

35 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 26.600 sQM 6303.40 167670

36 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of atering, taxes, royalty all complete as per building pecification and direction of E/l, 2182.000 SQM 283.30 618161

37 11.73 Providing designation 100 A one brick on edge soling joints filled withlocal sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 280.000 SQM 444.80 124544

38 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting Size of Tile 60x60 cm 816.000 SQM 1638.80 1337261

39 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement :3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 54.000 SQM 1191.80 64357

40 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 11.26.1 20 to 25 mm thick - 955.760 SQM 1252.70 1197281

41 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 46.000 SQM 1334.90 61405

42 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 56.000 SQM 686.80 38461

43 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 216.000 SQM 795.00 171720

44 11.20.2 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) Medium shade using 50% white cement 50% grey cement 62.060 sQM 953.10 59149

45 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 2872.000 SQM 141.50 406388

46 13.17.1 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 288.680 SQM 203.60 58775

47 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 3408.000 SQM 162.80 554822

48 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 1510.000 SQM 125.60 189656

49 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 7790.000 SQM 105.40 821066

50 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer 4382.000 SQM 102.30 448279

51 13.81.1 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 320.000 SQM 39.70 12704

52 13.81.3 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 344.000 SQM 34.60 11902

53 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work 664.000 SQM 84.50 56108

54 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 602.000 METRE 47.10 28354

55 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/ 10 sqmover and including priming coat of exterior primer pplied@ 2.20 kg/ 10 sqm) 3408.000 SQM 137.00 466896

56 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommend ed proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 98.000 SQM 480.60 47099

22.8.1 With average thickness of 120 mm and minimum thickness at khurras point to be 65 .. 1336.000 CUM 850.70 1136535

57 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 162.000 SQM 436.60 70729

58 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 24.000 EACH 189.40 4546

59 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil. 1112.800 100sqm 1355.40 15083

60 2.32 Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 1112.800 100sqm 697.40 7761

61 Carriage of Materials.

(A) Sone Sand (Lead 120/km) 910.120 CUM 2653.10 2414639

(B) Stone Chips Lead (Railway yard + 10/km) 1065.060 CUM 2012.09 2142997

(C) Local Sand 03/km (1k+2P) 3888.980 CUM 310.46 1207373

62 Different in Cost of Material

63 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

18.7.1 15 mm nominal outer dia Pipes 150.000 metre 172.00 25800

18.7.2 20 mm nominal outer dia Pipes 112.000 metre 233.90 26197

18.7.3 25 mm nominal outer dia Pipes 150.000 metre 317.30 47595

18.7.4 32 mm nominal outer dia Pipes 168.000 metre 395.20 66394

18.7.5 40 mm nominal outer dia Pipes 84.000 metre 538.40 45226

64 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia Pipes 170.000 METRE 278.20 47294

18.8.2 20 mm nominal outer dia Pipes 100.000 METRE 350.80 35080

65 18.16 Providing and fixing brass stop cock of approved quality :

18.16.1 15 mm nominal bore 32.000 METRE 303.80 9722

18.16.2 20 mm nominal bore 28.000 METRE 328.00 9184

66 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

18.17.1 25 mm nominal bore 28.000 EACH 532.30 14904

18.17.2 32 mm nominal bore 34.000 EACH 589.90 20057

18.17.3 40 mm nominal bore 22.000 EACH 707.30 15561

67 18.19.2.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore 40.000 EACH 677.60 27104

68 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass ions :45 cm length 15 mm nominal bore 90.000 EACH 85.20 7668

69 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 20.000 EACH 434.20 8684

70 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore 20.000 EACH 715.10 14302

71 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 16.000 EACH 708.40 11334

72 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 24.000 EACH 594.80 14275

73 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore 30.000 EACH 500.40 15012

74 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks 40.000 EACH 198.50 7940

75 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 20.000 EACH 217.10 4342

76 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 4000.000 per litre 9.70 38800

77 18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 20.000 EACH 115.70 2314

78 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White itreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap each 1818.50 12.000 EACH 2369.90 28439

79 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 8.000 EACH 1500.00 12000

80 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia 24.000 EACH 104.40 2506

81 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 16.000 EACH 1068.50 17096

82 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 16.000 EACH 713.30 11413

83 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not lessthan 190 gms 16.000 EACH 424.00 6784

84 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 520.000 METRE 257.50 133900

85 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/ accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.2.2 Single pushfit coupler 110 mm 48.000 EACH 374.60 17981

86 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 283.180 EACH 182.72 51743

87 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 32.000 EACH 47.90 1533

88 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 10.000 EACH 4470.90 44709

89 17.2.1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. 6.000 EACH 4230.00 25380

90 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 250 mm 2.000 EACH 5231.50 10463

91 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 28.000 EACH 146.30 4096

92 17.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 8.000 EACH 6469.00 51752

93 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms 28.000 EACH 204.70 5732

94 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

96 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :

97 19.2.2 150 mm diameter S.W. pipe 50.000 METRE 494.40 24720

98 19.4.3.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2.000 EACH 1994.10 3988

99 19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2.000 EACH 4266.80 8534

100 6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron concrete (1: 4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 220.000 Per m 582.50 128150

101 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand ) 6.820 CUM 4819.90 32872

102 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 10.920 CUM 5017.90 54795

103 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of entring,shuttering, finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 4.400 CUM 4688.30 20629

104 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running\ charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia 180.000 METRE 486.80 87624

105 24.2.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 300 mm dia 72.000 METRE 567.90 40889

106 24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 100 mm nominal size dia 170.000 METRE 546.10 92837

107 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for `all depths,as per direction of Engineer -in-charge. 150 mm nominal size dia 52.000 METRE 660.10 34325

24.4.1 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-incharge.100 mm nominal size dia 30.000 METRE 573.10 17193

108 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 20.000 CUM 1188.90 23778

109 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 12.000 CUM 1195.60 14347

110 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 8.000 CUM 1195.60 9565

111 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 20.560 CUM 1343.20 27616

112 24.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 4.000 EACH 1213.20 4853

113 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia 4.000 EACH 210.70 843

114 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp 4.000 EACH 1531.40 6126

115 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia 4.000 EACH 281.80 1127

116 18.37.1 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100A 4.000 EACH 6849.90 27400

117 046 SUPPLY+15%CP SUPPLY WATER TANKER DO ALL THIS COMPLETE JOB FOR E/I. 2.000 EACH 1380.00 2760

118 24.13.1 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm dia 2.000 EACH 189.70 379

119 24.14.1 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.100 mm clamp 2.000 EACH 1448.40 2897

120 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

18.9.4 32 mm nominal outer dia Pipes 70.000 METRE 359.10 25137

18.9.3 25 mm nominal outer dia Pipes 30.000 METRE 294.70 8841

18.9.2 20 mm nominal outer dia Pipes 10.000 METRE 205.30 2053

121 N/S S/F/F/ SUBMERSIBLE 1 HP WITH CABLE DO ALL THIS COMPLETE JOB FOR E/I. 2.000 EACH 20000.00 40000

122 NS/Rate approved by se building Circle muz. Supplying testing installing and commisioning of ISI marked 4.5kg capacity carbon dioxide type including valve hose reel with provision of wall bracket fixed with anchor fasteners all complete Job. 14.000 EACH 8500.00 119000

TOTAL (EXCEPT N.S. ITEM COST) - 45034437

C F of 0.982 on SOR Item Rs 44223817

123 Add GST 5.36% BCD Letter No-5751 Dated-18-07-2023 2370397

Total N S Item Rs (+) 159000

GRAND TOTAL (Civil) - 46753214

ELECTRICAL WORK

124 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Fan/Wall Fan Point

Exhaust Fan Point

Call Bell Point

125 1.3 Wiring for light point/ fan point/ exhaust fan point/ Call bell Point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable size G.I box etc. as required. 0.000

126 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 760.000 Meter 309.00 234840

127 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.000

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1080.000 Meter 201.00 217080

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (for 3/2X5A socket Point) 700.000 Meter 246.00 172200

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 150.000 Meter 309.00 46350

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 200.000 Meter 422.00 84400

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 240.000 Meter 660.00 158400

128 1.24 Suppyling and fixing following modular switch/socket on the existing modular plate & switch bos including connections but excluding modular plate etc. as required. (for on switch board) 0.000

1.24.1 5/6 amps switch 62.000 Each 82.00 5084

1.24.4 3 pin, 5/6 amps socket outlet 62.000 Each 112.00 6944

129 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 78.000 Each 358.00 27924

130 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 62.000 Each 531.00 32922

131 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 224.000 Each 64.00 14336

132 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 144.000 Each 80.00 11520

133 1.37 Supplying and fixing Ding-Dong call bell suitable for single phase, 230 volts complete as required. 6.000 Each 240.00 1440

134 1.27 Supplying and fixing following modules G.I. box along withh modular base and cover plate for modular switches in recess etc as required. 0.000

135 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 10.000 Each 683.00 6830

136 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 54.000 Each 778.00 42012

137 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.000

2.8.7 12 way, Double door ((for Light Point ) 10.000 Each 2,314.00 23140

138 2.9 Supplying and fixing following way three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator) 0.000

2.9.1 4 way ( 4 + 12 ), double door, horizontal type 10.000 Each 4,184.00 41840

139 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.000

2.12.1 6 A to 32 A, Single pole 220.000 Each 237.00 52140

2.12.6 40A to 63A amps, SPN (one spare SPN) 20.000 Each 1,233.00 24660

140 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.000

141 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.000

142 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 16.000 Sq.ft 1,809.00 28944

143 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2.000 Each 6,536.00 13072

144 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 132.000 Each 521.00 68772

145 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.000

146 5.10 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser, IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 18.000 Each 1,275.00 22950

147 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.000

148 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.000

6.1.4 9/10 watt LED lamp 144.000 Each 161.00 23184

149 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 78.000 Each 2,482.00 193596

150 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.000

151 8.18 Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required. 0.000

152 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 30.000 Each 1,038.00 31140

153 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.000

154 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cble of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.000

7.1.2 Above 35 sq. mm and upto 95 sq. mm 180.000 Meter 326.00 58680

155 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 4.000 Set 16,675 66700

156 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc as required. 50.000 Meter 144.00 7200

157 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.000

7.9.2 4 X 16 sq. mm (for Interconnection) 8.000 Meter 1,018.00 8144

7.9.3 4 X 25 sq. mm (for Interconnection) 6.000 Meter 1,881.00 11286

158 AR Supplying of copper strip of all sizes for bus bar strip/interconnection including drilling holes etc as reqd. 12.000 Kg 871.00 10452

FOR LIGHTNING ARRESTER 0.000

159 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 8.000 Each 416.00 3328

160 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 40.000 Each 81.00 3240

161 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 160.000 Meter 102.00 16320

162 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 60.000 Meter 145.00 8700

163 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 4.000 Set 6,323.00 25292

164 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 40.000 Meter 133.00 5320

TOTAL (Electrical) - 2831154

TOTAL (Civil) + Electrical)- 49584368

Executive Engineer,

Building Division Muzaffarpur

50% QUANTITY OF DIFFERENT OF WORK AND AMOUNT OF ELECTRICAL & WATER SUPPLY WORK

SL.NO. ITEM OF WORK QUANTITY/ AMOUNT UNIT

1 EARTH WORK/SAND FILLING WORK 2798.000 M3

2 BRICK WORK 389.370 M3

3 RCC/PCC 616.700 M3

4 STONE AND TILE FLOORING 1102.910 M2

5 ELECTRICAL WORK 1415577.000 RUPEES

6 FIRE FIGHTING WORK 59500.000 RUPEES

7 PLUMBING WORK 548345.000 RUPEES

Executive Engineer,

Building Division Muzaffarpur