Loading…
Loading…
Tender Value
₹77.7 L
EMD Value
₹1.6 L
Closing Date
5 Jan 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SRDSTE/CO
17 conditions · 6 needing a document upload
10.2. Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Balance Sheet Declaration- Balance sheet for the 4th previous year (i.e. FY 2021-22 or as applicable) as per para 10.2 of GCC-2022 shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annex-VI B or a self declared certificate as attached duly signed by chartered accountant and the tenderer that the balance sheet of last financial year (i.e. FY 2024-25 or as applicable) has not been audited/yet to be prepared. If, balance sheet of last financial year (i.e. FY 2024-25 or as applicable) is not yet audited/ prepared ,then NIL position to be uploaded.
10.1 Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Bidder has to upload requisite information as per Annexure V(A) along with the offer.
Definition of similar work:- Any work involving laying and jointing of any underground Telecom cables OR Laying and splicing OFC or augmentation of telecom facilities.
30 conditions · 6 needing a document upload
Stamp Duty fee for Bank Guarantee (for bid security) should be paid which should be 0.5% of the Bid security or Rs.10,000/-, whichever is less or as per latest/revised state policy of UP state.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Apostille certificate.(Note:In case of non-submission of above documents, offer may be summarily rejected)
The tenderer will give full information ( in annexure-A) as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender,if a tenderer is - i) be a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, whether in the executive or administrative capacity or whether holding a pensionable post or not, in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, OR ii) being partnership firm / joint venture (JV) / registered society / registered trust etc have as one of its partners/members a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, OR iii) being an incorporated company have any such retired Engineer of the gazetted rank or any other gazetted officer working before his retirement as one of its directors AND in case where such Engineer or officer had not retired from government service at least 1 year prior to the date of submission of the tender
If a tenderer or Contractor being an individual, have member(s) of his family or in the case of partnership firm/ company / joint venture (JV) / registered society / registered trust etc. one or more of his partner(s)/shareholder(s) or member(s) of the family of partner(s)/shareholder(s) having share of more than 1% in the tendering entity employed in gazetted capacity in the Engineering or any other department of the railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons. ( in annexure-A)
An undertaking shall be submitted by sole proprietorship firm, HUF, JV, LLP, Company registered under companies Act 2013 that he/they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.(Note: Each member must sign separately in case of JV/Partnership firm/LLP.).(Note: IN case of non submission of above documents, offer may be summarily rejected).
In case of partnership firm an undertaking shall be submitted by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (Note: In case of non-submission of above documents, offer may be summarily rejected)
Please submit your bank details i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Whether the cost of tender form is submitted in hard copy if uploaded as a scanned copy in website.
Whether the cost of Bid Security is submitted in hard copy if uploaded as a scanned copy in website.
16.(1) Security Deposit: The Security Deposit shall be 5% of the contract value. The Bid Security submitted by the Contractor with his tender will be retained/encashed by the Railways as part of security for the due and faithful fulfilment of the contract by the Contractor. Provided further that, if Contractor submits the Cash or Term Deposit Receipt issued from a Scheduled commercial bank of India or irrevocable Bank Guarantee Bond from a Scheduled commercial bank of India, either towards the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security, to the Contractor. Balance of Security Deposit may be deposited by the Contractor in cash or Term Deposit Receipt issued from Scheduled commercial bank of India or irrevocable Bank Guarantee bond issued from Scheduled commercial bank of India, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract. The Irrevocable Bank Guarantee submitted towards Security deposit shall be initially valid up to the stipulated date of Maintenance period plus 60 days and shall be extended from time to time, depending upon extension of contract granted in terms of Clause 17A and 17B of the Standard General Conditions of Contract. Note: Security Deposit deposited in cash by the Contractor or recovered from the running bills of a Contractor or submitted by contractor as Term Deposit Receipt(s) can be refunded/returned to the contractor, in lieu of irrevocable Bank Guarantee bond issued from scheduled commercial bank of India, to be submitted by him, for an amount equal to or more than the already available Security Deposit, provided however that, in a contract of value less than Rs. 50 Crore, such refund/ return of the already available Security Deposit is permitted up to two times and in a contract of value equal to or more than Rs. 50 Crore, such refund / return of the already available Security Deposit is permitted up to three times.
16.(4) Performance Guarantee:- The procedure for obtaining Performance Guarantee is outlined below: (a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty-one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty-one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty- one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
(b)The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, amounting to 3% of the original contract value: - (i)A deposit of Cash; (ii)Irrevocable Bank Guarantee; (iii)Government Securities including State Loan Bonds at 5% below the market value; (iv)Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India; (v)Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India; (vi)Deposit in the Post Office Saving Bank; (vii)Deposit in the National Savings Certificates; (viii)Twelve years National Defence Certificates; (ix)Ten years Defence Deposits; (x) National Defence Bonds and (xi) Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted. (c)The Performance Guarantee shall be submitted by the successful bidder after the Letter of Acceptance (LOA) has been issued, but before signing of the contract agreement. This P.G. shall be initially valid upto the stipulated date of completion plus 60 days beyond that. In case, the time for completion of work gets extended, the Contractor shall get the validity of P.G. extended to cover such extended time for completion of work plus 60 days. (d)The value of PG to be submitted by the Contractor is based on original contract value and shall not change due to subsequent variation(s) in the original contract value. (e)The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the Contractor has completed the work in all respects satisfactorily. (f)Whenever the contract is rescinded, the Performance Guarantee already submitted for the contract shall be encashed. (g)The Engineer shall not make a claim under the Performance Guarantee except for amounts to which the President of India is entitled under the contract (not withstanding and/or without prejudice to any other provisions in the contract agreement) in the event of: (i)Failure by the Contractor to extend the validity of the Performance Guarantee as described herein above, in which event the Engineer may claim the full amount of the Performance Guarantee. (ii)Failure by the Contractor to pay President of India any amount due, either as agreed by the Contractor or determined under any of the Clauses/Conditions of the Agreement, within 30 days of the service of notice to this effect by Engineer. (iii)The Contract being determined or rescinded under clause 62 of these conditions.
Telecom work in connection with [a] construction of sport complex building at DSA ground, Prayagraj, [b] upgradation of IRTMTC auditorium, Provision of transit rooms for visiting faculty, Provision of new hostel with 20 rooms for female trainees, Provision of 04 new AC classrooms in IRTMTC at Subedarganj, [c] construction of second floor of centralized store in DRM office campus, Prayagraj.
PRYJ-Sig-039-2025-26~NCR
PRYJ-Sig-039-2025-26
Open
Works - General
12 Months
Prayagraj, Uttar Pradesh
₹0
₹1.6 L
5 Jan 2026
19 Dec 2025
22 Dec 2025
135 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 77,66,950.02 | ||
| — | 10980.00 | — | — | ||
| Supply of UTP CAT-6 cable of reputed Make- Siemen, Systemax, D-Link, Tyco, Krone, AMP, Digisol, Organic or similar. Inspection by- Consignee | — | — | — | 2,45,403 | |
| — | 4000.00 | — | — | ||
| Supply of Indoor Telephone PVC Cables 5 pair 0.5 mm from reputed sources. Inspection by- Consignee | — | — | — | 43,160 | |
| — | 19980.00 | — | — | ||
| Laying of Data cable/Communication cable/Power cable etc. in PVC conduit pipe with all fittings and accessories [As per site requirement]. Inspection by- Consignee | — | — | — | 3,55,044.6 | |
| — | 3600.00 | — | — | ||
| Floor/wall cutting and refilling the same by mason including supply and laying of 25 mm PVC pipe ISI medium. Inspection by- Consignee | — | — | — | 3,32,604 | |
| — | 1000.00 | — | — | ||
| Supply and fixing of PVC conduit pipe 25 mm with accessories such as bend, tee, coupling, elbow, saddle, clamp, screw, PVC/ wooden plugs etc. on walls, angle or on rail of platform shelter etc. MS clamp made of 3 mm MS flat to be manufactured and supplied and fixed to clamp the PVC pipe or angle/ rail run of platform shelter. The clamp should be painted with red oxide primer over which two coats of aluminium paint to be given. Where ever necessary jumper holes to be made in wall and above PVC pipe threaded and wall to be repaired to its original condition. Inspection by- Consignee | — | — | — | 25,560 | |
| — | 600.00 | — | — | ||
| Supply, fixing, termination,indoor wiring, testing and commissioning of PVC flexible pipe dia. 1 inch Inspection by- Consignee | — | — | — | 30,762 | |
| — | 10.00 | — | — | ||
| Supply, testing and commissioning of 24 port, Gigabit Ethernet PoE switch, Layer-2 as per RDSO specification no. RDSO/SPN/TC/83/2020, Rev- 2.1 or latest along with cable and all accessories of reputed make as Cisco/D-Link/HP or similar. Inspection by- Consignee | — | — | — | 4,65,107.8 | |
| — | 82.00 | — | — | ||
| Supply and Installation of Modular socket Box with one RJ-11 double Socket Box and two RJ-45 socket complete with 3 module metal flush box and top plate with all required accessories. It Shall comply to TEC GR No. TEC/ GR/ SLC - 01/02. AUG 05 [TEC Standard Number: TEC 52010:2005] with latest amendments, Version. Inspection by- Consignee | — | — | — | 56,960.48 | |
| — | 25.00 | — | — | ||
| Supply, testing and commissioning of 6 Point spike buster [Metal body] with MCB. Make - Anchor, Polycab or similar. Inspection by- Consignee | — | — | — | 19,477.75 | |
| — | 2200.00 | — | — | ||
| Supply, termination, testing and commissioning of RJ-45 Connector. Make- D-Link, Digisol, 3M or similar. Inspection by- Consignee | — | — | — | 13,134 | |
| — | 850.00 | — | — | ||
| Supply of SC[APC] - SC/ SC[APC]/LC simplex Single Mode OFC patch Cord of minimum 2 M length. Inspection by- Consignee | — | — | — | 2,92,136.5 | |
| — | 50.00 | — | — | ||
| Supply of SFP-s with specification as follows- Data Rate - 1 GBPS, TX/RX wavelength - 1310/ 1550 nm, Upto distance - 20 Km, Media Type - Single Mode fiber [SMF], Single Fiber LC type connector, Compatibility - Multi-vendor MSA Compatible. Inspection by- Consignee | — | — | — | 1,09,210 | |
| — | 5.00 | — | — | ||
| Supply and installation of 19 inch rack of 24U size and depth 650 mm with two nos of cable tray for accomdating modems, 2 Nos of power strips of minium 4 sockets each with MCB and two nos of fan for proper ventilation with required accessories for mounting the equipment's. Inspection by- Consignee | — | — | — | 1,25,189 | |
| — | 60.00 | — | — | ||
| Supply, fixing, termination, indoor wiring, testing and commissioning of I.O. Box. Make- D-Link, Digisol, 3M or similar. Inspection by- Consignee | — | — | — | 22,625.4 | |
| — | 550.00 | — | — | ||
| Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300 mm x 300 mm, laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it afterwards as per original condition. In hard rocky ground area, cables will be laid normally on layer of soft earth of 0.05 Mtr. thickness previously deposited at bottom of the trench. The cutting to be filled and finished with cement/concrete, as per the RDSO drawing no. SDO/Cable laying/008, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest. Inspection by- Consignee | — | — | — | 87,345.5 | |
| — | 800.00 | — | — | ||
| Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest, alongside the track in normal soil/strata (including soft rock), conforming to distances as per cable route plan and refilling and ramming of loose soil. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately. The work shall be done as per the extant practice on North Central Railway and instructions of Railway Engineer at site. In case 1.2 m depth of trench is not achievable due to site conditions, specific approval of JAG/SG Officer will be required for each site where trench depth of 1.2m is not possible, only after approval of JAG/SG Officer proportionate payment can be done. Inspection by- Consignee | — | — | — | 51,752 | |
| — | 5.00 | — | — | ||
| Supply and testing of Amplifier 1000 plus 1000 = 2000 Watts at 8 ohm, Frequency response +-1.0 dB, S/N ratio 101 dB, Cross talk less than -60dB, Total harmonic distortion 0.1% [1 KHz, 10W], 0.3% [1 KHz, Half power], latency 1.5 msec. Make- Yamaha PX-10 or similar. Inspection by- Consignee | — | — | — | 2,75,383.7 | |
| — | 30.00 | — | — | ||
| Supply of waterproof column speaker 30 watts. Make - SP-6305TD of Ahuja make or similar. Inspection by- Consignee | — | — | — | 1,15,500 | |
| — | 2400.00 | — | — | ||
| Supply, installation, testing a commissioning of 2 core screened/ shielded multistrand PVC insulated wire (24/0.2 mm dia) for speaker load line. Inspection by- Consignee | — | — | — | 1,16,760 | |
| — | 20.00 | — | — | ||
| Supply, erection, foundation, fixing & commissioning of Hot Dip Galvanised octagonal pole 5 Mtrs. Long confirming to IS:2629/BSEN ISO: 1416 latest version, Manufacturer should be ISO certified firm. Inspection by- Consignee | — | — | — | 1,36,973.6 | |
| — | 8.00 | — | — | ||
| Supply and installation of Solid-state Amplifier model TZA-4000EM make Ahuja or similar, along with one small stand. Inspection by- Consignee | — | — | — | 1,46,980.32 | |
| — | 19.00 | — | — | ||
| Supply of Professional high quality PA Gooseneck Microphone with base stand for microphone. Microphone should be suitable for various PA applications such as on Lecterns and Podiums, Open Conferences etc. with sleek and slender design. Frequency response 20 to 18000 Hz, impedance 1000 ohm, sensitivity 7.5 mv/pa. Make- Ahuja GM 615 with base stand GMB-6C or similar. Inspection by- Consignee | — | — | — | 48,179.82 | |
| — | 1.00 | — | — | ||
| Supply of Podium Acrylic Podium with minimum specification as - Height- 44 inch at speaker side, 46 inch at audience side, Top area- 24 X 16 inch, Thickness- 12 mm, material- transparent acrylic equipped with holes for microphone. Inspection by- Consignee | — | — | — | 20,588.64 | |
| — | 8.00 | — | — | ||
| Supply of cordless handheld Microphone with minimum specification as- upto 300 ft. operating range in line of sight, audio range- 50 - 15000Hz, 524- 865 MHz frequency range, 10 mW or more transmitter RF power, system distortion-less than 0.5%, XLR and 1/4 inch unbalanced audio output connector. Make:- Shure BLX 24 with SM 58 or similar Inspection by- Consignee | — | — | — | 1,79,834.88 | |
| — | 2500.00 | — | — | ||
| Supply of 10 pair 0.5mm Copper conductor unarmored PIJF cable from reputed source as per TEC GR No. GR/CUG-01/03 AUG 2003 or latest. Inspection by- Consignee | — | — | — | 73,025 | |
| — | 1750.00 | — | — | ||
| Supply of power cable 3 core, 2.5 sq mm, multi strand cable as per IS 694:1990 reaffirmed 1995 or latest suitable for Railway electrification area, shall be of reputed make like Havells, Delton, LAPP, Finolex, or superior. Inspection by- Consignee | — | — | — | 1,32,457.5 | |
| — | 2500.00 | — | — | ||
| Supply of OFC - Armoured 12 F of reputed make. Inspection by- Consignee | — | — | — | 54,925 | |
| — | 6.00 | — | — | ||
| Supply of Fibre Distribution Management system [FDMS]/LIU for 24 Fiber complete with all accessories with patch cord and pigtail. Make- R&M, Rackom, D-Link or similar. Inspection by- Consignee | — | — | — | 19,089.72 | |
| — | 6.00 | — | — | ||
| Installation and commissioning of Fibre Distribution Management system [FDMS] for 24 Fiber complete with all accessories. Inspection by- Consignee | — | — | — | 22,658.76 | |
| — | 20.00 | — | — | ||
| Supply of Miniature Circuit Breaker, 6 Ampere, 1 pole as per ISI Standard as per site requirement. Make - Schneider, L&T, Havells or similar. Inspection by- Consignee | — | — | — | 6,700 | |
| — | 20.00 | — | — | ||
| Supply of Miniature Circuit Breaker, 16 Ampere, 2 pole as per ISI Standard as per site requirement. Make - Schneider, L&T, Havells or similar. Inspection by- Consignee | — | — | — | 19,500 | |
| — | 20.00 | — | — | ||
| Supply of Miniature Circuit Breaker, 3 Ampere, 1 pole as per ISI Standard as per site requirement. Make - Schneider, L&T, Havells or similar. Inspection by- Consignee | — | — | — | 11,000 | |
| — | 4.00 | — | — | ||
| Supply of floor type mic stand Inspection by- Consignee | — | — | — | 10,000 | |
| — | 1.00 | — | — | ||
| Supply of channel mixer 16 channel with minimum specification as - 16-Channel Mixing Console, Max. 10 Mic / 16 Line Inputs [8 mono + 4 stereo], 4 GROUP Buses + 1 Stereo Bus, 4 AUX [incl. FX], 1-Knob compressors, High-grade effects: SPX with 24 programs, 48V phantom power. Make- Yamaha MG16X or similar Inspection by- Consignee | — | — | — | 41,257 | |
| — | 12.00 | — | — | ||
| Supply of XLR microphone cable 25 meter long with connector Inspection by- Consignee | — | — | — | 42,000 | |
| — | 2.00 | — | — | ||
| Supply of Projector make Benq [view sonic] LSC 801 WU 8000 Luminum Laser 4K or similar Inspection by- RITES | — | — | — | 8,39,680 | |
| — | 6.00 | — | — | ||
| Supply of HDMI Optical Fiber Cable Length 20 meter make Impression or Similar with following technical specifications 1-Support- 4K 2- Version V 2.0, 3- Band Width -16 Gbps 4- Plug and play device no external power supply is required. Inspection by- Consignee | — | — | — | 49,789.98 | |
| — | 1.00 | — | — | ||
| Supply of RJ 45 to HDMI converter 4K UTP 100 Mtrs. Inspection by- Consignee | — | — | — | 12,390 | |
| — | 1.00 | — | — | ||
| Supply of PVC Screen customized of size 30 feet x 20 feet with framing on GI stand with covering by ACP sheet. Inspection by- Consignee | — | — | — | 41,890 | |
| — | 1.00 | — | — | ||
| Supply of Sealing hanging projector stand for suitable size Inspection by- Consignee | — | — | — | 11,210 | |
| — | 1.00 | — | — | ||
| Installation of complete job for projector and screen with framing as per site requirement. Inspection by- Consignee | — | — | — | 29,500 | |
| — | 2.00 | — | — | ||
| Supply of Speakers with minimum specification as- 2-way passive loudspeaker, Driver Size- 15 inch LF woofer with a 3 inch voice coil and a 2 inch HF compression driver with a 1 inch throat Power, Rating- 800W Program [PGM], 1600W Peak, Passive Frequency Response [-10dB]- 43Hz - 20kHz, Max SPL: 129 dB [Passive]. Make- Yamaha CZR 15 or similar. Inspection by- Consignee | — | — | — | 1,22,720 | |
| — | 2.00 | — | — | ||
| Supply of Sub Woofers with minimum specification as- bass-reflex type subwoofer, 18 inch subwoofer with 4 inch Voice Coil, Ferrite magnet, High power 1000W [PGM] input, 133dB SPL, Extend Frequency range [-10dB]- [29-150Hz]. Make- Yamaha CXS 18XLF or similar. Inspection by- Consignee | — | — | — | 1,22,720 | |
| — | 12.00 | — | — | ||
| Supply of Speaker Delay and Sidefill with minimum specification as- 2-way passive loudspeaker, Driver Size- 12 inch LF woofer with a 3 inch voice coil and a 2 inch HF compression driver with a 1 inch throat Power, Rating- 800W Program [PGM], 1600W Peak, Passive Frequency Response [-10dB]- 43Hz - 20kHz, Max SPL: 129 dB [Passive] with Custom speaker wall bracket. Make- Yamaha -CZR12 make or similar. Inspection by- RITES | — | — | — | 6,28,704 | |
| — | 2.00 | — | — | ||
| Supply of Speaker stage monitor with minimum specification as- passive two-way, LF Driver- Diameter- 15 inch cone, 3 inch voice coil and 1.75 inch HF driver, Power Handling- 550 W [PGM], 1100W Peak, Frequency Response - 58 Hz - 20 kHz, Max SPL- 125 dB. Make- Yamaha CHR15M make or similar. Inspection by- Consignee | — | — | — | 1,08,560 | |
| — | 1.00 | — | — | ||
| Supply of Channel Mixer with minimum specification as- 24 Mic Inputs with 48V Phantom Power and HPF per Channel, 32 Line Inputs [24 mono and 4 stereo], 6 AUX Sends + 2 FX Sends, 4 GROUP Buses + ST Bus, 2 Matrix out, 1 Mono out, Total harmonic distortion- 0.02% or less, Cross talk- [-74dB @ 1kHz] or less, Frequency range- [+0.5/-1.0dB 20Hz - 20kHz]. Make- Yamaha mgp 32x or similar. Inspection by- Consignee | — | — | — | 1,35,000 | |
| — | 100.00 | — | — | ||
| Fiber Splicing/termination and testing spliced joint Inspection by- Consignee. (Per Unit=Per Fiber) | — | — | — | 9,367 | |
| — | 6.00 | — | — | ||
| Supply and Fixing on wall with the help of Farse nut of 12 U Networking Rack 19 inch with Front Glass Door, 06 Socket Power DB with MCB, 02 Fan-Fan Tray, Cable Manager , Hardware Packet , Earthing etc. Make : APW-President or similar of reputed make. Inspection by- Consignee | — | — | — | 47,916.78 | |
| — | 2.00 | — | — | ||
| Supply of 1X8 HDMI Splitters/HDMI Distribution Amplifier supported upto 4K UHD, Make - Impression /Kanex Pro Model :-W/HDCP2.2 / Bestnet Model:-BNHDMI-108SP-V1.4 / Primesol or Similar. Inspection by- Consignee | — | — | — | 18,922.44 | |
| — | 1.00 | — | — | ||
| Supply of Remote Fault Diagnostic System with minimum specification - Intel i7 [up to 4.7 GHz] 10 Cores and 12 MB Cache, Windows OS latest, MS office professional latest, RAM- 16 GB DDR4, Storage- 1 TB SSD, Screen- 14 inches. For voice logger/ NVR/ maintenance and testing purpose. Inspection by- Consignee | — | — | — | 1,02,195.53 | |
| — | 1.00 | — | — | ||
| Supply of SIP phone/ Console/ Endpoint for PABX system as per technical specification. Inspection by- Consignee | — | — | — | 30,363.07 | |
| — | 3.00 | — | — | ||
| Supply of Armoured Outdoor CAT-6 cable [305 Mtrs. Roll] as per ANSI/TIA 568-C.2 & ISO /IEC 11801 2nd Edition or latest. Make- D-Link, Digisol, Organic or similar. Inspection by- Consignee | — | — | — | 58,706.94 | |
| — | 3.00 | — | — | ||
| Supply of 8 port Gigabit Lite Managed PoE Layer 2 Switch supports 8 nos 10/100/1000BASE-T ports, along with 2 Gigabit SFP ports, green-saving technologies, make model DGGS1510HPL DIGISOL / CISCO/JUNIPER or superior. Inspection by- Consignee | — | — | — | 53,588.1 | |
| — | 5.00 | — | — | ||
| Supply and installation of free to air DTH connection with 10 mtrs wire. Inspection by- Consignee | — | — | — | 13,080 | |
| — | 1.00 | — | — | ||
| Supply of home theatre/Music system. Make-Sony ,Model no.-BDV-E3200 Real 5.1ch Dolbi Digital Blu ray or equivalent Inspection by- Consignee | — | — | — | 31,860 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 12 port FDMS/ LIU with connectors. [Pigtails and other miscelleneous materials required for the work shall be supplied by the contractor]. Make- R&M, Rackom, D-Link or similar. Inspection by- Consignee | — | — | — | 19,452.36 | |
| — | 4.00 | — | — | ||
| Fiber splicing/termination and testing of spliced joint of all fibers of 12 F OFC Inspection by- Consignee | — | — | — | 9,206.12 | |
| — | 300.00 | — | — | ||
| Horizontal direction drilling (HDD)/Trenchless digging/machine drilling without damage to surface road /track for laying/insertion of HDPE/GI/DWC pipe. The bore shall be done at the depth of minimum 1400 mm from the ground level. The ground level shall be considered ignoring the bank height of the bank of the road. Note: - DWC/HDPE/GI Pipe Supply is not covered under this item. Contactor shall provide all material required for work and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Inspection by- Consignee | — | — | — | 1,92,633 | |
| — | 0.50 | — | — | ||
| Supply of permanently lubricated HDPE duct, 40 mm outer dia, as per RDSO spec. No. RDSO/ SPN/ TC/ 45/ 2013 Rev.2 Amndt.2 or latest, along with all accessories like end caps, collars, bends, couplers etc. Inspection by- Consignee | — | — | — | 31,093.92 | |
| — | 0.50 | — | — | ||
| Laying of HDPE duct as per the approved cable route plan in the exavated trenches/other protected works/RCC channel etc. including all accessories like end caps, collars, bends, couplers etc. The ends of the duct to be sealed with end plugs till OFC blowing is done. Important: The laying of OFC cable independently or along with Quad cable/PIJF cable in the same trench shall be governed by the RDSO drawings no. RDSO/TCDO/COP-6 [a] and RDSO/TCDO/COP-8 [a] respectively, issued vide Chapter-XIII of the Telecomm Manual. Inspection by- Consignee | — | — | — | 3,275.81 | |
| — | 1000.00 | — | — | ||
| Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes etc. as per the site requirement and as per approved cable route plan. This also includes laying of cables in track crossings & road crossings. (Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. Inspection by- Consignee | — | — | — | 6,840 | |
| — | 22.00 | — | — | ||
| Supply of 32 watts wall speaker 2-way compact. Make- Ahuja PS-500TM or similar Inspection by- Consignee | — | — | — | 1,01,310 | |
| — | 8.00 | — | — | ||
| Supply and installation of Audio Amplifier similar to Ahuja Model SSA-250 or similar make, workable on AC: 220-240 V 50/60 Hz Dc :24V (2x12V car Battery DC supply with protection against wrong battery polarity connections in the control console, as directed at site. Inspection by- Consignee | — | — | — | 98,176 | |
| — | 4.00 | — | — | ||
| Supply and installation of LCD infrared optical 3840x2160 interactive panels and accessories with 3 GB RAM, 48 GB ROM, inbuilt screen recording, width of the effective display area of the panel- minimum 1709 mm and minimum height-928 mm. Make-True view or similar Inspection by- RITES | — | — | — | 7,67,591.6 | |
| — | 10.00 | — | — | ||
| Supply, Installation, Testing and commissioning of UHF Segment LCD liquid crystal display FM true diversity wireless microphone. Wireless Microphone should be in set of one handheld and one Lavellier [Collor] Microphone. Wireless handheld microphone with moving coil condenser. The microphone transmitter shall have max power 30 mw and it shall have feature of adopting true diversity reception mode, effectively avoiding frequency phenomenon and the extension of the receiving distance. It shall have following features- Frequency response- 80- 18 khz, Channel spacing 250 khz, distortion<=0.5%. Number of channel more than 180, Signal to Noise ratio more than 100db. Make- Sennheiser, Shure or similar. Inspection by- Consignee | — | — | — | 2,69,549.4 | |
| — | 12.00 | — | — | ||
| Supply and testing of Microphone cable 6.35 mm jack male to XLR 3 pin female cord for microphone 30 meter. MAKE- MX or similar. Inspection by- Consignee | — | — | — | 49,560 | |
| — | 200.00 | — | — | ||
| Supply, laying, testing and commissioning of cable RG-59 or superior [RG-6] Co-axial cable Inspection by- Consignee | — | — | — | 1,812 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .