Construction of Ahaar Kendra for CHC Chandragiri under AMA Hospital works in the District of Gajapati, Odisha.

Sl. No. Description of Works Amount in Rs.

A. CIVIL WORKS.

i. STILT FLOOR Rs. 53,41,047.68

iii. TERRACE FLOOR Rs. 8,36,898.93

B. PH, ELECTRICAL & OTHERS WORK Rs. 61,77,946.62

i INTERNAL P.H. WORK. Rs. 3,12,066.56

ii EXTERNAL P.H. WORK. Rs. 3,30,004.25

ii INTERNAL & EXTERNAL ELECTRICAL WORK. Rs. 6,42,070.81

iv KITCHEN & DINING FURNITURE AND EQUIPMENT Rs. 24,22,400.00

Price Cost(Including GST) Rs. 98,84,488.23

Digitally signed by JAYA

A. CIVIL WORK. :- (Ground Floor.)

Sl.no. Description of Items Units Qty Rate Amount

1 Earthwork in excavation in all types of soil (Hard

soi,ordinary soil,stony earth) for site leveling,

foundation, pits, trenches and other civil works upto

and including 1.5metre depth and stacking the soil Cum 105.24 274.11 28848.42

upto a lead of 100 metre and including dewatering,

removing slush, shoring and strutting (as required),

complete as per specification and as directed by the

Engineer-In-Charge.

2 Filling at all depth with available excavated earth

(excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 15cm in Cum 0.70 152.30 106.86

depth: consolidating each deposited layer by

ramming and watering complete (lead upto 100m) as

directed by the Engineer-In-charge.

3 Supplying of filling sand in foundation and over areas

including watering, ramming, consolidating and

dressing, labours, tools, taxes etc., all complete as per Cum 28.70 516.03 14808.44

the specification and direction of Engineer-In-Charge.

4 Supplying, diluting & preparing chemical emulsion like

imidaclosed 30.5% SC or other chemicals approved by

central insecticides Board or as directed by

manufacture and spraying the mixture uniformly by

sprayer as Pre-Constructional Anti Termite Treatment

confirming to IS 6313 (Part-II) and creating a

chemical barrier under and around the column pits,

wall treanches, basement excavation, top surface of

plinth filling, junction of walls and floors along with

external perimeter of the building, expansion joints,

surrounding of pipes and conduits etc. at the rate of

7.5liters per sqm on vertical surface and 5.0liters per

sqm on horizontal surface, 50% of the emulsion to be

filled in the holes made in treanches at 150mm centre

to centre (or as directed directed by the manufacture)

including the cost of all material, cost of all labour,

conveyance, loading, unloading, T&P, etc all complete

as per the direction of Engineer-in-charge. ( Approved

rate for MPH building Sl no-1)

5 Providing and laying plain cement concrete 1:4:8 (1

cement : 4 sand :8 stone agregate 40mm nominal

size) as levelling course in foundation and plinth etc. Cum 68.78 5622.68 386705.19

including tempering, curring, shuttering etc. complete

all depth and height.

6 First class Fly ash Brick masonry using bricks of size

25cm. x 12 cm. x 8 cm. having crushing strength not

less than 75 kg. Per. Sqr. Cm. in cement mortar of

mix( 1:6) with ordinary Portland slag cement(PSC)

and screened & washed sand for mortar after

immersing the bricks for 6 (Six) hours in water before

use in Foundation & Plinth including splays cutting,

circular moulding, corbelling, chamfering and similar

such type of works, watering and curing etc. including

cost, conveyance, loading, unloading, royalties and

taxes of all materials, cost of all labour, scaffolding,

sundries, T&P required for the works etc. complete in

all respect as directed by the Engineer-In-Charge. at

all floors and all heights.

Digitally signed by JAYA

Sl.no. Description of Items Units Qty Rate Amount

For Brick footing Cum 53.75 6522.07 350537.91

7 First class Fly ash Brick masonry using bricks of size 25Cum 75.51 6567.30 495889.79

8 Half Brick work with Fly Ash. Bricks in cement mortar

(1:4) in superstructure having crushing strength not

less than 75.00 kg/cm2 immerging the bricks in water Cum 0.72 6775.76 4878.55

not less than six hours before use in masonary .

9 Providing, lifting, hoisting and laying Reinforced

cement concrete of M-25 grade as per approved

designs and drawings having a minimum compressive

strength (in work test) 250 Kg. / Square cm. in 15

cm. cubes at 28 days after mixing and test conducted

in accordance with I.S. 516 using 12 mm. to 20 mm.

size black hard crushed broken granite stone chips

and screened and washed sharp sand for mortar of

approved quality from approved quarry, washed and

cleaned ( 20mm. size chips not to exceeds 25 % ) to

be mixed in concrete mixture with Portland slag

cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and

curing for 28 days, centering and shuttering then after 0.00 0.00 0.00

dismantling and removing debris from the work site

and finishing the exposed surface smooth providing

grooves or beads wherever necessary including cost,

conveyance, loading, unloading, royalties and taxes of

all materials and cost of all labours, sundries, T & P

required of the work etc. complete in all respect as

directed by the Engineer-in-Charge. But excluding

cost and conveyance of M.S. rods or Tor steel and

binding wires and labour charges for straightening,

cutting, bending etc. of M.S. rods or tor steel tying the

grills and placing in proper position. at all floors and

a) Foundation Cum 11.79 16353.57 192735.03

c) Plinth Beam Cum 7.38 16353.57 120670.72

h)Stair case Cum 3.99 460.77 1839.42

10 Supplying, straightening, cutting, bending, placing in

position and binding reinforcement steel work in

RCC/reinforced brick works as per drawing and

specification including preparation of respective bar Qtl 122.25 10388.70 1269997.90

bending schedule and binding (Binding wire to be

used as per the IS code) etc. all complete as per

direction of Engineer-In-charge. Cold Twisted bars,

Thermo-Mechanically-treated bars.

11 12mm cement plaster on external RCC/brick surfaces

in cement plaster 1:6 (1 cement : 6 coarse sand) Sqm 239.64 181.91 43592.08

including necessary scaffolding, curing etc. all

complete at all floors and all heights.

12 16mm cement plaster on internal smooth side of

RCC/brick surfaces with cement mortar of mix 1:6 (1

cement : 6 fine sand) including necessary scaffolding, Sqm 606.19 259.78 157474.54

curing etc. all complete at all floors and all heights.

Digitally signed by JAYA

Sl.no. Description of Items Units Qty Rate Amount

13 6 mm cement plaster on RCC surfaces at ceiling/slab

soffit and other locations with cement mortar of mix

1:4 (1 cement : 4 fine sand) including necessary Sqm 211.31 201.36 42549.27

scaffolding, curing etc. all complete at all floors and all

14 Providing and laying 600mmx600mm Non-Skid

Ceramic floor tiles confirming to IS:15622 of approved

make , quality and colour without any warpage laid

over 20mm thick base of cement mortar (1:4) (1

cement ,4 coarse sand) including cutting to size

,laying and filling the joints with white cement slurry,

mixed with colouring pigment to match the shade and Sqm 166.69 1338.26 223072.39

colour, cleaning the surfaces with oxiaic acid .

machine grinding . mirror poilshing including the cost

of all materials, cost of all labour,

conveyance,taxes,royalties. loading , unloading

,sundries. walering and curing , T&P,etc. complete as

per the direction of he Engineer-in-charge.

15 Providing and laying of glazed ceramic wall tiles in

dado/skirting confirming to IS 15622 of approved

make, quality colour and size 600mm x 300mm upto

required height from floor level fixed over an under

layer of 12mm thick bed of cement mortar (1:3)( 1

cement: 3 coarse sand ) including cutting to size

laying and filling the joints with white cement slurry

mixed with colouring pigment to match the shade and

colour, cleaning the surfaces with oxlaic acid, machine

grinding. mirror polishing including the cost of all

materils, cost of all labour, conveyance laxes royalties

loading unloading sundries, watering and curing T&P

etc. completes as per the direction of the Engineer-in-

charge. ( Note-sample of tiles shall be approved

16 before procurement

Supplying, and use.)

fitting & fixing of 30cm x 30cm/40cm x

40cm special plain/ printed series Ceramic floor tiles

of premium grade having thickness 7mm to 8mm

confirming to IS 13755. in floors laid on 20 mm thick

cement mortar (1:4) (1 cement : 4 course sand) and Sqm 11.51 1001.54 11529.12

filling joints with slurry including cost of all

materials, labour T&P etc. required for the work all

complete incl. rubbing as per direction of the

Engineer-in-charge

17 Supplying, fitting & fixing of 30cm x 20cm/20cm x

20cm special plain/printed series Ceramic wall tiles of

premium grade having thickness 6.5mm to 6.7mm

confirming to IS 13753 in dadoes, skirting and risers

of steps laid on 12 mm thick cement mortar (1:3) (1

cement : 3 course sand) jointed with slurry mixed Sqm 36.08 1065.05 38421.65

with pigment to match the shades of the tiles etc.

complete including cost of all materials, labour T&P

etc. required for the work all complete as per direction

of the Engineer-in-charge

Digitally signed by JAYA

Sl.no. Description of Items Units Qty Rate Amount

17 Providing and fixing 20mm thick Granite stone flooring

(sample of Granite stone should be approved by EIC)

for stair case trade, riser and similar locations where

ever required in horizontal/ vertical surfaces of

required size of approved shade, colour and texture,

with moulding edge etc. laid over 20mm thick bed of

cement mortar 1:4 (1 cement: 4 coarse sand) with Sqm 19.02 3261.27 62026.14

joints treated with white cement mixed with matching

pigment, epoxy touch ups including rubbing, curing,

moulding and polishing to give high gloss finish and

groove in staircase where required etc. complete as

per direction of Engineer-in-charge. In all floors and

18 Supplying, fitting & fixing of Granite Tiles of minimum

Above 0.4 sqm (20mm. thick) of approved make in

dadoes laid on 12 mm thick cement mortar (1:3)

(1 cement : 3 course sand) and filling joints with Sqm 11.65 2738.23 31905.83

slurry including cost of all materials, labour T&P etc.

required for the work all complete incl. rubbing as

per direction of the Engineer-in-charge

19 Providing and fixing of WPC door frames with rebate

cuts and finished cross section size 75mm x 45mm or

90mm x 50mm, including cost of all materials, cost of

all labour conveyance, taxes, loading, unloading Rmt 3.43 850.73 2913.76

scaffolding, slaging watering and curing, T&P, etc,

complete as per the direction of the Engineer-in-

20 Providing and fixing 32mm thick flush door shutters

conforming to IS:2002 (Part I) decorative type , core

of block board construction with frame of 1st class

hard wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face veneers

on both face of shutters inclusive of 4 nos of stainless

steel Butt hinges (100 mm x60 mm x2.5mm ) 40mm

stainless steel screws. Cylindrical Lock (Godrej-9843),

Tower bolt SS 10 x 300 mm (Bathroom) Godrej

3264,PVC Door buffer with SS screw , teak wood

lipping around the edges & paste with 1.5 mm thick

laminate on both side of the flush door , etc. including

the cost of all materials, hardware fittings, cost of all

labour, conveyance, loading, unloading, T&P, etc,

complete as per the direction of engineer-in-charge.

Digitally signed by JAYA

Sl.no. Description of Items Units Qty Rate Amount

21 Supplying and installing aluminium system - sliding

windows made out of ALPURE/ Equivalent make frame

dimension of 88mm x40mm & sash dimension of

31mm x61.5mm for with corners mechanical joints.

Alupure aluminium systems are extruded through

nalco billets with 6063 T6 grade with complete wind

load calculation as per IS: 875 (part-3) Almost

unlimited choice of colours due to finishing techniques

such as anodising and power finishing. The system

can accomodale glass with 4/5/6/8/10/12/14/20 &

22mm. The profile manufacture should have an

authorised fabrication partner for windows assembling

and installation. The windows must be installed

complete with all kind of ironmongery ( including

EPDM gaskets, bridging wedges and glass packers )

and with suitable water draining system. Application

of silicon sealant from inside/outside of Dowcoming /

GE or equivalent

22 Providing and fixing M.S grill/Gate of required

patterns for windows/verandahs etc. with M.S flats,

square or round bars etc. including applying a coat of

approved steel primer and two or more coats of Kg. 432.00 81.10 35035.80

synthetic enamel paint of approved make & shade, all

complete as per drawing & specification. (All steel

sections contractor's own supply).

23 Providing & Applying priming coat with Cement primer

of approved brand and manufacture on plaster surface

as per the instruction of Engineer-In-Charge at all Sqm 817.51 81.23 66406.97

elevations including all material & labour complete.

(Internal Surface)

24 Providing & Applying priming coat with Cement primer

of approved brand and manufacture on plaster surface

as per the instruction of Engineer-In-Charge at all Sqm 239.64 81.23 19466.00

elevations including all material & labour complete.

(External Surface)

25 Providing and applying to outside walls with two or

more coats of Anti-Fungal Weather coat water

proofing paint including scaffolding and cleaning the

surface before application of approved colour and Sqm 119.82 168.49 20188.48

manufacture as per specification, instruction of

Engineer-In-Charge at all elevations including all

material labour complete. (External Surface)

26 Providing and applying white cement based putty of

average thickness 1 mm of approved brand and

manufacturer, over the plastered wall surfaces to

prepare the surface even and smooth as per the Sqm 817.51 83.69 68413.46

instruction of Engineer-In-Charge at all elevations

including all material & labour complete. (Internal

27 Providing & painting two coats of Plastic emulsion

paint with 1st quality of approved brand and

manufacturer to give an even shade as per the Sqm 817.51 110.80 90581.27

instruction of Engineer-In-Charge at all elevations

including all material & labour complete. (Internal

Digitally signed by JAYA

Sl.no. Description of Items Units Qty Rate Amount

28 Providing & Painting with synthetic enamel paint of

approved brand and manufacture to give an even

shade as per the instruction of Engineer-In-Charge at Sqm 41.96 184.72 7749.81

all floors and all heights including all material & labour

29 Supplying, fitting and fixing of Stainless steel of 304

grade in hand ralling using 50mm dia of 2mm thick

circular pipe with Balustrade of size 32mm X 32mm X

2mm @ 0.90mtr. C/C and stainless square pipe

bracing of size 32mm X 32mm X 2mm in 3 rows in Kg. 74.27 396.95 29480.04

stair case as per approved design and specification,

buffing, polishing etc with cost, conveyance, taxes, all

materials, labour, T&P etc. required for the complete

in all respect.

Digitally signed by JAYA

A.vi CIVIL WORK. (Terrace Floor)

Sl.no. Description of Items Units Quantity Rate Amount

First class Fly ash Brick masonry using bricks of size 25cm. x 12

cm. x 8 cm. having crushing strength not less than 75 kg. Per.

Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland

slag cement(PSC) and screened & washed sand for mortar after

immersing the bricks for 6 (Six) hours in water before use in

Super structure including splays cutting, circular moulding,

1 corbelling, chamfering and similar such type of works, watering Cum 26.47 6913.03 182973.66

and curing etc. including cost, conveyance, loading, unloading,

royalties and taxes of all materials, cost of all labour, scaffolding,

sundries, T&P required for the works etc. complete in all respect

as directed by the Engineer-In-Charge. at all floors and all

Providing, lifting, hoisting and laying Reinforced cement concrete

of M-25 grade as per approved designs and drawings having a

minimum compressive strength (in work test) 250 Kg. / Square

cm. in 15 cm. cubes at 28 days after mixing and test conducted

in accordance with I.S. 516 using 12 mm. to 20 mm. size black

hard crushed broken granite stone chips and screened and

washed sharp sand for mortar of approved quality from approved

quarry, washed and cleaned ( 20mm. size chips not to exceeds

25 % ) to be mixed in concrete mixture with Portland slag

cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and curing for

28 days, centering and shuttering then after dismantling and

removing debris from the work site and finishing the exposed

surface smooth providing grooves or beads wherever necessary

including cost, conveyance, loading, unloading, royalties and

taxes of all materials and cost of all labours, sundries, T & P

required of the work etc. complete in all respect as directed by

the Engineer-in-Charge. But excluding cost and conveyance of

M.S. rods or Tor steel and binding wires and labour charges for

straightening, cutting, bending etc. of M.S. rods or tor steel tying

the grills and placing in proper position. at all floors and all

Supplying, straightening, cutting, bending, placing in position

and binding reinforcement steel work in RCC/reinforced brick

works as per drawing and specification including preparation of

3 respective bar bending schedule and binding (Binding wire to be

used as per the IS code) etc. all complete as per direction of

Engineer-in-charge.Cold Twisted bars, Thermo-Mechanically-

12mm cement plaster on external RCC/brick surfaces in cement

4 plaster 1:6 (1 cement : 6 coarse sand) including necessary

scaffolding, curing etc. all complete at all floors and all heights.

Staircase Sqm 252.14 189.05 47667.27

16mm cement plaster on internal smooth side of RCC/brick

5 surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) Sqm 291.64 266.16 77622.60

including necessary scaffolding, curing etc. all complete at all

floors and all heights.

6 mm cement plaster on RCC surfaces at ceiling/slab soffit and

6 other locations with cement mortar of mix 1:4 (1 cement : 4 fine Sqm 16.21 206.36 3345.90

sand) including necessary scaffolding, curing etc. all complete at

all floors and all heights.

Providing & Applying priming coat with Cement primer of

7 approved brand and manufacture on plaster surface as per the Sqm 307.85 83.12 25588.41

instruction of Engineer-In-Charge at all elevations including all

material & labour complete. (Internal surface)

Providing & Applying priming coat with Cement primer of

8 approved brand and manufacture on plaster surface as per the Sqm 252.14 84.38 21276.36

instruction of Engineer-In-Charge at all elevations including all

material & labour complete. (External surface)

Digitally signed by JAYA

Sl.no. Description of Items Units Quantity Rate Amount

Providing and applying to outside walls with two or more coats of

Anti-Fungal Weather coat water proofing paint including

scaffolding and cleaning the surface before application of

9 approved colour and manufacture as per specification, Sqm 252.14 172.98 43615.46

instruction of Engineer-In-Charge at all elevations including all

material labour complete. (External Surface)

Providing and applying white cement based putty of average

thickness 1 mm of approved brand and manufacturer, over the

10 plastered wall surfaces to prepare the surface even and smooth Sqm 307.85 85.42 26296.78

as per the instruction of Engineer-In-Charge at all elevations

including all material & labour complete. (Internal Surface)

Providing & painting Two coats of Plastic emulsion paint with 1st

11 quality of approved brand and manufacturer to give an even Sqm 307.85 112.81 34728.17

shade as per the instruction of Engineer-In-Charge at all

elevations including all material & labour complete.

Providing and laying grading conc. 25 mm (avg. thickness)

cement concrete of required slope of mix 1:2:2

(1cement:2sand:2 graded stone aggregate of 10 mm nominal

12 size) mixed with approved water proof compound as per sqm 245.03 379.55 93001.91

manufacturer's specification on top of slab including cement

slurry, all complete, including the cost of water proofing

admixture, which should be approved by the Engineer-In-Charge

prior to material procurement by the contractor.

13 Waterproofing Treatment :- Terrcae Roof Top Surface.

Providing and installing two component acrylic modified

cementitious waterproofing coating with masterseal

551/Equivalent over roof slab after carrying out pond test on

roof slab filling all defects, saturating the surface mixing the

products and then application in 2 mm thickness (1.8kg/sqm sqm 245.03 548.23 134332.31

coverage rate for 1mm thickness ) in suitable layers complete in

all respect, all materials, tools,plant & labour complete in all

respect. ( Approved rate for MPH building Sl no-05)

Total 836898.93

Digitally signed by JAYA

A. INTERNAL P.H. & SANITARY WORK.

Description of work Unit Qnty. Rate Amount Rs.

Providing and fixing Clorinated Polyvinyl Chloride [CPVC]

pipes SDR-11 conforming to IS:15778, having thermal stablity

for hot & cold water supply , including all CPVC plain & brass

threaded fitting including fixing the pipe with clamps at 1.00m

spacing . This includes jointing of pipes and fittings with one

stp CPVC solvent cement and testing of joints complete as per

specification and direction of Enfineer-in-charge. (Make-

Supreme/Ori-Plast/Ashirvad)

20 mm PVC sch-80 pipes Mtr 20.00 357.54 7150.80

25 mm PVC sch-80 pipes Mtr 7.17 497.37 3567.24

32 mm PVC sch-80 pipes Mtr 17.77 686.64 12203.14

50 mm PVC sch-80 pipes Mtr 34.49 1409.63 48615.16

Supplying all materials,labour and T&P for cutting holes

through existing brick work including making good to the

same in cement mortar(1:4) for taking G.I. pipes and fittings

/P.V.C. pipes and fittings all complete as per specification.

Supplying all materials,labour and T&P for cutting holes in

R.C.C. floors and roofs up to 19 cm. thick including for

passing GI / PVC pipes and fittings etc. and repairing the

3 holes after insertion of pipes etc. with cement concrete 1:2:4

including finishing complete to make it leak proof leak to the

damages all complete as per specification and direction of the

Engineer-in-charge.

Supplying all materials,labour and T&P for cutting groves in

pucca floor and walls for taking G.I. pipes and fittings /P.V.C.

pipes and fittings and making good to the damages all

complete as per specification.

Supplying all materials, labour T&P and fitting and fixing

brass/CP fittings of the following nominal bore with supply of

5 all joiniting materials complete as per specification and

direction of the Engineer-in-charge. (Make-

Somany/Cera/Hindware)

Supplying all labour and T&P for fixing 2 in 1 bib cock of the

a) following size as per specification all complete. (Make-

Somany/Cera/Hindware) 15mm Dia

Supplying all labour and T&P for fixing long body bib cock of

b) the following size as per specification all complete. (Make-

Somany/Cera/Hindware) 15mm Dia

Supplying all labour and T&P for fixing CP Angular stop cocks

polished bright confirming to IS:781-1995 of the following

nominal sizes as per specification all complete. (Make-

Somany/Cera/Hindware) 15mm Dia

Digitally signed by JAYA

Description of work Unit Qnty. Rate Amount Rs.

Supplying fitting fixing of C.P Pillar Taps highpressure lettered

Hot and cold with long screws shanks and back nuts of the

following nominal bore as per specification. (Make-

Somany/Cera/Hindware) 15mm Dia

Supplying all labour and T&P for fixing CP short body Bib cock

e) [taps] polished bright confirming to IS:781-1995 of the

following nominal sizes as per specification all complete .

Supplying all labour and T&P for fixing U.P.V.C Ball valve [

horizontal plungr type] confirming to IS:1703-1977 of the

following nominal sizes as per specification all complete.

(Make-Supreme/Ori-Plast/Ashirvad) 25mm Dia

Supplying all labour and T&P for fixing U.P.V.C Ball valve [

horizontal plungr type] confirming to IS:1703-1977 of the

following nominal sizes as per specification all complete.

(Make-Supreme/Ori-Plast/Ashirvad) 32mm Dia

Supplying all labour and T&P for fixing U.P.V.C Ball valve [

horizontal plungr type] confirming to IS:1703-1977 of the

following nominal sizes as per specification all complete.

(Make-Supreme/Ori-Plast/Ashirvad) 50mm Dia

Providing and fixing C.P. Brass Extension Nipple 1 inch with

i) extension piece as per direction of Engineer-in-charge. (Make- Each 5.00 694.51 3472.56

Somany/Cera/Hindware)

Supplying fitting fixing of CP waste of the following noninal

j) diameter for wash hand basin and sink as per specification. Each 5.00 448.52 2242.59

(Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing CP Gratings

of the following nominal diameter of outlet, of self cleaning

k) design with sand cast iron screwed down or hinged grating

with or without vent arm including cutting and making good

to the walls and floors etc. all complete as per specification.

(Make-Somany/Cera/Hindware)

Providing and fixing of approved make and model for

Chrome plated Grab Bar,for Physically challenged toilet, The

l) work shall include the cutting of walls or floors & making

good, complete as per direction of Engineer in Charge. (Make-

Somany/Viking/Cera)

Supplying fitting fixing of C.P health facuet high pressure

lettered Hot and cold with long screws shanks and back nuts

of the following nominal bore as per specification. (Make-

Somany/Cera/Hindware)

15mm dia CP Health Faucet of 1mtr long PVC tube

Digitally signed by JAYA

Description of work Unit Qnty. Rate Amount Rs.

Providing and fixing of Rational moulded polyethylene

cylendrical vertical water storate tanks confirming to

IS:12701-1996 including cutting holes through the tank and

fixing mild steel tubes and fittings and proviidng extra sockets

7 and jam nuts , fixing ball volve ete. including hoisting up to a

hite of 5.00metes above ground level and placing the tank to

the required position etc. all complete as per specification

and direction of the engineer-in-charge. (Make-

Supreme/Syntex/Astral)

i) 2000 litre capacity water storage tanks Each 2.00 33051.45 66102.89

Extra over item no.3.1.8 for hoisting Rational moulded

polyethylene cylendrical vertical water storage tanks of

ii) following sizes for every additional height of 5.00m. Or part Each 2.00 1411.04 2822.09

thereof complete as per specification and direction of the

engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-

PVC SWR soil waste ventilating pipes and fittings of the

following outside diameter conforming to ISI No 13592/1992

to walls with nails, bobbins and wooden plugs or laying in

trenches including jointing with supply of approved rubber

lubricant by non-heat application method/as per

manufacturer's specification, testing, earthwork in excavation

in all kinds of soil and refilling of trenches as per specification

and direction of the Engineer-In-Charge.(Make-Supreme/Ori-

Plast/Ashirvad)

110mm diameter PVC SWR pipes (Make-Supreme/Ori-

Plast/Ashirvad)

75mm diameter PVC SWR pipes (Make-Supreme/Ori-

Plast/Ashirvad)

110mm PVC door Tee Each 458.55 0.00

75mm PVC door Tee Each 345.74 0.00

110mm PVC offset Each 162.84 0.00

110mm PVC door bend Each 30 255.35 7660.56

75mm PVC door bend Each 45 134.64 6058.71

110mm PVC plain shoe bend Each 201.54 0.00

75mm PVC plain shoe bend Each 98.18 0.00

110mm PVC vent cowl Each 1 102.19 102.19

75mm PVC vent cowl Each 86.14 0.00

110mm P-trap Each 410.88 0.00

110mm SWR Pipe Clip Each 30 35.87 1076.16

75mm SWR Pipe Clip Each 12 27.61 331.34

110/75 mm Dia Reducer/Connector Each 10 305.03 3050.30

90mm Nahani Trap Each 4 171.81 687.23

Supplying all materials,labour and T&P for fixing of PVC 10 ltr

capacity low level flushing cistern with manually controlled

9 device[handle cover] confirming to IS 7231 with fittings and

fixtures etc. all complete as per specification. (Make-

Somany/Cera/Hindware)

10 Liters capacity PVC cistern

Supplying all materials,labour and T&P for fixing water closet

,squatting pan(Indian type.W.C.pan or Orissa pan) confirming

to IS 2556 : Part-3-2004 duly embedded in cement concrete

(1:4:8) using 40mm.nominal size h.b.g. chips [including foot

rest for I.W.C. and trap] all complete as per specificationand

directon of theEngineer - in - charge.

Orissa Pan - (Make-Somany/Cera/Hindware)

Digitally signed by JAYA

Description of work Unit Qnty. Rate Amount Rs.

Supplying all materials,labour and Supplying all

materials,labour and T&P for fixing in cement mortar (1:3) a

11 pair of white vitereous china (250x130x30mm.) foot rest for

squatting water closet. etc. all complete as per

specificationand direction of the Engineer-in-charge.

Foot Rest - (Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for Supplying all

materials,labour and T&P for fixing wash down water closet

(European type W.C.) with integral "S" or "P" trap tothe floor

with wooden plug and chromium plated screw including

jointing the trap with soil pipe in cement mortar (1:1) etc. all

complete as per specification.

EWC-(Make-Somany/Cera/Hindware) Each 1.00 3717.12 3717.12

Supplying all materials,labour and T&P for fixing plastic seat

and cover for wash down water closet with chromium plated

brass hinges and rubber buffers all complete as per

(Make-Somany/Cera/Hindware) Each 1.00 1089.61 1089.61

Supplying all materials,labour and T&P for fixing wash hand

basin with hole for pillar taps confirming to IS 2556:part4-

14 2004 with cast iron /M.S. brackets painted white including

cutting holes in walls and making good to the damages etc. all

complete as per specification.

(Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing of 600x450

bevelled edge mirror of superior glass mounted on 6mm thick

15 ac sheet or ply wood sheet and fixed to wooden plugs with

chromium plated brass screws and washers etc. All complete

as per specification .

600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion)

Supplying all materials,labour and T&P for fixing standard

size glass self with chromium plated brass brackets fixed to

wooden plugs with chromium plated brass screws and washers

etc. all complete as per specification.

(Make-Somany/Cera/Hindware) Each 1.00 932.32 932.32

Supplying all materials,labour and T&P for fixing standard

size C. P. towel rail fixed with chromium plated brass brackets

fixed to wooden plugs with cromium plated brass screws

complete as per specification.

CP towel rail-(Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing of cromium

plated brass soap dish complete with chromium plated brass

brackets fixed to wooden plugs with chromium plated brass

screws as per specification.

CP soap dish-(Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing standard

size C. P. towel ring fixed fixed to wooden plugs with

cromium plated brass screws complete as per specification.

(Make-Somany/Cera/Hindware)

Digitally signed by JAYA

Description of work Unit Qnty. Rate Amount Rs.

Supplying all materials,labour and T&P for fixing of liquid soap

container - glass container or plastic container with chromium

20 plated brass lid and brackets fixed to wooden plugs with Nos 2.00 2080.22 4160.44

chromium plated brass screws as per specification. (Make-

Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing stainless

steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast

iron bracet and stainless steel plug including painting of

fittings and brackets ,cutting and making good to the walls

etc. all as per specification including cost of sink with all

(Make-Somany/Cera/Hindware) Nos 2.00 7222.90 14445.80

Supplying fitting fixing of cromium plated CP over head

shower rose with arm including polishing and complete as per

specification and direction of the Engineer in charge. (Make-

Somany/Cera/Hindware)

Supplying all labour and T&P for fixing CP Concealed stop

cocks polished bright confirming to IS:781-1995 of the

following nominal sizes as per specification all complete.

(Make-Hindware/Cera/Somany)

Supplying all materials,labour and T&P for fixing Porcelain Flat

Back Stall Type Urinal respectively with waste pipe by means

of white lead mixed with chopped hemp etc. all complete as

per specification. (Make-Somany/Cera/Hindware)

Supplying all materials,labour and T&P for fixing Drinking

25 Water Purifier Stall Type etc. all complete as per specification. Each 0.00 74222.00 0.00

(Make-Aquaguard/Kent or Equivalent Brand)

Fixing standard size Chromium Plated brass or glazed

porcelain Toilet paper holder fixed to woden plugs with

26 Chromium Plated brass screws complete as per specification Each 1.00 1397.95 1397.95

and direction of the Engineer in charge. (Make-

Hindware/Cera/Somany)

Total Rs. 312066.56

Digitally signed by JAYA

B. EXTERNAL P.H. & SANITARY WORK.

Description of work Unit Qnty. Rate Amount Rs.

Supplying all materials, labour, T & P and constructing Gully trap chamber

of the following inside size with 8 cm thick R.C.C. precast cover slab in

CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8)

using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM

1 (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a

floating coat of neat cement including fixing 100mm x100mm size gully

trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing,

specification and direction of Engineer-in-charge.

250mmx250mm with RCC cover Each 4.00 1913.72 7654.90

Constructing inspection chamber with R.C.C top slab in (1:2:4) mix,

foundation concrete (1:3:6), inside plaster 12mm thick with cement mortar

(1:3) finished with neat cement punning, 12mm thick outside cement

plaster (1:3), brick work with K.B bricks having crushing strength not less

than 75kg/cm ² with dimensional tolerance ± 8 percent in cement mortar

(1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips,

earthwork in excavation in all kinds of soil and refilling the cavity around

the chamber complete as per specification.

Inspection Chamber inside size 750mm x 750mm and 450mm Each 2.00 15638.54 31277.08

Supplying all materials,labour and T&P for laying in trenches unplasticized

PVC pipes and specials of the following outside dia. for all classes

3 including jointing with approved solvent cement by non-heat application

method including testing as per specification and direction of Engineer-in-

charge etc. all complete. [including earth work and cost of pipes.

a) 110 mm dia U-PVC pipes Class-3 mtr 30.00 1203.36 36100.92

b) 160 mm dia U-PVC pipes Class-3 mtr 2845.45 0.00

Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation

concrete (1:3:6), inside plaster 12mm thick with cement mortar (1:3)

finished with neat cement punning, 12mm thick outside cement plaster

(1:3), brick work with K.B bricks having crushing strength not less than

75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5),

cement concrete (1:2:4) finished smooth using 12mm size h.g chips,

earthwork in excavation in all kinds of soil and refilling the cavity around

the chamber complete as per specification.

a) Plain Manholes inside size 900mm x 800mm and 450mm deep each 0.00 20767.53 0.00

Constructing RCC soak way pit with R.C.C top slab in (1:2:4) mix, inside

plaster 12mm thick with cement mortar (1:3) finished with neat cement

punning, 12mm thick outside cement plaster (1:3), brick work with K.B

6 bricks having crushing strength not less than 75kg/cm² with dimensional

tolerance ± 8 percent in cement mortar (1:4), cement concrete (1:2:4)

finished smooth using 12mm size h.g chips, complete as per

a) RCC soak way pit of size 1.5m x 1.8m deep each 1.00 11113.12 11113.12

1 Earth work in excavation in foundation trenches, column foundation, pit,

etc in all kind of soil including moorum stony earth and earth mixed

with boulders except sheet rock and boulders not requiring blasting

including dressing of sides and levelling the bed up to the required depth

and depositing the excavated materials away from the work site with initial

lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if

required) with cost of labour, labour cess, hire & running charges of all

machineries, sundries & T&P required for the work complete as directed

by the Engineer in charge.

2 Supplying and filling with sand in foundation and plinth in layers not

exceeding 20 cm in depth, well watered and compacted , top surface

dressed and levelled to proper level and gradient including cost of all

materials, conveyance,royalties, loading, unloading, cost of all labour,

T&P, etc. all complete as per the direction of Engineer-in-Charge.

Digitally signed by JAYA

Description of work Unit Qnty. Rate Amount Rs.

3 Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand :6

stone agregate 40mm nominal size) as levelling course in foundation and

plinth etc. including tempering, curring, shuttering etc. complete all depth

4 Providing, lifting, hoisting and laying in position machine batched ,

machine mixed and machine vibrated design mix cement concrete of M-

20 Including the cost of Centering and Shuttering (minimum cement

content not less than 347 Kg/Cum) grade in reinforced cement concrete

structural elements using black hard crusher broken granite chips of

approved quality from approved quarry including mixing and

compacting to proper shape and size, level and plumbs and finishing

the exposed surfaces smooth including the cost of all materials, cost

of labour, conveyance,loading, unloading, royalties, watering and curing

for the required period, T&P , hire & running charges of concrete mixer

and vibrator, cost of Admixtures in recommended proportions ( as per IS

9103 ) to accelerate, retard setting of concrete, improve workability

without impairing strength and durability etc. complete as per the direction

of the Engineer-in-charge but excluding the cost of steel reinforcement.

5 Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL

/TATA /RINL) of required diameter and approved quality for

Reinforced Cement Concrete work including straightening, cutting,

bending, binding, welding(if approved) , joining (if necessary), tying the

grills, hoisting, lowering and placing in position as per the approved design qtl 8.50 10388.70 88262.36

& drawings (BBS) with provision of standard fan hooks including the cost

of all materials, cost of all labour, conveyance, loading, unloading, cost of

binding wires of 18 to 20 gauge, T&P, etc, all complete as per the

direction of Engineer-in-Charge.

6 12mm thick C.P.(1:4) with neat cement punning.. complete as per the

direction of the Engineer-in-charge.

Constructing manholes with RCC top slab in RCCM20, foundation

concrete (1:3:6), inside & ouside plaster 12 mm thick cement mortar (1:4)

finished with neat cement punning, brick work with flyash brick having

crushing strength not less than 75kg/cm² with dimensional tolerance

±8 percent in cement mortar (1:5) cement concrete (1:2:4) finished

smooth using 12mm size h.g chips, earthwork in excavation in all

kinds of soil and refilling the cavity around the chamber complete as

7 per specification.

Digitally signed by JAYA

Internal Electrical Works

Sl No Item Details Unit Qty Rate Amount

A Sub-Head I (Modular Wiring Items)

Recessed wirring to light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor of ISI marked Make with 20 mm dia HMS FRLS PVC

conduit ISI marked Make 6A modular type (anti bactorial &

flame retradant type) switch ISI marked Make-

Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic

(vision) and ceiling rose ISI marked of modular type G.I box

with metallic cover plate (both side) (anti bactorial & flame

retradant type) Make-Schneider(Zencelo)/legrand( Myrius-NEXT

GEN) /Panasonic (vision) of suitable size, modular box with 1.5

sq. Mm FRLS PVC insulated single core multistandard copper

conductor as earth wire including all accessories and connection

as per direction of Engineer -in -Charge. . All the switches &

sockets should be warrantied for a replacement period of 2

years against defects with ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free after sales service within warranty period

for acceptance of materials.

Supplying ,fixing of 6A Plug on the same board in existing

switch board with complete fitting by 01 no of 6A switch &

socket (modular type)( (anti bactorial & flame retradant type))

& other required accessories of ISI marked as approved as per

direction of Engg. -in -Charge.(Maximum 02 nos point in one

circuit).All the switches & sockets should be warrantied for a

replacement period of 2 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with

complete fitting by 01 no of 6A switch & socket(modular type)(

(anti bactorial & flame retradant type) with suitable size

modular box & cover(anti bactorial & falme retradant type)

including supplying of all required accessories of ISI marked

as approved as per direction of engg-in-charge.(Maximum 02

nos point in one circuit).All the switches & sockets should be

warrantied for a period of 2 years against manufacturing

defects against which ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free aftersales service within warranty period

for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with

complete fitting by 01 no of 16A switch & socket(modular

type)((anti bactorial & flame retradant type)) with suitable size

modular box & cover(anti bactorial & flame retradant type)

including supplying of all required accessories of ISI marked

as approved as per direction of engg-in-charge. GEN)/Panasonic

(vision) (For equipement power)All the switches & sockets

should be warrantied for a replacement period of 2 years

against defects with ncessary test report & Warrnaty certificate

to be submitted to the department for genuinity of product & to

avail free aftersales service within warranty period for

acceptance of materials.

Digitally signed by JAYA

Sl No Item Details Unit Qty Rate Amount

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of mentioned

2.a) size as required as per direction of Engg.-in-Charge. 2 nos Mtr 300.00 185.26 55578.00

single core 1.5 sq. mm copper wire for phase and neutral and

01 no of single core 1.5 sq. mm copper wire for earth continuty

conductor. In 20 mm dia non metallic heavy duty conduit (LDB

to LSB/LIGHT CKT)(2X1.5+1X1.5)

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of mentioned

size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as

required as per direction of Engg.-in-Charge.

2 nos single core 2.5 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

continuty conductor in 20 mm dia non metallic heavy duty

conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT )

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of mentioned

size as required as per direction of Engg.-in-Charge. 2 nos

single core 4 sq. mm copper wire for phase and neutral and 01

no of single core 1.5 sq. mm copper wire for earth continuty

conductor in 20 mm dia non metallic heavy duty conduit .(PDB

to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable in recessed HMS FRLS PVC conduit of mentioned

size as required as per direction of Engg.-in-Charge. 2 nos

single core 6 sq. mm copper wire for phase and neutral and 01

no of single core 2.5 sq. mm copper wire for earth continuty

conductor in 25 mm dia non metallic heavy duty conduit

.(LFDB TO LBDB/UBDB) (2X6+1X2.5)

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR

KABLE/KEI in recessed HMS FRLS PVC conduit of

mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal

as required as per direction of Engg.-in-Charge.

4 nos single core 6 sq. mm copper wire for phase and neutral

and 02 nos of single core 4 sq. mm copper wire for earth

continuty conductor in 32 mm dia non metallic heavy duty

conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4)

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLS insulated, copper conductor, single

core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR

KABLE/KEI in recessed HMS FRLS PVC conduit of

mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal

f) as required as per direction of Engg.-in-Charge. Mtr 523.92 0.00

4 nos single core 10 sq. mm copper wire for phase and neutral

and 02 nos of single core 6 sq. mm copper wire for earth

continuty conductorin 32 mm dia non metallic heavy duty

conduit .(LFDB TO FLOOR PANEL TO TPN BDB power)

Digitally signed by JAYA

Sl No Item Details Unit Qty Rate Amount

Supplying and installation of 25A AC starter Modular type,

Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod

Box of suitable size including modular coveras required as per

direction of Engg.-in-Charge .All the Components should be

3 warrantied for a replacement period of 2 years against defects Nos 4.00 738.68 2954.72

with ncessary test report & Warrnaty certificate to be submitted

to the department for genuinity of product & to avail free

aftersales service within warranty period for acceptance of

Supply and fixing CALL bell (Ding dong type) /Buzzer on the

existing switch box/cover as required as per direction of Engg.-

in-Charge.All the Components should be warrantied for a

4 replacement period of 2 years against defects with ncessary Nos 2.00 251.34 502.68

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

service within warranty period for acceptance of materials.

S/F of Bakelite angle holder/batten holder (make-

Anchor/Havells or equievalant reputed make A catagory ISI

marked as approved )of ISI marked conforming to IS-

1258/1987 in place of ceiling rose as per direction of Engg.-in-

Charge .All the Components should be warrantied for a

replacement period of 2 years against defects with ncessary

test report & Warrnaty certificate to be submitted to the

department for genuinity of product & to avail free aftersales

S/F of 5within warranty

step type period

Modular for acceptance

electronic of materials.

Fan Regulator ISI Marked

5 with all connection complete in all respect as per direction of Nos 10.00 441.32 4413.20

Engineer in charge

B Sub-Head II (Light fitting Fixture & Fan)

Supplying, installation, of exhaust fan of heavy duty 300 mm

sweep 1400 rpm with louvers of exhaust fan in the existing

wall, including fixing & conntection as required as per direction

of Engg.-in-Charge. Replacement Warranty will be 2 years.

Supplying, installation, of exhaust fan of heavy duty 380 mm

sweep 1400 rpm with louvers(Make-

2 Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the Nos 4343.58

existing wall, including fixing & conntection .as required as per

direction of Engg.-in-Charge. Replacement Warranty will be 2

Supplying, installation, testing and commssioning of 1200 mm

sweep white/milky colour BLDC ceiling fan with aluminium

blades having wattage not more than 28W and air delivery ≥

215m3/min Make-Crompton Energion Groove /Havells

3 Efficiencia Neo/Usha Technix ) including wiring the down rod Nos 10.00 4394.32 43943.20

of standard length (upto 30 cm) with 1.5 sq mm PVC insulated,

copper conductor, single core cable etc. as required as per

direction of Engg.-in-Charge,Replacement Warranty will be 4

years.(With fan Regulator)

Supplying and fixing of Energy efficient Recess /Surface

mounted square/round shaped LED luminaire made up of CRCA

powder coated sheet steel of not more than 36W and system

lumens output not less than 3600 lumens (100 lm/ wt) with

diffusers for better light transmission and pure effect with High

luminous flux LEDs for better light output, CRI not less than 80,

CCT of 5700-6500 degree K, THD less than 10%,internal surge

4 protection of 3 KV, complete with Non integrated isolated No 9.00 3164.76 28482.84

electronic driver (protects the output /secondary side from any

disturbance on the input / primary side ensuring safe

operation)and all other accessories suitable for operation

on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (2 years

warranty)supply .as required as per direction of Engg.-in-

Charge. The luminaire must be Replacement Warranty will be 2

Digitally signed by JAYA

Sl No Item Details Unit Qty Rate Amount

Supplying and fixing of Energy efficient surface /recess

mounted square /round shape 18 W LED luminaire of

dimension of consists of white powder coated , die-cast

Alluminium housing with high quality frosted diffuser for glare-

free uniform lighting distribution with wattage not more than 18

5 watt and lumen output of 1800 lumens, , CRI not less than Nos 13.00 1817.20 23623.60

80,CCT of 6000 degree K,THD less than 10%, with electronic

driver, internal surge protection of 3 KV , L70 B50: 50000 hrs

and all other accessories suitable for operation on 220 V to 240

V supply as required as per direction of Engg.-in-Charge.The

luminaire should be Replacement Warranty will be 2 years

SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not

more than 20 watt and lumen output not less than 2000 lumen

6 complete with electronic driver and all other accessories with Nos 16.00 859.04 13744.64

diffuser having 2 years warranty i/c connection etc as required

as per direction of Engg.-in-Charge. The luminaire should be

Replacement Warranty will be 2 years .

SITC of Sleek LED 10 watt mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser,above

wash basin complete with all accessoriesetc. directly on wall,

including connection with 1.5 sq. mm FRLS PVC insulated,

copper conductor, single core cable and earthing etc. as

required as per direction of Engg.-in-Charge.

(Make: Panasonic/LT/Havells /Philips/Wipro

/Crompton/Bajaj)The luminaire should be Replacement

Supplying andbe 2 years

fixing extra conduit down rod of 20 cm length

G.I. pipe 15 mm dia, heavy gauge including painting etc. as

8 requiredas required as per direction of Engg.-in-Charge . Nos 10.00 38.94 389.40

(Note : More than 5 cm length shall be rounded to the nearest

10 cm and 5 cm or less shall be ignored)of ISI mark as

C BDBS,DB,AC DB,FLOOR PANELS,MCBS

Supplying and fixing of following mentioned way, three

pole/single pole and neutral, sheet steel,double door MCB

distribution board, 415 volts/240 volts shall be as per IEC

61439-3,integrated door earthing system offering additional

safety to the user,High quality polyurethane Gasket,the box and

cover shall be fabricated to withstand IK09,the DB should be

1 properly pre-treated with 7 tank process and duly powder

coated, phosphatized with powder coated finish, on

surface/recess, complete with terminal blocks,with suitable size

FR PVC insulated copper conducter up to terminal blocks, tinned

copper busbar, neutral busbar, earth bar, din bar. as per

direction of Engg.-in-Charge. The Distribution boards should be

Replacement Warranty will be 3 years.

4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC

61439-3 suitable for Flush mounting and Surface mounting with

a) 100A Copper Bus Bar for each phase, with neutral Bus bar, Nos 1.00 5038.60 5038.60

Earth Bar & Cable ties for cable management, prefitted masking

sheet, IP43-IK09 with metal door Warranty on DB is 3 years

2+4 way MCB Enclosure DB (GLAZED door)(only each EM.

CONNECTION UPS LOAD)Warranty on DB is 3 years

8 Way(8+24) Way TPN MCB DD DB Horizontal Type suitable for

Flush mounting and Surface mounting with 100A Copper Bus

d) Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties Nos 1.00 7265.26 7265.26

for cable management, prefitted masking sheet, IP43-IK09 with

metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER

LOAD)Warranty on DB is 3 years

Digitally signed by JAYA

Sl No Item Details Unit Qty Rate Amount

Supplying and fixing 20 amps rating, 240 volts, C series,10KA

breaking capacity, Double poles MCB of in the existing MCB DB

complete with connections as per direction of Engg.-in-Charge.

.Warranty on MCB is 3 years.

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C

series,10KA breaking capacity, single poles MCB. the existing

MCB DB complete with connections as per direction of Engg.-in-

Charge. .Warranty on MCB is 3 years.

Supplying and fixing 40 Amps rating, C series,10KA breaking

capacity,4P, 415 volts, MCB in the existing MCB DB complete

4 with connections, testing and commissioning etc. as required as Nos 2.00 3499.88 6999.76

per direction of Engg.-in-Charge.The MCB should be

Replacement Warranty will be 3 years..

Supplying and fixing 40 Amps rating,C series,10KA breaking

capacity, 4P, 415 volts, RCCB 30mA in the existing MCB DB

5 complete with connections, testing and commissioning etc. as Nos 2.00 6182.02 12364.04

required as per direction of Engg.-in-Charge. . The MCB should

be Replacement Warranty will be 3 years.

Supplying and fixing 25Amps rating,C series,10KA breaking

capacity, DP 240 volts, MCB in the existing MCB DB in the

6 existing MCB DB complete with connections as per direction of Nos 4.00 1136.34 4545.36

Engg.-in-Charge. The MCB should be Replacement Warranty

will be 3 years.

Supplying and fixing 40Amps rating,C series,10KA breaking

capacity, DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-

7 Betaguard/ Schneider- Acti 9 in the existing MCB DB in the Nos 1799.50 0.00

existing MCB DB complete with connections as per direction of

Engg.-in-Charge. The MCB should be Replacement Warranty

will be 3 years.

Supplying and fixing 63Amps rating,C series,10KA breaking

capacity ,DP 240 volts, MCB Make-LEGRAND-DX3/ Siemens-

8 Betaguard/ Schneider- Acti 9 in the existing MCB DB in the Nos 1799.50 0.00

existing MCB DB complete with connections as per direction of

Engg.-in-Charge.The MCB should be Replacement Warranty

will be 3 years.

Supplying and fixing 63Amps rating,C series,10KA breaking

capacity, 4P 415 volts MCB in the existing MCB DB in the

9 existing MCB DB complete with connections as per direction of Nos 2.00 3499.88 6999.76

Engg.-in-Charge..The MCB should be Replacement Warranty

will be 3 years.

Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA in the

existing MCB DB in the existing MCB DB complete with

connections as per direction of Engg.-in-Charge.The MCB

should be Replacement Warranty will be 3 years.

D (Earthing) INSTALLATION

Supplying,installation,testing & commissioning of materials and

installation of GI earth plate 600mmx600mmx6mm thick ISI

marked with G. I. nut bolts & washers including cost of burnt

wood charcoal, salt, foreign soil, water pouring arrangements,

1 brick masonary enclosure on top with removable RCC cover Nos 6.00 7670.00 46020.00

complete with labour for excavation of pit in all kinds of soil &

rock as required and as per direction of Engineer-in-charge.The

entire earthing system should be Replacement Warranty will be

Providing and fixing 25mm x 5 mm GI strip on surface or in

2 recess for connections etc. as required as per direction of Engg.- Mtr 80.00 177.00 14160.00

Digitally signed by JAYA

Sl No Item Details Unit Qty Rate Amount

Providing and fixing 50mm x 6 mm GI strip on surface or in

3 recess for connections etc. as required as per direction of Engg.- Mtr 80.00 377.60 30208.00

E CABLING AND END TERMINATION MAIN AREA

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

grade of following size cables as per direction of Engg.-in-

a) 3.5core x 240 sq mm (2 run from TRF to Main LT Panel) Mtr 15.00 2678.60 40179.00

b) 3.5core x 120 sq mm ( DG PANEL 2 RUNS ) Mtr 10.00 1404.20 14042.00

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster

of following size cables as per direction of Engg.-in-Charge.

a) 3.5core x 95 sq mm Mtr 1144.60 0.00

a) 4core x 16 sq mm Mtr 355.18 0.00

b) 4 core x 6 sq mm Mtr 245.44 0.00

d) 3.5core x 35 sq mm Mtr 505.04 0.00

e) 3.5core x 50 sq mm Mtr 737.50 0.00

2 LAYING OF CABLE

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1

kv grade size not exceeding 25 SQ. MM direct in ground in the

2.1 trench in one horizental formation including excavation ,sand Mtr 182.90 0.00

coushing protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1

kv grade size exceeding 25 SQ. MM but not exceeding 120

SQ. MM direct in ground in the trench in one horizental

formation including excavation ,sand coushing protection

covering and refilling the trench etc as required as per direction

of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1

kv grade size exceeding 120 SQ. MM but not exceeding 400

SQ. MM direct in ground in the trench in one horizental

formation including excavation ,sand coushing protection

covering and refilling the trench etc as required as per direction

of Engg.-in -charge.

Supplying and making end termination with brass double

3 compression gland and aluminium lugs for following mentioned

size cable.as per direction of Engg.-in-Charge.

S/I/T&Commissioning of LT indoor floor mounted cubical type

electrical main panel (for both light and power circuit) made out

by 2mm CRCA steel sheet duly derusted & painted by simens

grey powder cote paint is designed as G.A drawing. (FOR ALL

MAIN CONNECTED LOAD) BUILDING LIGHT)as per direction of

2 Engg.-in-Charge. Warrentee period of replacement of panel & Set 1.00 38637.92 38637.92

accessories must be 3 years & compelete test certificate must

be submitted along with panel board including component

list.Type 2 SPD 40kA shall be installed in the incomer.

20X10MM Separate Aluminium Earth bus bar should be

Digitally signed by JAYA

Sl No Item Details Unit Qty Rate Amount

In commer- 01 no 100A 4P MCCB 16kA, MCCB withTMR based

release with adjustable overloadwith on/off trip indication Light

load for each floor.

Busbar- 04 numbers of 200Amps 25*5mm copper bus bar

Electrolytic copper busbar duly sleeved by color coded PVC

sleeve & supported by suitable size DMC insulator.

Out going- 06 nos 40-63A 4P MCB 10kA,C series Light load to

Instrument- (i) 03 numbers phase indicating lamp with toggle

switch & HRC fuse.

Sub Total 642070.81

Digitally signed by JAYA

Sl.No. Particulars of Items Unit Quantity Rate (Rs.) Amount (Rs.)

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF WATER CHILLER ( Fountain

Delivers 60 liters of chilled drinking water an hour

• Electronic VersaFiller bottle filler and barrier free VersaCooler IIdrinking fountain

universal split-

• Built-in 100 micron strainer stops particles before they enter the waterway

• Waterways are lead-free in materials & construction

• Stainless steel top No 2.00 150000.00 300000.00

• One piece, low flow, flexible bubbler guard

- Heavy duty galvanized steel frame

• Four push pad manual activation on water cooler

- External stream height adjustment on cooler

• Universal split-level: can be installed left high and right low or right high and left

2 Supply, Installation, testing and commissioning of FLY CATCHER

Insect Killer Machine/Bug Zapper/Fly Catcher for Home Restaurants, Hotels & Offices,

Insect Control for All Common Flies Except Mosquitoes, 6 watts

Style Electric Trap

Material Plastic

Item Dimensions LxWxH 49 x 5.5 x 27 Centimeters

Item Weight 1.58 Kilograms

3 Supply, Installation, testing and commissioning of CHEST FREEZER

2-in-1 hard top chest freezers conveniently double up as chillers at the turn of a knob.

is a double lid chest freezer that comes in 800 litres capacity.

Gross Volume (Litres): 800

Dimension w*d*h (mm): 1945*757*880

Temperature Range: +2°C -20°C

Refrigerant: R 290

Defrost: Manual

No. of Lids / Doors: 2

No. of Baskets: 2

Wheels / Castors: Yes

4 Supply, Installation, testing and commissioning of DISH WASHER

Rack conveyor dishwasher with drying zone

Performance: Up to 165 / 200 Racks / h

Total length / depth: 3,700 mm / 2,100 mm

Loading area: Inlet table with sink and pre-spray unit, space for No 1.00 860000.00 860000.00

two racks, mechanical 90° inlet corner conveyor Unloading area: Mechanical 90°

outlet corner conveyor, roller table,

space for two racks

Supply, installation of storage rack of 18 swg stainless steel material for kitchen all

6 Supply, Installation, testing and commissioning of Power Inverter

Capacity- 2500 VA, Maximum bulb load- 2000 W, Sine Wave Technology

State of the art LCD display which shows real time inverter battery performance

statisticsFast battery charging: Low voltage battery charging begins from 95V and No 1.00 30187.39 30187.39

fast charging from 135V input supply

Complete safety for with protection features and alarms on short circuit, overload,

over temperature and low battery.

36 Months Warrenty

Capacity: 250 Ah,

High acid reservoir resulting in reduced need for water top-up even in extreme

environmental conditions.

HPM container with Virgin PPCP, ensures ultra-durability and acid resistance.

Warranty: 36 (Free of cost) + 24 (Pro-rata) Months

7 Supply, Installation, testing and commissioning of Air Conditioner

Supplying, installing, testing and commissioning split type variable speed inverter

technology room Air conditioning unit 2.0 TR capacity 5 Star to operate on 230V, 50

cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type No 4.00 72742.00 290968.00

complete with Refrigerants and copper condenser at position with all accessories

complete including installation & comissioning as per the directin of engineer-in-

charge.(Brand- Voltas/Hitachi/ Daikin/or equivalent)

8 AC Stabilizer for 2 ton Inverter AC (Working Range 130-280V) No 4.00 5754.00 23016.00

Digitally signed by JAYA

Sl.No. Particulars of Items Unit Quantity Rate (Rs.) Amount (Rs.)

Supply, Installation of 8 seater dinning set Stainless Steel all complete as per

instruction of EIC Dinning Table of 6seated with SS frame powder coated, ,SS Seating

powder coated, etc all complete. Dimension:- W800xD2300xH880)

Supply,Installation of dinning chair as per the approved drawing all complete as per

10 instruction of EIC. Dinning Chair Stackable with MS frame powder coated natural No 49.00 2500.00 122500.00

teak wood. (Dimensions:W60xD55xH82xSH45 cms)

Machine Made Polished Finish Corrosion Resistance Rectangular Modern Stainless

Steel Dining Table. (Dimensions: W500xD1100xH864 mm)

Table For Ticket Counter ( CCTV & LED Panel Operation )

13 Supply & fixing of signage in various places all complete No 1.00 20400.00 20400.00

Supply & fixing of led Glow Board Sqm 1.20 14632.00 17558.40

15 WaterJet Sprayer LS 1.00 5000.00 5000.00

Dome Camera (CP-URC-DC24PL3C-L-V2) 10 Nos

2.4 MP PS CMOS Image Sensor (1920 × 1080)@25/30fps, DWDR, Day/Night (ICR),

14 2D DNR, BLC, HLC, 3.6mm Fixed Lens (2.8 mm Optional) Nos 10.00 1651.00 16510.00

IR Range of 30 Mtrs., Smart IR

4 Signals over 1 Coaxial Cable, Support Built-in Mic

Bullet Camera (CP-URC-TC24PL3C-L-V2) 6 Nos

2.4 MP PS CMOS Image Sensor (1920 × 1080)@25/30fps, DWDR, Day/Night (ICR),

2D DNR, BLC, HLC, 3.6mm Fixed Lens (2.8 mm and 6mm optional)IR Range of 30

Mtrs.Warm Light Range of 20 Mtrs., Smart IR,

4 Signals over 1 Coaxial Cable, Support Built-in Mic

16 Channel video access (UVR-1601E2-I)

Supports HDCVI/AHD/TVI/CVBS/IP video inputs

16 Full-channel AI-Coding, Instastream/H.265 video compression Nos 1.00 18406.70 18406.70

Up to 8 channels video stream (analog channel) SMD Plus

Support 2 SATA HDD up to 10TB Each, 2 USB Ports

1 HDMI / 1 VGA simultaneous video output.

17 4 TB Hard Disk Seagate Surveillance For CCTV Nos 2.00 10125.75 20251.50

Cat6 Ethernet Cable/LAN Cable/Network Cable for CCTV, PC & Networking, 305 Meter

Long Cable, Best Reliability & Performance with Durable & Long-Lasting Material

19 Connectors & Fixtures LS 1.00 5000.00 5000.00

Supply, Installation, testing and commissioning of Fire Extinguisher

Portable Fire Extinguisher System Supplying, installation, testing and commissioning

of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI

marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled

valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete

with initial gas charged with carrying handle & wall mounting bracket as per direction

of Engineer-in-charge.

Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6

kg capacity including cost of all material & labour etc complete.

Fire buckets round bottom type enamel painted, white inside & Red out side and

Letter "FIRE" in black out side and handle with mounting bracket.

Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow

23 Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The No 4.00 916.00 3664.00

size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts

Sub Total 2422400.00

Digitally signed by JAYA