SITC of Walk in Cooler

Supply-Delivery, Installation, Testing & Commissioning of Walk-in-Cooler for Drug Store with the following specifications - [Make: Bluestar/ Carrier/ Daikin/ Hitachi]

General Specifications: Application: Storage of medicine and vaccine External Dimensions (L x W x H): 13.5 ft x 13.5 ft x 8.5 ft Internal Dimensions (L x W x H): 13 ft x 13 ft x 8 ft Required Room Temperature: +2°C to +8°C Ambient Temperature: Up to +45°C Operation Time: 24 hours Product Inflow Rate & Temp: Normal flow, at +2°C to +8°C

Insulation and Panels: Wall/Ceiling/Floor Insulation: 60mm thick PUF (Polyurethane Foam) Panel Lamination: Inside – SS 304; Outside – PPGI Insulation Type: CFC-Free, Cyclopentane-blown Green PUF Panels Density: 40–42 kg/m³ Thermal Conductivity: < 0.02 kcal/m²·hr·°C Compressive Strength: ≥ 1.3 kg/cm² Closed Cell Content: ≥ 95% Water Absorption: ≤ 2% Vapor Permeability: < 2% Fire Resistance: Self-extinguishing in absence of flame

Flooring: Construction: 60mm PUF + 6mm Marine Ply + 1.2mm Aluminum Checkered Plate Door: Clear Opening Size: 34” x 78”, 60mm PUF Insulated Features: View port: 12” x 12” with heating Heater for defrost Heavy-duty lift hinges Airtight gaskets, Posi-seal closer Safety release from inside SS 304 inside & PPGI outside lamination

Refrigeration System: Type: Air Cooled Refrigerant: R-404A (CFC-Free) (precharged) Cooling Capacity: 40,000 BTUH (2 units of 20,000 BTUH each; 1 working + 1 standby) Defrost System (IDU): Air defrost Defrost System (Door): Electric heater Compressor Type: Scroll type IDU Casing: SS-304; Fan: 85W x 4 nos, Total CFM: 3200 CDU Casing: Powder-coated GI; Fan: 187W x 1 no Heat Exchanger: Copper coils with aluminum fins Copper Pipe (Liquid/Gas): Supply & Fixing each up to 25mtr length or as required

Electricals: Power Supply: 400V (+/-10%)/ 3Ph / 50Hz Lighting: 18W LED Moisture-Proof (to maintain proper illumination level) Power Cable (Copper) : Supply & Fixing 5 core (3P+N+E) 4 sq. mm. upto 25mtr or as required.

Monitoring and Controls: Temperature Controller: Microprocessor-based with HP/LP & High/Low Temp Indicators HACCP log, print feature, Modbus for remote monitoring IoT Monitoring Device: GSM/LTE Connectivity Battery backup ≥ 4 hours Real-time monitoring of temp, door status, and power IP64-rated enclosure Temperature Data Logger: USB type with ≥ 16,000 memory points Control Cable (Copper): Supply & Fixing 4/6/8/or as per OEM standard upto 25 mtr or as required

Safety & Accessories: Alarm: Dual temperature alarm for high/low notifications Safety Door Latch: Swing type with internal emergency release Cold Room Racking: Material: SS 304 Size: 900mm (W) x 450mm (D) x 1820mm (H) Structure: 5 shelves, 4 compartments Rubber socket below legs for protection.

[All parts should conform to the relevant IS & IEC standards] [Warranty: 24 months Comprehensive Warranty on complete product, including all spare parts and additional 36 months warranty on the compressors and PCBs]

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) The Agency must procure the materials for the Manufacturer / OEM or from their authorized sales channel, so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. iii) Documents that authenticate such procurement from the manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. iv) If any refurbished material is supplied and installed, penal action will be taken as per existing rules.