Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC | L1 | Accepted-AOC Lowest BIdder | |
| 2 | L2₹34.3 L+₹34,525.45 (1.02%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹34.7 L+₹74,431.20 (2.19%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹38.1 L+₹4.1 L (12.0%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
GE NASIRABAD 305601 (RAJ)
SPL REPAIRS WORK FOR OR LINE BLDG No. T-14, T-16, T-17, AND T-18 OF FD WKSP EME (ENGR BDE), ADDN/ALTN SPL REPAIR TO BLDG No. 23 JCOs SINGLE LIVING ACCN OF 914 LT AD REGT(SP) WKSP AND OR LINE BLDG No. BC T 9-12 AND BC T-16-18 OF FD WKSP EM
2023_MES_601239_1
8329/E8
Open Tender
Civil Works
Item Rate
183 days
NASIRABAD
AS PER NIT
6 documents required · 6 mandatory
₹500
GE NASIRABAD
₹97,000
Yes
17 Aug 2023
5 Jun 2023
10 Jul 2023
5 Jun 2023
8 Jul 2023
24 Jun 2023
5 Jun 2023 - 12 Jun 2023
Amount
Taking down cement or cement lime plaster on stone/brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M& L for 15 mm thick rendering in cement mortar (1:6) on stone masonary surfaces finished fair and even complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed.
BLANK
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper (OBD) of approved shade/tint over a coat of primer over & including 1mm thick finished coat white wall care putty all as specified & as directed.
M & L for preparing new surfaces (plastered/ rough cast plastered) of walls and applying two coats of cement base paint over a coat of cement primer.
Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.
M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm wide white marble strip in border as directed by Engr-in- charge, including rubbing and polishing complete all as specified.
M & L for kota stone slab 20-25mm thick in riser, skirting, and pillar laid over & incl cement screed base 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & incl necessary bull nosing complete all as specified and as directed by the Engineer-in-Charge
BLANK
M&L for glazed ceramic colour tiles in vertical surface 300mm x 450mm x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick CM (1:4) as in backing coat all as specified & directed.
M&L for non skid ceramic coloured tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade the tiles over 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, 7 to 8mm thick in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade the tiles over 10mm thick plaster in CM 1:4 complete all as specified and directed.
M&L for 25mm thcik PCC (1:2:4) type B-0, using 12.5mm garded aggregates as in base concrete to floor finish all as specified and directed.
Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.
M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge
All as item No. 16.00 above but except stone.
M & L for brickwork with fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm complete all as specified and as directed by the Engineer-in-Charge
M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed by the Engineer-in-Charge
Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.
S&F in repair vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and as directed.
S&F in repair vitreous china wash hand basin white flat, back of size 550mm x 400mm including 32mm CP waste coupling and PVC waste down pipe and bracket complete all as specified and directed.
S & F of vitreous China urinal, flat back, half stall type white/ ivory colour with grating and Union for discharge pipe. Including connection to flushing pipe and outgoing waste pipe complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair 10 ltrs capacity dual made PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets low level flushing cistern and connections to pipes and incl suitable flushing pipe for connection into WC, if any all as specified. complete all as specified and as directed by the Engineer-in-Charge
S & F in repair of 15mm bore, 450mm long PVC connections with two nos PTMT nuts complete all as specified and as directed by the Engineer-in-Charge
S & F in repair chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.
S&F in repair tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as sped & directed.
S & F in repair 15mm bore stop valves/angle cock, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge
S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.
Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
All as per srl item No. 32.00 above but 20 mm bore
All as per srl item No. 32.00 above but 25 mm bore
S & F 15mm bore dia tubes medium grade galvanised, with all necessary fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S & F 20mm bore tubes medium grade galvanised, with all necessary fitting and fixed complete to wall and ceiling or laid in trenches complete all as specified.
S & F 25mm bore tubes medium grade galvanised, with all necessary fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
Fixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc.
All as per srl item No. 38.00 above but 20 mm bore
All as per srl item No. 38.00 above but 25 mm bore
S&F CI Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as in repairs.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm Each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) all as spd and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm Each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.
S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. Note :- The rates include for filling of PCC 1:3:6 type C-0 in frame
S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. Note :- The rates include for filling of PCC 1:3:6 type C-0 in frame
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge
Supply and fixing of 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, panelled shutter (Three panels) with panels of 9mm thick BWR grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-303. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.
S & F IInd Class HW 35mm thick glazed and skeleton factory made shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats complete all as per specified and directed.
S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.
S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engineer-in-Charge
S&F aluminium anodised handle 150mm long fabricated type complete all as specified and directed.
S & F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge
S & F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by the Engineer-in-Charge
BLANK
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge
M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified.
S&F plain/figured sheet glass ordinary quality 3mm thick fixed with oil putty size of glass n exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as spd & directed.
Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltr but n.exc 1000 ltrs capacity Each complete all as specified and directed
Supply and fixing 1000 Litre capacity rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
S & F 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.
S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as spd & directed.
Taking down CI/PVC pipe 100/75 mm fixed in wall or laid in floor etc including accessories complete all as specified and directed.
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps complete all as specified and as directed by the Engineer-in-Charge
S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps complete all as specified and as directed by the Engineer-in-Charge
S & F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified
S & F 110mm bore PVC (SWR) bends / shoe of any radius with oval access door, complete all as specified
S & F 110mm bore PVC (SWR) vent cowl, complete all as specified
S & F 75mm bore PVC (SWR) bends of any radius with oval access door, complete all as specified
Dismantling Asbestos Cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified & directed.
S&F mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade ST-240 complete all as specified & as directed.
S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ Lor J type hook complete all as specified & directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ Lor J type hook complete all as specified & directed.
Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge.
BLANK
Dubbing out average 10mm thick in CM 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified.
M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed
Demolition of stone slabs & tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.
M & L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all specified and directed
M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand, tank staging including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 complete all as specified and directed.
S&F Stainless steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.
Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.
M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface surfaces mixed with WPC as per manufactureres instructions, finished even and smooth (without using extra cement) complete all as specified and as directed by the Engineer-in-Charge.
M & L for roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) film protected from both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg / Sqm applied with bonding material using blown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.
M & L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.60 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion Without using extra cement, complete all as specified and directed.
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M& L for 15 mm thick rendering in cement mortar (1:6) on stone masonary surfaces finished fair and even over and including dubbing coat ( if required) complete all as specified and directed.
M&L for rough cast plaster mixed with crushed stone (6-10mm ) sand and cement in the ration 1:1:1, over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as spd and directed.
M&L for preparation of steel and iron surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified.
M&L for PCC (1:2:4) type B-0, using 12.5mm garded aggregates mixed with water prroofing compound as in levelling course over RCC Roof surfaces complete all as spd and directed.
M&L for flush shutter 30mm thick solid core construction with block board and plywood face panels commercial type on both side and both faces covered with approved pattern decorative coloured laminate type-1, 0.90mm thick and all around covered with 10mm thick 1st class hard wood lipping duly polished complete all as spd and directed.
S&F 100mm long double legged door stopper of aluminium alloy body fixed on door complete all as spd and ditected.
Supply only Integral water proofing compound complete all as spd and ditected.
M & L for rendering 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces , in ceilings, finished even and smooth without using extra cement,complete all as specified and as directed by the Engineer-in-Charge.
M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed
M&L for preparation of new concrete surfaces of Kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint, alternate in black & white tint, all as specified & as directed.
Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc.and getting out in any type of soil, complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil, complete all as specified & directed.
M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
S&F salt glazed stone ware drain pipes of 150mm bore, grade `A’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified.
M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to SGSW drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.
BLANK
M & L for 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded aggregate , as in sub base. complete all as specified and as directed by the Engineer-in-Charge
M&L for factory made 60mm thick machine pressed precast cement concrete coloured, reflective type interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:4, complete, all as directed.
Dismantling timber scantling framed/unframed of any section and in any position complete all as directed by Engr-In-Charge.
supplying and spreading in trenches dry river sand cusioning to underground cable in trenches including spreading, levelling hand punning down complete all as spd and directed. Note : Depth of sand cushioning will be measured after punning down and levelling the sand properly.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as spd and directed.
Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc.
M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box of, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick sheet with bakelite laminated sheet top cover 3 mm thick( Make - Hylem/Anchor) ISI Marked, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed
One light point/bell point controlled by one, one way 5 Amp SP switch.
One ceiling fan/exhaust fan point controlled by one, one way switch.
One 5 pin 5 Amp socket on same board with other switches.
One 5 pin 5 Amp socket on independent board with other switches. .
All as per item No. 114.00 here-in-before but with 2.5 Sqmm cross sectional area electric cable, for one 5 pin 15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth with all accessories complete with all specified and as directed by Engr-in-Charge.
S&F Switch piano, flush type, single pole, one way, 6/10 Amps, 240 volt, 50Hz, AC, complete all as specified and as directed by Engr-in-Charge.
S&F switch piano flush type 16 amps, single pole one way 240 volts complete all as speciied and directed by Engr-in-Charge.
S&F Socket outlet 6 Amp , 2/3 pin combined flush type complete all as specified and directed by engr-in-Charge.
S&F socket out let 2 in 1, multi purpose 6 Amp/ 16Amp 2/3 pin combined flush type complete all as speciied and directed by Engr-in-Charge.
S&F ceiling fan regulator electronic flush , steped type (four step) 230 Volts AC 2 module complete all as speciied and directed by Engr-in-Charge.
S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as speciied and directed by engr-in-Charge.
S&F of lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand
S&F LED tube light fitting in acrylic linear tube (1x 20 watt),230V for single LED tube light including 1 x 20 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.
S & F LED mirror light fitting 1X10W, attractive wall/ ceiling mounted type with mettalic channel and white reflector, suitable for mirror light fittings with complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED lamp 9/10 watt suitable for 230 volts , 50 Hzs, B-22 base complete all as specified and directed.
S & F LED light fitting 1X10W bulkhead luminaires IIP 65 protection including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
Supply and fixing testing and commissioning energy saving street light luminaire 35 watt LED , aluminium pressure die cast housing with tughened glass cover with individual LED lence , IP 66 protection complete all as specified and directed by Engr-in-Charge.
S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be of same make.
Taking down existing ceiling fan , dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan.
S & F MCB SPN, 240 volt, 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge.
S & F MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge.
S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge.
Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in electrical plate No. 3 of SSR Pt-I of 2009 incl dismanteling of old unsv existing earthing and connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engr-in-Charge.
Supply , laying and testing 1100 volt grade heavy duty cable XLPE insulated , armoured cable with stranded aluminium conductor of size 10 Sq mm 2 core including taking down old unsv cable complete all as specified and diected.
Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches fixed on pole/ on wall for cable protection complete all as spd and directed.
Supply and laying of bricks locally available sub class ‘B’ bricks, non modular sizes as per IS 1077 : 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed.
S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 4 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be of same make.
S & F MCB TPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge.
S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) complete, all as specified and directed.
S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200 Copper winding of sweep 300mm complete all as specified & directed.
Supply and fixing street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed.
S&F storage type water heater (Geyser) electrical operated capacity 25 litres, BEE 5 star rated, 240 Volts, input 2 KW , puff insulated fitted with stainless inner cantainer and copper coil of BEE 5 star rating models, max working head of water 25 mtr , fixed to wall with suitable MS tower/ anchor bolts, inlet/ outlet pipes incl PVC connections grouted to wall, mounting bolt, nuts and carrying out testing for proper functioning of all as directed by Engr-In-Charge.
Supply and fixing tubes light grade GI tubing 25 mm dia with all fitting laid in trenches, fixed on pole/ on wall for cable protection complete all as spd and directed.
kirtiman traders
JWALA ENTERPRISES
MAHARANI CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .