Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC 01 18 19 ANANDVAN ROW HOUSE LAM ROAD NASHIK ROAD NASH IK ROAD SAUBHAGYA NAGAR NASHIK MAHARASHTRA 422101 | NASHIK | MAHARASHTRA | 422101 | L1 | Accepted-AOC SINCE L1 | |
| 2 | L2₹50.7 L+₹1.9 L (3.80%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
31 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DEOLALI
GE DEOLALI, 422401
COMPREHENSIVE AND DAY TO DAY MAINT OF OR JCOS OFFRS AND OTM ACCN IN THE AREA OF AGE B R CENTRAL UNDER THE AOR OF GE DEOLALI
2023_MES_621795_1
8321/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE DEOLALI
class D cat a i
8 documents required · 8 mandatory
₹500
Yes
GE DEOLALI
₹98,000
Yes
7 Mar 2024
5 Oct 2023
2 Nov 2023
5 Oct 2023
31 Oct 2023
19 Oct 2023
Amount
Note:(i) Contractor's supervisor will report on all working days along with carpeneter,plumber, mason,welder 0830 hrs at B/R Central to receive complaint for plumbing,carpenter works,masonry works,welding and to submit completion report on the same day by 1700 hrs. (ii) Printed complaint slip area wise as per format approved by Engineer-in-Charge shall be provided and maintained by contractor. (iii) Rate quoted above shall be deemed to incl the cost of T&P, equipment, saftey device etc alongwith sufficient labour to full fill the requirement to the entire satisfaction of Engineer-in-charge. (iv) Cost of labour for providing new items including replacement /Demolition/ dismantling/ taking out/down of old unserviceable item shall be deemed under respective item. (v) Cost of material shall be measured and paid separately under relevant items 2 to 212 complaint delayed morethan 48 hrs Rs1000/- recovery has been made for each complaint per day (viii) No seperate payment paid to any tradesmen and supervisor (ix) All below maint work sites will be handed over in piece meal/patches in any qty and size for execution of the work without damaging the undamaged portion as per user requirement. (x) For the emergency work like water tanks, plumbing fittings etc which effects basic needs will be advanced procured by the contractor and fixed on emergancy basis on short notice ]
Dismantling / taking down 15 mm dia bib cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or refixing old serviceable bib cocks/ stop cocks any pattern (any major parts such as jumpers brass/ spindles/ caps etc to be replace accordingly)
Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flushter carrying out minor repairs such as stopping of leakage etc and refixing the same complete all as directed.
Supply and fixing in repair bib cock PTMT standard 15 mm dia with capastan head , Make 'Prayag/Polytuf' complete male or female as reqd and as directed by Engineer Incharge
Supply and fixing in repair bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure Make Cera/hindware/parryware or Equivalent complete
Supply and fixing in repair TWO WAY bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure Make Cera/hindware/parrywarepattern or Equivalent complete
Supply and fixing in repair CP stop cock/angle cock 15 mm dia fancy type, screwed down high pressure complete. Make : Cera/hindware/parryware
Supply and fixing stop cock PTMT standard 15 mm dia with capastan head , complete male or female as reqd and as directed by Engineer Incharge Make : Prayag, Polytuf
S & F 20 mm bore stop valves, in repair cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iorn pipe or for unions and fixed completed all as specified. Make : Cera/hindware/parryware
S & F Stop Valve Concealed Type in repair 15 mm Cast Copper Alloy fancy type, Chromium plated with long shank and cup, high pressure, screwed both ends for iron pipe or for unions and fixed Make : Make : Jaquar/Roca/Kholar/Grohe
S & F in repairs Sink mixer 15mm dia, Brass Chromium plated complete all as specified Make : Cera/hindware/parryware
S & F in repairs centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified Make : Cera/hindware/parryware
S&F in repairs CP mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed. Make : Cera/hindware/parryware
Supply and fixing in repairs 15 mm bore Pillar cocks chromium plated brass with capstain head screwed down high pressure Dura pattern half turn Cat No 2001 or Equivalent complete Make : Cera/hindware/parryware
Description all as per serial No 14 here-in-before but with Swan Neck 15 mm size complete Make : Cera/hindware/parryware
S & F in repair 125mm Dia CP wall shower with arm & flange make 15 mm bore pipe complete all as specified. Make : Cera/hindware/parryware
Supply and fixing in repair Waste fittings 32 mm for WHB , brass chromium plated for glazed ware sinks, basins etc. ware sinks with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S & F PVC Connections 15 mm size with PTMT nuts of length 450 mm Make: 'Prayag' Cat Part No 323 k or Equivalent
S & F PVC Connections 15 mm size with PTMT nuts of length 600 mm Make: 'Prayag' Cat Part No 324 or Equivalent
S & F PVC Connections 15 mm size with PTMT nuts of length 900 mm Make: 'Prayag' Cat Part No 324 or Equivalent
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.Somany/Hindware/Cera
S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device.Make Somany/Hindware/Cera
S&F in repairs vitreous china rimless single piece WC of Size: 380x700x665 mm, Single Piece WC with PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and Cistern fittings, P trap-180mm complete all as specified and directed Make Jaquar cat part No ONS-WHT-10853S300UFSM or equivalent in kohlar, grohe and Roca
S&F in repair vitreous china to wall hung EWC Bowl with cistern for Extended Wall hung-WC with PP soft close seat cover, Hinges, Fixing Accessories and Accessories set WC of size: 380x630x770 mm with UF soft close slim seat cover, hinges, fixing accessories ,fixing to flushing ceistern complete all as specified and directed Make Jaquar cat part No CNS-WHT-353SPPZ or Eqvl in Kohler/Roca/Grohe
S & F in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and waste up to floor trap and fixed complete all as specified.Make:Somany/Hindware/Cera
S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge Make : Cat Part No SLS-WHT-6601 & ALD-769L250x190 of Jaquar or equivalent in kohlar, grohe and Roca
S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed.
S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.Make Jaquar/Roca/Kholar/Grohe
Description all as per serial item No 27 here-in-before but dual flush type Make 'Prayag' Cat No 502 and equvelent fixed complete all as sfd.
S & F in repair Flush Pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern and fixed all as specified.
S & F in repairs plastic water closet seat cover, white for EWC/Anglo indain, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed all as specified.
S & F in repair PVC Waste Pipe 32 to 40mm for WHB/Sink up to floor trap and fixed complete all as specified.
S&F in repair 25mm dia 1 to 1.5mm th stainless steel curtain rod with fancy type fixing brackets, stops, rollers, sides knobs etc. complete all as specified and directed by Engr-in-charge.(Note:Brackets shall be measured and paid separately)
S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately
S & F in repairs Tubular towel rail 600mm long , 20 mm dia, Brass Chromium plated complete all as specified Make : Prayag/Ess Ess/Sieko/Prima/KS
S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified. Make : Somany/Prayag
S & F in repairs Jet spray with 1.50 m tube Make 'Prayag' Cat No 522 for wash down water closet (pedestal pattern) and fixed complete all as specified
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed.
S&F in repairs galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvinised wire stapples complete all as specified and as directed.
Taking down steel rolling shutters/garage shutter exc 4.0Sqm but n exc 20.0Sqm each and refixing in same opening after repairing of hold fast, hinges, greasing,bed block/wall etc complete all as specified and directed.
S&F in repair MS Rat tail pattern/ helical doors spring 250 mm, ordinary springs including roller and roller plate welding with MS chowkhats complete all as specified.
S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.
Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.
Description all as per serial item No 40 herein before but 150 mm long
Description all as per serial item No 40 herein before but 100 mm long
S&F in repairs 150 mm long Aluminium handles, fabricated type, anodised and fixed complete all as specified
S&F for in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.
S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.
M & L in repair Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.
Description all as per serial item No50 here-in-before but frosted glass complete all as specified.
Re securing glass of any description in existing metal frames, glazed with putty/beads including removing loose/decayed putty/beads, painting/oiling one coat on rebates, grooves, re puttying and painting/oiling puttied surfaces to match existing work (New length of frame/beading/ re puttied shall be measured).
Demolition of brick work or stone/boulder masonry built in CM on cement lime mortor and removing rubbbish of out side MoD land
M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.
Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10mm thick internal plaster with ready mix plaster on brick or concrete surfaces, complete all as specified and as directed. Make/Brand : ACCs 'ACCOPLAST', C K Birla's "AEROCEN, Magic Plast, Speed Dry Mix's ' ECO PLASTER'
M&L for rendering 15mm thick External plaster with ready mix plaster on brick or concrete surfaces, complete all as specified and as directed. Make/Brand : ACCs 'ACCOPLAST', C K Birla's "AEROCEN, Magic Plast, Speed Dry Mix's ' ECO PLASTER'
M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.
M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.
S&F for in repairs brass knobs 35-40mm dia complete all as specified.
Taking up or down 15 mm Bore steel tubing and connections, including cleaning.
S&F for 15 mm Bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors.
Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors
Taking up or down 20 mm Bore steel tubing and connections, including cleaning.
S&F for 20 mm bore Steel Water Tubing 'Medium Grade' galvanised, with all fittings and fixed complete to walls and ceiling or laid in floors.
Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors
Supply and fixing in repairs PTMT Ball valves 25 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete. Make Prayag/Polytuf
Description all as per serial No 70here-in-before but 20 mm size complete
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
S&F in repair covers for PVC over head water tanks 300/500/1000 ltrs capacity (as per sample) complete all as directed.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 500 litre capacity.
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position complete 1000 litre capacity.
S&F in repairs CP bottle trap 32 mm size for WHB complete all as specified and as directed (As per sample)
S&F PTMT grating 100 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.
Supply and fixing in repairs CI lid for inspection hole of CI bend, traps Y junction T junction, etc fixed with nut and bolt, fixed as in repair including removing old nuts by drilling or welding complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for cement concrete (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.
M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring/pavement finishing the surfaces even & smooth without using extra cement.
M&L for 100mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in floors complete all as specified and as directed.
Roof cleaning on non accesseble/acceseble roof like mud/leaf/plants etc remove plants from wall/roof/chajja/drain pipes packed with PCC /plaster and match the existing colour on entire block area of the roof slab n.exc 200Sqm
Roof cleaning on non accesseble/acceseble roof like mud/leaf/plants etc remove plants from wall/roof/chajja/drain pipes packed with PCC /plaster and match the existing colour on entire block area of the roof slab exc 200Sqm nexc 500 Sqm
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl making good all disturbed portion complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl making good all disturbed portion complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
S&F for 30mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.
S&F 2nd class HW shutters 35mm thick, plain framed panelled shutter factory made (three panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and as directed.
S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.
S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.
M & L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed.
Ditto but 65x 125mm double rebate
S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified
S&F factory made 100 % solid prelaminated wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan
S & F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed
S & F 75 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed
S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm size aluminium anodized handle complete all as specified and directed
All as per above but 100 mm size complete all as specified and directed
S&F Ball bearing runners Telescopic Channel Length : 500mm (KA4632) full extension load capacity 35 kgs, Make : Item code: 9293319 of hettich or equivalent in butterfly, Hafele
S&F , Silent Hinge - 0 Crank Door Hinges with Mounting Plates & Cover Capsauto c openable at 110 degree for kitchen cabinet shutters Onsys 4447i of hetticch or equvelent to butterfly, Hafele
M&L 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed
M&L 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed
S&F for Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc, complete as specified and as directed.
S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.
S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
S&F for Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.
M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.
Dismantling & Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 250Ltrs and n exc 500Ltrs capacity complete all as specified. Incl
DismantlingCleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 500Ltrs and n exc 1000Ltrs capacity complete all as specified.
s&F of 5mmthick (ACP) aluminium composite panel sheet on wall/coloumn/roof with necessary screws complete all as specified and directed.
s&F of 3mm thick (ACP) aluminium composite panel sheet 150x150mm fixing with screws on walls up to height 10mtr incl 3 to 4 Inches size 3 to 6 letters complete all as specified and directed.
Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.
M&L for Glazed ceramic tiles of size 300x600 x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.
M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) with mirror polish complete all as specified and as directed.
All as per item No 118 above, but as in skirting over 10mm thick backing coat in CM (1:4).
M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.
M & L for 15 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.
Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish completePolishing
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
M&L for chequered cement concrete tiles 30cmx30cmx20mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.
M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.
Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.
S&F5 to 8 mm thick interlocking PVC hollow false ceiling fixed with self tapping screw over and including aluminium hollow SECTION 40MMX40MM and hanging wire of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge Make:- Placopan,Sintex
S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .
M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .
S& F urinal spreader all as specified and as directed
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
S&F in repairs Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass all as specified.
S&F in repairs only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern.
S&F in repairs spindle brass for 15 mm dia Wall mixer/CP WHB mixer/CP Sink mixer of any pattern.
S&F in repairs Capastan head / cap of CP bib tap / CP stop cock 15 mm size complete all as directed by Engr- in-charge.
S&F in repairs cap of CP Wall mixer/CP WHB mixer/CP Sink mixer 15 mm size of any pattern complete all as directed.
S&F in repairs Jumper brass with rubber or leather washer complete for 20 mm dia stop cock brass all as specified.
Taking down copper/aluminium point wirin (light, fan, socket or power) complete, includingfixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-
One Light point controlled by one switch
One light point controlled by two two way switches.
One fan point controlled by one switch
One 3 pin socket outlet. 5 Amps on the same board.
One 3 pin socket outlet. 5 Amps on the independent. board
One bell point controlled by one switch.
All as item No- 214 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.
Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .
Supply and fix switch piano flush type single pole two way 5 Amps complete all as specified .
Supply and fix Bell push button SP 5 Amp, flush type complete all as specified .
Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.
Supply and fix switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.
Supply and fix switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.
Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.
S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.
S & F Decorative wall light fixture with 9 watt LED lamp made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.
S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect.
S &F Linear & compact 10 W LED light , polycarbonate body and ribbed opal diffusere .
Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd
Supply and fix in repair sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of following sizes:-
Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed.
Supply and fix in replacement MCB SPN 32 Amps, 240 volts complete all as specified and as directed.
Supply and fix in replacement of PVC casing/caping of size 25/32 mm with all requisite accessories i.e. junction box, inner& outer corners,bends, tees,collers ,reducers etc complete all as directed.
S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.
M & L of sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals complete all as specified and directed in Existing conduits/ PVC capping- casing. Note :-(i) Two run of copper cable and one run of earth wire shall be measured as one length. (ii) If Casing- capping required at site, they will be measured and paid under respective items
Ditto all as per item No - above but with 2 runs of 4 Sqmm cable with one run of 2.5 Sqmm cable for earthing.
M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion .
S&F 25 Watt New generation energy saving and environmental friendly long life LED Security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07.
M & L for bracket made out of GI tubing 32 mm dia,light grade 1.0 mtr long including fixing with MS clamps -2 Nos made out of 25 mm wide 4 mm thick flat iron with M.S. nuts, bolts/screw -4 Nos & flat washer 01 No. for each including preparation of steel surfaces and painting with two coats of paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.
S&F New generation, post-top energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light sourceof 25 watt.
Supply and fix in repair switch socket combination 2 in 1, 3 pin 5 Amps flush type universa complete all as specified and as directed.
Supply and fix inrepairs of switch socket combination 2 in 1, 3 pin, 5 & 15 amp flush type universal complete all as specified and as directed.
S & F in repairs of lamp angle/batten holder Bakelite Pin/Retrofit type complete all as specified and as directed.
S & F in repairs switch piano flush type single pole one way 5 Amps
S&F capacitor 2.50 MFD 440V suitable for 1200/1400mm sweep ceiling fan
Supply and fix in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd
S&F PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt grade, conforming to IS 694 of size 0.5 Sqmm 2 core.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circula 10 sqmm
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circula 6 sqmm
The wood components shall be rubbed with apropriate size sand paper along the grains to remove any dust/ wax/unwanted stains from the surface. Any cracks or holes shall be filled with suitable wood filler of good quality approved by Engr -In - Charge. two to three coats of French Polish shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required.Polishing to following wooden furniture items will be also carried out in occupied Officer /Jco/Ors Qtrs and unit lines :-
Book Case :- Drg No. FD 45,FD 237
Bed W/Ply top w/o FMN FD:- Drg No. FD 246/247
Chair dining:- Drg No. FD - 279
Chair Easy:- Drg No. FD - 229
chair writing:- Drg No. FD-280/250
Chair Easy Cushioned:- Drg No. FD 358
Hat stand W/M:- Drg No. FD 233
Peg Table:- Drg No. FD-384/277
Sofa Set 5 Seater:- Drg No. FD-373/281 , 258
Table Writing :- Drg No. FD-249/275
Table Dressing Ladies W/M:- Drg No. DB 3980, FD- 45 (M), FD 378
Table dining 4 persons, 1200 mm X 900 mm X 760 mm::- Drg No. FD-273,
Teapoy:- Drg No. FD 382, DB 3675
Table Dining 6 pers:- Drg No. DB 10081 / FD -273
Table Dining 8 pers:- Drg No. FD -273
Table 900x 900 x 760 mm w/Dvr:- Drg No. FD 291, FD 283
Table Centre :- Drg No. FD 274
Table 3x2 with out drawer:- Drg No. FD 1007
Sofa Set 5 Seater set of (3+1+1) w/cushion:- Drg No. FD/MAP-II/02
Chair dining Map:- Drg No. FD/MAP-II/05
Steel furniture :- M & L for preparing of furniture items as per following steps : (i) Denting of bent surface wih the help of hammer in best workmanship manner. (Ii) Removing old paint by scubbing with apropriate size sand paper throughly (ii) Applying one coat of metal primer make: asian / dulux/ nerolac. (iv) Applying metal putty to even the surface and wait period of 2-3 hours to be given for putty to set and dry completely, Scrub off the excess putty with suitable size sand paper . (v) Wipe the surfface with soft dry cloth and apply two coat of enamel paint by means spray painting shade as approved by GE DVL / Engr - In -Charge. Make Asian (Apcolite), Berger (Luxol), Shalimar (Superlac), Painting to following steel furniture items will be also carried out in occupied Officer /Jco/Ors Qtrs and unit lines.
Almirah Large Steel w/s & w/k/Almirah Large Steel 1/2S X 1/2 H:- Drg No. FD 67, FD 1031, FD/E6/MAP/18
Almirah Med Steel w/s & w/k:- Drg No. FD 67/ FD 1031, FD 243, FD 1032, FD/E6/MAP/18
Locker Bed side steel :- Drg No. FD-1029
Teapoy Varandah :- Drg No. FD 255, 383, FD/E6/MAP/17
Shoe Rack Steel :- Drg No. FD/E6/MAP/02R
Almirah Large /Med/locker Steel, Drg No. FD 67/1031/1302/1033/1029
Removing of unserviceable lock with keys and S & F new MS Lock of size 50 mm, 6 levers with stainless steel keys in duplicate for Almirah large/Medium Steel/Locker Steel all as specified and directed by Engr - in - charge. Make : Godrej/Standard/Aligarh or Equivalet
Removing of unserviceable broken handle and S & F new handle steel chromium plated for Almirah Large/Med Steel/Locker steel all as specified and shown in drawing and directed by Engr -in -Charge.
Table Wriiting, Table dressing Ladies W/M, Side Board, Book Case, Table Bed Side
Removing of unserviceable handle and Supply & fixing new handle (all as per existing pattern) as per sample approved by GE/Engr-in-Charge
Table Wriiting, Table dressing Ladies W/M, Side Board, Book Case, Table Bed Side
Removing of unserviceable Knob and Supply & fixing new one(all as per existing pattern) as per sample approved by GE/Engr-in-Charge
Note: Amount of sch of credit of Rs.74995/-will be deducted from total amount of BOQ.
M/S YOGESH CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .