Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-AOC VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L1 | Accepted-AOC found lowest | |
| 2 | L2₹18.8 L+₹2.1 L (12.4%)Rejected-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹19.2 L+₹2.5 L (14.8%)Rejected-AOC VPO SATROD KALAN HISAR HARYANA | HISAR | HISAR | HARYANA | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹19.5 L+₹2.8 L (16.7%)Rejected-AOC | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹20.7 L+₹4.0 L (24.2%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
10 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Basoli
GE Basoli
CERTAIN REPAIR TO OFFR MD ACCN AND OTM ACCN AT JANGLOT GRN UNDER GE BASOLI
2023_MES_602826_1
GE/BAS-34/2023-24
Open Tender
Civil Works
Item Rate
180 days
Janglot area under GE Basoli
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Basoli
₹50,000
Yes
13 Sept 2023
12 Jun 2023
12 Jul 2023
12 Jun 2023
10 Jul 2023
26 Jun 2023
Amount
S&F Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified and directed by Engr-in-charge.
S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed by Engineer-in-Charge.
S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed by Engineer-in-Charge.
M&L Granite black colour of any type 18 to 20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes.
Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc
M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed by Engineer-in-Charge.
M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC board 18-20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 3.50 Kg/Sqm complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L For Glazed ceramic coloured tiles in vertical surfaces 450x300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 . All complete and as specified.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm Complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each. Complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm. Complete all as specified and directed by Engineer-in-Charge.
S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine celluar structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws all as specified and as shown on drawing.
S&F factory made solid PVC mounlded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a).
S&F Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated .
S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and as directed.
M&L For Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed by Engineer-in-Charge.
M&L For 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm Complete all as specified and directed by Engineer-in-Charge.
M&L For 1.25mm thick Pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm Complete all as specified and directed by Engineer-in-Charge.
M&L For PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats Complete all as specified and directed by Engineer-in-Charge
S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe applying two coat of synthetic enamel paint over a coat of red oxide primer.
S&F Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane all complete and as specified.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed by Engineer-in-Charge
S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed by Engineer-in-Charge
S&F For Powder Coating aluminium single or double leaf door shutter in single or two panels with standered aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make complete all as specified and directed by Engineer-in-Charge. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)
S&F For Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with double side shutters wire gauged shutter & glass glazed shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No), hinges type B-21 100mm long (4 Nos) suitable handle (4 No), tower bolt (4 Nos) complete all as specified. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)
S&F Aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg . complete all as specified and directed by Engineer-in-Charge
Demolition of Wall boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.
S & F Hollow Profile PVC Wall Lining consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site Incl Aluminium Frame, all complete and as specified.
S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate.complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel hinges medium weight cold rolled size 100mm. complete all as specified and directed by Engineer-in-Charge.
S&F aluminium handle ,cast type, anodised ,150 mm size. complete all as specified and directed by Engineer-in-Charge.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long all complete and as specified.
S&F floor stopper 150mm length of aluminium alloy body and tongue, anodised, wth hard drawn steel spring, fixed in floor.complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel handles 200mm ,cast type, anodised ,125 mm size all complete and as specified.
S&F stainless steel barrel tower bolts size 200mm all complete and as specified.
S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink
S&F in repair Stainless Steel plate rack of size 900mm x 900mm x 250mm 0.80mm thick sheet. Make: Blue Star/ Neelkamal
S&F in repair Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm
S&F Stainless Steel Kitchen Sink with double bowl of size 45x20x9 Inch, 1 mm thickness with plug washers,and waste pipes, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and connecting union to pipe complete all as specified and directed by Engineer-in-Charge
S&F in repairs 15 mm cp bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge
S&F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge
S&F in repairs CP wall mixer with Hand Shower arrangement with crutch (chrome) of 15 mm bore complete all as specified and directed by Engineer-in-Charge
S&F Bathroom Cabinet with mirror plastic strong and heavy rich look 6 selves storage organiser of size 450 x 300 mm all as specified and directed by Engineer-in-Charge
S&F chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union
S&F in repairs chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking includinf making connections and fixed in position complete in all respect as specified Make : CERA/ Hindware/ Parryware
S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed by Engineer-in-Charge
S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor etc and taking up or down steel water tubing and connection complete all as specified and directed by Engineer-in-Charge
S&F in repairs rotational moulded PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC float valve 20 mm, all as specified in SSR Part-Icomplete all as specified and directed by Engineer-in-Charge.
S&F in repair rotational moulded PVC water storage tank 500 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC float valve 20 mm, all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F in repair Vitreous china urinal Flat Back Half stall type (white) of Size 375x390x590mm minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe of Hindware or Cera mark.
S&F in repair vitreous china urinal partition white of size 310 x 700mm of Hindware or Cera mark.
S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe,
S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore
S&F PVC connection 15mm size with PTMT nuts of length 600mm.
S&F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 15 mmm bore of pipe all as specified & directd.
S&F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 20 mmm bore of pipe all as specified & directd.
S&F 20mm dia Stainless steel Curtain Rod with Brackets & Finials etc, Complete all as specified and directed by Engr-in-Charge.
S&F Stainless steel 6 Pin cloth hanger wall mounted Bathroom hanger complete all as specified and directed by Engr-in-Charge.
S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed by Engineer-in-Charge.
S&F in repairs water closet squat pattern with vitreous china white Ist quality water closet Orissa pattern size 580x440 with integral foot rest and cost iron for S trap complex.
S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.
M & L Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsion over 3mm thick wall putty complete all as specified and directed by Engineer-in-Charge
M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastred surfaces then applying two coats cement base paint on walls over a coat of white wash complete all as specified and directed by Engineer-in-Charge
M&L Rendering 10 mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and Preparation of new pastered surfaces of ceiling and applying three coats of white washing all complete and as directed
Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering all as specified and directed by Engineer-in-Charge
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement
Dismantling of PVC or cast iron pipes jointed in cement mortar and taking out upto 110 mm.
S & F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor .
S & F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor.
S & F PVC (SWR) Bends in any radius 110 mm bore with access door in repair.
S & F PVC SWR Bends in any radius 75 mm bore with access door in repair.
S&F in repair PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats.
S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified.
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word" CLEANED ON WITH DATE' with while paint including replacement of broken/unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge
M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded agg) as in sub base.
M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded agg) in plinth protection etc.laid in alternate bays all complete and as specified.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed by Engineer-in-Charge
S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed by Engineer-in-Charge
Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor .Complete all as specified and directed by Engineer-in-charge.
M& L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed by Engineer-in-Charge
M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.
M&L For 15mm thick screed in CM 1:6 in at Roof Top Surfaces for smoothening surface of laying APP Membrane and all as specified and as directed.
M&L For Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth,not otherwise described.
Supply only integral water proofing compound.
Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all complete and as specified
M&L Reinforced cement concrete 1:2:4 type B-1,using 20 mm graded stone agg as in shelves etc including form work.
M&L For TMT Steel bars 8 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge
M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastred surfaces and applying three coat of white wash complete all as specified and directed by Engineer-in-Charge.
Dismantling of ceiling asbestos cement board any thickness including cover fillites.
S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips. Make : M/s Everest, M/s Saint gobain, M/s Boral.
S & F Hollow Profile PVC ceiling consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site Incl Aluminium Frame, all complete and as specified.
S&F in repairs One piece EWC S Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed by Engineer-in-Charge. Make :- CERA/PARRYWARE/HINDWARE
M&L for cutting, grinding & polishing over terrazzo, marble/ kota stone flooring/ skirting/ dado etc., complete all as specified and directed
M&L for preparation of old decorated surfaces of walls, plasters & cornices including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of white wash evenly complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of white wash evenly complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls, plasters & cornices including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of Oil Bound Distemper (washable) complete all as specified and directed.
M&L applying 3mm thick wall care putty on new/old plastered surface and prepare the smooth surface with sand paper and applying two coats of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old decorated surfaces of wall, plasters & cornices including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of cement based paint complete all as specified and directed.
M&L For Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified.
M&L for preparation of old decorated surfaces of wood work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L For 12mm thick Toughned glass doors, automatic doors and similar work with SS mortice 65 mm 4 levers lock and alongwith stainless steel 2 nos handles of size 450 mm a including cutting to shape, drilling holes etc complete all as specified and directed. (Note : Design of glass as approved by Garrison Engineer)
Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed by Engineer-in-Charge.
Ms International Engineers
M/S RAJINDER SINGH
Ms Dalip Kumar and Co.
M/S NEERAJ ENTERPRISES
AGGARWAL ASSOCIATES
Amrik Construction co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .