CONSTRUCTION OF TRANSIT HOUSE AT BIRMAHARAJPUR IN THE DISTRICT OF SUBARNAPUR FOR THE YEAR 2025-26

Earth work in excavation of foundation, trenches/in all kinds of soil including moorum, stoney earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth & depositing the excavated materials away from the work site with all leads & lefts top shorting & strutting if required etc. complete as directed by the EIC.

Supplying and filling in foundation and plinth with sand including watering, ramming cost, conveyance & taxes materials & cost of labour with T&P required for the works etc. complete. (measurement will be taken on finished completed section only)

Cement concrete (1:3:6) in foundation and floors using 4 cm. size black hard hand broken granite metals of approved quality and from approved quarry including lowering, laying concrete watering & curing etc. complete to required level including cost, conveyance royalties & taxes of all materials & cost of all labour with T&P required for work complete.

Cement concrete (1:2:4)in all floor using 12 mm size black hard hand broken granite chips of approved quality and from approved quarry including lowering, laying concrete watering & curing etc. complete to required cost & conveyance royalties & taxes of all materials & cost of all labour with T&P required for work complete.

First floor Column superstructure

Column superstructure

Plinth beam

Lintel bend

Roof beam

Chhajja

Shalves

Staircase

Roof slab

Cutting straightening coiled or bent up MS Rods or Tor steel bending, binding welding and joining if necessary and tying the grills and placing in position as required for RCC work and of providing fan hook hoisting, lowering & laying including cost conveyance & taxes of MS Rod or Tor steel & binding wire of 18 to 20 guage required for the work for bending, binding & tying the grills (payment will be made on weight of MS Rods or Tor steel only & no separate payment will be made towards the weight of binding wires). Ground floor

Lintel bend

Chhajja

Roof beam

Roof slab

Fly ash brick masonry in cement mortar (1:6) in superstructure using of (25cm x 12cm x 8 cm) size having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections. Watering and curing for 7 days and immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per direction of Engineer in charge. Ground floor

First floor

Fly ash Brickwork with in cement mortar (1:6) in Foundation and Plinth (25mm x12cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections. Watering and curing for 7 days and immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per direction of Engineer in charge.

12 mm(½”) thick cement plaster (1:6) finished smooth to out side smooth surface of brick wall after racking out the joints including watering wall curing, etc. complete with cost conveyance royalties & taxes of all materials and cost of all labour with T&P required for the work etc. complete. Ground floor

First floor

16mm thick cement plaster (1:6) in all floors finished smooth to inside rough surface of 10 thick brick walls after rocking out the joints including watering and curing with cost conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete. Ground floor

First floor

Finishing walls with cement primer of water bound of approved shade on new work two coat to give an even shade inculding cost of primer etc complete Ground floor

First floor

20mm thick cement plaster in c.m.(1:4) with watering,curing and cost,conveyance royality of all materials & cost of all labour charges etc complete

6 mm thick cement plaster (1:4) finished smooth to out side smooth surface ofRCC work after racking out the joints including watering wall curing, etc. complete with cost conveyance royalties & taxes of all materials and cost of all labour with T&P required for the work etc. complete.

25mm thick grading concrete (1:2:4) on roof slab using 6mm size hard broken granite chips of approved quality from approved quarry including lowering laying concrete watering & curing etc. complete to required level as per direction of the E.I.C. including cost conveyance, royalty & taxes of all materials & cost of all labour with T&P required for the work etc. complete.

Supplying, fitting and fixing vetrified tile in floors of size 600mm x 600mm of approved make conforming to IS-13755 with application of polymer modified quick set cement based water registrant adhesive conforming to IS-15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T & P etc required for the work all complete as per direction of E-I-C.

Supplying, fitting and fixing vetrified tile in dado of size 600mm x 600mm of approved make conforming to IS-13755 with application of polymer modified quick set cement based water registrant adhesive conforming to IS-15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T & P etc required for the work all complete as per direction of E-I-C.

Supplying, fitting and fixing of vitrified industrial floor Tile of premium grade having thickness 8mm to 10mm conforming to IS 4457 of size 300mmx300mm of cm (1-4) width net cement slory mixing incuding fixing tiles 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, labour T & P etc required for the work all complete as per direction of E-I-C.

Supplying fitting and fixing of Terrazo Tiles over gate roof etc complete

Supplying fitting and fixing of vitrified industrial tile

Supplying, fitting and fixing of Un-Plasticised poly vinyle Chloride (UPVC)(FENESTA /NCL VKA LTD) casement door -60-series duly manufactured using UPVC reinforced profiles of 60mm x 55mmx2.5mm for outer frames , 75mmx60mm2.25mm for casement door sash Profile and 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thicknessof 2.0mm pre-fabricated & welded through fusion welding the door Sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories loke Clipping locking system made of alumium 1 no per set of sashes and the system is to be installed at the site using anchor fasteners , silicon rubber sealant , easy glazing /deglazing at site etc including cost snd conveyance of all materials ,accessories ,labour charges , materials and product conforming to ASTM D-638-14- EN-477-95 and other applicable codes and standards.

Providing and fixing factory made UPVC frame with sliding shutter for windows made of UPVC extruded section having an overall dimension,as below (tolerence ± 1mm) with all thickness 2mm ± 0.2mm .Corners of the door frame to be jointed with galvanized brackets and stainless steel screws,jointed and mitred and plastic wilded.The hinge side vertical of the frame reinforced by galvanised M.S tube of size 19mmx19mm and 1mm ± 0.1mm wall thickness and 3 nos stainless stell hinges fixed to the frame complete as per manufacture specification and direction of EIC.(Extruded section profile size 42x50mm) :MAKE :

Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. Ground floor

First floor

Painting two coats with plastic emultion paints of approved shade in all floors to wood/ iron works including sand papering, polishing the surface, cost conveyance taxes of all materials labour and T&P required for the work but including cost of paints etc, complete in all respects (paints will be supplied by the contractor of his own cost) Ground floor

First floor

Painting two coats with weather coat paint over a coat of primer of approved shade by means of brush after cleaning the surface including watering and curing etc. complete using weather coat paint to be supplied by the contractor of his own cost, including cost of weather coat paint and all materials with all taxes, royalty, labour and T&P required for the work etc. complete. Ground floor

First floor

Enamel Painting two coats with paints of approved shade in all floors to wood/ iron works including sand papering, polishing the surface, cost conveyance taxes of all materials labour and T&P required for the work but including cost of paints etc, complete in all respects (paints will be supplied by the contractor of his own cost) Ground floor

First floor

Supplying fitting and fixing W.I. grills, Grills gates, M.S. gates as per approved drawing & designed including marking holes in brick & R.C.C. structures, wood work etc. and marking good to the damages to walls with cement concrete of prop 1:2:3 with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) complete in all respects W.I. grills, gates M.S. gates screws & other required materials of approved quality will be supplied by the contractor at his own cost.

Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilators and beams , including cost of labour, mason , T & P and coal tar painting etc complete.

Supplying, fitting and fixing of 25mm thick molded door shutter with teak finished on both side of regular standard size as per approved colour, shade, design and with all cost of transportation Aluminium fixtures and labour charges for fixing in position etc. compl

First floor

ete in all respect.

Earth filling by mechanical means within 5 K.M. lead with loading including transportations with initial lead etc. complete as per the direction of the Engineer-in-charge.

Supplying and laying of pre cast inter-locking coloured concrete block 80mm thickness with crushing strength of any individual shall not be less than 40 N/Sqm as per drawing and technical specification clause 1504 of MORTH and BS specification 6717-II 1986 with all cost of material,labour,carriage and laying as per direction of EIC.

S/F of 3.5 x 35 sq mm XLPE aluminium armoured cable make (Havels/ Polycab,rr)

R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the EIC. Ground floor: Columnbase and footing

Group-B

Group-C

Supply and fixing of modular 6Amp plug with 6Amp switch on existing board (Make of Modular Switch- Schineider cripsal x /panasonic vision /Legrand arteor )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (Make of Modular Switch- Schineider cripsal x /panasonic vision /Legrand arteor )

2 x 1.5 sq.mm + 1 x 1.5 sq.mm

2 x 4.0 sq.mm + 1 x 1.5 sq.mm

4 x 10.0 sq.mm + 2 x 4 sq.mm

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (Make of Modular Switch- Schineider cripsal x /panasonic vission /Legrand arteor )

DBOXx Combo Socket with 20 /25 Amp. SP 'C' type MCB with sheet steel enclouser (Havels/L&T/HPL)

S/F of BK angle Holder modular (anchor,havells)

Supply and fixing of 9 /10 Watt LED lamp (Philips/ Havells/ Polycab)

Supplying and fixing of surface mounted LED light fitting of 15 watt ( Make- Philips /Crompton /Havels )

S/F of 1x20/18 W T5 LED batten tube light (Havels/philips /crompton)

S/F of 45 Watt LED STREET Light (Havels/CROMPTON/ Philips)

S/F of 0.5 Watt LED foot Light (Havells/anchor/ Philips)

S/F ,I.T.C of 48 " ceiling fan (crompton Aura ,crompton senorita ,cromton gianna ,havells nicola , usha bloom , luminous new york brooklyn , crompton seno prime )

Supply and fixing of Electronics step type Modular fan regulator. (Make - Schineider / panasonic /Legrand )

S/F,installation ,testing,commissioning of 12" (300 mm) exhaust fan (bajaj,havells,usha)

S/F of wire less call bell(ISI marked)

inverter wiring with 1.5 /2.5 cu wire .

S/F of inverter of (1.8 - 2.2 ) KVA with 2 NOS. Of 160 AH tall tubular battery with battery cover stand ..(Exide,luminous ,microtek)

S/F OF (4+12) way double door TPN DB with ( 1×32 /40 AMP Four pole + 12 ×( 6- 20) AMP DP/SP ) MCB (Schneider / ABB / Siemens/Legrand )

S/F OF 4 way double door DB with ( 4 ×( 6- 20) AMP DP/SP ) MCB (Schneide

r / ABB / Siemens/Legrand ) for inverter .

supply and fixing of 1.5 ton 3 star A.C machine with graphics colour design indoor . (LG / blue star / voltas / Toshiba or equivalent )

supply and fixing of 5 kva stabilizer machine (liv guard/ v-guard / luminous )

Installation of A.C. Machine.

S/F 15A.Top (Havels/Anchor / l&t / legrand )

Out Door M.S stand for A.C. Machine

supply and fixing of 10 litre water gyser . (LG / / voltas /Vguard or equivalent )

S/F of 32 amp DP switch(anchor/hpl/havells/CONA) for street light .

Providing and fixing of copper tape 25 mm x 5 mm thick on parapet or surface of wall for lightning conductor complete as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Each site

Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex /L&T / havells / polycab ) 2 x 2.5 sq.mm + 1 x 1.5 sq.mm

32mm dia PVC ASTM pipe (sch-80)

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)

15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)

15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)

25mm dia brass full way valve (Shakti make)

32mm dia brass full way valve (Shakti make)

15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)

CP Extension Piece

125mm CP grating

15mm size C.P. flange

20mm dia CP consealed stop cock ( Con-CHR-083KN Jaquar make )

WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

INTERNAL PHE: Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge gROUND FLOOR:25mm dia CPVC Pipe

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the EIC.

110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank

110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

One piece commod ( Hindware ) Element Cat No.92084

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engi

Under Counter basin (560x450)Hindware-No.10095

neer-in-charge. Fixing 580mmx440mm Orissa pan (Hindware/Parryware/Neycer make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink ( Zyna Make )

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Jaquar/ Johnson make)with 15mm dia C.P. pillar cock with pedestal

Towel ring

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail

Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of EIC.

Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge

Supplying all materials labour T&P filling sand in lavatories well watered and r

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails.

ammed including lead of materials to work site.

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type)

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of EIC. 15mm CP revolving Shower (Jaquar) CON-CHR-209KN

Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size 76cmx76cmx46cm with 18” dia RCC MH cover

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria tile 60cmx60cm Ground Floor

2.50sqmm flat cable

Granite

Supplying & fitting fixing of unplasticised Poly vinly chloride (UPVC ) (FENESTA/ NCL/ VEKA LTD) Casement Door series dully manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame

Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.

Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.

Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria wall tile 30cmx60cm Ground Floor

Steel rope with cover

Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.2x5.90 x 3.30 x 0.225

Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. 2x 4.75 x 2.15 x 0.15 =

Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.

Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.

Supplying all materials labour T&P and providing 12mm thick C.P (1:6) including watering curing and conveyance of all materials to site.(out side)

Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. Same as plaster

Ext. S/D Portion Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 150mm dia P.V.C. pipe

Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.

Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC

Cover )

1 No 50 Users septic tank of size 5.0mX2.3mX2.1m Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of EIC. 2x 5.90 x 3.30 x 1.50 =

Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.

Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore: 00 mtr to 30mtr

Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor. 4.00 x 1.40 =5.60 2(4.75+2.15) x 0.15 =2.07

Drilling of 150mm dia bore: 45 mtr to 213

Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 2x 5.90 x 3,30 x 0.30 =

30 mtr to 45mtr

Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)

DOL Control panel

40mm dia steel short piece

Well cap

50mm size CI bracket

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 200mm dia PVC pipe: 00 mtr to 40 mtrs

Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 200mm dia PVC (sch-80) pipe

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.