Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.4 LAccepted-AOC 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹17.8 L+₹2.4 L (15.5%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹19.2 L+₹3.7 L (24.2%)Rejected-Finance 12 53 CHOPASNI HOUSING BOARD JODHPUR 342 008 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹21.2 L+₹5.8 L (37.3%)Rejected-Finance AA CLASS PWD CONTRACTOR DISTT BARMER | BARMER | RAJASTHAN | L4 | Rejected-Finance Other than Lowest |
Tender Value
₹25.6 L
EMD Value
₹51,500
Closing Date
21 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (A) Jaisalmer
HQ CWE (A) JAISALMER 345001 (Raj)
SPL REPAIR TO ROAD DEPOT AREA AND PROVN OF ROAD INSIDE DBS AT MIL STN JASAI UNDER GE (A) BARMER
2024_MES_675543_1
84215/C/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
BARMER
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE ARMY BARMER
₹51,500
Yes
20 Nov 2024
20 Sept 2024
23 Oct 2024
20 Sept 2024
21 Oct 2024
4 Oct 2024
20 Sept 2024 - 25 Sept 2024
Amount
Excavation over areas not exc. 1.5 m deep and getting out in Soft/disintegrated rock complete all as specified and directed by Engineer-in charge.
Excavation over areas not exc. 1.5 m deep and getting out in any type of soil or sand dune complete all as specified and directed by Engineer-in charge.
Removing excavated soil not Exc. 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engineer-in charge.
M&L for Rolling and consolidating formation surface with 8 to 12 tonne power roller, including filling in soft spots depression etc which occur during rolling (for portion coming in cutting/ original ground only) to required camber and gradient etc including watering before or during rolling complete all as specified and directed by Engineer-in charge.
M&L for 150mm thick (compacted thickness) wet mix macadam (WMM), in two layers of 75 mm thick (each layer to be rolled and consolidated separetly) confirming to the grading given in table 400 -12 spread by mechanical mean and rolled by using 8-10 ton vibrator power roller over compacted surface as specified in clause 406.3.5 of MoRTH specification complete all as specified and directed by Engineer-in charge.
M&L for 150mm thick (spread thickness) Granular Sub Base Course (GSB) grading as per Grade-1 as per morth specification beneath the wet mix macadam (WMM) up to required density to form true surface, spread,surface binding with watered connosolidated and rolled with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed by Engineer-in charge.
M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc. 400 sqm exc. 50mm deep and not exc. 100 mm deep complete all as specified and directed by Engineer-in charge.
M&L for preperation of unsurfaced water bound macadam/WMM surfaces of any type by brushing with wire brushes for removing caked mud etcsweeping with brooms and finally fanning the cleaned surfaceswith gunny bagto remove all loose dirt etc and applying evenly a tack coat of VG-10 with bitumen @ 7.50 kg per 10 sqm with the help of mechanical sprayer complete all as specified and directed by Engineer-in charge.
M&L for laying and consoliding (consolidated thickness of 75 mm or less) premix dense bituminous macadam (DBG grading - 11) using minimum 4.5% VG-40 grade binder by weight of total mix aggregate gradation as per Grading 2 of Table 500-10 of MoRTH specification for road and bridge works 2013 rolling and compacted to required camber and gradient 8 to 10 tone power rolled (rate shall be included as top finished similar to dense bituminous carpating) complete all as specified and directed by Engineer-in charge. NOTE :- (i) Mechanical paver and vibratory roller are required (ii) In case there is variation in quantity of binder content as specified above in plus side due to job mix formula, No price adjustment for using more quantity of bitumen and if same is in minus then Rs. 33 per Kg of binder shall be adjusted in above quoted rat.
M&L for Premix bituminous macadam of paving bitumen of VG-30 grade with 4% binder content by weight of total mix, any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engineer-in charge.
M&L for applying evenly a priming/tack coat with paving bituminous primer VG -10 @ 2.5 kg per 10 sqm with the help of mechanical sprayer complete all as specified and directed by Engineer-in charge.
M&L for repair to pot holes any depth area not exceeding 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to atleast 25 mm in depth, making good by applying tack coat VG-10 at 5 kg per 10 Sqm, putting in premix bituminous macadam well rammed and sealed with binder 9.8 kg per 10 sqm binded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premix binder and sand) with 8 to 12 tonne power roller depth of pot holes exc. 30mm complete all as specified and directed by Engineer-in charge.
M&L for preparation of existing black top surfaces by brushing with wire brushes for removing cakedmud etc, sweping with broomes and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc. and applying evenly a priming/tack coat with paving bituminous primer VG -10 @ 5.00 kg per 10 sqm with the help of mechanical sprayer complete all as specified and directed by Engineer-in charge.
M&L for preparation of existing black top surfaces by brushing with wire brushes for removing cakedmud etc, sweping with broomes and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc. and applying evenly a priming/tack coat with paving bituminous primer VG -10 @ 2.5 kg per 10 sqm with the help of mechanical sprayer complete all as specified and directed by Engineer-in charge.
M&L for laying and consoliding bituminous premix asphaltic semi dense concrete 30mm consolidted thickness with 5.5% binder content of paving bitumen VG-40 for 10 sqm area of road including rolling and compacted to required camber and gradient 8 to 10 tone power rolled (rate shall be included as top finished similar to dense bituminous carpating) complete all as specified and directed by Engineer-in charge. NOTE :- (i) Mechanical paver and vibratory roller are required (ii) In case there is variation in quantity of binder content as specified above in plus side due to job mix formula, No price adjustment for using more quantity of bitumen and if same is in minus then Rs. 33 per Kg of binder shall be adjusted in above quoted rat.
M&L for laying and consoliding bituminous premix asphaltic semi dense concrete 40mm consolidted thickness with 5.5% binder content of paving bitumen VG-40 for 10 sqm area of road including rolling and compacted to required camber and gradient 8 to 10 tone power rolled (rate shall be included as top finished similar to dense bituminous carpating) complete all as specified and directed by Engineer-in charge. NOTE :- (i) Mechanical paver and vibratory roller are required (ii) In case there is variation in quantity of binder content as specified above in plus side due to job mix formula, No price adjustment for using more quantity of bitumen and if same is in minus then Rs. 33 per Kg of binder shall be adjusted in above quoted rat.
Surface excavation not exc. 15 cm deep and getting out in Soft/loose soil complete all as specified and directed by Engineer-in charge.
Removing excavated soil not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engineer-in charge.
M&L for Moorum/red bajri filling in floors and pavings laid in layer not exc. 15cm thick spread, levelled and rammed including watering complete all as specified and directed by Engineer-in charge.
M&L for cleaning and preparing the road surfaces/existing or new painting of bituminous surfaces and applying 2.5mm thick road marking compound of approved quality using 8% mica with reflective thermoplastic paint confirming to BIS 3262 (1989) of temprature 160 degree celsius specified shade/colour laid down through fully atomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads despenser, propane tan heater and profile shoe heater exceeding 10Cm wide complete all as specified and directed by Engineer-in charge.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in charge.
Demolition of concrete in ground floor and paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in charge.
M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in coping, roof covering laid in slope, Hold fast including fromwork and weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed by Engineer-in-Charge.
M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) as in flooring / hardstanding finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in charge.
M&L for 25 mm thick sand cushioning for laying of precast concrete interlocking tiles including watering and consolidation complete all as specified and directed by Engineer-in charge.
M&L for machine pressed precast concrete inter locking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thick M-40 grade with grey cement and no pigment complete all as specified and directed by Engineer-in charge.
National Rewinding Works (BID ID -3144970)
M/s godara infratech and power industries (BID ID -3133133)
M/S LAXMAN CONSTRUCTION COMPANY (BID ID -3145715)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .