PROVISION OF TWO SECURITY GATES ALONGWITH LIGHTS AT ICGAE NEW MANGALORE AT BAJPE, MANGALORE UNDER GE(I)(CG)GOA

Amount

SCHEDULE PART-I [B/R ITEMS] Excavation in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in hard/dense soil, complete all as specified and directed.

Returning filling in hard/dense soil including spreading levelling watering and well ramming in layers not exceeding 25 cm thick. complete all as specified and directed.

Removing excavated material (soils) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in foundation mass concrete filling complete all as specified and directed.

M&L for formwork to sides of concrete foundation, footing, bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

M&L for formwork to sides of pillar, post, struts, piers, columns and stanchions for fair finished surface complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces. complete all as specified and directed.

M& L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Columns, pillars, piers, posts and struts. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span. complete all as specified and directed.

M&L for Reinforced cement concrete design mix M30 (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. complete all as specified and directed.

S& F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip. complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick cement mortar 1:4. complete all as specified and directed.

S&F mild steel framed work for gates with ornamental and intricate design, confrming to Fe 290 Gde-E-165, complete all as specified directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation. complete all as specified and directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry. complete all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6. complete all as specified and directed.

Aluminium Composite Panel (ACP ) Cladding Specification: Providing & fixing of Aluminium composite panel of approved make and colour for wall cladding for straight Brick/Rcc/stone walls & columns/beams with necessary Aluminium frame works at required level made out of 50 x 25 x 3 mm C section equalent. The panel should consist of 3 mm thermoplastic core of antitoxic LDPE sandwiched between 0.5 skins thick Aluminium sheet making a total panel thickness of 4 mm. the surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyster paint. The system shall be fixed using GI brackets, Aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done using weather sealant of Dow Corning 789 with necessary rods etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge. complete all as specified and directed.

Dismantling reinforced cement concrete of any description and any position (reinforcement cut to facilitate dismantling). complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for. complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (using 20 mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of internal brickwork or concrete surface and finished even and smooth without using extra cement, with and including 3mm thick wall care putty. complete all as specified and directed.

M&L for rendering 20 mm thick in CM 1:4 on fair faces of external brickwork or concrete surface, incorporating integral water proofing compound at 3% of weight of cement, as specified, and finished even and smooth without using extra cement. complete all as specified and directed.

Supply only integral water proofing compound.complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling surface and finished even and smooth without using extra cement including 3mm thick wall care putty. complete all as specified and directed.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work on internal wall and ceiling surfaces, complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm.complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. complete all as specified and directed.

M&L for plain cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100 mm thick in flooring. complete all as specified and directed.

M&L for Vitrified Ceramic tiles, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, with and including 20 mm thick screed bed in cement mortar 1:4. complete all as specified and directed.

M&L for plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 75 mm thick in sub base to flooring. complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as specified and directed.

S& F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane with and including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers. complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. complete all as specified and directed.

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application. complete all as specified and directed.

SCHEDULE PART-II [E/M ITEMS] Supply and fixing Post Top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete incl taking down old unsv complete all as specified and directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant with driver and lamp complete all as specified and directed.

S&F recessed mounted deep recessed adjustable/ fix downlight, 7 Watt, 3000K good quality illumination. Complete all as specified and directed.

S&F Neon LED outdoor strip light, 220 Volt having IP-65 protection complete all as specified and directed.

S&F LED bollard 9 Watt, rectangular shaped with opal acrylic diffuser and IP-65 protection complete all as specified and as directed. Make Bajaj BGBOS605 9 W LED WW or equivalent. complete all as specified and directed.

S&F 9W LED Up light with die-cast aluminium housing designed for rugged outdoor usage and IP 65 protection. complete all as specified and directed.

M&L for laying PVC 2 core 4 Sqmm insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, through PVC Conduit of suitable size.Complete all as specified and directed.

M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity. complete all as specified and directed.

M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series Complete all as specified and directed.

M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series Complete all as specified and directed.

M & L for galvanised steel tubing 20 mm bore medium grade laid in trenches, road crossings pole/wall etc. for cable protection complete all as specified and directed. Complete all as specified and directed.

Supply, laying & testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm 2 core all as specified and directed.

Supply and lay riddled earth in trenches for cable protection, spreading, levelling, Punning and consolidating complete all as specified and directed.

Supply and lay old bricks sub class A for cable protection laid trenches complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point or indicated including testing on completion. complete all as specified and directed.

M&L for Cutting of existing cement concret/butuminous road of size not less than 50 mm for laying of electrical cable in GI pipe and makng good to the disturbed surfaces by providing PCC or same material after laying of electrical cables and returning filling of soil complete all as specified and directed.

Shetty Construction Co (BID ID -3137906)