REPAIR AND MAINTENANCE OF CERTAIN BLDGS, INTERNAL ELECTRIFICATION AND CONNECTED WORKS INCLUDING LEDISATION AT 156 TA BN UNDER AGE(I) CIF(R).

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified.

S & F in repair floor door stopper of aluminium alloy body and tongue , anodised , with hard drawn steel spring, over all length of cover plate 140 mm , complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified.

S & F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane, complete all as specified.

Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed with and including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for keys scrubbing down with water, M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L vitrified ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

S&F 15 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors and taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore dia steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors and taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts, 'P' and 'S' trap and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed.

S&F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern and flush pipe ) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; including waste pipe,complete all as specified and directed.

S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket complete all as specified and directed.

S&F in repair low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15 mm dia with PTMT nuts of length 450 mm complete all as specified.

S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.

S&F fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repair bib taps, standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore complete all as specified and directed

S & F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F grating round 125 mm size of PTMT (Minimum weight 40 gms) as in repair, complete all as specified and directed.

S&F, centre hole basin / Wall mixture valve/ Telephonic mixer shower, cast copper alloy fancy type 15mm brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe , complete all as specified.

Dismantling water tanks (Capacity of tank exc 250 Ltr but n exc 500 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively, complete all as specified.

M&L for disconnecting existing tank, setting side for reparing cleaning and removing all scale and dirt from tanks and from mouths circulating pipes and housing in same position of capicity upto and including 500 ltrs and endrosed the word " CLEANED WITH DATE" complete all as specified.

Dismantling of steel (Corrugated, semicorrugated, etc) sheets in roof coverings, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by Engineer-in-Charge complete all as specified and directed.

Dismantling of steel (plain) sheets in roof coverings, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed.

M&L PCC 1:5:10, type E-2, (using 40mm graded crushed stone aggregate) in foundation filling/sunken floor and mass concrete, all as specified.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint/camouflaged pattern, complete all as specified and directed.

Material & labour for one coat of cement base paint including preparation of old surface to match the shade as per colour scheme as approved by Engr-in-Charge.

M&L for applying two coats of oil bound distemper on walls including preparation of old plastered surfaces complete all as specified.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

S & F, Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F, Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including 5.5mm thick tinted glass or 9 mm thick PVC sheet best quality and cylindrical lock including rubber gasket & neospreme lining complete all as specified and directed.

S&F in repair stainless steel curtain rods 20 mm dia including brackets with cut hole suitable for 20 mm dia rod fixed with screws and gutties in wall, including end caps with wall ornament and fixed to curtain rod with screws of design/shape all as directed and as approved by Engr in Charge.

S & F in position suspended anodised aluminium false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 605X605 mm fixed in the grid of E-grid suspended ceiling grid system duly suspended by 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3 mm size long and expansion hold fasteners 12.5 mm dia 40 mm long and M&I for exposed metal frame ceiling with 6 mm thick calcium silicate boards of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 600X600 mm grid (Expect frame work) complete all as directed and as approved by Engr in Charge and dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets,Complete all as specified and directed by Engineer-in Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring for one light/fan point controlled by one switch concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed for followings :-

(a) One light/fan/5 Amp socket independent/bell controlled by one, one way switch.

(b)For one three pin socket outlet 5 Amps independent board complete

(c) One 3 pin 5 Amp socket out let on the same board with other switches.

All as per item No 38 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 1.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly.

Supply and fixing in replacement of modular switch single pole one way 6 Amps 1 module complete all as specified and directed

S & F in replacement of modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.

S & F in replacement of modular switch single pole one way 16 Amps 1 module complete all as specified and directed

S & F in replacement of modular socket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed.

S & F in replacement of Modular Bell push 6A 1 module complete all as specified and directed.

M&L for replacement of Point wiring complete with 1.5 Sqmm single core multi stranded copper conductor cable PVC insulated unsheathed cable 1100 volt grade enclosed and including PVC casing and capping with fittings and accessories fixed to walls/ceiling by means of PVC rowl plugs fasteners with cadmium plated screws all as per IS including hard wood board and 3mm thick laminated sheet top covers including 1 Sqmm copper PVC insulated unsheathed continuous earth wire and connected to common earth dolly for the following:-

(a) One light/fan/5 Amp socket independent/bell controlled by one, one way switch.

(b)For one three pin socket outlet 5 Amps independent board complete

(c) One 3 pin 5 Amp socket out let on the same board with other switches.

(d) One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size

All as per item No 45 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly.

Supply and Fixing in replacement of switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement of socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and directed.

Supply and Fixing in replacement of switch socket combination 2 in one, 3 pin, 5/6 Amps, 240 volts AC flush type universal complete all as specified and directed.

Supply and Fixing in replacement of switch socket combination 2 in one, 3 pin, 5/6/16 Amps, 240 volts AC flush type universal complete all as specified and directed.

Supply and Fixing in replacement of Bell push, flush type, 5 amp 230 volts AC complete all as specified and as directed.

Supply and fixing in replacement of Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified.

Supply and fixing in replacement of ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and fixing in replacement of lamp holder insulated body with back plate batten/angle type for batten fitting complete all as specified.

Supply and Fixing in replacement of step type electronic Fan regulator, 120W single pole 240 volts complete all as specified.

Supply and Fixing in replacement of modular Fan regulator electronic step type heavy duty 2 module 230 volts120W complete all as specified and as directed.

Supply and fixing in replacement of Ultra modern recess mounting luminaire (yellow/white in colour) with high performonging LEDs suitable for mounting with armstrong/grid ceiling 2'x2' LED 36W and connecting up with three core copper conductor cable with Ceiling cutout size (595x595) mm, height 35mm including taking down old. Make : Havells cat part No. VENUSNEO2X2PLR36WLED865ST or equivalent cat part of make as specified in list of make here-in-after.

Supply and fixing in replacement of Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.Make as per Havells Cat Part No. LHEXAXPNIN1W020 or equivalent cat part of make as specified in list of make here-in-after.

Supply and fixing in replacement of Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver wall mounted LED Batten 10 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.Make as per Havells Cat Part No. LHEXAXPNIN1W010 or equivalent cat part of make as specified in list of make here-in-after.

S&F in replacement of 3 pin plug top, AC 230 V, 16 Amps complete all as specified and directed

S&F in replacement of 3 pin plug top, AC 230 V, 5/6 Amps complete all as specified and directed

Supply in replacement of hylam sheet cover 3 mm thick for fixing of switch,socket,regulator,etc of following size on existing box complete all as specified and directed.

(a) Size of 4 x 4 inches

(b) Size of 7 x 4 inches

S&F in replacement of PVC conduit medium grade with all fittings,ISI marked,of following size complete all as specified and directed.

(a) Size of 20 mm dia

(b) Size of 25 mm dia

S&F in replacement of PVC casing & capping with all fittings,ISI marked,of following size complete all as specified and directed.

(a) Size of 20 x 12 mm

(b) Size of 25 x 16 mm

S&F in replacement of PVC switch boards, closed recessed suitable for surfaces of following sizes with all fittings complete all as specified and directed.

(a) Size of 4 x 4 inches

(b) Size of 4 x 7 inches

(c) Size of 8 x 6 inches

Supply and fixing in replacement of LED Bulbs white /warm white (as per demand) in colour of 9/10 Watt,B-22 base Cap.

Supply and fixing in replacement of LED lights 18 watt recess mounted square type ceiling cutout side 210 mm, height 23 mm ±1 mm for 18W. including connection with 1.5 sqmm PVC insulated copper wire complete. Cat Part No.EDGEPRONEOSQDLR18WLED865S of Make : Havells or equivalent cat part of make as specified in list of make here-in-after.

Supply and fixing in replacement of LED lights 12 watt surface mounted round type ceiling cutout side 160 mm, height 23 mm ±1 mm. including connection with 1.5 sqmm PVC insulated copper wire complete. Cat Part No. EDGEPRONEORDDLR12WLED865S of Make : Havells or equivalent cat part of make as specified in list of make here-in-after.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing 1100 volts grade heavy duty 10 sqmm PVC insulated solid type aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core (2 core) cable flat or circular complete all as specified.

S & F in replacement of two single core sub main wiring 6.0 Sqmm multi-strand PVC insulated copper conductor FRLSH cable including PVC insulated copper conductor cable of size 6.0 Sqmm as cotinuous earth wire connecting to common earth including in 20mm PVC rigid conduit including connections of cable with MCBs or bus bars complete all as specified and directed. Note: 2x6 + 1x6.00 sqmm copper coductor with PVC Conduit shall be measured as one unit.

M&L in replacement of two single core sub main wiring 4.0 Sqmm multi-strand PVC insulated copper conductor FRLSH cable including PVC insulated copper conductor cable of size 4.0 Sqmm as cotinuous earth wire connecting to common earth including in 20mm PVC rigid conduit including connections of cable with MCBs or bus bars complete all as specified and directed. (Note: 2x4 + 1x4.00 sqmm copper coductor with PVC Conduit shall be measured as one unit).

Supply and fix in replacement of 1.5 Sqmm three core multi stranded copper conductor (FRLSH) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694 complete all as specified .

Supply and fixing in Replacement of Sheet metal enclosure IP-43 for MCB DB 2 way Single door SPN, complete all as specified.

Supply and fixing in Replacement of Sheet metal enclosure IP-43 for MCB DB 4 way Single door SPN, complete all as specified.

Supply and fixing in Replacement of Sheet metal enclosure IP-43 for MCB DB 12 way double door SPN, complete all as specified.

Supply and fixing in replacement of Sheet metal enclosure IP-43 for MCB DB 4 way double door SPN, complete all as specified.

Supply and fixing in replacement of sheet metal enclosure for multi phase out going suitable for mounting 63 Amps FP MCCBs. Vertical distribution board 4 ways mounting as incommer with 200 Amp rated bus bar,IP-42 protection, double door concealed/wall mounting suitable for mounting MCBs/isolaters. all as specified and as directed.

Supply and fixing in Replacement of Sheet metal enclosure MCB DB 8 way double door SPN, complete all as specified.

Supply and fixing in replacement of 415V 10KA 'C' curve MCB of 40 to 100 Amps TPN and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing in replacement of 240V 10KA 'C' curve MCB of 6 to 32 Amps SP and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing in replacement of 240V 10KA 'C' curve MCB of 40 to 63 Amps SPN and current carrying capacity in the DB complete with connection testing and commissioning.

S&F in replacement of MCCB 63 Amps, 4 pole , 16KA 415V 50Hz, AC supply, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 25,500.50 during AOC Note:- Tenderers shall not quote for this Schedule

NATIONAL TRADING COMPANY

M/s Rahat Traders