REPAIR/ MAINT OF WINDOW/ SPLIT TYPE OF AC, GEYSER, SOLAR WATER HEATER, REFRIGERATOR, DEEP FREEZER AND ALLIED WORKS AT MIL STN SURANUSSI UNDER AGE(I) SURANUSSI

Amount

S&F in repair/replacement fan motor single phase 230 Volts, 1400 RPM 3 speed 1/8 HP copper wound for desert cooler complete all all as specified & directed by the Engineer-in-charge. Make Crompton/bajaj/usha

S&F in repair/replacement, plug top 3 pin 5 amps, 230 volts (ISI marked) complete all as specified & directed by Engineer-in-charge. Make C&S/ Anchor/Legrand or equivalent

S&F in repair/replacement, capacitor suitable for 4000/5000/6000 cfm for fan motor of desert coolers complete all as specified & directed by Engineer-in-charge. Make-Epcos/Bajaj/ Havells/CG

S&F in repair/replacement, submersible pump PVC body 230 volts, 1/60 HP for desert cooler complete all as specified & directed by Engineer-in-charge. Make- Khaitan/Ajanta or ISI Marked

Supply and fixing of wood wool pads of size 450mmX600mm set of three of best quality with and including wire netting (chicken wire mesh) as approved by Engr-in-Charge complete all as specified and directed .

S&F in repair fan motor suitable for water cooler of capacity 40/80 ltr to 150/180 ltr, copper wound complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair condensor coil of water cooler of capacity 40/80 to 60/120 ltr complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repairs fan blade suitable for water cooler 60/120 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, capacitor 10/15 MFD (suitable or as per existing sample) for fan motor of water coolers/refrigerator complete all as specified & directed by Engineer-in-charge. Make-Bajaj/ Havells/CG or equivalent.

S&F in repairs float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15 mm bore iron pipe, weight not less than 140 grams/each, suitable for water/desert coolers complete all as specified & directed by Engineer-in-charge. Make- Prayag or equivalent

S&F in repair, relay and over load protector set suitable for water cooler/refrigerator of any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Repair of top door of the any capacity water cooler with the help of welding, hinges, nuts bolts washers and scratching the old rust hole area of the body part, apply the automotive body putty smoothening with sand paper, clean the entire part, apply the primer and paint complete all as specified by the Engineer-in-charge.

S&F in repair, PVC drain out pipe, heavy duty 32/40 mm dia, wall thickness 2 mm having length not less than 1.0 mtr complete with fittings such as nipple, clip etc complete fixed to water coolers of any capacity complete all as specified & directed by Engineer-in-charge.

M&L for cutting and removing unservicable freezer unit of refrigerator capacity 310/320 Litres of any make, and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repairs thermostat suitable for refrigerator 165 to 320 litres capacity complete all as specified & directed by Engineer-in-charge. Make-Theeta/Racold/Tasspass

M&L for servicing of spilt type AC of capacity 1.5/2TR of any make by opening the condenser unit fixed on outside and cooling unit fixed inside the building,and cleaning (Including complete pressurized chemical washing with pressure pump and plastic bag covering avoid dust & water spreading) the complete condensor unit and cooling unit including fins and checking/testing of all parts for its serviceability, and rectification of unusual noise of motors, checking of refrigerant standing pressure, replacement of minor parts such as nut/bolt washers etc and reassembling of complete unit including testing for smooth functioning complete all as specified & directed by Engineer-in-charge.

M&L for servicing of window type AC of capacity 1.5/2 TR of any make including cleaning of filter on front side by removing dust, cleaning (Including complete pressurized chemical washing with pressure pump and plastic bag covering avoid dust & water spreading)the condenser including fins, blower fan motor and checking/testing of all parts for its serviceability, oilling/greasing to condenser cum blower fan motors, rectification of unusual noise, checking of refrigerant standing pressure, replacement of minor parts such as nut/bolt washers etc. and reassembling of complete AC including testing for smooth functioning complete all as specified & directed by Engineer-in-charge.

S&F in repair/replacement outdoor fan motor of split type A/C 1.5/2 TR capacity, complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair blower fan motor of capacity 1/30 or 1/20 HP copper wound suitable for split type AC1.5 /2 TR, AC/DC complete including testing commissioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M&L for removing the condenser fan motor from window type A/C of 1.5/2 TR capacity, rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including replacement of gun metal bush, side rubber packing and refixing of motor in original position with new washer nuts & bolts complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F capacitor 35 to 70 MFD (3/ 4 pin/6 pin or existing) suitable for A/C of capacity 1.5/2 TR complete all as specified & directed by Engineer-in-charge. Make-Epcos/Havells/CG or equivalent

Repair of refrigerator fan motor suiable of cap 165 ltr/285/310 ltr complete including testing complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

S&F in repair, fan blower of window type AC 1.5/2 TR capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S & F Cutting and taking out compressor of window type AC of 1.5 /2TR and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified & directed by Engineer-in-charge. Make- Hitachi,LG,Voltas or equivalent.

S&F in repair, of thermostat suitable for split/window type AC 1.5/2 TR capacity complete all as specified & directed by Engineer-in-charge. Theeta/Racold/Tasspass

S&F in repair, copper condenser suitable for split type AC of capacity 1.5/2 TR complete including top up gas charging and checking all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair/replacement, plug top three pin 15/16 Amps 230 volts AC complete all as specified & directed by Engineer-in-charge.

S&F in repair, Air Filter for Air conditioner split type having capacity1.5/2.0 ton (Set of 3 pieces) complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, PCB suitable to Split type AC 1.5/2 TR (ordinery/Invertor) complete all as specified & directed by Engineer-in-charge. Make- As per existing make

S&F in repair, PCB suitable to refrigerator to any capacity complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair copper tube size 1/4" of split AC having capacity 1.5/2 ton complete all as specified & directed by Engineer-in-charge.

M&L in repair for swing motor of split AC any make any type all as per sample all as specified & directed by Engineer-in-charge

M&L in repair for split AC valve of ½” dia all as per sample all as specified & directed by Engineer-in-charge

M&L in repair for split AC valve of ¼” dia all as per sample all as specified & directed by Engineer-in-charge

Cutting and taking out compressor of deep freezer of capacity 150/180/210 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge.Make- As per existing make and model

Cutting and taking out compressor of water cooler of capacity 60/120 Ltr and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, copper condensing coil suitable for refrigerator of capacity 165 to 280 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair, copper condensing coil suitable for refrigerator of capacity 280 to 320 liters complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair heater refrigerator capacity 310/320 Litres complete all as specified & directed byEngineer-in-charge. Make- As per existing make and model

S&F in repair, capillary tube suitable for any make & capacity water cooler/refrigerator complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model.

Supply & charging of refrigerant gas R-32 (freon) for charging in window/split type AC of 1.5/2 TR capacity complete and checking of leakage, testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station.

Supply & charging of refrigerant gas R-410A for charging in Refrigerator/water cooler/DF/ window/split type AC of 1.5/2 TR capacity complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station.

Supply & charging of refrigerant gas R-134C (freon) for rRefrigerator/water cooler/DF/ window/split type ACs of any capacity complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/ Engr-in-charge and daily usage record to be maintained at the time of leaving the station

Supply & charging of refrigerant gas 600A for refrigarator/water cooler of any capacity complete and checking/testing for proper functioning all as specified & directed by Engineer-in-charge. Note : Measurement of Gas cylinder to be done in the presence of JE/Engr-in-charge and daily usage record to be maintained at the time of leaving the station.

S&F in repair transformer of voltage stabilizer 4/5 KVA and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with 'E' class varnish, including and reassembling and fixing in position complete all all as specified & directed by the Engineer-in-charge.

S&F in repair, PCB circuit of existing size and shape of volatage stabilizer 4/5 KVA complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair relay of volatage stabilizer 4/5 KVA complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

S&F in repair MCB SP 25 Amps protected plug top & socket cat no-Havells DBOXx , 240 Volts complete all as specified & directed by Engineer-in-charge. (Make:-Havells/Legrand/IndoAsian)

S&F in replacement of PVC connection pipe 15 mm dia of both ends PTMT nuts and 450 mm length complete all as specified Make Prayag or equivalent

Cutting and taking out DC compressor of inverter refrigerator of capacity 285/300/310/340 litres of any make, & replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter & supply & recharging of refrigerant complete including testing for smooth functioning complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

Cutting and taking out DC compressor of inverter split type AC of 1.5TR and supply and fixing the compressor with jointing of copper refrigent pipe line in and including charging of refrigent gas to required level complete all as specified & directed by Engineer-in-charge. Make- As per existing make and model

M/L sub main wiring of two single core PVC insulated unsheathed stranded copper conductor cables of size 4 Sqmm, 1100 volts grade, drawn through and including 20 mm dia PVC surface conduit of 1.2 mm wall thickness including all fixing accessories, and 1.5sqmm PVC insulated stranded copper conductor cable as earth wire connected to earth dolly complete all as specified and directed. (Phase-Red, Neutral – black in colour of cable) Note:- Both running cables including earth wire including one run pvc conduit pipe shall be measured & paid for as single length.

Supply and fix in repair thermostat 0-85 degree celsius of required size/model complete all as specified and as directed.

Supply and fix in repair thermostat 0-85 Degree Celsius of required size/model/Make-suitable for solar water heater complete all as specified and as directed.

Supply and fix in repair heating element of 1.5 KW suitable for vertical type/horizantal geyser of required size/ type / model ISI marked complete all as specified and as directed

Supply and fix in repair heating element of 2.0 KW suitable for vertical/ horizontal type geyser of required size/ type / model as per IS 4159-83 complete all as specified and as directed.

Supply and fix in repair heating element of 2.0 KW suitable for solar water heater of required size/ type / model as per IS 4159-83 complete all as specified and as directed

Supply and fix in repair heating element of 3.8 KW suitable for solar water heater of required size/ type / model as per IS 4159-83 complete all as specified and as directed

Supply and fix in repair base flange condsisting of inlet / outlet pipe, gasket drain plug nut/ bolts for fixing heating element etc. complete of suitable type of existing size/model complete all as specified and as directed

Supply and fix PVC flexible Heavy duty outlet pipe 60cm long heavy duty suitable type for hot water application of 12mm bore with brass coupling, nuts, washers at both ends complete all as specified and as directed by Enge-in-Charge.

B D BATRA AND SONS

R K ENTERPRISES

LOVELY AIRCON SYSTEMS