Nagar Parishad Office Roof Grading, Shed and Misc. Works at Manasa, Dist. Neemuch

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc.

Extra for R.C.C./B.M.C./R.M.C. all works above floor 2 level for each floors or part thereof.

Reinforcemnt for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 120 kg per cum of RCC qty

Kota stone 25mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4 cement mortar (1 cement : 4 course sand) (minimum size of kota stone 2.0 sqft)

Cement mortar 1:3 (1 cement : 3 sand).

Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894- 2002, class designation 75 Kg/CM2 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding : Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for brick work in superstructure above floor 2 level for each floors or part there of .

15 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Providing & fixing corrugated Galvanised steel (CGS) sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/ m²

Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.

15% for electric, sanitary, plumbing & other Miscellaneous Works

Please Enable Macros to View BoQ information