AS PER ATTACHED NIT

Wrought iron and mild steel welded work (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately

Providing, hoistingand fixingup to floor five level precast reinforced cement concrete inshelves including setting in cement mortar 1:3 (1cement : 3 coarsesand), cost of required centering, shuttering and finishing withneat cement punning on exposed surfacesbut excluding thecost of reinforcement, with 1:1.5:3 (1cement :1.5coarsesand :3graded stone aggregate 12.5 mm nominal size).

Supplying ,Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

M/R Work of Bazar Samiti Gate to Kumhrar Railway Gumti Road Under New Capital Road Division, Patna for the year 2026-27.

Items

(A) As prescribed in Tender document duly pledged in Favour of Executive Engineer, New Capital Road Division, RCD, Patna

Detailed Estimate Of M/R for Repairing of Bazar Samiti gate to Kumhrar railwy Gumty road under new capital road division, for the year 2026-27

Wrought iron and mild steel welded work (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately

Providing, hoistingand fixingup to floor five level precast reinforced cement concrete inshelves including setting in cement mortar 1:3 (1cement : 3 coarsesand), cost of required centering, shuttering and finishing withneat cement punning on exposed surfacesbut excluding thecost of reinforcement, with 1:1.5:3 (1cement :1.5coarsesand :3graded stone aggregate 12.5 mm nominal size).

Supplying ,Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.