Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-Finance | ₹5.1 L | L1 | Accepted-Finance All documents found as per NIT |
| 2 | L2₹5.3 L+₹16,542 (3.23%)Accepted-Finance | ₹5.3 L+₹16,542 (3.23%) | L2 | Accepted-Finance All documents found as per NIT |
| 3 | L3₹5.7 L+₹54,914 (10.7%)Accepted-Finance R O 127 3 LOWER BAZAR SHIMLA 1 | ₹5.7 L+₹54,914 (10.7%) | L3 | Accepted-Finance All documents found as per NIT |
Tender Value
₹5.1 L
EMD Value
₹10,239
Closing Date
21 Jan 2020, 10:00 amClosed
Asstt Engineer (Elect)/AC(Elect)
SHQ BSF MALDA
Repairing of UG cable
2020_BSF_535452_1
57/Engg(El)/SHQ-MLD/2019-20
Open Tender
Electrical Works
Item Rate
60 days
BOP KANCHANTAR IN AOR OF 24 BN BSF
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
DIG BSF MALDA
₹10,239
1 Feb 2020
13 Jan 2020
22 Jan 2020
13 Jan 2020
21 Jan 2020
13 Jan 2020
Amount
Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3½ X 35 sq. mm
Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. A) 3½ X 185 sq. mm
Laying (Re-laying) of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. A) A) Up to 35 sq. mm
Laying (Re-laying) of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. A) Above 95 sq. mm and upto 185 sq.mm
Laying (Re-laying) of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering a) Above 185 sq. mm and upto 400 sq. mm
Supplying and making end termination with brass compressiongland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Kvgrade as required. (A) 3½ X 185 sq. mm (70mm)
Dismantling of underground cable after removing the sand cushioning and protective cover and same recovered (with sand & Bricks ) after repaired of UG cables in the existing ground (available excavated ) with mechanical tools etc. as per site requirement ( 120 sq. mm and upto 400 sq. mm)
Supplying ,installation,testing and commissioning of cubical type padestal mounted outdoor Junction Feeder Pillar made out of 2.0 mm. thick CRCA for body and 3.0 mm. thick MS sheet for top and gland plate with powder coated paint. 400A, 4P, aluminium bus-bar.MS angle legs should be supported by 600mm long legs and frame made of [50mmX50mmX5mm] thick MS angle iron at the base and almirah type single leaf hinged door with locking arranement , gland plate at bottom , water drip proofing arrangement at the top ,air ventilation grooves at sides , dust and vermin proof design, earthing studs and making connection , interconnection with adequate size of cables lugs/thimble ,earth stud and as required .The 4 legs of feeder pillar is to be grouted in cement concrete 1:3:6 ( (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm normal size ) foundation of size 500mm x 500mm x 500mm below the ground level. JUNCTION FEEDER PILLAR BOX FOR 3.5(CORE)X185SQMM CABLE
M/s. SUBRATA ROY
ELECTRO MECHANICAL ENGINEERING
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .