SPECIAL REPAIR TO OLD SGT AND BELOW SMQs AND OMQs AT AF STN BARNALA UNDER GE AF HALWARA

Amount

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc.complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6M mean radius and built in CM in 1:6 complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 12mm thick cement plaster in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 3% by weight of cement, finished fair and even without using extra cement complete all as specified.

M&L for 5mm thick cement plaster in cement mortar (1:3) as on ceiling surfaces finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces and applying two coat of distemper oil emulsion over a coat of primer and JK Birla wall care putty on new plaster surfaces complete all as specified and directed..

M & L for complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of primer coat of and a layer of Birla putty for finishing smooth surfaces complete all as specified and directed.

M&L for preparation of new plastered suraces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying three coat white wash on ceiling surfaces complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying three coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat white wash on wall surfaces complete all as specified and as directed.

Taking down of chowkat / frames with shutter (without taking off shutter from frames) n.exc 1.5 Sqm each complete all as specified and directed.

All as per Sl item No 17 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Taking down shutters of any description exceeding 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed.

S&F factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) S&F Glazing & Wire cloth shall be measured and paid separately and Supply only guard bars shall be measured and paid separately. (iii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

S&F steel ventilator with side hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed.

Supply only mild steel work as in grills, gratings etc. such as window guard bar, angle iron in door frames, barred iron door and similar work etc; confirming to Fe-290 Gde E-165 including cutting and welding as required complete all as specified and directed.

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work including Filling hollow portion of frame with PCC 1:3:6 type C-1 complete all as specified and directed.

S&F 35 mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.24(a); supplied and fixed to chowkats complete all as specified and directed. Note: Glazing and Wire cloth shall be measured and paid separately

S&F factory made Plain, framed, panelled shutters, 35mm thick, 2nd class hard wood , plain, framed, panelled shutters (any number of panels), with panels of 9mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150mm and fixed complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Aluminium anodised cast type handle of 150mm size complete all as specified and directed..

S&F Aluminium anodised cast type handle of 100 mm size for cupboard shutters complete all as specified and directed..

S&F Mild steel 300mm size ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F small fitting of 1st class hard wood any shape not exceeding 200 cu cm, as in for door stopper fixed with and including 50mm butt hinges, or cleat etc or similar small article complete all as specified and directed.

S&F in repairs 25 mm dia Harison rails, mild steel, chromium plated with fixing fancy type brass CP brackets and side knobs, stops ,rollers etc as in curtain rod and fixed to wall complete all as specified and directed.

M&L for prepration of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of primer red oxide on new steel surface of girth over 10 cm, complete all as specified and directed.

All as per item No 37 but without red oxide primer .

M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint on old steel surface of girth over 10 cm, complete all as specified and directed.

M&L for preparation of new wooden surfaves and applying 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface of girth over 10 cm, complete all as specified and directed.

M&L for preparartion of old wooden surafaces and applying one coat of synthetic enamel paint on old wooden surface of girth over 10 cm, complete all as specified and directed.

S&F PVC door frame of size 50x47mm made out of 5mm wood grain printed PVC sheet, reinforced with ms square tube all as specified.

S&F 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods.MS frame shall be covered with heat maulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and wood grain colour PVC sheet for top rail ,lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of wood grain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings.

S&F 18/19 mm thick Block board, grade 1 quality, exterior grade, commerical type, fixed with screws to timber frame work complete all as specfiied and directed.

M&L for 0.9mm thick Decorative laminate type 1 of surface finish , colour and pattern as approved , fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for 6mm thick external teak wood lipping fixed to 18/19mm thick block board or veneered particle board fixed with nails complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised with 40 mm width flaps when open complete all as specified and directed.

S&F 100mm Hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm(square/rectangular) in floor etc set joints in neat cement slurry and pointed in white or coloured cement to match the floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded aggregate as in sub base of floors/below tiles complete all as specified and directed.

M&L for joint less Non- skid ceramic colured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm(square/rectangular) in floor etc set joints in neat cement slurry and pointed in white or coloured cement to match the floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as item No 53 above but as in skirting/dado over and including rendering 10mm thick in CM 1:4

M&Lfor joint less Glazed ceramic coloured tiles in vertical surface 300x200x7mm/300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surfaceover and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protections/ path including necessary form work complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor apron etc, laid, bedded and pointed in any mortar and including removal of debrish & rubbish from the site complete all as specified and directed.

M&L for granite 20mm thick (of any type ) work (table rubbed and polished) in cooking plateform and like fixed in cement mortar 1:4 over and including 15mm thick cement screed in CM 1:4 and pointing in white cement(1:2) using marble dust, making holes in RCC shelves suitable for gas pipe with round edges where required complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters vanities etc including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

S&F 32mm dia G I pipe 450mm long as in spouts pipe beveled cut at both ends, fixed in walls by making hole in parapet wall of roof, sunshade ,chajjas etc above the R C C slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and directed.

Taking down or up steel 15mm bore tubing and connections inculding cleaning for refixing or removal to store complete all as specified and directed.

All as per Sl item No 61 above but 20mm bore

S&F 15mm bore Tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc or laid in floors complete all as specified and directed.

All as per Sl item No 63 above but 20mm bore

S&F in repairs 20mm bore dia stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc screwed both ends for iron pipe or for unions and fixed complete all as specfied and directed.

S&F in repairs Health faucet (ABS body mild steel chromimum plated suitable for 15mm dia pipe) with 1.2 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

Dismantling of existing PVC water tanks and S&F 750 ltrs capacity rotational moulded water storage tank (cylinderical vertical with closed top ), double layer wall construction (ISI Marked) hoisted and fixed in position including 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers including cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

S&F in repairs WHB in vitreous white chinaware of 550x400 mm size including CI/MS brackets ,45cm long PVC connection 15mm dia. 32mm dia PVC waste pipe , 32mm dia waste coupling of suitable size/length, 15 mm dia CP pillar cock, 15mm bore CP Angle cock and all connection complete all as specified and directed..

S&F in repair vitreous china squating pan "Orissa" pattern size 580 x 440 mm white with integral foot rest including connection to trap and to flushing pipe, anti syphonic pipe etc, complete including making good to floors complete all as specified and directed.

S&F in repairs China ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass jet faucet suitable for EWC with PVC Chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F in repairs syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets, 32mm flush pipe etc, complete all as specified and directed.

S&F in repairs PVC connection 45 cm long with two nuts and washers complete all as specified.

S&F in repairs PVC bath room cabinet mirror of size 40cmx50cm complete as in all as specified.

S&F in repairs grating around 100mm size of PTMT (minimum wt 25 gms)

S&F in repairs chromium plated shower rose& arm with or without swivel joints suitable for fixing to steel pipe of 15 mm bore complete all as specified and directed.

S&F in repairs 15mm bore bib taps long body, C P cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs 15mm bore dia stop valves, chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore dia stop valves (concealed type) , chromium plated, cast copper alloy, fancy type with capstan head and cup, screwed down, high pressure, screwed both end, long screwed shank for iron pipe complete all as specified and directed..

S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling 75 to 100 mm dia cast iron pipes, jointed in cement mortar and fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

S&F 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on walls/trenches etc with clamps complete all as specified and directed.

S&F for 75 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed on wall/trenches with clamps complete all as specified and directed.

S&F cast iron bends (any radius) diminishing pieces or tappers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

All as per item No. 87 here in before but of 75 mm bore.

S& F cast iron cowls 75mm bore of pipe complete all as specified and directed.

Demolition of cement conrcete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling brick tiles or terracing tiles, single layer on roof complete all as specified and directed.

Roughening surfaces of old/concrete floor by backing sweeping clean with iron brush and washing down with water etc and applying neat cement slurry @ 3.00 Kg of cement/Sqm complete all as specified and directed

M&L avg 40mm thick PCC(1:2:4) type B1, (using 20mm graded stone aggregate) finish even and smooth using extra cement complete all as specified.

M&L for PCC 1:2:4, type B-1 (using 20 mm garded stone aggregate) as in roof kerbs/mud stops complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacturers instructions complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately.

Supply only Integral waterproofing compound

Preparation of roof top surfaces providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced having sun Reflectivity index (SR) of 106 on top of concrete roof surfaces all cracks upto 3mm at corner joints channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali urethene BTD/Sikalastic 560/smart care damp proof ultra having coverage @ min 0.75Kg/Sqm and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/Sikalastic 560/smart bcare damp proof ultra @ total consumption 2Kg/sqm in two coats for maintaining minimum dry film thickness 1.50mm and elongation at break of free film of approx 350% The material shall be applied with brush or rooller ,complete in all respect as per the direction of Engineer -in-Charge /Consultant (Note :6hrs interval between two coat will be maintain ) All auxillary and accessories involved during application should be supplied by single manufacturer as part of system . Make STP/Sikka/Asian paint or equivalent as approved by GE. i)The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years . However contractor may deposit the FDR of same amount in favour of Ge . If contractor fail to rectify the defect pointed out during this period in writing , the defect shall be got rectified at contractor " risk and cost and the payment shall be made from the amount of kept reserved or by encashing the FDR deposited by the contractor as guarantee. the contractor's quoted rates for this item shall deemed to be inclussive of this aspect.

S & F in replacement stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete as per sample kept in GE’s office suitable for officers quarters complete all as specified and as directed by Engineer-in-Charge.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, in any position(with clamps in wall) complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia

m/s k.k. construction co.

S K BANSAL AND CO.

NARESH KUMAR MITTAL