Porunai Display 234

Amount

BLOCK 2 - SIVAGALAI

FALSE WALL

Provision of false wall of height 4 metres and thickness 0.1m made using a frame work of 1" x 2" aluminium extruded box sections as frame work. On one side the frame work shall be covered using a 19mm thk marine water proof ply finished with two coats of putty and 2 coats royal emulsion in required colour.

URN DISPLAY TYPE 1

Supply and installation of a display case of size 3200mm x 950mm x 2450mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case has two parts - one floor mounted base to accomodate a large urn and a cantilevered base with 6 pedestals of varying sizes. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a description board of size 2450mm x650mm which is made of stretch film and backlit.

PEDESTAL DISPLAY

Supply and installation of a floor mounted display case of size 650 mm L x 650 mm Wx 1500 mm HT using boiling water proof marine plywood in thickness 19mm to be exactly executed as per drawing. The case shall have a duco finish and the pedestal have a mounted glass case made from 6mm thick museum glass with three sides sealed with silicon sealant and the 4th side being opearable. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

CANTILEVERED DISPLAY ISLAND TYPE

Supply and installation of a display case of size 2400mm x 1150 mm x 3750 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. This display has a back panel and a cantilevered counter with glass casing and a slanting case for objects on either side of this free standing wall. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

URN DISPLAY ISLAND

Supply and installation of a display case of size 2700mm x 900mm x 1750 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case has two parts - one floor mounted base to accomodate a large urn and a floor mounted base with pedestals of varying sizes. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a description board of size 1050mm x550mm which is made of stretch film and backlit.

URN DISPLAY TYPE 2

Supply and installation of a display case of size 4500mm x 950mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case has two parts - one floor mounted base to accomodate a large urn and a floor mounted base with pedestals of varying sizes. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a description board of size 1125mm x600mm which is made of stretch film and backlit.

URN DISPLAY NEW

Supply and installation of a display case of size 3000 mm x 750 mm x 3600 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case has two parts - one floor mounted base to accomodate a large urn and a floor mounted base with pedestals of varying sizes. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a wall paper behind.

SLANTING DISPLAY

Supply and installation of a display case of size 2800mm x 600mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The slanting base shall have a clear acrylic base 8mm thick with back lighting. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a description board of size 1125mm x600mm which is made of stretch film

SLANTING DISPLAY TYPE B

Supply and installation of a display case of size 2400mm x 600mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The slanting base shall have a clear acrylic base 8mm thick with back lighting. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a description board of size 1125mm x600mm which is made of stretch film and backlit.

OFFERING POTS DISPLAY

Supply and installation of a display case of size 3000mm x450mm x 3600 mm using an aluminium square section powder coated black with ply wood backing in 19mm thick marine waterproof plywood with operable glass shutters is needed to be exactly executed as per drawing. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

CANTILEVERED DISPLAY

Supply and installation of a display case of size 3500mm x 550mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. This display has a back panel and a cantilevered counter with glass casing and a slanting board for text. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

PANEL BOARD

Supply and installation of a panel board of size 2500mm x 1400 mm using 19mm thick marine waterproof plywood is needed to be exactly executed as per drawing. The case shall have a duco finish

GLOBAL CONTEXT DISPLAY

Supply and installation of an L shape false wall display case of size (5800mm + 2900mm) x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. This display has a back panel and a cantilevered counter (length - 2500 xdepth 350mm) with glass casing and a slanting board for text. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. The case shall also have a back lit text board made from stretch film of size 1000mm x 2100mm

CANTILEVERED DISPLAY type 2

Supply and installation of a display case of size 2070mm x 450 mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. This display has a back panel and a cantilevered counter with glass casing and a slanting case for objects. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

OFFERING POTS DISPLAY TYPE 2

Supply and installation of a display case of size 3000mm x1500mm x 3600 mm using an aluminium square section powder coated black with ply wood backing in 19mm thick marine waterproof plywood with operable glass shutters is needed to be exactly executed as per drawing. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The intermediate glass shelves should be atleast 12mm thick toughened glass with glass profile lighting. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

BLOCK 3 ADHICHANALLUR A BLOCK-

FALSE WALL

Provision of false wall of thickness 0.1m made using a frame work of 1" x 2" aluminium extruded box sections as frame work. On one side the frame work shall be covered using a 19mm thk marine water proof ply finished with two coats of putty and 2 coats duco in required colour.

Pedestal Display

Supply and installation of a display case of 500 x 500 x 750mm using a frame work of 1" x 2" aluminium extruded box sections as frame work using 19mm thick BWP marine plywood. the pedestal has a glass case of height 400mm which is operable through a hydraulic mechanism is needed to be exactly executed as per drawing. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

Pedestal Display

Supply and installation of a display case of 350 x 350 x 750mm using a frame work of 1" x 2" aluminium extruded box sections as frame work using 19mm thick BWP marine plywood. the pedestal has a glass case of height 400mm which is to be sealed and needed to be exactly executed as per drawing. The display case also hase a false wall of size 350mm x 3000 mm and 100mm thickness. The case shall have a duco finish and have a glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

BIG URN DISPLAY

Supply and installation of a floor mounted display case of size 6500 mm L x 1500 mm Wx maximum height 4000 mm using boiling water proof marine plywood in thickness 19mm. The case shall have a black powder coated aluminium frame and 10mm thick museum glass with three sides sealed and the 4th side being opearable. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

PLY PANELS

Supply and installation of a wall mounted plywood panel of thickness 25mm using boiling water proof marine plywood.

BIG URN ISLAND DISPLAY

Supply and installation of a floor mounted display case of size 6400 mm L x 2100 mm Wx maximum height 4000 mm using boiling water proof marine plywood in thickness 19mm. The case shall have a 10mm thick museum glass with three sides sealed and the 4th side being opearable. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

BOWL DISPLAY

Supply and installation of a floor mounted display case of size 2100 mm L x 550 mm Wx height 750 mm using boiling water proof marine plywood in thickness 19mm. The case also has a false wall of size 2100mm x 2100mm with thickness 75mm and 25mm ply on top. The case shall have a 6mm thick museum glass with three sides sealed and the 4th side being opearable using slider. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

OFFERING POTS DISPLAY

Supply and installation of a floor mounted display case of size 2800 mm L x 1300 mm Wx height of the base 200mm using boiling water proof marine plywood in thickness 19mm. The case also has pedestals of maximum height 900mm made out of 25mm ms box sections with 25mm thick bwp plywood on top. The case shall have a 4mm thick museum grade acrylic box with all sides sealed. The case also has a false wall of height 1500mm x 450mm and 100mm thickness. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

BIG URN CENTRAL DISPLAY

Supply and installation of a floor mounted display case of size 2550 mm L x 1200 mm Wx maximum height 1515 mm using boiling water proof marine plywood in thickness 19mm. The case shall have a 10mm thick museum glass with one side being opearable. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

OFF POTS DISPLAY

Supply and installation of a floor mounted display case of size 2100 mm L x 550 mm Wx height 750 mm using boiling water proof marine plywood in thickness 19mm. The case also has a false wall of size 2100mm x 2100mm with thickness 75mm and 25mm ply on top. The case shall have a 6mm thick museum glass with three sides sealed and the 4th side being opearable using slider of height 300mm. The structural frame work shall be made out of extruded aluminium sections. the display shall be executed as per the given drawing as approved by the architect.

PANEL

Supply and installation of a wall mounted plywood panel of thickness 25mm using boiling water proof marine plywood.

BLOCK ADHICHANLLUR B BLOCK

FALSE WALL

Provision of false wall of thickness 0.1m made using a frame work of 1" x 2" aluminium extruded box sections as frame work. On one side the frame work shall be covered using a 19mm thk marine water proof ply finished with two coats of putty and 2 coats duco in required colour.

FLOOR MOUNTEDINDIVIDUAL OBJ DISPLAY

Supply and installation of a display case of Base size 700mm x 600 x 150mm. Behind this is a 100mm thk false wall of size 600 x 2400. Above the base is placed a pedestal of overall size 300mm x 300mm x 1200 using a frame work of 1" x 2" aluminium extruded box sections as frame work.using 19mm thick marine waterproof plywood with operable shutters of sliding type is needed to be exactly executed as per drawing. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

Pedestal Display

Supply and installation of a display case of false wall of size 1500 mm x 2100 x 100mm. In front of this is a pedestal of size 600 x 450 x 750mm using a frame work of 1" x 2" aluminium extruded box sections as frame work using 19mm thick marine waterproof plywood. the pedestal has a glass case of height 350mm with operable shutters is needed to be exactly executed as per drawing. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

Wall Recessed Display

Supply and installation of a display case comprising of half recessed cases of size 500mm x 300 x 1600mm and 4 half recessed cases of size 350 x 500 x 300mm. Overall size of the case is 3850 x 3750 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case shall have a duco finish and have an operable pull out type glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

Slanting display

Supply and installation of a display case of false wall of size 1700 mm x 4000 x 100mm. In front of this is a base of size 1700 x 600 x 750mm using a frame work of 1" x 2" aluminium extruded box sections as frame work using 19mm thick marine waterproof plywood. the pedestal has a glass case of height 200mm with operable hydraulic shutters is needed to be exactly executed as per drawing. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

ISLAND DISPLAY

Supply and installation of a floor mounted display case of size 1500 mm L x 750mm Wx maximum height 750 mm using boiling water proof marine plywood in thickness 19mm to be exactly executed as per drawing. The case shall have a duco finish and the smaller pedestals have a mounted glass case of height 250 mm made from 6mm thick museum glass with three sides sealed with silicon sealant and the 4th side being opearable. The structural frame work shall be made out of extruded aluminium sections. The display also has a false wall of height 2100mm placed above the base. the display shall be executed as per the given drawing as approved by the architect.

ISLAND DISPLAY LARGE

Supply and installation of a floor mounted display case of size 3800 mm L x 1500mm Wx maximum height 1000 mm using boiling water proof marine plywood in thickness 19mm to be exactly executed as per drawing. The case shall have a duco finish and the smaller pedestals have a mounted glass case made from 6mm thick museum glass with three sides sealed with silicon sealant and the 4th side being opearable. The structural frame work shall be made out of extruded aluminium sections. The display also has a false wall of height 4000mm placed above the base. the display shall be executed as per the given drawing as approved by the architect.

Mound display

Supply and installation of a display case of false wall of size 12500 mm x 600 x 100mm. In front of this is a base of size 1700 x 600 x 750mm using a frame work of 1" x 2" aluminium extruded box sections as frame work using 19mm thick marine waterproof plywood to be exactly executed as per drawing. The case shall have a duco finish.

Female figurine display

Supply and installation of a display case of Base size 800mm x 800mm x 250mm. Behind this is a 100mm thk false wall of size 800 x 4000 using a frame work of 1" x 2" aluminium extruded box sections as frame work.using 19mm thick marine waterproof plywood is needed to be exactly executed as per drawing. The case shall have a duco finish.

SLANTING DISPLAY

Supply and installation of a display case of size 2800mm x 600mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The slanting base shall have a clear acrylic base 8mm thick with back lighting. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included. the vertical part of the display will also house a description board of size 1125mm x600mm which is made of stretch film and backlit.

CANTILEVERED DISPLAY

Supply and installation of a display case of size 3500mm x 550mm x 2450 mm using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. This display has a back panel and a cantilevered counter with glass casing and a slanting board for text. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using locks and hinges included.

Text panel display

A floor mounted false wall partition of size 1350mm x 2400 x 100mm thk using a frame work of 1" x 2" aluminium extruded box sections as frame work.with 19mm BWP marine ply on one side finished with ducoto be executed exactly as in drawing.

Iron rings display

Supply and installation of a display case of size 2800mm x1500 x 3600mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion. to support the glass case the overall fram shall be made out of 1" aluminium box sec powder coated black using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, using

Arrow display

Supply and installation of a display case of size 1500mm x1000 x 900 mm max height using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with operable shutters is needed to be exactly executed as per drawing. The case shall have a duco finish and have recesses with acrylic stems of 1 inch dia to hold the arrows

SLANTING DISPLAY WITH WALL PANEL

Supply and installation of a display case of size 1735mm x 500mm x 800 mm using 19mm thick marine waterproof plywood is needed to be exactly executed as per drawing. the quote shall include the cost of acrylic holders which are needed to pin the objects onto vertical/ slanting boards. The slanting base shall have a clear acrylic base 8mm thick with back lighting. The case shall have a duco finish and have an operable glass case in 6mm thick museum glass with anti reflective coating, with hydraulic operable glass case of height 300mm using locks and hinges included. the vertical part of the display will also house a description board of size 11450mm x650mm and 100mm thickness .

iron daggers display

Supply and installation of a display case of size 1950 mm x550 x 750 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass hydaulic operable shutters is needed to be exactly executed as per drawing. behind this is a wall panlling of size 1950 x 2450 and 100 mm thickness with stretch film for text. The case shall have a duco finish using locks and hinges included.

L shaped display

Supply and installation of a display case of overall length 2690 x 2400 ht false wall abutted by a cantilevered display case of size 1350 mm x350 x 200 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass slide operable shutters is needed to be exactly executed as per drawing. height of the glass case is 350mm. The case shall have a duco finish using locks and hinges included.

Slanting hopscotch display

Supply and installation of a display case of size 2700 mm x 450 x 750 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass shutters is needed to be exactly executed as per drawing. behind this is a wall panlling of size 1350 x 2450 and 100 mm thickness for text. The case shall have a duco finish using locks and hinges included.

tc pipe

Supply and installation of a display case of size 2600 mm x 750 x 1100 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass shutters is needed to be exactly executed as per drawing. behind this is a wall panlling of size 2600 x 1250 and 100 mm thickness for text. The panel shall also have a partial stretch film to accomodate back lit text. A slanting caption box shall also be provided as in the drawing.The case shall have a duco finish using locks and hinges included.

tc balls

Supply and installation of a display case of size 1750 mm x 600 x 750 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass shutters of height 250mm with bottom slider opening is needed to be exactly executed as per drawing. behind this is a wall panlling of size 1750 x 2400 and 100 mm thickness for text. The panel shall also have a partial stretch film to accomodate back lit text.The case shall have a duco finish using locks and hinges included.

lvl display for habitation

Supply and installation of a display case of size 1750 mm x 600 x 750 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass shutters of height 400mm with bottom slider opening is needed to be exactly executed as per drawing. behind this is a wall panlling of size 1750 x 2400 and 100 mm thickness for text. The panel shall also have a partial stretch film to accomodate back lit text.The case shall have a duco finish using locks and hinges included.

L shaped display

Supply and installation of a display case of overall length 8300 x 4000 ht x 820 depth false wall housing a display of size 8100 mm x 720 mm depth x 1800 mm ht using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass with operable shutters is needed to be exactly executed as per drawing. The display has panels which will have a partial stretch film to accomodate back lit text.The case shall have a duco finish using locks and hinges included.

lvl display for habitation

Supply and installation of a display case of size 1400 mm x 400 x 750 mm using a frame work of 1" x 2" aluminium extruded box sections as frame work for the ply portion using 19mm thick marine waterproof plywood with 6mm thick anti reflective museum glass box of size 1400 x 300 x 100 mm with hinge and piston lifting opening is needed to be exactly executed as per drawing. behind this is a wall panlling of size 1400 x 4000 and 100 mm thickness for text. The panel shall also have a partial stretch film to accomodate back lit text.The case shall have a duco finish using locks and hinges included.

RAASI BUILDERS (BID ID -1522527)

NK Engineering Construction (BID ID -1522475)