Construction of 2x40 MVA 132KV AIS S/S Unchahar, Raebareili

Total Price for Supply of Equipments and Material and Light Luminaires S -1

Total Price for Handling, Erection, Testing & Commissioning Charges S - 2

Total Price for Supply of Mandatory Spares S - 3

Total Price for Civil Works S-4

Total Price for Electrical & Civil works ([S-1]+[S-2]+[S-3]+[S-4])

Seal of Company

Designation ……………

FOR 2x40MVA, 132/33 KV AIS SUB-STATION UNCHAHAR, RAEBARELI AGAINST SPECN. No. ESD-682

Name of Bidder

SCHEDULE- 1

SCHEDULE OF QUANTITIES & PRICES FOR SUPPLY OF EQUIPMENTS/MATERIALS AND SUPPLY OF LIGHT LUMINAIRES FOR 2x40MVA, 132/33 KV SUB-STATION UNCHAHAR, RAEBARELI AGAINST SPECN. No. ESD-682

Transformer

STATION TRANSFORMER,250KVA,36/0.415KV

Circuit Breaker

SF6 CB,145KV,3150A,40KA

VCB,36KV,2000A,31.5KA

Current Transformer (CT)

CT 145KV 800-400-200/1A,(Polymer type) 3C,40/1,0.2S

CT 145KV,400-200-100/1A,(Polymer type) 3C,40/1,0.2S

Terminal CONNECTOR, for CT,145KV,TWIN PANTHER

JUNCTION BOX,CT,145KV

CT 36KV 800-400/1A,(Polymer type) 3C,0.2S (with Terminal Connector)

CT,36KV,400-200/1A,(Porcelean type) 2C,0.2S (with Terminal Connector)

36kV CT Junction Box

Potential Transformer (PT)

145 kV Potential Transformers 50 VA

Terminal connector for 145 kV PT

132 kV PT Junction Boxes

36kV Potential Transformer with terminal connector 50 VA

36kV PT Junction Box

Isolator

145kV 1250 Amp. Line Isolators with one earth switch (Motorised) without post insulator

145kV 1250 Amp, Bus Isolators without earth switch (Motorised) without post insulator

145kV 1250 Amp.Tandem Isolators (Motorised) without post insulator

36kV 1250 Amp,Line Isolators with Post Insulators with one earth switch

36kV1250 Amp. Bus Isolators with Post Insulators and without earth switch

36kV Drop Out Fuse Set with Post Insulator

Post Insulator

145kV Post Insulator

36KV Post Insulator

Surge Arrestor

120 kV Polymer type Surge Arrestor

30 kV Polymer type Surge Arrestor

CRP & SAS ( as per Technical specification of SAS)

Rotational under frequency Relay Panel 145KV

132 kV T/F Control & Protection Panel for 40 MVA T/F

132 kV Simplex Feeder C&R Panel

132 kV Simplex type Bus Coupler Panel SAS

132 kV Transfer Bus Control Panel (TBC)

33kV Triple Feeder C&R Panel

SAS (complete set)

Optical fibre reqd. for SAS

Battery & battery charger

110 V, 200 AH Batteries complete Set lead acid

Battery Charger for 110V, 200AH Batteries

LT Switchgear

110 V DC Distribution Board

415 V AC Distribution Board

415 V AC Lighting DB

Bay Marshilling Kiosk for 132 kV Switchyard

Capacitor Bank & its Accessories

2x5 MVAR, 33kV Capacitor Bank Unit along with following equipment

Simplex Type Control & Relay Panel for 33kV Capacitor Bank

VCB,36KV,2000A,31.5KA

SURGE ARRESTOR,30KV

3-Phase Reactor

CT,36KV,400-200/1A,2C,0.2S (with Terminal Connector)

JUNCTION BOX,CT,36KV

ISOLATOR,36KV,1250A,W E/S (LINE ISOLATOR WITH POST INSULATOR)

ISOLATOR,36KV,1250A,W/O E/S (BUS ISOLATOR WITH POST INSULATOR)

36kV NCT Ratio 5/1A

Terminal Connector for 36kV NCT

Junction Box for 36kV NCT

PT,3 PHASE,36KV

CONNECTOR,TERMINAL,CT/PT Terminal Connector for 3-Phase PT

1.1kV PVC FRLS Unarmoured Copper Control Cable

2 Core x 2.5 Sq.mm

4 Core x 2.5 Sq.mm

6 Core x 2.5 Sq.mm

1.1kV PVC FRLS Unarmoured Aluminium Power Cable

3.5 Core x 400 Sq.mm

3.5 Core x 95 Sq.mm

3.5 Core x 50 Sq.mm

Structure & Earthing Materials

Lattice Type Galvanised Main & Auxiliary Structure with MS angles, channels, plates, nuts, bolts, step bolts, U bolts, spring washers, etc. and any other required materials

40mm MS Rod for Main Earthmat

40mm dia, 3 Mtr MS Earth Electrodes

Energy Meter(SAMAST)

3P4W interface energy meter (ABT) of 0.2S class

Network switch-16 Port, (14Cu+2FO)

Data Concentrator(DCU)/Communication Gateway(IG)

LAN Cable (average one roll per S/s 300 Mtr)

PVC conduit pipe-3/4"

OFC cable armoured(6P) along with HDPE conduit pipe 32 mm

LIU(Line interfacing unit) with patch chord and any other accessories for fibre cable ( to be used for extending length of ETHERNET cables)

Switch Network 8 port, 6CU+2FO

Common metering cubicle for meters, DCU, switch for 8 IEM

Conductors

ACSR Moose

ACSR Panther

70kN Antifog Disc Insulators

Hardware fittings

Single Tension Fittings Suitable for

ACSR Moose

ACSR Panther

Single Suspension Fittings Suitable for:

ACSR Moose

ACSR Panther

PG Clamps suitable for

Moose/ Moose

Moose /Panther

Panther / Panther

Bus Post Clamp suitable for

Panther

Twin Panther

Moose

Twin Moose

Fire fighting Equipment

Portable AFF mechanical foam type Fire Extinguisher complete with initial charge hose pipe and all other accessories and fittings as per IS 1024 trolley mounted 50 lit. cap.

Supply of following fire extinguisher carbon dioxide (CO2) as per IS Specn. No. 2878/1986

Supply of sand buckets as per tech. Specn.

Supply of sand buckets stand suitable for 10 nos. bucket as per tech. Specn.

Fire protection and alarm system comprising of smoke & heat type detectors for 132 kv S/s

100 kVA Silent type DG set confirming to latest MoEFCC/CPCB guidelines

GI perforated trays of various sizes for all cable trenches in switchyard, control room including fixing for 132 kV S/s

GI perforated cable tray (225/250 mm)

GI perforated cable tray (75 mm)

Lighting and Luminaires

Supply of Complete fitting of Street Light Luminairs with LED Lamp 110 to 130 Watt, with all accessories (make Philips/CGL/Bajaj) Confirming to IP:65

Supply of Complete fitting of Post Top Lantern with all accessories with LED Lamp 40 to 45 Watt (make Philips/CGL/Bajaj) Confirming to IP:65

Supply of 15W LED Lamp (make Philips/CGL/Bajaj)

Supply of Complete fittings of 18/20 Watt LED Tube Light (make Philips/CGL/Bajaj)

Tool & Plants

Thermovision Camera (640x480 px) SATIR/FLIR Make

5 kV Digital Insulation tester (Megger or equivalent make )

Digital Multimeter (4 1/2 digit) (Motvani or equivalent make )

Digital Clamp-on-meter (Digital, 0-300-600A)

Earthing/Discharge Rod having, 25 sq. mm. copper cable

Self Supported Aluminium Ladder

Fibre Optic Terminal equipment(FOTE) SDH( STM-16)

Base equipment suitable for 04 directions in subrack fully equipped with all necessary common cards, power supply cards, other hardware & accessories including 10 Nos. optical patch cords of lengths as per site requirements, DDF etc. with redundant CPU.

Short Haul, STM-16, 1310nm SFP Transceiver - S16.1

Long Haul, STM-16, 1310nm SFP Transceiver- L-16.1

Long Haul, STM-16, 1550nm SFP Transceiver- L-16.2

E1 Interfaces (120 Ohm) ( 32 Interfaces with 2 Cards)

VOIP Phone

L2Etherner Interfaces 10/100 Base T (16 Interfaces with minimum 2 cards)

Equipment cabinet for SDH and DTPC 2200mm (h) including 100mm base, w x d should be suitable for 19" or 23" Rack

MDF (200 Pairs), mounted in cabinet

04 command standalone Digital Tele-Protection Cuupler (DTPC) fully equipped with necessary common cards power Supply Cards other Hardware accessories Connectors Cables Subtrack with E I path cords set of 04 etc.

CCTV System

CCTV System for 132 kV Substation

Air Conditioner (AC) Unit (Hitachi/LG/O'Gen/Daikin/Voltas/Bluestar make)

2 Ton , 5 Star, Split AC along with Stablizer (5KVA)

TOTAL

Seal of Company

Designation ……………

FOR 2x40MVA, 132/33 KV SUB-STATION UNCHAHAR, RAEBARELI AGAINST SPECN. No. ESD-682

Name of Bidder

SCHEDULE- 2

FOR 2x40MVA, 132/33 KV SUB-STATION UNCHAHAR, RAEBARELI AGAINST SPECN. No. ESD-682

Transformer

EREC 40 MVA,132/33KV TRF

EREC 250KVA,33/0.4KV TRF

Circuit Breaker

EREC OF 145KV CB

EREC OF 36KV VCB

Current Transformer (CT)

EREC OF 145KV CT

EREC OF JB FOR 145KV CT

EREC OF 36KV CT

EREC OF JB FOR 36KV CT

Potential Transformer (PT)

EREC OF 145KV PT

EREC OF JB FOR 145KV PT

EREC OF 36KV PT

EREC OF JB FOR 36KV PT

Isolator

EREC OF 145KV LINE ISO W/1ES

EREC OF 145KV BUS ISO

EREC OF 145KV TANDEM ISO W/1ES

EREC OF 36KV LINE ISO

EREC OF 36KV BUS ISO

EREC OF 36KV DROP OUT FUSE SET

Post Insulator

EREC OF 145KV POST INSULATOR

EREC OF 36KV POST INSULATOR

Surge Arrester

EREC OF 120KV LIGHTNING ARRESTER / SURGE ARRESTOR (POLYMER TYPE)

EREC OF 30KV LIGHTNING ARRESTER / SURGE ARRESTOR (POLYMER TYPE)

CRP & SAS (as per Technical Specification of SAS)

EREC OF UNDER FREQUENCY RELAY PANEL

EREC OF 132KV RELAY/CONTROL PANEL PWR TRF

EREC OF RELAY/CONTROL PANEL TBC

EREC OF RELAY/CONTROL PANEL BUS COUPLER

EREC OF RELAY/CONTROL PANEL FOR FDR

EREC OF 33KV TRIPLE FDR CRP

EREC OF SAS PANEL

EREC OF OPTICAL FIBRE FOR SAS

Battery & Battery Charger

EREC OF 110V BATTERY SET

EREC OF 110/48V BATTERY CHARGER

LT Panels

EREC OF 110V DCDB

EREC OF 415V ACDB

EREC OF LIGHTING DIST BOARD

EREC OF BAY MARSHALLING KIOSK AT 132KV SWITCHYARD

Capacitor Bank & its Accessories

EREC OF COMPLETE 33KV CAPACITOR BANK 2X5MVAR IN ALL RESPECT

Cable

1.1 KV PVC FRLS Unarmoured Copper Control Cable

LAYING 2CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT)

LAYING 4CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT)

LAYING 6CX2.5SQMM UNARM CTRL CABLE including Terminations of cables (COMPLETE IN ALL RESPECT)

1.1 KV PVC FRLS Unarmoured Alluminium Power Cable

LAYING 3.5 core * 400 sq. mm including Terminations of cables (COMPLETE IN ALL RESPECT)

LAYING 3.5 core * 95 sq. mm including Terminations of cables (COMPLETE IN ALL RESPECT)

LAYING 3.5 core * 50 sq. mm including Terminations of cables (COMPLETE IN ALL RESPECT)

Structure & Earthing Material

EREC,STRUCTURES, MAIN/AUX, INCL ACCS: with MS angles, channels, plates, nuts, bolts, step bolts, U bolts, spring washers, etc. and any other required material

LAYG MS BAR 700MM-40MM DIA 40mm for Main Earthmat

LAY,ELECTRODE,MS ROUND,40MMX3M,BLW GND 40mm Dia MS Electrode (3 M Long)

FRESH EARTHG,W/FLAT,75X10MM

FRESH EARTHG,W/FLAT,50X6MM

FRESH EARTHG,W/FLAT,25X6MM

Energy Meter

EREC OF ABT ENERGY METER

EREC OF ABT ENERGY METERING PANEL with one main & one check rack

INSTALLATION,DCU/GATEWAY/ETC including installation of Network Switch-16 Port, (14Cu+2 FO with FO Communication module (industrial frade), LIU (Light Interfacing Unit) with patchcord & accessories, Network Switch-08 Port, Data Concentrator (DCU)/ Communication Gateway (IG), laying of Lan Cable, PVC Conduit Pipe-3/4, OFC Cable Armoured (6P), HDPE Conduit Pipe 32mm

Stringing of Conductors

Stringing of Bus bars comprising of Conductors Tension & Suspension stings complete with anti fog type disc insulators, tension & suspension clamps, PG clamps, Bus post clamps, connectors, earth wires and all other required material for

132 KV Main Bus I & II

132 KV Transfer Bus

132 KV Jack Bus for

Feeder

40 MVA Transformer

Bus Coupler

33 KV Main Bus

33 KV Auxilliary Bus

JUMPERING TRF & ASSOC. EQUIP. Baywise interconnection of equipments with specified conductors ( jumpering ) for complete substation including but not limited to: 1.40 MVA Transformer bay including 132 KV &33KV side bays 2. 132 KV Feeder Bays 3. 132 KV Bus Coupler Bay 4. 132 KV Transfer Bus Coupler Bay 5. 33 KV Feeder Bays 6. 33 KV Bus Coupler Bay 7. 33 KV Bay for station Transformer (COMPLETE IN ALL RESPECT)

Fire Fighting equipments

EREC OF FIRE FIGHTING SYSTEM (COMPLETE IN ALL RESPECT)

DG Set

EREC OF 100 KVA DG SET conforming to latest MoEFCC/CPCB guidelines

Cable Tray

INSTALL,TRAY,CABLE,INCL FABRICATION/ETC

FOTE Equipments

ERECTION/LAYING/T&C,STM-16,FOTE Erection of Fiber Optic Terminal Equipment (FOTE) SDH (STM-16) including but not limited to installation /erection of : 1. Base equipment suitable for 04 directions in subrack fully equipped with all necessary common cards, power supply cards, other hardware & accessories including 10 Nos. optical patch cords of lengths as per site requirements, DDF etc. with redundant CPU. 2. Optical Base Card for 04 directions (STM-16) 3. Short Haul & Long Haul 4. E1 Interfaces & L2 Etherner Interfaces 5. Equipment cabinet for SDH and DTPC 2200mm (Alongwith 110V to 48V DC-DC Converter) 06 VOIP Phone 7. MDF (200 Pairs), mounted in cabinet 8. 04 command standalone Digital Tele-Protection Coupler (DTPC) fully equipped with necessary common cards power Supply Cards other Hardware accessories Connectors Cables Subtrack with E I path cords set of 04 etc. (COMPLETE IN ALL RESPECT)

CCTV system complete in all respetcs

Air Conditioner (AC) Unit system complete in all respetcs

LIGHT LUMINAIRES

OUTDOOR LIGHTING

PERIFERY AND ROAD LIGHTING

Supply and fixing of steel round pole 9.0 mt long in 1:4:8 cement concrete with 40mm brick ballast in size of 450x450x1900 and plastering of 300mm length of concrete above ground level

Supply of junction box of size 280x225x150mm made of 16 SWG sheet with grey painting suitable for 2x4x6 C sq mm incoming cable & 2x4x6 C sq mm out going cable fitted with 3 Nos. HRC Fuse link of 5A, Cable glands, neutral link, terminal block etc. and Fixing of junction box on M.S. round pole with the help of M.S. Clamp

Fixing of complete fitting of light luminaries with LED Lamp 110 to 130 Watt at designated height on light pole including taking out cable from junction box to light fixtures from inside pole. cable terminations and it’s testing and commissioning and earthing with 12 No. SW GI Wire

Supply & fixing of GI pipe bend of 35mm dia 'B' class 2.5 meter long and bended at one end by quarter circle in 0.5 meter for cable entry to junction box fitted on steel round pole

Painting of M.S. Round pole with first quality Asian /Nerolec/Burger paint, one coat of Red Oxide primer and two coats of Aluminium paint.

Making 3 Nos. of strips of 450mm height from plinth with Post Office red colour in bottom & top and white colour in middle on each light pole of 150mm dia on M.S. Round pole and writing No. of pole.

SWITCHYARD LIGHTING

Supply of junction box of size 280x225x150mm made of 16 SWG sheet with grey painting suitable for 2x4x6 C Sqmm incoming cable & 2x4x6 C sqmm out going cable fitted with 3 Nos. HRC Fuse link of 5A, Cable glands, neutral link, terminal block and Fixing of junction box on Columns with the help of 50x6mm G.I. Clamp

Supply and fixing of GI pipe bend of 35mm dia 'B' class 2.0 meter long and bended at one end by quarter circle in 0.5 meter for cable entry to junction box fitted on column

Supply and fixing of Light bend of 50mm dia GI 'B' class pipe 1.5 meter long bended at 1 meter at an angle of 300 for 250W HPSV light in Switchyard.

Fixing of complete fitting of LED 110 to 130 Watt light luminaries at designated height on Column with the help of GI clamps & Light Bend cable terminations and it’s testing and commissioning and earthing with 12 No. SW GI Wire.

LAWN LIGHTING

Supply & fixing of 'B'type light pole 2.5M long and fixing of cable bend pipe & its concreting in the ratio of 1:2:4 with 20mm stone granite and cement concrete in the size of 500x300x300mm including excavation, back filling, curing etc. to complete the job

Supply of Junction Box of size 180x150x100mm made of 16 SWG steel with grey painted suitable for 2x2x6 C Sqmm cable fitted 2 Nos. HRC Fuse link of 5A & 1 No. Neutral link terminal block, cable glands etc and fixing of junction box on light pole with the help of M.S. clamps and then making plinth of size 225x300x300 in the ratio of 1:2:4 cement & coarse sand with 20mm granite with JB embedded in the plinth and the top surface of plinth being tapered from all four sides of plinth with 30mm height in the centre including all associated works of finishing, plastering etc.

Supply & fixing of 50mm dia GI pipe light pole of 'B' class quality

Supply & fixing of 'J' bend of 25mm dia GI pipe of 'B' class for cable entry

Assembling and fixing of complete fitting of post top lantern with LED Lamp 40 to 45 Watt over the light poles, cable terminations, testing & commissioning etc.

Making 3 Nos. of strips of 150mm height from plinth with Post Office red colour in bottom & top and white colour in middle on each light pole of 50mm dia

GATE LIGHTING

Supply & fixing of junction box of size 180x150x 100mm as specified above at si.no. C_2

Assembling and fixing of Complete fitting of post top lantern with LED Lamp 40 to 45 Watt with cable terminations, testing and ,commissioning

CABLE LAYING AND TERMINATIONS

Laying of 4cx2.5 sq mm copper control cable from control room to various point and for lawn lighting in excavated trench

Laying of 2cx2.5 sq mm Copper control cable for lighting in switchyard periphery, road etc. in excavated trench

Taking out above cable from junction box to light fittings fixed over the column by fixing GI clamps of 40x5mm flat with each crossed bracing on structures proper dressing etc

Excavation of trench of size 300 x 600 mm for laying of cable, putting ganga sand & Ist class bricks over the cable and then earth filling etc.

Supply & fixing of Cable marker made of cast iron

INDOOR LIGHTING FOR CONTROL ROOM AND STORE

Wiring for light point/fan point/ Exhaust Fan point/Call bell point with 3/22, 1.5mm2 PVC insulated copper conductor in PVC conduit concealed in wall with 2.24mm dia bare copper earth continuity wire & piano type switches etc. complete in all respect.

Wiring for 3 Pin 5A light plug point socked outlet on existing switch board with 3/22, 1.5mm2 PVC insulated copper conductor in PVC conduit concealed in wall with 2.24mm dia bare copper earth wire continuity along with piano type switch complete in all respect.

Supply and fixing of metal box of size 180x100x80mm deep in recess with suitable size of white laminated sheet cover in front including providing & fixing 3 pin 15 A socket & switch connection piano type with 7/22, 4.0mm2 PVC insulated copper conductor concealed in wall with 2.24mm dia bare copper earth wire continuity complete in all respect.

Supply & wiring of sub main with PVC insulated copper wire of size & no. as detailed below along with 2.24mm dia bare copper earth wire continuity in PVC conduit concealed in wall complete in all respect.

2x4mm2 with 1 No. earth wire

4x4mm2 with 2 No. earth wire

2x1.5mm2 with 1 No. earth wire

4x1.5mm2 with 2 No. earth wire

Supply & fixing of angle/button holder suitable for LED Lamps complete in all respect

Supply & fixing of Factory Wired in-door decorative luminairs with LED Lamp for ceiling mounting with mirror optic suitable for 2x20/2x18W LED complete in all respect of category 'A' (make Philips/CGL/Bajaj)

Supply & fixing of factory wired in-door decorative luminairs for surface mounting with oval polystyrene diffuser suitable for 1x20/1x18 W LED Lamp complete in all respect of category 'A' make.(make Philips/CGL/Bajaj)

Supply & Fixing of complete set of street light luminair with LED Lamp 110 to 130 Watt complete in all respect with integral control gear of category 'A' make.(make Philips/CGL/Bajaj)

Supply & fixing of factory wired LED light fitting suitable for 1x20W LED complete in all respect of category 'A' make.(make Philips/CGL/Bajaj)

Supply & Fixing of Fancy wall bracket 1x15W LED fittings

Supply & Fixing of decorative ceiling luminairs for 1x10W LED Lamp complete with round twin PVC insulated flexible cord, approved holder complete in all respect with bulb for DC lighting

Supply & Fixing of 1200mm ceiling Fan complete with electronic regulator with double ball bearing and approved colour of category 'A' make as approved by Engineer.

Supply & fixing of 18" Exhaust fan of category 'A' make as approved by the Engineer.

Supply & Fixing of 12" Fresh Air Fan of category 'A' make as approved by the Engineer

Supply & fixing of 6000 capacity Desert cooler of size made of 20 SWG galvanized sheet duly wired fitted with 18" Exhaust fan of cat 'A' make and vertical pump along with stand & other thing required to complete the jobs satisfactorily.

Supply and fixing of Four Pole Isolator of 60/63 A.

Supply and fixing of surface/flush mounting 8 ways SPN Distribution board with MCB complete in all respect.

Supply & fixing of Call bell of approved make on white laminated sheet board including making connection etc. complete in all respect.

Supply & Fixing of 600x800x8mm GI plate vertically for earthing with its top at least 3M below the ground level complete with 20mm dia GI pipe & funnel for watering and one earthing lead of one No. 8 to 10 SWG GI wire within 15mm dia GI pipe up to switch board 30cm square CI frame with hinged cover masonry housing alternate layer of charcoal/coke and salt at least 150mm thick alround etc as per direction of Engineer complete in all respect

Supply & Fixing of Distribution box 6 bay TPNDB with 100 Amp. Isolator and 18 No. SP MCB of different capacity Havells make.

TOTAL

Seal of Company

Designation ……………

FOR 2x40MVA, 132/33 KV SUB-STATION UNCHAHAR, RAEBARELI AGAINST SPECN. No. ESD-682

Name of Bidder:

SCHEDULE- 3

BILL OF QUANTITION FOR SUPPLY OF MANDATORY SPARES PARTS

MANDATORY SPARES

145 kV SF6 Circuit Breaker

Tripping coil for 145 kV CB

Closing coil for 145 kV CB

36kV Vacuum Circuit Breaker

Tripping coil for 36 kV VCB

Closing coil for 36 kV VCB

33kV Triple Feeder C&R Panel (as per technical specifications of SAS issued by UPPTCL)

145 kV Current Transformer (800-400-200-/1-1-1A)(POLYMER TYPE)

145 kV Current Transformer (400-200-100/1-1-1A) (POLYMER TYPE)

36kV Current Transformer(800-400/1A) (POLYMER TYPE) 3-core with terminal connector

36kV Current Transformer(400-200/1A) (PORCELAIN TYPE) 2Core with terminal connector

36kV Potential Transformer with terminal connector

120 kV Polymer type Surge Arrestor

30 kV Polymer type Surge Arrestor

Total

Seal of Company

Designation ……………………………………………………………………….

FOR 2x40MVA, 132/33 KV SUB-STATION UNCHAHAR, RAEBARELI AGAINST SPECN. No. ESD-682

Name of Bidder:

SCHEDULE- 4

Supply of Executive office table size W2400 X D2100 X H750 PLPB Top, Extruded aluminium profile Geeken or equivalent make as approved by E/I. (Model No. EWOKE 1)

Supply of Executive office table size W2000 X D1850 X H750 Particle board top Geeken or equivalent make as approved by E/I. (Model No. EXCLUSIVE 2)

Supply of Back Storage unit size W2250 X D450 X H2200 18 mm PLPB, PVC Edge Banded Tape Geeken or equivalent make as approved by E/I. (Model No. EWOKE 4)

Supply of Back Storage unit size W750 X D450 X H2200 18 mm PLPB, PVC Edge Banded Tape Geeken or equivalent make as approved by E/I. (Model No. EWOKE 4)

Supply & Fixing of High back Revolving chair PP Cushion arm ,Gas lift Leatherite Tapestry Geeken or Equvalent make as approved by E/I (Model No. ALTONA 1)

Supply & Fixing of chair with PP seat back and Powder Coated Metal Frame, Geeken or Equvalent make as approved by E/I.(Model No. GB 403)

Supply of steel almirah size W900 X D450 X H1830 Geeken or equivalent make as approved by E/I. (Model No. GMS 10)

Supply and fixing of blind stripe roller dim out Kazage make or equivalent with Haid rail and all material, T&P and labour required for proper completion of job as per direction & approved by Engineer-In-Charge. (NSI)

Total Rs.

GST Extra as applicable

Seal of Company

Designation ……………