Shifting of 250 KVA Sub-Station along with HT Network for Irrigation Department at Hamdania Colony, Bemina (LIS Bemina) falling under the jurisdiction of ESD Watalkadal, ED-3rd (Turnkey Basis)

Supply, installation, testing and commissioning of S.T. poles 11.0 Meter long swaged Type conforming to ST 410 SP-56, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole, provided at height of 300mm above the planting depth which should be 1.5 mtr (SP 56). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation, testing and commissioning of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole, provided at height of 300mm above the planting depth which should be 1.5 mtr (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, installation, testing and commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation, testing and commissioning of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS.

Supply, installation, testing and commissioning of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Supply, fabrication, installation, testing and commissioning of G.I Channel X/V crossarm Iron / Angle Iron /Flat of sizes including Top Bracket, clamps and collars. (As per KPDCL approved drawing)

Supply, laying, installation, testing and commissioning of 300 mm² Single Core Cable,1.1kV Grade, Un-armoured, XLPE Insulated Stranded Conductor FRLS type including lugs/thimbles/clamps/cable ties.

Supply, Laying, installation, testing and commissioning of 30 mm² ACSR

Supply, Fixing, Testing and commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm