WELCOME MAINT INCLUDING CERTAIN MISC BR WORK IN DHIMAN, JOSHI ENCLAVE AND SINGLE LIVING OFFRS ACCN AND REPAIR TO SUNKEN TILING, FLOORING, JOINERY, PLUMBING, PLASTERING, PAINTING ETC IN QMQS, SINGLE LIVING, OFFRS ACCN, OFFRS MESS AT AFS UTARLAI

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to walls as specified & as directed.

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches /floors fixed to walls complete all as specified and directed by Engineer-inCharge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash.

Material & Labour for complete removal of existing treatment of wall of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of walls and applying two coat of white wash on wall all as specified.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying one coats of white wash.

Material and Labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.

M & L for complete removal of existing treatment on ceiling and applying two coats white wash complete all as specified

M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including removing of undesired nails and filling the holes, undulations etc with putty and applying one coat of oil bound distemper, white or tinted complete all as specified and directed.

Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of avg. thickness 1.5 mm of wall care putty complete all as specefied and directed by Engr-in charge .

M & L for complete removal of existing treatment and applying two coat of oil bound distemper, white or tinted over a coat of primer incl filling of wall putty in holes, undulated area etc complete all as specified and directed.

M&L for applying one coat of cement base paint including preparation of old decorated or old plastered surfaces of wall / column / roof projection / chajja / facia complete all as specified.

Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Supply & Fix as in repairs 3 mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed

S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters.

Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.

M&L for 20-25mm dia stainless steel curtain rod with brackets and knobs/final at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F in repairs first class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads from site.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S & F 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.

S&F in repairs Towel rack of size 600 mm of grade 304 complete all as specified and directed.

S&F in replacement Light mirror light fitting 2' long, 10/8 Watt single phase 230 V, metallic decorative type, flexible in light position with extruded heat shrink complete all as specified and directed.

S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.

S&F for galvanised steel tubing 15 mm dia (ISI) marked medium grade with necessary fittings lie tees, elbows, sockets, reducers, bends etc including necessary cutting, threading laid in trenches/floors, fixed to walls including taking down old GI Steel tubing with connections of same dia etc complete all as specified and directed

S & F 100mm size mild steel butt hinges medium weight cold rolled mild steel 100mm long.

S&F in repairs 15mm dia wall mixer, chromium plated with telephonic shower arrangements/ L-bend for shower type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.

Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down inclduing necessary repairing old iron mongry, if required compete all as specified and directed.

S&F in repairs chromium plated shower rose 125 mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm all as specified.

S&F GI snap grid frame work for Calcium, silicate false ceiling as per site requirement complete all as specified & directed.

S&F Providing and fixing Gypsum Board 8-10 mm thick laminated with pvc decorative type sheet at one face and Pvc film on another face in ceiling fixed with screw as per manufacturers instructions complete all as specified

S & F Solid PVC Wall Lining consisting of 5mm thick one side Pre laminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

M&L for granite(of any type) work rubbed and polished in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in CM 1:6.including demolition of old stone slab laid bedded and pointed in any mortar complete all as specified and directed.

S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms )

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

S & F Seamless calcium silicate ceiling madeout of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish

S&F 18/19mm WPC board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboards, alimirah shutters or other places complete all as specified and directed. (Sample like colour shall be as approved by GE)

S&F 100mm size stainless steel handle with stainless steel screws fixed to kitchen cupboards / drawer complete all as specified and directed.

Supply and fixed in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with "P" or "S" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge .

M & L for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed.

S&F in repair 2.0mm thick stainless steel grade 202 cutlery tray perforated type each size 450mm x 500mm x 100 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in repair 2.0mm thick stainless steel grade 202 cup and saucer tray perforated type each size 450mm x 500mm x 100 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in repair 5.0mm dia stainless steel grade 202 thali basket / tray with chrome nickle finishes each size 450mm x 500mm x 200-300mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S&F in reapir, 2mm thick stainless steel grade 202 plate basket / tray perforated type with partition if required for glass and bowl storage with chrome nickle finishes each size 450mm x 500mm x 200-300 mm for modular kitchen drawer including 5mm dia stainless steel wire railing complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specifierd and directed.

S & F in repair 15mm bore Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed.

S&F stainless steel telescopic Nickel chrome plated finish ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall be Approved by GE.

S&F in repair stainless steel telescopic Nickel chrome plated finish ball bearing channel for modular kitchen/drawer in kitchen including repair to modular kitchen drawer complete all as specified and directed. Note : sample of stainless steel telescopic channel shall beApproved by GE.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Supply & Fix in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average widht of apeture 1.18 mm complete all as specified

S&F 3way 3D hydraulic auto adjustable (Soft closed) concealed cabinets hinges stainless steel grade 202 with chrome nickle finishes each size 116x60mm mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F factory made flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters .

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

S&F Aluminum tower boltes of extruded section of size 150mm complete all as specified and directed.

M & L factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass pens and othe

r shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

M&L for spl treatment to sunken portion (inc necessary dismantling of tiles and PCC along with req PCC at site of mix 1:2:4 of req thickness) with 10mm thck plaster in CM 1:4 with WPC Liq complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 tck plast in CM 1:4 mixed with complas 421 in sunken portion of WC and CI pipe joint shall be filled inc filling of lean conc 1:5:10

S & F for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4.

S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.

All as per Sl item 61 above but of size 75 X 60 mm as in cupboard frames.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165.

S&F fixed type anodised aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection all as specified.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate in filling back of PS Chawkhat/frame and in bed blocks to hold fasts including making good to the disturbed portion complete all as specified and directed.

M & L rendering 15 mm thick in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement and including application of two coats of Dr fixit or equivalent SBR latex slurry solutionmixing with cement for water proof surface of sunken (as per manufacturer's instruction) Note :- WPC shall be measured & paid sepuretely.

Supply only intergral water proofing compound.

S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.

S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and lower panel including rubber gasket, aluminum beading compete all as directed.

Dismantaling of water tanks capacity exc 250 ltr & n.exc 500 ltr and removing to store

Ditto all as per item No. 77 above but exc 500 Ltrs and n.exc. 1000 Ltrs capacity.

M & L PCC 1:5:10 type D2 (using 40mm graded stone aggregate) all as specified and directed

Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars,covers, jafri jali etc. and removing from site all as specified and directed.

Providing precast cement concrete louvres and jallies (Type B1 1:2:4 (12.5 mm graded aggregate), 35 mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4.

Demolition of stone/brick / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L PCC for 20cm thick precast cement concrete Type C1 1:3:6, block masonry with solid block, set in CM 1:6 all as specified & as directed.

S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.

S&F in repair cast iron floor trap,nahani traps 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified.

S&F in repairs branch pieces single 'T' 100 mm bore equal or unequal with oval access door

S&F in repair 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured).

S&F in repair 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).

S&F in repairs 100 mm CI connection socket to fit out let of WC

S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position , inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.

All as per item No. 85 above but 100mm dia of outlet for WC's without grating complete all as specified and directed.

Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) 75 mm (internal dia) set in cement mortar .

Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) 100 mm (internal dia) set in cement mortar .

S&F in repair 100 mm bore cast iron bend (any radius) with / without duck’s foot or heel rest.

Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) and including dismantling tilling with cement mortar bedding, removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for polished machine cut kota stone as in slab flooring 20-25 mm thick single piece of each fread over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) including demolition of old stine slab complete all as specified and as directed

S&F in replacement switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F in replacement switch piano flush modular type , single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed.

S&F in replacement LED inverter lamp 12 watt, CDL, B-22 cap, (Pin type), 230 Volt,PF not less than 0.85(min) complete all as specified and directed.

S&F in replacement socket 2 in 1, 3 pin, 16/15 Amp flush modular type (ISI marked), 240 Volts complete all as specified & directed.

S&F in replacement lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

S&F in replacement ceiling rose, surface bakelite, three terminals modular type complete all as specified & directed.

S&F in replacement Bell electric Ding dong AC 240 volt, 50 HZ complete all as specified & directed.

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painting(4 module)

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painti

ng(6 module)

S&F in replacement socket multipurpose 5 pin, 6/5 Amp piano flush modular type, 240 Volts complete all as specified & directed.

Supply only sunken MS boxes and sheet cover of suitable size & white color for modular fitting and making good the disturb and painting(8 module)

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.