REPAIR/REPLACEMENT TO JOINERY, PLUMBING, SANITARY FITTINGS, AND CONNECTED WORKS AT INSIDE AND OUTSIDE OTA UNDER GE STM

Taking down chowkhats or frames with shutters (without taking off shutters from frames) n.exc 1.5sqm including making good disturbed surfaces complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) exc 1.5sqm but n.exc 4sqm each including making good disturbed surfaces complete all as specified and as directed.

Taking down shutters of any description n.exc 1sqm each and removing to store complete all as specified and as directed.

Taking down shutters of any description exc 1sqm and n.exc 2sqm each and removing to store complete all as specified and as directed.

M & L Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for exc half brick but n.exc one brick thick walls complete all as specified and as directed.

S & F for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed complete all as specified and as directed.

S & F 2nd class hardwood rail and style 35mm thick, Factory Made shutters Plain framed (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering rail and stile as per IS: 1003 (Part I), kiln seasoned and supplied and fitted to chowkhats complete all as specified and as directed.

S & F 2nd class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkhats complete all as specified and as directed.

S & F 2nd class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkhats complete all as specified and as directed.

S & F Solid PVC door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying &fixing in opening as per specification & drawing. Note:- (i) Existing wall edges will have to be finished properly in cement plaster 1:4 including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. (ii) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (iii) PCC strip of section 5*5mm will have to be created at bottom including smooth finish in each door opening.

S & F Factory Made Solid PVC Moulded Door Shutter with particle core board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F 100mm size of mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

S & F 75mm size of mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section 125mm size complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 75mm long complete all as specified and as directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm complete all as specified and as directed.

M & L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials of any description and treated with tar or coal tar black paint treating ends of posts backs of chowkats etc. area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F Sheet glass, ordinary quality, 4mm thickness and glazing with oil putty or wooden beading in square n.exc 0.5sqm each complete all as specified and as directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple on any type of door/ windows complete all as specified and as directed.

M & L for securing toughened glass of any description in existing frames of any type of glazed with putty/ beads / adhesive including removing loose or decayed putty/ beads/adhesive and refixing of same surface to match existing work including necessary scaffolding up to height of 15 to 20 metre complete all as specified and as directed.

S & F in repairs 10/12mm thick Toughened glass door/partitions as in hinged doors/partitions/wall fixing (any type of color), bottom patch, pivot top and bottom mount, corner lock patch, partitions automatic door and similar work including cutting to shape, drilling holes required and including lining and all fixing arrangement complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M & L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down the article and refixing in position and exc 6mm but n.exc 9mm thick Welding in repairs n.exc 2.5cm in length complete all as specified and as directed.

Taking up or taking down steel/ CPVC tube of 20mm bore and connections including cleaning for refixing or removal to store and Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/floors including brass elbow, unoin,Tee and male & Female end thread adaptor complete all as specified and as directed.

Taking up or taking down steel/ CPVC tube of 25mm bore and connections including cleaning for refixing or removal to store and Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors including brass elbow, unoin,Tee and male & Female end thread adaptor complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin oval type white, flat back, size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe complete all as specified and as directed. Make:- JAQUAR / CERA

S & F in repairs vitreous china wash down water closet pan (pedestal pattern/wall hunged), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device complete all as specified and as directed. Make:- JAQUAR / CERA

S & F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 ltre capacity with it’s complete accessories, fixed complete including connection to water pipe and PVC 32mm dia flush pipe etc., complete all as specified and as directed.

S & F in repairs brass CP shower rose with or without swivel joints 125mm size complete all as specified and as directed.

S & F Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15mm bore and fixed in repairs complete all as specified and as directed.

S & F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15mm bore complete all as specified and as directed.

S & F in repairs 15mm Bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 15mm 2-in-1 taps, chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S & F PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S & F chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type CP connection and hook fixed in repairs complete all as specified and as directed. Make:- Parry ware Cat No-T9937A1 or equivalent.

S & F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device complete all as specified and as directed.

S & F Corner glass Shelves (with brackets) for bath room fixed in repairs complete all as specified and as directed. Make:- Jaquar (Cat No-CAN-1173 or equivalent).

S & F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails complete all as specified and as directed.

M & L for 18/19mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed in repairs with screws to timber work for Cup Boards complete all as specified and as directed.

M & L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails complete all as specified and as directed.

S & F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) complete all as specified and as directed.

S & F 75mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F Aluminium anodised Hasp and staple, safety type of size 75mm complete all as specified and as directed.

S & F in repairs 25mm dia aluminium coloured powder coated decorative fancy type curtain rods complete all as specified and as directed.

S & F aluminium coloured powder coated decorative fancy type end bracket and knob for 25mm curtain rods complete all as specified and as directed.

S & F cast iron door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed.

S & F in repairs 125mm Double action spring hinges for door shutters, mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for glazed ceramic coloured Double charged joint free tiles in vertical surfaces 350 x 250 x 7mm / 450 x 350 x 7mm/ 600 x 600 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, including cement screed 10mm thick in CM 1:3 complete all as specified and as directed.

M & L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L Dark shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match jointed including cement screed 15mm thick in CM 1:4 complete all as specified and as directed.

M & L Tropicana Double Charged Vitrified Ceramic tiles glossy finished (1000 x 1000mm) 10mm thick (square/ rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match jointed including cement screed 15mm thick in CM 1:4 complete all as specified and as directed.

M & L for Marble work 18 to 20mm thick Abu plain/Makrana doogri/Makrana Adanga/Green Marble/Black Marble for any type (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and the like CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble Makrana white over 15mm thick screed bed in CM 1:4 and providing edge moulding complete all as specified and as directed.

Demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and as directed.

M & L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item no.69 above, but in risers of steps, skirting etc.

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F Modular False ceiling with vinyl laminated gypsum tiles having 8mm thickness, of size 595mm x 595mm the tiles to be fixed with suspension system (Grid) of size 24mm x 32mm , made of hot dipped galvanised steel section to prevent corrosion and the exposed surfaces of grid chemically cleaned capping prepainted /backed in polyester paint. The standard procedure for installation of grids is to be followed, where main runners of standard length of 3600 mm used along with cross section of 1200mm c/c wall angle (size 22mm x 22mm) of the same quality as the grids to be used on the periphery along the wall or partition using screws at 600mm c/c and cross tee (24mm x 23) tube interlocked between main runner at 600mm c/c(max) to form a grid of 600mm x 600mm. The main runner to be hung from the soffit with the help of 4mm dia GI wire hanger with 'L' shape adjuster and 6mm dia wire anchored fastener @ 1200mm c/c (Max) including scaffolding arrangement for ceiling level Make:- Diamond or its eqvt Note:- The work to be carried out by the author manufacturer only.

Providing & fixing false ceiling at (a) all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm (b) Semi With perforated 12mm thick thick micro regular design and patterns having moisture micro regular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC 0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Non combustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main runners of size 15 x 32 mm of length 3000mm,cross-T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Shape level adjuster of size 85 x 25 x 2mm Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall I partition with the help of plastic raw plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. Note:- The work shall be carried out as per specifications, drawing including scaffolding arrangement for ceiling level and as per directions of the Engineer-in Charge.

S & F Powder coated anodised aluminium deco grill of size of mesh not exc 75mm x 75mm, thickness shall approx. be 6mm, decorative type and fixed with suitable aluminium section fixed to alum frame of windows / ventilators complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M & L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement on internal surfaces of wall complete all as specified and as directed.

M & L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w/o using extra cement, mixed with liquid water proofing admixture including scaffolding arrangement (as per manufactures instructions) complete all as specified and as directed. Note:- Liquid water proofing admixture shall be measured and paid separately.

M & L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces over setting coat 5mm thick in CM 1:2 as in chajja/ceiling surfaces and finished even and smooth with out using extra cement including scaffolding arrangement complete all as specified and as directed.

Supply only liquid waterproofing admixture.

M & L for Preparation of new plastered surfaces of ceiling and applying three coat white wash including scaffolding arrangement complete all as specified and as directed.

M & L for Preparation of new plastered surfaces and applying 3mm wall putty and two coat of oil bound distemper over a coat of primer on internal surfaces of walls including scaffolding arrangement complete all as specified and as directed.

M & L for Preparation of new plastered surfaces and a Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and as directed.

M & L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer on internal surfaces of Ceiling including scaffolding arrangement complete all as specified and as directed.

M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.80Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures:- IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydro flame)/STP.Screed bed 20mm thick in CM 1:4 with using waterproofing liquid as per manufacturers instructions. Note:- The work shall be carried out be authorised applicators of manufactures

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

M & L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm, and lightly tampered (area of flashings, etc., shall be added to the roof area including 3 coat of epoxy floor coating paint treatment for existing roof area complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall complete all as specified and as directed.

S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110mm

S & F PVC (SWR) bend 110mm bore complete all as specified and as directed.

S & F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and as directed.

S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 75mm complete all as specified and as directed.

S & F PVC (SWR) bends 75mm bore complete all as specified and as directed.

S & F PVC (SWR) floor trap plain 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.

S & F PVC (SWR) vent cowl 110mm.

S & F in repair Steel rolling shutters, thickness of 1.0mm with outcall bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and as directed.

M & L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

S & F for Linoleum, plain coloured, 2mm thick laid dry in floors including stretching, cutting and fitting including adhesive complete all as specified and as directed.

M & L for Bees-wax polishing on any surfaces of any description, width or girth including cleaning and preparing the surface including scaffolding arrangement for height of n exc 15meter complete all as specified and as directed.

Demolition of unreinforced Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) and disposed off from site complete all as specified and as directed.

M & L 75mm thick cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection & paving, finished even & smooth without using extra cement complete all as specified and as directed.