Supply installation testing and commissioning of 1600A PMCC panel standby and allied finising work of pump house at Stage 1st Choglamsar

Particulars PMCC (Power Motor Control Centre) Panel Supply, Installation, testing and commissioning of 1600A PMCC Panel of appropriate size fabricated out of 14 SWG sheet having required openings / vents and Protection & fitted with accessories as under:- The Panel shall be fabricated out of 2.00 mm CRCA Sheets Modular, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 42 protection) with TP Aluminum Buses, complete with connection, internal wiring, name plates, painting etc. generally as per details furnished below: Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three Enclosure Details ----- Free Standing, Floor mounted, Compartmentalized Design. Material ----- CRS Thickness of sheet steel used ----- 2.00 mm Application ----- Indoor Cable Entry ----- Bottom Painting ----- Shade Siemens grey. INCOMER: a) Distribution bus bar Type -----Electric grade AL with red, blue &yellow tapings of adequate section. Rating ----- 1200 Amp b) Circuit Breaker incoming Type ----- ACB Qty ----- 1 Nos Make ----- L & T / C &S /Schneider/Siemens/ABB No. of poles ----- 4 Rated current-----1250 Amp Type ---- Manual Draw Out, Microprocessor Release with (OC, SC& EF protection) Rated Operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking cap at (415 volt A C , 50 Hz ) ----- 50 KA Type of release ----- Microprocessor OUTGOING: c) Circuit Breaker Outgoing (MOTOR STARTERS) Type ----- MCCB Qty ----- 1 Nos Make ----- L & T / C &S /Schneider No. of poles ----- 3 Rated current-----400 Amp Operation ----- Extended Rotary Handle Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking cap at (415 volt A C , 50 Hz ) ----- 36 KA Type of release ----- Thermal Magnetic d) Line Contactor Qty ----- 2 Nos Make ----- L & T / C &S /Schneider No. of poles ----- 3 Rated current-----400 Amp AC3 Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz e) Semi Conductor Fuses (Hi Speed) Qty ----- 6 Nos Make ----- Buss-man Rated current----- 400 Amp f) Soft Starter Qty ----- 1 Nos Rating:200KW (Heavy Duty ) Amperes:397A Connection: 3 Wire Power Specification -----3 phase, 415 ± 15% v & 50 Hz Programmable Inputs & Outputs. Acceptable Makes: L&T (EMX Series), ABB (PSTX), Siemens (Sirus) Application: Pump - Centrifugal Motor full load current: 400 amperes Connection Method: Bypassed, Inside delta connection • Programmable auto start/stop • 24 VDC auxiliary power supply • Power through operation allows to run soft starter even with one SCR shorted • Emergency run operation ON/OFF push buttons to be provided on the front door Emergency stop push button to be provided. Auxiliary wiring to be provided with suitable protection using MCB’s of suitable ratings Control Transformer 415/220V with 500VA Rating to be provided. g) FASD Starter Qty ----- 1 Nos Rating : 200KW (Heavy Duty ) Main Contactor : 300A Delta Contactor : 300A Star Contactor : 200A Over Load Relay : 135-225A Motor Protection Relay : LCD Display with UV,OV,OL,SPP,UB, Phase Failure Protection user settable ON/OFF push buttons to be provided on the front door Emergency stop push button to be provided. Auxiliary wiring to be provided with suitable protection using MCB’s of suitable ratings h) Circuit Breaker Outgoing (AUXILARY) Type ----- MCCB Qty ----- 2 Nos Make ----- L & T / C &S /Schneider No. of poles ----- 4 Rated current-----100 Amp Operation ----- Extended Rotary Handle Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking cap at (415 volt A C , 50 Hz ) ----- 36 KA Type of release ----- Thermal Magnetic h) Metering Details: Digital voltmeters (1 No) with Selector switch (1 No) Digital Ammeter (5No) with Selector switch (5 No) Make - Rishabh Current Transformer – 1200/5A, 10VA Class 1.0 ( 3 No) Current Transformer – 600/5A, 10VA Class 1.0 ( 12 No) Approved makes of Panels: L&T/Schneider Blockset /Siemens Sivacon Panel should be IEC61439 Part 1 & Part 2 Certification should be required for Sesmic Zone 4 & Inertnal Arc Testing

Automatic Power Factor Controller Panel (150 KVAR) Fitting, Installation, testing and commissioning of 150KVAR Automatic Power Factor Correction Panel of appropriate size fabricated out of 14 SWG sheet having required openings / vents and Protection & fitted with accessories as under:- The Panel shall be fabricated out of 2.00 mm CRCA Sheets Modular, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 42 protection) with TP Aluminum Buses, complete with connection, internal wiring, name plates, painting etc. generally as per details furnished below: Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three Enclosure Details ----- Free Standing, Floor mounted, Compartmentalized Design. Material ----- CRS Thickness of sheet steel used ----- 2.00 mm Application ----- Indoor Cable Entry ----- Bottom Painting ----- Shade Siemens grey. INCOMER: a) Distribution bus bar Type -----Electric grade AL with red, blue &yellow tapings of adequate section. Rating ----- 400 Amp b) Circuit Breaker Incomer Type ----- MCCB Qty ----- 1 Nos Make ----- L & T / C &S /Schneider No. of poles ----- 3 Rated current-----320 Amp Operation ----- Extended Rotary Handle Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking cap at (415 volt A C , 50 Hz ) ----- 50 KA c) Metering & Controller: 1) APFC Relay : Type : 12 Stage Microprocessor based APFC Relay 3 Phase Make : Epcos/Beluk Qty : 01 No 2) Current Transformer : Type : 600/5 Cl:1.0 Burden : 5 VA Qty : 06 No 3) Indicators : Type : LED Make: Ess Bee/RAAS Qty : 15 No OUTGOING: i. Bank 50KVAR x 2 Nos MCCB : 100A/3P/36KA – 2Nos Contactor : 3P Capacitor Duty Contactor 60KVAR – 2 Nos Harmonic Filter : 7% Detuned Harmonic filter 50KVAR – 2 Nos Capacitor : 50KVAR Heavy Duty – 2 Nos ii. Bank 30KVAR x 1 Nos MCB : 63A TPN – 1 Nos Contactor : 3P Capacitor Duty Contactor 30KVAR – 1 Nos Harmonic Filter : 7% Detuned Harmonic filter 30KVAR –1 Nos Capacitor :30KVAR Heavy Duty – 1 Nos iii. Bank 10KVAR x 2 Nos MCB : 32A TPN – 2 Nos Contactor : 3P Capacitor Duty Contactor 12KVAR – 2 Nos Harmonic Filter : 7% Detuned Harmonic filter 10KVAR –2 Nos Capacitor : 10KVAR Heavy Duty – 2 Nos Approved makes of Panels: L&T/Schneider Blockset /Siemens Sivacon Panel should be IEC61439 Part 1 & Part 2 Certification should be required for Seismic Zone 4 & Internal Arc Testing

62mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick 13.9 m* 8 m=111.2 sqm

Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge

Steelwork in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished seamless type tubes

Paintings existing header lines and exposed pipe 250 mm to 350 mm dia C.I/M.S pipes with anti corrosion paint including rubbing and making base smooth followed by steel primer all complete

Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded inter lock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multipoint locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over back errod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above

12mmthickplaingrade-1, medium density flat pressed three layer particle boardFPT-Iorgraded wood particle board FPT-I,IS:3087marked,bondedwith BWP type synthetic resin adhesive as per IS

Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete 12mm thick