Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.1 Cr
EMD Value
₹10.1 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of CHC Building at TARAVA under National Health Mission in the Sonepur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/32
NBCC/ODISHA/ZO/NHM/NIT/22-23/32
Open Tender-Domestic
Civil Works General
Sonepur, Odisha
₹11,800
₹10.1 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
10 Mar 2023
1 0 Civil Works 0 0.00 0.00 0.00
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other civil
works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
including dewatering, removing slush, shoring and
strutting (as required), complete as per
specification and as directed by the Engineer-In-
Charge.
3 2 Hard soils. Cum 2539.85 235.53 5,98,205.79
Supplying and filling sand in foundation and over
areas including watering, ramming, consolidating
and dressing, labours, tools, taxes etc. all
complete as per the specification and direction of
Engineer-In-Charge.
Diluting and injecting chemical emulsion for PRE
CONSTRUCTIONAL Anti-termite treatment and
creating a continuous chemical barrier under and
all-round the column pits, wall trenches,
basement excavation, top perimeter of building,
expansion joints, over the top surface of
consolidated earth on which apron is to be laid,
surroundings of pipes and conduits etc. complete
as per specifications (plinth area of the building at
ground floor only shall be measured for payment).
Providing and laying plain cement concrete 1:4:8
(1 cement : 4 sand : 8 stone agregate 40mm
nominal size) as levelling course in floor and plinth
including tempering, curring, shuttering etc.
complete all depth and height.
First class Fly ash Brick masonry using bricks of
size 25 cm. x 12 cm. x 8 cm. having crushing
strength not less than 75 kg. Per. Sqr. Cm. in
cement mortar of mix( 1:6) with ordinary Portland
slag cement(PSC) and screened & washed sand
for mortar after immersing the bricks for 6 (Six)
hours in water before use in Foundation & Plinth
including splays cutting, circular moulding,
7 6 corbelling, chamfering and similar such type of Cum 38.31 5615.27 2,15,120.84
works, watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works
etc. complete in all respect as directed by the
Engineer-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12 cm. x
8 cm. having crushing strength not less than 75
kg. Per Sqr. Cm. in cement mortar of mix (1:6)
with approved grade cement and screened &
washed sand for mortar after immersing the
bricks for 6 (Six) hours in water before use in
Superstructure including splays cutting, circular
moulding, corbelling, chamfering and similar such 0 0.00 0.00 0.00
type of works, watering and curing etc. including
cost, conveyance, loading, unloading, royalties
and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works
etc. complete in all respect as directed by the
Engineer-in-charge
9 8 Ground floor Cum 530.76 5660.46 30,04,332.16
10 9 First floor Cum 531.46 5989.21 31,83,005.02
11 10 Terrace floor Cum 100.54 6367.28 6,40,166.33
Fly Ash. brick masonry of size 25 cm. x 12 cm. x
8 cm. having crushing strength not less than 75
kg. Per Sqr. Cm. in cement mortar of mix (1:4)
with approved grade cement and screened &
washed sand for mortar after immersing the
bricks for 6 (Six) hours in water before use in
Superstructure including splays cutting, circular
moulding, corbelling, chamfering and similar such 0 0.00 0.00 0.00
type of works, watering and curing etc. including
cost, conveyance, loading, unloading, royalties
and taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the works
etc. complete in all respect as directed by the
Engineer-in-charge
13 12 Ground floor Cum 30.90 5984.37 1,84,917.03
14 13 First floor Cum 36.24 6313.12 2,28,787.40
Providing, lifting, hoisting and laying Reinforced
cement concrete of M-25 grade as per approved
designs and drawings having a minimum
compressive strength (in work test) 250 Kg. /
Square cm. in 15 cm. cubes at 28 days after
mixing and test conducted in accordance with I.S.
516 using 12 mm. to 20 mm. size black hard
crushed broken granite stone chips and screened
and washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25 % )
to be mixed in concrete mixture with Portland
slag cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
vibrators, watering and curing for 28 days,
15 14 centering and shuttering then after dismantling 0 0.00 0.00 0.00
and removing debris from the work site and
finishing the exposed surface smooth providing
grooves or beads wherever necessary including
cost, conveyance, loading, unloading, royalties
and taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and binding
wires and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor steel tying
the grills and placing in proper position.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
16 15 Ground floor 0 0.00 0.00 0.00
17 16 a) Footing Cum 425.34 6870.31 29,22,219.36
18 17 b) Column up to plinth Cum 42.16 13868.42 5,84,692.67
19 18 d) Plinth Beam Cum 126.80 7296.77 9,25,229.93
20 19 e) Column above plinth Cum 90.91 13868.42 12,60,778.24
21 20 f) Lintel Cum 26.34 11135.66 2,93,313.28
22 21 g) Chajja Sqm 47.52 1008.31 47,914.89
23 22 h) Roof Beam Cum 86.66 13868.42 12,01,837.45
24 23 i) Slab Cum 251.57 11902.19 29,94,233.44
25 24 j) Stair case Cum 10.30 13273.11 1,36,713.05
26 25 First floor 0 0.00 0.00 0.00
27 26 f)Column Cum 90.91 15409.03 14,00,796.39
28 27 g) Lintel Cum 26.32 12129.57 3,19,250.39
29 28 h) Chajja Sqm 38.75 1129.85 43,781.69
30 29 i) Roof Beam Cum 99.18 15409.03 15,28,267.60
31 30 j) Slab Cum 227.36 13049.38 29,66,907.95
32 31 k) Stair case Cum 10.30 14694.54 1,51,353.76
33 32 Terrace floor 0 0.00 0.00 0.00
34 33 f)Column Cum 29.66 17252.43 5,11,750.09
35 34 g) Lintel Cum 0.23 13317.13 3,116.21
36 35 h) Chajja sqm 5.04 1275.23 6,427.14
37 36 i) Roof Beam Cum 6.13 17252.43 1,05,722.87
38 37 j) Slab Cum 13.40 14421.02 1,93,292.09
39 38 k) Stair case Cum 1.11 16395.04 18,198.49
Cutting, straightening coiled or bent up M.S. Rod
or tor steel of make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel and
binding wires of 18 to 20 gauge and labour
required for the work for bending, binding and 0 0.00 0.00 0.00
tying the grills in all floors (Linear measurement
will be taken and quantity will be calculated basing
on the standard weight of B.I.S. for M.S. Rods or
tor steel only. Wastage if any, including weight of
binding wire will not be considered for
measurement) etc. complete as per specification
& direction of Engineer-in-charge.
41 40 Ground floor Qntl 1222.60 10869.81 1,32,89,424.82
42 41 First floor Qntl 587.99 10899.07 64,08,544.17
43 42 Terrace floor Qntl 75.80 10929.87 8,28,538.37
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1 cement
44 43 : 6 fine sand) including necessary scaffolding, 0 0.00 0.00 0.00
curing etc. all complete at all floors and all
heights.
45 44 Ground floor Sqm 1354.79 176.76 2,39,478.10
46 45 First floor Sqm 1607.44 180.89 2,90,776.25
47 46 Terrace floor Sqm 114.20 185.02 21,129.74
16mm cement plaster to inside of brick surfaces
with cement mortar of mix 1:6 (1 cement : 6 fine
48 47 sand) including necessary scaffolding, curing etc. 0 0.00 0.00 0.00
all complete at all floors and all heights.
49 48 Ground floor Sqm 4931.43 251.34 12,39,465.62
50 49 First floor Sqm 4867.57 257.36 12,52,708.08
51 50 Terrace floor Sqm 136.72 263.61 36,041.56
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with cement
mortar of mix 1:4 (1 cement : 4 coarse sand)
including necessary scaffolding, curing etc. all
complete at all floors and all heights.
53 52 Ground floor Sqm 1864.39 198.24 3,69,596.67
54 53 First floor Sqm 1560.00 202.96 3,16,617.60
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
55 54 Terrace floor Sqm 91.63 207.92 19,050.93
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course
56 55 sand) and filling joints with slurry including cost 0 0.00 0.00 0.00
of all materials, labour T&P etc. required for the
work all complete incl. rubbing as per direction of
the Engineer-in-charge.
57 56 Ground floor Sqm 144.70 2978.56 4,30,997.05
58 57 First floor Sqm 45.10 2990.59 1,34,875.70
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes laid on
12 mm thick cement mortar (1:3) (1
59 58 cement : 3 course sand) and filling joints with 0 0.00 0.00 0.00
slurry including cost of all materials, labour T&P
etc. required for the work all complete incl.
rubbing as per direction of the Engineer-in-
charge.
60 59 Ground floor Sqm 19.37 1952.78 37,825.39
61 60 First floor Sqm 14.76 1970.95 29,091.28
Supplying, fitting & fixing of 25mm thick GRC
pavcer block in floors of approved make laid on 20
mm thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with slurry including
cost of all materials, labour T&P etc required for 0 0.00 0.00 0.00
the work all complete as per direction of the
Engineer-in-charge.
63 62 Ground Floor Sqm 350.78 2004.47 7,03,126.58
64 63 First floor Sqm 108.01 2016.50 2,17,802.38
Supplying, fitting & fixing of 10 mm thick & size
of 600x600 mm Glazed Vitrified floor tiles (GVT)
of matt finish(WOODEN FINISH/RUSTIC
FINISH) with veilcraft (VC ) shield( Scratch
free/stain free) with water absorption limit
between 0.08% to 3% and conforming to IS :
15622:2006 (Group B Ib). laid on 20 mm thick
cement mortar (1:4) (1 cement : 4 course sand)
and filling joints with white cement of approved
quality including cost of all materials, labour T&P
etc. required for the work all complete as per
direction of the Engineer-in-charge.
66 65 Ground floor Sqm 1437.84 1614.95 23,22,036.83
67 66 First floor Sqm 1094.43 1626.98 17,80,620.10
Supplying, fitting & fixing of Vertified tiles in
dadoes, skirting and risers of steps laid on 12
mm thick cement mortar (1:3) (1 cement : 3
course sand) jointed with slurry mixed with
pigment to match the shades of the tiles etc.
68 67 complete including cost of all materials, labour 0 0.00 0.00 0.00
T&P etc. required for the work all complete as per
direction of the Engineer-in-charge
69 68 Ground floor Sqm 1222.17 1749.82 21,38,579.95
70 69 First floor Sqm 1039.46 1767.99 18,37,759.04
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Providing & installation of Anti bacterial PVC
antistatic flooring ,Primo SD Vinyl Sheet flooring
manufactured by Tarkett with a nominal thickness
of 2 mm as per ISO 24340-EN 429 and width of
2m as per ISO 24341-EN 426 .Primo SD shall
confirm to requirement of ISO 10581-EN 649.
Primo SD shall have binder content of type I as
per ISO 10581, fire resistance of 8kw/m2 as per
ISO 9239-1 and class Bfl-S1 as per EN 15301-1,
indentation of less than 03 mm as per ISO 24343-
1 and EN 433, Slip resistance of R9 as per DIN
51130,greater than 0.3 as per EN 13893. The
static electrical discharge shall be less than 2kV
as per EN 1815 .The electrical resistance of the
product shall be less than 10^8 ohm as per EN
71 70 1081.The product does not contain Pthalate 0 0.00 0.00 0.00
based plasticizer and emission ratwe of VOC is
very low, measured after 28 days as per EN
16516.TVOC and formaldehyde emissions are
below 10microgram/m3.it is 100% reach
compliant.The product is fit to be used in class 34
in commercial and class 43 in industrial as per EN
72 71 First floor Sqm 23.60 2165.65 51,109.43
Providing and fixing of 12mm thick(N
White)shade in approve design,with properties
like bacteria resistance ,antifungal, heavy duty
scratch resistant & stain resistant,impact
resistant,insulative &non conductive,Green Guard
certified,Firerating as perstandardEN135-1-1b
surfaces pread off lame and having minimum
Specific Gravity1.65g/cm3 properties. Acrylic
solid surface sheets to be cut,pasted and finished
in approved shade,as per approved design by the
Engineer in charge. This solid surfaces should be
73 72 fixed over Plyboard supporting structure with all 0 0.00 0.00 0.00
mechanical fixtures as perspecification, drawings
and guideline.The quoted rates shall include
materia lcost with wastages ,fabrication &
installation of counter at site,cost of silicon &
approved adhesives, chamfering of edges,
flushing of joints and final finishing as per
directions o fEngineer-in-charge.(Plysupporting
structures is excluded in relevant items
74 73 First floor Sqm 284.87 18433.71 52,51,211.59
Supplying, fitting & fixing of Kota Tiles of minimum
16 mm thick Above 0.10 Sqm on 25mm thick
bed of cement mortar (1:1) (1 cement : 1 course
sand) jointed with neat cement slurry mixed with
pigments to match the shades of the tiles
including rubbing and polishing complete including
cost of all materials, labour T&P etc required for
the work all complete as per direction of the
Engineer-in-charge.
76 75 Ground floor Sqm 20.90 1339.30 27,991.37
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
77 76 First floor Sqm 42.63 1365.38 58,206.06
Supplying, fitting & fixing of 600cm x 300cm
Germ free Ceramic wall tiles of premium grade
having thickness 6.5mm to 6.7mm confirming to
IS 13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry mixed
with pigment to match the shades of the tiles etc.
complete including cost of all materials, labour
T&P etc. required for the work all complete as per
direction of the Engineer-in-charge
79 78 Ground floor Sqm 23.74 1115.45 26,480.88
80 79 First floor Sqm 200.00 1133.63 2,26,725.20
Providing and fixing seasoned sal wood work in
frames at any locations including doors,
windows,cupboard, clerestory and other frames
fixing in position including cost of hinges, M.S. flat
(30mm x 6mm) hold fasts lugs or dash fasteners
of required dia and length as per drawing /
specification, at all floors and all heights.
82 81 Ground floor Cum 1.83 63037.72 1,15,359.03
83 82 First floor Cum 1.59 63037.72 1,00,229.98
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour, iron
fittings, and wooden hinged cleats etc fitted and
fixed complete in all respect.
85 84 Ground floor Sqm 107.88 4264.40 4,60,043.69
86 85 First floor Sqm 93.84 4264.40 4,00,171.48
Providing and fixing fire resistant door frame of
section 35 x 60 mm on horizontal side & 50 x 60
mm on vertical sides having built in rebate made
out of 1.6 mm thick GI sheet (Zinc coating not
than 120gm/m²) suitable for mounting 120 min
Fire Rated Glazed Door Shutters. The frame shall
be filled with Mineral Wool Insulation having
density min 96Kg/m³. The frame will have a
provision of G.I.
Anchor fasteners of size M10 x 80 suitable for
fixing in the opening along with Factory made
Template for SS Ball Bearing Hinges of Size
100x89x3mm for
fixing of fire rated glazed shutter. The door shutter
87 86 would have a top rail and side rail 60 mm x 60 mm 0 0.00 0.00 0.00
and a bottom rail of 110 mm x 60 mm. The glass
should be Contraflam Door Lite, 11mm clear 120
min rated (EW 120 & EI 15) Non Wired
Toughened Interlayered glass with a light
transmission of 86% and a sound reduction of 38
dB and manufactured
in UL & TUV audited Facility and including UL-EU
Certification.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
The glass should be compliant to class 1B1
category of Impact Resistance as per EN 12600.
The glass should be held in its place with the help
of 1.6 mm GI beading and a special ceramic tape
cross section of 5 x 20 mm as per the test
evidence. The maximum glazing size should be
not more than 1124 mm x 2358 mm (w x h) or
3.19 sq mt in total
area or as per the relevant test certificate. Rate
includes Hardware as per Test report
89 88 Ground floor Sqm 4.80 48380.00 2,32,224.00
90 89 First floor Sqm 4.80 48380.00 2,32,224.00
91 90 Terrace floor Sqm 4.80 48380.00 2,32,224.00
Providing & fixing of side hung door of approved
make to be fabricated from roll formed sections
made of pre -painted steel (base steel as per IS-
513 of 0.60 mm thick "D" qualiyu, galvanised as
per IS-277 with zinc of 120 gm/sqm)with total
coated thickness of 0.55 mm slide guide section
should be made of o.5 mm stainless steel of 430
grade with paint specification being with primer of
5-7 microns thick & finished paint with polyster
paint(Black/Pearlwhite/Chocolate brown) of 12-16
microns along with the alkyd backer at the back of
5-7 microns & sections for external frame bottom
& top should be of 79x45 mm external frame
sides should be of 69x24 mm, guide for top &
bottom should be of 69x26 mm ( stainless steel).
92 91 section for shutter should be of 26x30 mm, sash 0 0.00 0.00 0.00
bar should be of 23x57 mm .Accessories/gaskets
are to be used as per the manufacturer's supply &
specifiction like gasket will be made of EPDM . All
corner brackets for internal & external are to be
made of glass filled nylon. The sections are to be
cut to length, joined & assembled by means of
corner bracket &frames are fixed to the concrete/
masonry walls by means of self expanding screws
&board to be of 50% 9mm pre-laminated board
and 50% 9mm glass with all taxes complete.
93 92 Ground floor Sqm 24.72 5718.87 1,41,370.47
94 93 First floor Sqm 24.72 5718.87 1,41,370.47
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2 track 2 panel
KOMMERLING uPVC white colour sliding window
comprising of uPVC multi-chambered frame
having section Frame 58mm x 49mm, Window
sash: 37mm x 61mm, made out of lead free green
profiles with corners fusion welded, fully
reinforced with Galvanized steel 1.5/2.0 mm. The
windows profile should fulfill the requirements of
Viny 2010. The physical properties of the profiles
like Vicat softening temperature, density, tensile
strength, hardness, weatherability, impact
strength and Modulus of Elasticity should be
tested in accordance with ASTM/DIN-ISO
standards and the thermal conductivity as per IS
95 94 standards. The window comprising of uPVC 0 0.00 0.00 0.00
extruded glazing beads of appropriate dimension,
EPDM gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel screws
etc. After fixing frame the gap between frame and
adjacent finished wall shall be filled with weather
proof silicon sealant over backer rod of required
size. The sash will be fitted with 5mm clear glass
( float ).complete in all respect as per specification
and direction of the Engineer in Charge. etc.
complete
96 95 Ground floor Sqm 111.60 9522.60 10,62,722.16
97 96 First floor Sqm 96.53 9522.60 9,19,216.58
98 97 Terrace floor Sqm 8.91 9522.60 84,846.37
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
materials,priming,and labour for fitting fixing
99 98 etc.complete as per the instruction of Engineer-in- 0 0.00 0.00 0.00
Charge
100 99 Ground floor Kg 2790.00 108.56 3,02,882.40
101 100 First floor Kg 2413.13 108.56 2,61,969.39
102 101 Terrace floor Kg 245.25 108.56 26,624.34
Priming one coat with wall cement primer (water
bound) to make an even finished surface in all
floors and heights to wall surface of approved
make and shade including sand papering,
applying putty wherever necessary & cost of
scaffolding, staging charges with cost,
conveyance, taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per the
direction of the Engineer-in-charge.
104 103 Ground floor Sqm 8150.61 74.10 6,03,992.80
105 104 First floor Sqm 8035.01 75.87 6,09,648.35
106 105 Terrace floor Sqm 342.55 77.76 26,637.37
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand papering,
107 106 polishing the surface, cost, conveyances of all 0 0.00 0.00 0.00
materials and cost of all labour,labour cess with
T&P etc, complete as per specification & direction
of Engineer-in-charge.
108 107 Ground floor Sqm 1354.79 90.86 1,23,096.22
109 108 First floor Sqm 1607.44 94.16 1,51,362.98
110 109 Terrace floor Sqm 114.20 97.59 11,144.32
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Finishing plastered surfaces of walls with cement
based wall putty (Water based) of approved make
and finishing the surface smooth and even by
sand papering to receive painting in walls, at all
heights with staging wherever necessary with
cost, conveyance, taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the
work complete in all respect as per the direction of
the Engineer-in-charge.
112 111 Ground floor Sqm 8150.61 80.95 6,59,775.58
113 112 First floor Sqm 8035.01 80.95 6,50,417.99
114 113 Terrace floor Sqm 342.55 80.95 27,728.74
Painting two coats with approved plastic emulsion
paint over a coat of wall primer of make to inside
surface of walls finished with Acrylic Wall putty
(water based) of make and finished smooth &
even surface to receive painting using roller to the
final coat including cost of scaffolding staging
charges with cost, conveyances, taxes of all
materials, cost of labour, T&P required for the
work etc. complete for all floors as per
specification & direction of the Engineer-in-
charge.
116 115 Ground floor Sqm 6795.82 98.53 6,69,592.14
117 116 First floor Sqm 6427.57 100.54 6,46,202.18
118 117 Terrace floor Sqm 228.35 102.54 23,415.47
Painting two coat with approved synthetic enamel
paint to new wood work over a coat of Red oxide
primer including cost, conveyances, royalties,
taxes of all materials and cost of all labour with
119 118 T&P required for the work etc. complete as per 0 0.00 0.00 0.00
specification & direction of Engineer in charge.
120 119 Ground floor Sqm 69.65 240.96 16,782.59
121 120 First floor Sqm 60.69 246.97 14,988.85
Painting two coats to new Iron work with approved
enamel paints of approved colour, shade
including sand papering, polishing the surface,
cost, conveyances, taxes of all materials and cost
122 121 of all labour,labour cess with T&P etc, complete 0 0.00 0.00 0.00
as per specification & direction of Engineer-in-
charge.
123 122 Ground floor Sqm 122.76 168.98 20,743.49
124 123 First floor Sqm 106.18 173.22 18,392.92
125 124 Terrace floor Sqm 17.72 177.59 3,146.89
Supplying, fitting and fixing of Stainless steel of
304 grade in hand ralling using 50mm dia of 2mm
thick circular pipe with Balustrade of size 32mm X
32mm X 2mm @ 0.90mtr. C/C and stainless
square pipe bracing of size 32mm X 32mm X
126 125 2mm in 3 rows in stair case as per approved 0 0.00 0.00 0.00
design and specification, buffing, polishing etc
with cost, conveyance, taxes, all materials, labour,
T&P etc. required for the complete in all respect.
127 126 Ground floor Kg 276.41 342.55 94,685.35
128 127 First floor Kg 276.41 342.55 94,685.35
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Providing, and applying two coat of primer 7E in
both surface of expansion joint followed by
applying polysulphide sealant Thioflex 600 on
vertical joint surface after proper fixing of the
necessary backup materials as specified
129 128 including cost ,conveyance ,taxes of all materials 0 0.00 0.00 0.00
,Labour, transportation charges etc. complete as
per specification and direction of the Engineer-in-
charge.
130 129 Ground floor Rmt 29.18 1442.96 42,105.66
131 130 First floor Rmt 29.18 1442.96 42,105.66
Providing 2.5cm thick Grading Concrete over roof
slab with cement concrete (1:2:2) using 6.7mm
size black hard granite crusher broken chips and
screened & washed sharp sand for mortar and
finished smooth to the rough surface of slab
including watering and curing with cost,
conveyance, royalties and taxes of all materials
with cost of all labour, labour cess and T&P
required for the work etc. complete in all respect
as directed by the Engineer in charge.
133 132 Terrace floor Sqm 1783.45 452.53 8,07,064.63
Providing & Fixing horizontal level suspended
ceiling comprising of Armstrong Aluminium
Bioguard Clip-in Micro Perforated 600x600mm
(Nominal Size) tiles made of AA-3003-H14
(Tempered) grade Aluminium suitable for
architectural finishes in 0.7mm thickness as per
in IS:2676 (1981) in Global white color with
concealed suspension system having a bevelled
edge of 3x3mm and height of 33mm on one side
and 18mm on the other side. Tile shall have
perforation of diameter (hole) as 1.5mm and open
area as 18% with linear and diagonal pitch of
4.3mm and 3mm respectively along with a border
of 11mm. The difference between the 2 diagonal
dimensions of the tile to be less than 1mm. Tiles
134 133 shall be flattened by precision leveller to minimize 0 0.00 0.00 0.00
sag to less than 1/400mm. The tiles shall have
double round pip of ɸ 2mm and ɸ 6mm for secure
engagement and levelling respectively, along with
swing down feature and special tabs to allow
removal of tile to enable plenum access. The
coated surface of the tile shall exhibit anti-
microbial properties (eradication and inhibition of
growth) and shall achieve up to 99.99% reduction
in bacterial activity as per ISO22196:2011. The
tile shall be electrostatically polyester powder
coated using RoHS compliant powder having
coating thickness ranging from 60-80 microns.
The powder coating shall pass Salt Spray Test for
750 Hours as per ASTM B117, QUV –A Test for
1000hours as per ASTM G-154 – (Cycle – 1) and
Humidity test for 1000hours as per DIN 50017.
135 134 Ground floor Sqm 101.53 2547.03 2,58,599.96
136 135 First floor Sqm 229.05 2547.03 5,83,397.22
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Providing and fixing false ceiling at all heights with
integral densified calcium silicate reinforced with
fibre and natural filler false ceiling tiles of Size
595x595mm of approved texture, design and
patterns as per CPWD Specifications 2019, to be
laid in true horizontal level suspended on inter-
locking metal T-Grid of hot dipped galvanised iron
section of 0.33mm thick (galvanized @ 120
grams per sqm including both sides) comprising
of main-T runners of size 24x38 mm of length
3000 mm, cross - T of size 24x32 mm of length
1200 mm and secondary intermediate cross-T of
size 24x32 mm of length 600mm to form grid
module of size 600 x 600 mm, suspended from
ceiling using galvanised mild steel items
137 136 (galvanizing @ 80 grams per sqm) i.e. 12x50 mm 0 0.00 0.00 0.00
long dash fasteners, 6 mm dia fully threaded
hanger rod upto 1000 mm length and L-shape
level adjuster of size 76x25x25x1.6 mm fixed with
grid and Z cleat of size 25x37x25x1.6mm thick
with precut hole on both 25mm flange to pierce
into 12x50mm or even bigger size dash fastener if
require, fixed with Galvanised iron perimeter wall
angle of size 24x24x0.40 mm of length 3000 mm
to be fixed on periphery wall / partition with the
help of plastic rawl plugs at 450 mm center to
center and 40 mm long dry wall S.S screws. The
work shall be carried out as per specifications,
drawing and as per directions of the Engineer-in-
Charge. With 15 mm thick tegular/butt edged
without perforation plain/designer light weight
calcium silicate Anti-Microbial Bio-Safe coated
138 137 Ground floor Sqm 1366.03 1637.84 22,37,338.58
139 138 First floor Sqm 650.05 1637.84 10,64,677.89
140 139 Sub-Total of Civil Works 0 0.00 0.00 8,22,47,761.56
141 1 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and cutting
holes through existing brick work including
making good the damages in cement mortar
142 2 ( 1:4) for taking GI pipes and fittings/ PVC pipes 0 0.00 0.00 0.00
and fittings etc all complete as per PH
specification and direction of the Engineer in
charge.
143 3 In Ground Floor Each 60.00 56.05 3,363.00
144 4 In 1st Floor Each 50.00 56.99 2,849.70
Supplying all materials, labour, T&P and cutting
hole in R.C.C floors, roofs, etc upto 19 cm thick
for passing G.I. Pipes / P.V.C pipes and fittings
etc and repairing the holes after insertion of pipes
etc with cement concrete (1:2:4 ) including
finishing complete so as to make it leak proof as
per direction of the Engineer in charge.
146 6 In Ground Floor Each 30.00 192.22 5,766.66
147 7 In 1st Floor Each 25.00 193.05 4,826.20
Supplying all materials, labour, T&P and cutting
grooves in pucca floors and walls for taking
148 8 GI/PVC pipes and making good the damages as 0 0.00 0.00 0.00
per the direction of the Engineer in charge
149 9 In Ground Floor Mtr 200.00 212.40 42,480.00
150 10 In 1st Floor Mtr 200.00 218.30 43,660.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and cutting
holes through existing brick or laterite masonry
wall for taking HCI pipes and fittings including
151 11 making good the damages etc all complete as 0 0.00 0.00 0.00
per PH specification and direction of the Engineer
in charge
152 12 250mm to 375mm thick wall 0 0.00 0.00 0.00
153 13 In Ground Floor Each 80.00 216.06 17,284.64
154 14 In 1st Floor Each 60.00 216.06 12,963.48
Supplying all materials, labour, T&P and fixing
water closet, squatting pan (Indian type W.C pan
/ Orissa pattern squatting pan) duly embedded in
155 15 cement concrete (1:5:10) using 4cm size hard 0 0.00 0.00 0.00
granite metal all complete as per specification and
direction of the Engineer in charge
156 16 Fixing 580mmx440mm size Orissa pan Each 35.00 2975.96 1,04,158.60
Supplying all materials, labour, T&P and
constructing gully trap chamber of the following
inside size with 8cm thick R.C.C precast cover
slab in cement concrete (1:2:4) mix using 12mm
size h.g chips, foundation concrete (1:4:8) using
40mm size hard granite metal on bed and around
trap, Fly ash brickwork in c.m (1:6) in F&P and
157 17 inside 12mm thick cement plastering (1:3) 0 0.00 0.00 0.00
finished with a floating coat of neat cement
including fixing 100mmx100mm size HCI gully
trap,150mmx150mm size C.I grating etc all
complete as per approved drawing, specification
and direction of the Engineer in charge
Gully trap chamber of size 250mmx250mm with
R.C.C cover slab
Supplying all materials, labour, T&P and
constructing inspection chamber of the following
size with cement concrete(1:3:6) using 40mm
size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar(1:6),moulding and
shaping the channel inside and benching with
cement concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to
159 19 outside, R.C.C cover slab in (1:2:4) using 12mm 0 0.00 0.00 0.00
size h.g chips with RCC man hole cover,
earthwork in excavation in all kinds of soil and
refilling the cavity around the chamber including
watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per approved specification and
direction of the Engineer in charge
Inspection chamber Inside size
760mmx760mmx460mm
Supplying all materials, labour, T&P and filling in
foundation and plinth with sand well watered and
rammed including conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per direction of the Engineer in
charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing
cement concrete (1:4:8) with 4cm size hard
granite metal including watering, curing,
162 22 conveyance of all materials to worksite, payment Cum 10.27 5348.82 54,916.36
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
charge
Supplying all materials, labour, T&P and providing
cement concrete (1:2:4) with 12mm size hard
broken granite chips including watering, curing,
163 23 conveyance of all materials to worksite, payment 0 0.00 0.00 0.00
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
charge
164 24 In Ground Floor Cum 10.27 7741.63 79,483.27
165 25 In 1st Floor Cum 7.84 8115.69 63,602.63
Supplying all materials, labour, T&P and providing
and fixing ceramic tiles in floors, treads or steps
and landing on 25mm thick bed of cement mortar
(1:1) ( 1 cement : 1 sand ) jointed with neat
cement slurry mixed with pigment to match the
shades of the tiles including watering,
curing,cost of all materials, conveyance of all
materials to work site , payment of royalty, all 0 0.00 0.00 0.00
taxes etc all complete as per P.W.D specification
and direction of Engineer-in-charge ( ceramic floor
tiles of premium grade having thickness 7mm to
8mm conforming to IS 13755 of size
Kajaria/Somany/Johnson tile 60cmx60cm special
printed series to be pre-approved by the Engineer-
in-charge )
167 27 tile 60cmx60cm 0 0.00 0.00 0.00
168 28 Ground Floor Sqm 102.67 1463.20 1,50,226.74
169 29 First Floor Sqm 78.37 1475.35 1,15,623.49
Supplying all materials,labour,T&P and providing
12mm thick cement plaster(1:4) on brick work
including watering,curing,cost of all materials,
170 30 conveyance of all materials to worksite,payment 0 0.00 0.00 0.00
of royalty,all taxes etc.all complete as per PWD
specification and direction of the Engineer-in-
charge.
171 31 Ground Floor Sqm 384.85 192.81 74,203.70
172 32 First Floor Sqm 235.50 197.06 46,407.63
Supplying all materials, labour, T&P and providing
and fixing porcelain glazed tiles in dado skirting
on 12mm thick cement plaster (1:3) jointed with
neat cement slurry mixed with pigment to match
the shades of the tiles including watering,
curing,cost of all materials, conveyance of all
materials to work site , payment of royalty, all
173 33 taxes etc all complete as per P.W.D specification 0 0.00 0.00 0.00
and direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness 6.5mm to
6.7mm conforming to IS 13753 of size tile
60cmx30cm special plain / printed series to be
pre-approved by the Engineer-in-charge )
tile 60cmx30cm
175 35 Ground Floor Sqm 384.85 1350.63 5,19,789.19
176 36 First Floor Sqm 235.50 1368.92 3,22,380.19
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying the waterproofing material Pidifin 2K of
Dr.fixit on equivalent water proofing material and
appling in two coat over the concrete floor and
177 37 dado upto 1"-6" in wall including cleaning,applying 0 0.00 0.00 0.00
and mending as per specification including all
labour charges as per direction of Engineer-in-
charge.
178 38 In Ground , First floor Sqm 181.04 316.24 57,252.09
Supplying all materials, labour, T&P and filling in
sunken floor in toilets with cinter (light weight
slag) well watered and rammed include
179 39 conveyance of all materials to worksite payment of Cum 18.10 655.79 11,869.71
royalty, taxes etc all complete as per specification
and direction of the Engineer in charge
Factory made single leaf Solid WPC (Wood
polymer) composite door shutter of 25mm
thickcompacted with wood grain finish structural
foam panel of 29mm thickness and a density of
20kg/cu.mtr shall be used as core material for
fitting the metal fittings such as tower bolts,
aldrops, handles etc shall be provided. A
structural adhesive compatible with (EPS) foam
shall be used for bending the core material, The
material and process for manufacturing the door
180 40 shutters shall conform to RV-TIFAC composites sqm 92.27 4048.11 3,73,518.93
Design Centre's standards and specifications and
the door shutters Conforming to relevant
I.S.specification. The finish of door shutter will be
plain colour white/ Ivory/ Beige/ Light grey/
Mahogany/ Teak wood or any other colour using
high quality pigments. Three heavy whight mild
steel butt hinges type-I(ISI marked) size 100mm
are to be fitted on one side of shutter.
Factory made Solid WPC door frame of size
95mmx55mm fabricated .The door frame consist
of four segments which are provided with plug-in-
socket arrangement in-situ in the mould. The
segments are plugged in and are joined together
by means of screw. The WPC frame shall be
provided with The material and process for
manufacturing the door frames shall conform to Rmt 286.14 1314.87 3,76,238.05
Relavent I.S.specification. The finish of door
frame will be plain colour white/ Ivory/ Beige/ Light
grey/ Golden brown/Mahogany/ Teak wood/sand
stone/Champagne/Pastel blue or any other colour
using high quality pigments complete in all
respect as per specification and direction of the
Engineer in charge
Construction of 6.75mx3.60m x 1.40m(h) Rain
water Recharge Pit
Earth work in all kinds of soil within 50 mtr initial
lead and 1.5mtr initial lift including rough dressing
and breaking clods to maximum 5cm to 7cm and
laying in layers not exceeding 0.3 mtr in depth and
as per direction of the Engineer in charge.
Supplying all materials, labour, T&P and providing
cement concrete (1:4:8) with 4cm size hard
granite metal including watering, curing,
184 44 conveyance of all materials to worksite, payment Cum 2.16 5348.82 11,577.53
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing
brick work with Fly ash bricks having crushing
strength not less than 75kg/cm² with dimensional
tolerance ± 8 percent in cement mortar (1:6)
185 45 including watering, curing, conveyance of all Cum 11.40 5027.15 57,309.56
materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and providing
12mm thick cement plaster (1:4) on brickwork
including watering, curing, conveyance of all
186 46 materials to worksite, payment of royalty, taxes Sqm 91.20 192.81 17,584.45
etc all complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and providing
cement punning including watering, curing,
conveyance of all materials to worksite, payment
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
charge
Supplying all materials, labour, T&P and providing
rigid and smooth centering and shuttering for
R.C.C works including false work and dismantling
them after casting including conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
189 49 Roof slab Sqm 3.13 521.44 1,632.11
Earth work in excavation of foundation in all kinds
of soil within 50 mtr initial lead and 1.5mtr initial lift
including rough dressing and breaking clods to
190 50 maximum 5cm to 7cm and laying in layers not Cum 0.25 254.75 63.69
exceeding 0.3 mtr in depth and as per direction of
the Engineer in charge.
Supplying all materials, labour, T&P and providing
M.S reinforcement for R.C.C work including
cutting, bending, binding, and tying the grills and
placing in position including cost of binding wire
191 51 18 to 20 gauge, conveyance of all materials to Qntl. 0.25 10988.16 2,747.04
worksite, payment of royalty, taxes etc all
complete as per specification and direction of the
Engineer in charge
192 52 Providing and filling filter media 0 0.00 0.00 0.00
193 53 40mm size bolder Cum 25.50 1669.11 42,562.31
194 54 20mm size washed gravel Cum 6.00 2033.73 12,202.38
195 55 Course sand Cum 9.00 687.35 6,186.15
Providing fitting and fixing M.S.grill,Jalli cover over
the harvesty pindi
Supplying all materials, labour, T&P and
constructing surface drain of size A-4 type with
cement concrete (1:3:6) using 12mm size h.g
chips on bed, 1st class Fly ash brickwork in
cement mortar (1:3) inside, 12mm thick cement
197 57 plaster (1:3) finished smooth with cement punning mtr 80.00 969.72 77,577.92
including watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and laying in
trenches (to level or slope) unplasticized PVC
pipes conforming to IS: 4985/2000 of the following
outside dia for class–3(0.60mpa) including jointing
with supply of approved solvent cement by non-
heat application method/as per manufacturer’s
specification, providing and laying in trench 0 0.00 0.00 0.00
cement concrete (1:4:8) with 40mm size hard
granite metal in the Type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per PH
specification and direction of the Engineer in
charge.
199 59 110mm dia u-pvc pipe alround concrete mtr 110.00 1268.62 1,39,547.98
200 60 160mm dia u-pvc pipe alround concrete mtr 90.00 2052.96 1,84,766.76
Supplying all materials, labour, T&P and
constructing man hole chamber of the following
size with cement concrete(1:3:6) using 40mm
size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar(1:6), moulding and
shaping the channel inside and benching with
cement concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to
201 61 outside, R.C.C cover slab in (1:2:4) using 12mm 0 0.00 0.00 0.00
size h.g chips with RCC man hole cover,
earthwork in excavation in all kinds of soil and
refilling the cavity around the chamber including
watering, curing, conveyance of all materials to
worksite, payment of royalty, taxes etc all
complete as per approved specification and
direction of the Engineer in charge
Man hole chamber Inside size
910mmx910mmx910mm
203 63 Cost of R.C.P.C.Cover. Each 15.00 1289.86 19,347.87
Supplying all materials, labour, T&P and
constructing soakway pit of the following size with
dry brick walling from bottom upto invert of inlet
pipe and 1st class Fly ash brickwork in cement
mortar (1:6) for the remaining height at top,
cement concrete (1:4:8) using 40mm size hg
chips on bed, 12mm thick cement plaster (1:4)
inside and outside over masonry brickwork, gravel
backing in the rear of well steining, RCC cover
204 64 slab in cement concrete (1:2:4) using 12mm size 0 0.00 0.00 0.00
hg chips fitted with iron lifting handles including
earthwork in open well excavation in all kinds of
soil and refilling of cavity around the pit & painting
the iron works, watering, curing, conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per approved specification and
direction of the Engineer in charge
Brick masonry soakway pit 1.40m dia x 2.00m
Construction of RCC Over head Tank of Inside
206 66 size- 4.40 X 3.70 X1.50m-(20 KLD) 2nd floor 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing
cement concrete (1:1½:3)with 12mm size hard
broken granite chips for R.C.C works including
hoisting, laying, watering, curing, conveyance of
all materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and providing
M.S.Reinforcement for RCC work including
cutting, banding, binding, straightening and trying
the grills and placing in position including cost of
binding wire 18 to 20 gage.
Supplying all materials, labour, T&P and providing
rigid and smooth centering and shuttering for
209 69 RCC work including false work and dismantling sqm 44.51 1017.51 45,289.55
then after casting including cost of materials
complete in ground floor.
210 70 RCC Beam, Column, wall etc sqm 71.73 1960.81 1,40,648.61
Supplying all materials, labour,T&P and providing
6mm thick cement plasster (1:4) over CC work
including watering curring and conveyance of all
materials to site.
Supplying all materials, labour, T&P and providing
cement punning including watering, curring and
conveyance of all materials to site.
213 73 Quantity same as item No-4 sqm 42.24 46.02 1,943.88
Supplying and fitting and fixing stainless steel 34
grade in said rail using 5mm dia 2mm thick
circular pipe and lalustrade 32mmx32mmx2mm at
the rate of mtr.Center to center and square pipe
214 74 32x32x2mm below including welding with stanless Kg 50.00 395.30 19,765.00
steel elect rod and fixing with necessary
accessories etc.complete as per direction of the
Engineer-in-charge.
Providing fitting and fixing MS cover made out of
MS angle and sheet duly welding and fixing with
frame and hinges along with locking arrangement
of size 60cmx60cm etc complete as per direction
of Engineer-in-charge
216 76 1 no 50,000ltr R.C.C. Sump 0 0.00 0.00 0.00
Earth work in excavation of foundation in all kinds
of soil with in 1.5m initial lift including dressing
and leveling of bed and breaking the clods and the
excavated materials with in 50m initial lead as per
direction of Engineer in charge.
-do- with Ist additional depth of 1.50 m over the
initial lead and lift
Supplying all materials, labour, T&P and filling in
foundation and plinth with sand well watered and
rammed including conveyance of all materials to
worksite, payment of royalty, taxes etc.all
complete as per direction of the Engineer in
charge.
Supplying all materials, labour, T&P and providing
cement concrete (1:3:6) with 4cm size hard
granite metal including watering, curing,
220 80 conveyance of all materials to worksite, payment Cum 7.45 5900.35 43,957.64
of royalty, taxes etc all complete as per
specification and direction of the Engineer in
charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing
cement concrete (1:1½:3)with 12mm size hard
broken granite chips for R.C.C works including
hoisting, laying, watering, curing, conveyance of
all materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and providing
M.S.Reinforcement for RCC work including
cutting, banding, binding, straightening and trying
the grills and placing in position including cost of
binding wire 18 to 20 gage.
Supplying all materials, labour, T&P and providing
rigid and smooth centering and shuttering for
223 83 RCC work including false work and dismantling 0 0.00 0.00 0.00
then after casting including cost of materials
complete in ground floor.
224 84 RCC floor roof, chajja etc sqm 29.10 521.44 15,173.96
225 85 RCC Beam, Column, wall etc sqm 117.48 897.63 1,05,453.10
226 86 RCC Plinth bend/ Raft sqm 20.32 317.77 6,457.17
Supplying all materials,labour,T&P and providing
12mm thick cement plaster(1:3) on brick work
including watering,curing,cost of all materials,
227 87 conveyance of all materials to worksite,payment sqm 86.80 209.57 18,190.50
of royalty,all taxes etc.all complete as per PWD
specification and direction of the Engineer-in-
charge.
Supplying all materials, labour, T&P and providing
cement punning including watering, curring and
conveyance of all materials to site.
229 89 Quantity same as item No-4 sqm 86.80 41.18 3,574.60
Supplying and fitting and fixing stainless steel 34
grade in said rail using 5mm dia 2mm thick
circular pipe and balustrade 32mmx32mmx2mm
at the rate of mtr.Center to center and square
230 90 pipe 32x32x2mm below including welding with Kg 80.00 381.97 30,557.28
stanless steel elect rod and fixing with necessary
accessories etc.complete as per direction of the
Engineer-in-charge.
Providing fitting and fixing RCPC cover etc
231 91 complete as per direction of Engineer-in-charge each 2.00 1289.86 2,579.72
232 92 Construction 2 no 100 users RCC Septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all kinds
of soil within 50m initial lead and 1.5m initial lift
including rough dressing & breaking clods to
233 93 maximum 5cm to 7cm and laying in layers not cum 118.80 254.75 30,264.32
exceeding 0.3m in depth and as per direction of
the Engineer-in-Charge.
-do- with Ist disintegrated rockadditional depth of
1.50 m over the initial lead and lift
Supplying all materials,labour ,T&P and filling in
foundation and plinth with sand well watered and
rammed including cost, conveyance of all
materials to work site ,payment of royalty,taxes
etc. all complete as per direction of the Engineer-
in -charge
236 96 In ground floor cum 11.88 330.99 3,932.16
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing cement concrete ( 1:4:8 ) with 4cm size
crusher broken hard granite metal including
watering, curing, cost of all materials,conveyance
of all materials to work site with payment of
royalty, all taxes etc all complete as per P.W.D
specification and direction of Engineer-in-charge.
238 98 In ground floor cum 11.88 5348.82 63,544.01
Supplying all materials, labour, T&P and providing
cement concrete ( 1:2:4 ) with 12mm size crusher
broken hard black granite chips including
watering, curing,cost of all materials, conveyance
239 99 of all materials to work site with payment of 0 0.00 0.00 0.00
royalty, all taxes etc all complete as per P.W.D
specification and direction of Engineer-in-charge
240 100 In ground floor cum 6.94 7741.63 53,726.88
Supplying all materials, labour, T&P and providing
cement concrete (1:1:5:3) with 12mm size hard
broken granite chips for R.C.C works including
hoisting, laying, watering, curing, conveyance of
all materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
Supplying all materials, labour, T&P and providing
rigid and smooth centering and shuttering for
R.C.C works including false work and dismantling
them after casting including conveyance of all
materials to worksite, payment of royalty, taxes
etc all complete as per specification and direction
of the Engineer in charge
243 103 For Roof slab sqm 74.30 521.44 38,743.14
244 104 For RCC wall sqm 256.80 897.63 2,30,510.36
Supplying all materials, labour, T&P and providing
M.S reinforcement for R.C.C work including
cutting, bending, binding, and tying the grills and
placing in position including cost of binding wire
245 105 18 to 20 gauge, conveyance of all materials to 0 0.00 0.00 0.00
worksite, payment of royalty, taxes etc all
complete as per specification and direction of the
Engineer in charge
246 106 In ground floor Qntl 44.60 10988.16 4,90,071.94
Supplying all materials,labour,T&P and providing
6mm CP (1:4) with cement punning on brick work
including watering,curing,cost of all materials,
247 107 conveyance of all materials to worksite,payment sqm 167.64 196.94 33,015.36
of royalty,all taxes etc.all complete as per PWD
specification and direction of the Engineer-in-
charge.
Supplying all materials, labour, T&P and
providing,fitting and fixing 100mm x 100mm x
100mm SW Tee in wall including filling the recess
with cement concrete (1:3:6) with 12mm size h.g
248 108 chips all complete including watering, curing, Each 4.00 440.61 1,762.45
conveyance of all materials to worksite, payment
of royalty all complete as per specification and
direction of the Engineer in charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and making
MS step iron in 20mm diameter MS steel bars
and fixing into walls of man hole/septic tank duly
249 109 embedded in cement concrete (1:3:6) complete Each 20.00 318.13 6,362.56
as per specification and direction of the Engineer
in charge.
Filling in foundation and plinth with excavated
materials, moorum including watering and
ramming as directed by the Engineer in charge
Supplying all materials, labour, T&P and providing
and fixing to wall or ceiling and floor C-PVC pipes
conforming to pipe fittings of the following
nominal bore with clamps including making good
the wall, ceiling and floor all complete as per
specification and direction of the Engineer in
charge
252 112 In Ground Floor-20mm dia C-PVC pipe Mtr 120.00 288.63 34,635.36
253 113 In 1st Floor-20mm dia C-PVC pipe ( Mtr 80.00 298.42 23,873.76
254 114 25mm dia C-PVC pipe Mtr 120.00 392.82 47,138.64
255 115 In 1st Floor-25mm dia C-PVC pipe Mtr 80.00 284.62 22,769.28
Supplying all materials, labour,T&Pand providing
and fixing to wall or ceiling and floor pvc pipes
conforming to ASTM-D-1785/04 (Sch-80) and
pipe fittings of the following nominal bore with
clamps including making good the wall, ceiling
and floor all complete as per specification and
direction of the Engineer in charge
257 117 In Ground Floor-32mm dia PVC ASTM Pipe Mtr 160.00 291.70 46,671.36
258 118 In 1st Floor- 32mm dia PVC ASTM Pipe Mtr 110.00 301.02 33,111.98
259 119 40mm dia PVC ASTM Pipe Mtr 150.00 383.50 57,525.00
260 120 In 1st Floor- 40mm dia PVC ASTM Pipe Mtr 120.00 395.30 47,436.00
Supplying all materials, labour, T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all jointing materials
complete as per specification and direction of the
Engineer in charge
15 mm dia CP L.B. Bib cock(CON-CHR-107KN)
15mm dia CP angle stop cock (Con-CHR-053KN
20mm dia CP Con. stop cock (CON-CHR-
15mm dia CP two in one bib cock (Con-CHR-
15mm dia CP Health faucet (Con-ALD-MCH-573
267 127 15mm dia CP extension piece Each 240.00 69.97 16,793.76
268 128 Pillar cockFLR-CHR-5031N Each 59.00 2526.26 1,49,049.46
269 129 125mm dia C.P.gratings. Each 111.00 99.24 11,015.42
15mm C.P.revolving shower with 15mm x 225mm
long CP shower arm.
271 131 15mm CP spereader Each 2.00 397.19 794.38
272 132 25mm dia brass Fullway valve Each 20.00 1095.28 21,905.52
273 133 32mm dia brass Fullway valve Each 20.00 1603.50 32,070.04
274 134 40mm dia brass Fullway valve Each 20.00 2035.85 40,717.08
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fitting
and fixing 10 litres capacity low level flushing
cistern with a pair of cast iron or M.S brackets
complete with fittings such as siphonic
arrangements 15mm nominal size brass/pvc ball
valve with polythene float CP brass handle, unions
and couplings for connection with inlet, outlet and
overflow pipes,32mm dia CP flush bend,15mm 0 0.00 0.00 0.00
dia pvc inlet connection pipe including cutting
holes and making good the same and connecting
the flush bend with cistern and closet and
connecting the inlet pipe with supply main etc all
complete as per specification and direction of the
Engineer in charge
276 136 10 litres PVC L.L. Cistern (Slimline-white) Each 50.00 1853.07 92,653.60
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside diameter
conforming to ISI No. 13592/1992 to walls with
nails, bobbins and wooden plugs or laying in
trenches including jointing with supply of
approved rubber lubricant by non-heat application
method/as per manufacturer’s specification,
testing, earthwork in excavation in all kinds of soil
and refilling of trenches as per specification and
direction of the engineer in charge
278 138 100mm dia U-PVC SWR pipes Mtr 350.00 541.38 1,89,484.40
279 139 75mm dia U-PVC SWR pipes Mtr 125.00 358.84 44,854.75
280 140 100mm dia U-PVC 'P' trap Each 60.00 586.81 35,208.84
281 141 100mm dia U-PVC Door Tee Each 65.00 346.45 22,519.12
282 142 100mm dia U-PVC Plain Bend Each 55.00 273.76 15,056.80
283 143 100mm U-PVC Door Cross Tee Each 45.00 650.42 29,268.72
284 144 75mm dia U-PVC Door Bend. Each 65.00 265.50 17,257.50
285 145 75mm dia U-PVC Plain Bend. Each 30.00 217.12 6,513.60
286 146 75mm dia Nahin trap Each 50.00 204.49 10,224.70
287 147 75mm dia Multi Floor Trap Each 35.00 348.45 12,195.89
288 148 110x75mm dia Reducer Each 12.00 157.88 1,894.61
289 149 110mm dia Vent cowl. Each 16.00 68.68 1,098.82
290 150 W/C connector Each 31.00 606.05 18,787.49
PVC Clamp suitable for 75mm to 110mm dia pipe
Supplying all materials, labour, T&P and fixing
Wash Down Water Closet (European type W.C
pan) with integral ‘S’ or ‘P’ trap to the floor with
wooden plug and chromium plated screws
including jointing the trap with soil pipe in cement
mortar (1:1) etc all complete as per specification
and direction of the Engineer in charge.
E.W.C. with seat cover
(Parryware/Hindware/Neycer/Rak)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
wash basins with hole for pillar taps conforming to
IS:2556-part-4-2004 with cast iron or M S
brackets painted white including cutting holes in
walls and making good the damages with supply
of wooden plugs, screws and cement etc, fixing
pedestal for wash basin recessed at the back for
the reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for wash
basin including brass check nut complete, fixing
294 154 pillar taps capstan head screw down high 0 0.00 0.00 0.00
pressure lettered ‘Hot’ and ‘Cold’ with long
screws, shanks and back nuts of 15mm dia
nominal bore, fixing 15mm dia PVC inlet
connection pipe and making connection with pillar
cocks and supply mains for wash basin, fixing
32mm dia CP brass waste, etc all complete as
per specification and direction of the Engineer in
charge
550mm x 400mm size W. H. Basin with Half
Pedestal
Supplying all materials, labour, T&P and fixing
mirror of superior glass conforming to IS:3438-
1996 mounted on 6mm thick A.C sheet or
296 156 plywood sheet and fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws and washers complete as per
specification an direction of the Engineer in
charge
Fixing 600mmx450mm size B.E mirror (fixed type)
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rails complete fixed to wooden
plugs with CP screws as per specification and
direction of the Engineer in charge
600 x 125mm plate glass shelf with CP guard
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
300 160 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
301 161 25mm x 600mm long CP towel rail Each 21.00 827.65 17,380.69
302 162 CP towel rail Ring. Each 58.00 552.95 32,070.98
Supplying all materials, labour, T&P and fixing CP
soap holder complete with CP brass brackets
303 163 fixed to wooden plugs with CP screws as per 0 0.00 0.00 0.00
specification and direction of the Engineer in
charge
304 164 CP soap holder Each 130.00 212.05 27,565.98
Supplying all materials, labour, T&P and fixing
wash kitchen sink/laboratory sink with cast iron
or M S brackets painted white including cutting
305 165 holes in walls and making good the damages etc 0 0.00 0.00 0.00
all complete as per specification and direction of
the Engineer in charge
306 166 600x450x250 mm Porceloain sink Each 1.00 5843.48 5,843.48
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing
fitting and fixing Pure Chill 120 PSS UV of size
750x570x1350mm height with water storage
capacity 120 liters along with 3 nos of faucets 2
307 167 for cold water and 1 for normal water including a 0 0.00 0.00 0.00
flow of 1.5 ltr per minute etc all complete as per
approved drawing,specification and direction of
the Engineer in charge.
308 168 Pure Chill 120 PSS UV Each 2.00 154893.88 3,09,787.76
309 169 Tube Well 0 0.00 0.00 0.00
310 170 Sinking of tube well through D.T.H.Rig. 0 0.00 0.00 0.00
311 171 200mm dia- 0.0m to 30.00m Mtr. 50.00 923.47 46,173.40
312 172 Lowering of PVC casing pipe inside bore. 0 0.00 0.00 0.00
313 173 200mm dia- 0.0m to 30.00m Mtr. 50.00 212.99 10,649.50
314 174 Cost.of 200mm dia (Sch.80)Pipe Mtr. 50.00 1927.88 96,394.20
Cutting slot in casing pipe for recharge of rain
Labour for packing gravel outside the tube well
317 177 Cost of washed gravel. Cum 9.40 1902.63 17,884.74
318 178 For Production well. 0 0.00 0.00 0.00
2 H.P three phase 3 stage head range 30 to 54
319 179 metres, discharge 155 to 110 L.P.M with outlet Each 2.00 19618.21 39,236.42
dia of 32mm
320 180 DOL controll pannel Each 2.00 4490.49 8,980.98
321 181 2.50sqmm cable Mtr 150.00 151.16 22,673.70
322 182 32mm dia steel short piece Each 4.00 179.71 718.86
323 183 Steel rope with cover Mtr 130.00 31.51 4,095.78
324 184 Well cap Each 2.00 179.71 359.43
325 185 50mm size CI bracket Each 2.00 107.73 215.47
326 186 20mm dia rigid UPVC pipes Mtr 100.00 8.14 814.20
Construction of 6.75mx3.60m x 1.40m(h) Rain
water Recharge Pit
328 188 Sinking of tube well through D.T.H.Rig. 0 0.00 0.00 0.00
329 189 200mm dia- 0.0m to 30.00m Mtr. 25.00 923.47 23,086.70
330 190 Lowering of PVC casing pipe inside bore. 0 0.00 0.00 0.00
331 191 200mm dia- 0.0m to 30.00m Mtr. 25.00 212.99 5,324.75
332 192 Cost.of 200mm dia (Sch.80)Pipe Mtr. 25.00 1927.88 48,197.10
Cutting slot in casing pipe for recharge of rain
Labour for packing gravel outside the tube well
335 195 Cost of washed gravel. Cum 4.70 1902.63 8,942.37
336 196 Sub-Total of Plumbing Works 0 0.00 0.00 90,09,965.81
337 1 Electrical Works 0 0.00 0.00 0.00
338 2 Modular Wiring 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Recessed wirring to light point/ fan point/ exhaust
fan point/ call bell point with 1.5 sq.mm
FRLSH/LSZH PVC insulated copper conductor
of ISI marked with 20 mm dia PVC flexible non
metallic conduit FRLS type ISI marked 6A
modular type (anti bactorial & flame retradant
type) switch ISI marked and ceiling rose ISI
marked of modular type G.I box with metallic
cover plate (both side) (anti bactorial & flame
retradant type) of suitable size, modular box with
1.5 sq. Mm FRLSH PVC insulated single core
multistandard copper conductor as earth wire
339 3 including all accessories and connection as per 0 0.00 0.00 0.00
direction of Engineer -in -Charge. CATAGORY
AS FOLLOWS ,complete suitable for IPH
standard hospital. All the switches & sockets
should be warrantied for a replacement period of 2
years against defects with ncessary test report
& Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free
after sales service within warranty period for
acceptance of materials.
340 4 GROUP-A Nos 300.00 654.90 1,96,470.00
341 5 GROUP-B Nos 188.00 933.38 1,75,475.44
342 6 GROUP-C Nos 120.00 1283.84 1,54,060.80
Group control of point in Recessed wirring to light
point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLSH/LSZH PVC insulated
copper conductor of ISI marked
20 mm dia PVC flexible non metallic conduit
FRLS type ISI marked with 6A modular
type((anti bactorial & falme retradant type)) switch
ISI marked and ceiling rose ISI marked of
modular type G.I box with metallic cover plate
(both side)(anti bactorial & falme retradant type)
of suitable size, modular box with 1.5 sq. Mm
FRLS PVC insulated single core multistandard
copper conductor as earth wire including all
343 7 accessories and connection as per direction of Nos 88.00 1211.86 1,06,643.68
Engineer -in -Charge. CATAGORY AS
FOLLOWS ,complete suitable for IPH standard
hospital.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same board in
existing switch board with complete fitting by 01
no of 6A switch & socket (modular type)( (anti
bactorial & flame retradant type)) & other required
accessories of ISI marked as approved as per
direction of Engg. -in -Charge. complete suitable
for IPH standard hospital.(Maximum 02 nos point
in one circuit).All the switches & sockets should
be warrantied for a replacement period of 2 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 6A Plug on the separate board
with complete fitting by 01 no of 6A switch &
socket(modular type)( (anti bactorial & flame
retradant type)) with suitable size modular box &
cover(anti bactorial & falme retradant type)
including supplying of all required accessories of
ISI marked as approved as per direction of engg-
in-charge.., complete suitable for IPH standard
hospital.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for a
345 9 period of 10 years against manufacturing defects Nos 166.00 599.44 99,507.04
against which ncessary test report & Warrnaty
certificate to be submitted to the department for
genuinity of product & to avail free aftersales
service within warranty period for acceptance of
materials.
Supplying,fixing of 1x16A Plug on the separate
board with complete fitting by 01 no of 16A switch
& socket(modular type)((anti bactorial & flame
retradant type)) with suitable size modular box &
cover(anti bactorial & falme retradant type)
including supplying of all required accessories of
ISI marked as approved as per direction of engg-
in-charge.. , (For equipement power)All the
switches & sockets should be warrantied for a
346 10 replacement period of 10 years against defects Nos 100.00 761.10 76,110.00
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no of
16A+2 no 6A switch & socket(modular type) (
(anti bactorial & falme retradant type) with suitable
size modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as per
direction of engg-in-charge.. (For equipement
power)complete suitable for IPH standard
hospital.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 3x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no of
16A+3 nos 6A switch & socket(modular type) (
(anti bactorial & falme retradant type) with suitable
size modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as per
direction of engg-in-charge.. (For equipement
power)complete suitable for IPH standard
hospital.(Maximum 02 nos point in one circuit).All
the switches & sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free after sales service within
warranty period for acceptance of materials.
Receass wiring for circuit/submain wiring with the
following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable or
equievalant reputed make A catagory ISI marked
as approved, in recessed PVC conduit Heavy
duty FRLS of mentioned size as required as per
direction of Engg.-in-Charge. Ncessary test report
349 13 & Warrnaty certificate to be submitted to the 0 0.00 0.00 0.00
department for genuinity of product & to avail free
after sales service within warranty period for
acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor. In
350 14 20 mm dia non metallic heavy duty flexible Mtr 455.00 154.58 70,333.90
conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor in
351 15 20 mm dia non metallic heavy duty flexible Mtr 511.00 171.10 87,432.10
conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR)
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty conductor
352 16 .in 25 mm dia non metallic heavy duty flexible Mtr 666.00 310.34 2,06,686.44
conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5 sq.
mm copper wire for earth continuty conductor in
20 mm dia non metallic heavy duty flexible
353 17 conduit .(PDB to PSB/ GAYSER POINT/AC Mtr 388.00 192.34 74,627.92
POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty conductor
in 32 mm dia non metallic heavy duty flexible
354 18 conduit.(PDB to PSB/GAYSER. POINT/AC Mtr 200.00 289.10 57,820.00
POINT/DG PANEL ACCL TO EACH QTR
ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for phase
and neutral and 01 no of single core 2.5 sq. mm
copper wire for earth continuty conductor in 25
355 19 mm dia non metallic heavy duty flexible conduit Mtr 121.00 228.92 27,699.32
.(LFDB TO LBDB) (2X6+1X2.5)
4 nos single core 6 sq. mm copper wire for phase
and neutral and 02 nos of single core 2.5 sq. mm
copper wire for earth continuty conductor in 32
356 20 mm dia non metallic heavy duty flexible Mtr 66.00 343.38 22,663.08
conduit.(LFDB TO LBDB/power unit/point)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4 sq.
mm copper wire for earth continuty conductorin
357 21 32 mm dia non metallic heavy duty flexible Mtr 66.00 493.24 32,553.84
conduit .(LFDB TO FLOOR PANEL TO TPN BDB
light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core 10
sq. mm copper wire for earth continuty conductor
358 22 in 40 mm dia non metallic heavy duty flexible Mtr 66.00 746.94 49,298.04
conduit.(FLOOR PANEL TO TPN BDB power)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and earth
metal enclosed plug top along with 32 amps. C-
series, SP MCB, in sheet steel enclosure, on
surface or in recess, with chained metal cover for
the socket outlet, and complete with connections,
testing and commissioning etc. as required as per
direction of Engg.-in-Charge.. . ,All the
Components should be warrantied for a Nos 20.00 726.88 14,537.60
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying and fixing 32 amps, 415 volts, TPN,
industrial type socket outlet, with 4 pole and earth
metal enclosed plug top along with 32 amps. C-
series, TP MCB, in sheet steel enclosure, on
surface or in recess, with chained metal cover for
the socket outlet, and complete with connections,
testing and commissioning etc. as required as per
direction of Engg.-in-Charge.. . Equievalant
higher model of .All the Components should be
360 24 warrantied for a replacement period of 5 years Nos 2.00 5128.28 10,256.56
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing following size/ modules, GI
box along with modular base & metallic cover
plate (both side)(anti bactorial type) plate for
modular switches in recess etc as required as per
direction of Engg.-in-Charge. .All the Components
should be warrantied for a replacement period of 5
years against defects with ncessary test report
361 25 & Warrnaty certificate to be submitted to the 0 0.00 0.00 0.00
department for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
362 26 4 moudle(125mmx75mm) Nos 8.00 315.06 2,520.48
363 27 1 moudle(75mmx75mm) Nos 8.00 259.60 2,076.80
364 28 12 moudle(200mmx150mm) Nos 8.00 568.76 4,550.08
Supplying and fixing of following sizes of medium
class PVC FRLS conduit ISI marked along with
accessories in surface/recess including cutting
the wall and making good the same in case of
recessed conduit as required as per direction of
Engg.-in-Charge .
366 30 20 MM mtrs 30.00 115.64 3,469.20
367 31 25 MM mtrs 20.00 118.00 2,360.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supply and fixing modular type indicator on the
existing switch box/cover . Equievalant higher
model of or equievalant reputed make & model A
catagory ISI marked as approved as required as
per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects Nos 16.00 126.26 2,020.16
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying and installation of AC starter Modular
type, or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-415
Volt A.C. & O/L range of 9-14A range on mod Box
of suitable size including modular coveras
required as per direction of Engg.-in-Charge .All
the Components should be warrantied for a
369 33 replacement period of 5 years against defects Nos 20.00 730.42 14,608.40
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover. .as
required as per direction of Engg.-in-Charge.All
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty certificate to
be submitted to the department for genuinity of Nos 6.00 241.90 1,451.40
product & to avail free aftersales service within
warranty period for acceptance of materials.
S/F of Bakelite angle holder/batten holder or
equievalant reputed make A catagory ISI marked
as approved )of ISI marked conforming to IS-
1258/1987 in place of ceiling rose as per
direction of Engg.-in-Charge .All the Components
should be warrantied for a replacement period of 5
371 35 years against defects with ncessary test report EACH 18.00 71.98 1,295.64
& Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying,fixing of Blanking plate(modular type)(
(anti bactorial & flame retradant type)) in existing
switch box(anti bactorial & flame retradant type)
including supplying of all required accessories of
ISI marked as approved as per direction of engg-
in-charge.., complete suitable for IPH standard
hospital.It should be warrantied for a period of 10
years against manufacturing defects against
372 36 which ncessary test report & Warrnaty certificate Nos 12.00 49.56 594.72
to be submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
373 37 Light fitting Fixture & Fan 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of heavy
duty 300 mm sweep of exhaust fan in the existing
wall, including fixing & conntection as required as
per direction of Engg.-in-Charge. Replacement
374 38 Warranty will be 5 years. Nos 24.00 3683.96 88,415.04
Supplying, installation, of exhaust fan of heavy
duty 380 mm sweep 1400 rpm with louvers of
exhaust fan in the existing wall, including fixing &
conntection .as required as per direction of Engg.-
in-Charge. Replacement Warranty will be 5 years.
Supplying, installation, testing and commssioning
of 1400 mm sweep white/milky colour ceiling fan
including wiring the down rod of standard length
(upto 30 cm) with 1.5 sq mm PVC insulated,
copper conductor, single core cable etc. as
required.(With fan Regulator) as required as per
376 40 direction of Engg.-in-Charge.Replacement Nos 35.00 2607.80 91,273.00
Warranty will be 5 years.
Supplying, installation, testing and commssioning
of 1200 mm sweep white/milky colour ceiling fan
including wiring the down rod of standard length
(upto 30 cm) with 1.5 sq mm PVC insulated,
copper conductor, single core cable etc. as
required as per direction of Engg.-in-
377 41 Charge,Replacement Warranty will be 5 years.. Nos 70.00 2505.14 1,75,359.80
.(With fan Regulator)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
Recess mounted LED luminaire made up of
CRCA powder coated sheet steel housing of 595
X 595 mm x 70 mm size with of not more than
25W and system lumens output not less than
3250 lumens (130 lm/ wt) with diffusers for
better light transmission and pure effect with High
luminous flux LEDs for better light output, CRI not
less than 80, CCT of 5700-6500 degree K, THD
less than 10%,internal surge protection of 3 KV,
complete with Non integrated isolated electronic
378 42 driver (protects the output /secondary side from No 22.00 3158.86 69,494.92
any disturbance on the input / primary side
ensuring safe operation)and all other accessories
suitable for operation on140- 270 V, 50 Hz ,L70
@50,000 burning hrs (5 years warranty)supply
.as required as per direction of Engg.-in-Charge .
The luminaire must be Replacement Warranty will
be 5 years.
Supplying and fixing of Energy efficient
recessed mounted LED luminaire made up of
CRCA powder coated housing, Top opening clean
room LED luminaire of 600 X 600 x 65 mm size
with of 45 W and system lumens output not less
than 4500 lumens , IP65 ,dust free & zero
maintenance , anti glare high transmittance
PMMA diffuser , operating volatge range 150-265
V, high performance potentiometric electronic
driver for zero maintenance , 2.5 KV internal urge
protection, L70 B 50: 50,000 hrs., CRI not less
379 43 than 80, CCT of 5700-6500 degree K, THD less Nos 8.00 6615.08 52,920.64
than 10%,,IP 65 protection complete with all
other accessories suitable for operation on 230 V,
50 Hz supply as required as per direction of
Engg.-in-Charge. .The luminaire should be
Replacement Warranty will be 5 years. .Each
CLEAN ROOM FITTING FOR OT ICU MRI CT.
Supplying and fixing of Energy efficient
surface mounted square shape 20 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting distribution
with wattage not more than 20 watt and lumen
output of 1500 lumens, , CRI not less than
80,CCT of 6000 degree K,THD less than 10%,
380 44 with electronic driver, internal surge protection of Nos 155.00 1791.24 2,77,642.20
2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)
and all other accessories suitable for operation on
220 V to 240 V supply as required as per
direction of Engg.-in-Charge. .The luminaire
should be Replacement Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white powder
coated ,pressure die-cast Al housing ,with high
transmititivity,non-yellowing PMMA diffuser, with
wattage not more than 20 watt and lumen output
not less than 2600 Lumen ( 130 lumens/watt ) of
size 595 x595 x 70 mm , ,CRI not less than
80,CCT of 5700-6500 degree K,THD less than
10%, with Non integrated isolated driver (protects
the output /secondary side from any disturbance
381 45 on the input / primary side ensuring safe Nos 250.00 2865.04 7,16,260.00
operation), all other accessories , life : 50,000
burning hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on 230
V, 50 Hz supply as required as per direction of
Engg.-in-Charge. The luminaire should be
Replacement Warranty will be 5 years.
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED tube
light having power rating not more than 20 watt
and lumen output not less than 2200 lumen
complete with electronic driver and all other
accessories with diffuser having 5 years warranty
i/c connection etc as required as per direction of
Engg.-in-Charge.. The luminaire should be
Replacement Warranty will be 5 years .
SITC of Sleek LED 10 watt mirror light fitting with
extruded polycarbonate housing,High optically
efficient diffuser,above wash basin complete with
all accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC insulated,
copper conductor, single core cable and earthing
etc. as required as per direction of Engg.-in-
Charge.
The luminaire should be Replacement Warranty
will be 5 years
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K with
12 w/mtr @ 5Mtr pool with Driver extra as
required as per direction of Engg.-in-Charge The
luminaire should be Replacement Warranty will be
5 years
Supplying and fixing of small focus light for small
monuments as 30W , 5700 K required as per
direction of Engg.-in-Charge The luminaire
385 49 should be Replacement Warranty will be 5 years Nos 4.00 3307.54 13,230.16
Supplying and fixing extra conduit down rod of 20
cm length G.I. pipe 15 mm dia, heavy gauge
including painting etc. as requiredas required as
386 50 per direction of Engg.-in-Charge . Nos 188.00 38.94 7,320.72
(Note : More than 5 cm length shall be rounded to
the nearest 10 cm and 5 cm or less shall be
ignored)of ISI mark as approved.
387 51 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned way,
three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall be
fabricated to withstand IK09,the DB should be
properly pre-treated with 7 tank process and duly
powder coated, phosphatized with powder coated
finish, on surface/recess, complete with terminal
388 52 blocks,with suitable size FR PVC insulated 0 0.00 0.00 0.00
copper conducter up to terminal blocks, tinned
copper busbar, neutral busbar, earth bar, din bar.
or equievalant reputed make & model A catagory
ISI marked as approved. as per direction of
Engg.-in-Charge. The Distribution boards should
be Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral Bus
389 53 bar, Earth Bar & Cable ties for cable Nos 8.00 2558.24 20,465.92
management, prefitted masking sheet, IP43-IK09
with metal door(FOR LIGHT,POWER INDOOR,3-
PH,POWER LOAD) Warranty on DB is 2 years.
Supply and fixing of 12 way DD single pole and
neutral sheet steel MCB distribution board 250V
on surface/recess complete with tinned copper
bus bar, neutral bus bar, earth bar, din bar,
detachable gland plate, interconnections,
390 54 phosphatized and powder painted including Nos 8.00 2249.08 17,992.64
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
391 55 door)(only each EM. CONNECTION UPS LOAD) Nos 5.00 1926.94 9,634.70
8 Way(8+24) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral Bus
392 56 bar, Earth Bar & Cable ties for cable Nos 8.00 3188.36 25,506.88
management, prefitted masking sheet, IP43-IK09
with metal door(FOR LIGHT,POWER INDOOR,3-
PH,POWER LOAD)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying and fixing 20 amps rating, 240 volts, C
series, Double poles MCB of in the existing MCB
DB complete with connections as per direction of
Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years .MCB
should have the fault indication system in different
colour for ON, OFF & TRIP condition or Mid trip
position for Trip conditions for easier identification Nos 2.00 392.94 785.88
of fault.Warranty on MCB is 5 years.
Supplying and fixing 6 amps to 32 amps rating,
240 volts, C series, single poles MCB of or
equievalant reputed make & model A catagory ISI
marked as approved. the existing MCB DB
complete with connections as per direction of
Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years.MCB
394 58 should have the fault indication system in different Nos 188.00 155.76 29,282.88
colour for ON, OFF & TRIP condition or Mid trip
position for Trip conditions for easier identification
of fault.Warranty on MCB is 5 years.
Supplying and fixing 40 Amps rating, TPN, 415
volts, RCCB,300mA . in the existing MCB DB
complete with connections, testing and
commissioning etc. as required as per direction of
Engg.-in-Charge. .(4W TPN BDB IC)AC ODU
395 59 CONTROLLER). The RCCB should be Nos 8.00 2650.28 21,202.24
Replacement Warranty will be 5 years
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.The RCCB
should be Replacement Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA or equievalant reputed make &
model A catagory ISI marked as approved in the
existing MCB DB in the existing MCB DB
complete with connections as per direction of
399 63 Engg.-in-Charge.(for power BDB & AC ODU, 8 Nos 8.00 3116.38 24,931.04
way TPN BDB IC).The RCCB should be
Replacement Warranty will be 5 years
400 64 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate 600
mm x 600mm x 6 mm thick ISI marked including
accessories and providing masonary with cover
plate having loccking arrangement and watering
pipe etc (WITH charcoal and salt) as required as
401 65 per direction of Engg.-in-Charge. The entire Nos 2.00 16398.46 32,796.92
earthing system should be Replacement
Warranty will be 5 years
S/IT/C of materials and installation of pipe earth
electrode made out of 50mm dia class B G.I. pipe
of 3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut bolts
& washers including cost of burnt wood charcoal,
salt, foreign soil, water pouring arrangements,
402 66 brick masonary enclosure on top with removable Nos 2.00 2954.72 5,909.44
RCC cover complete with labour for excavation of
pit in all kinds of soil & rock as required and as
per direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
403 67 surface or in recess for loop earthing as Mtr 111.00 113.28 12,574.08
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip
on surface or in recess for connections etc. as
required as per direction of Engg.-in-Charge.
Providing and fixing 50mm x 5 mm copper strip
on surface or in recess for connections etc. as
required as per direction of Engg.-in-Charge.
Supplying and making brick massonary pedastal
with extra super structure including cement
plastering etc as required as per direction of
Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying of one number PVC insulated armoured
and PVC sheathed XLPE property AL. conductor
power cable of 1.1 KV grade of following size
cables as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be
409 73 submitted to the department for genuinity of 0 0.00 0.00 0.00
product & to avail free after sales service within
warranty period for acceptance of materials
410 74 3.5core x 240 sq mm ( TO MAIN PANEL ) Mtr 80.00 1303.43 1,04,274.24
411 75 3.5core x 120 sq mm ( DG PANEL1 RUNS ) Mtr 45.00 703.07 31,638.04
Supplying of one number PVC insulated armoured
and PVC sheathed XLPE property AL. conductor
power cable of 1.1 KV grade of following size
cables as per direction of Engg.-in-Charge.
Ncessary test report & Warrnaty certificate to be
412 76 submitted to the department for genuinity of 0 0.00 0.00 0.00
product & to avail free after sales service within
warranty period for acceptance of materials
3.5core x 95 sq mm ( FOR FDB 1F, POWER )
4core x 16 sq mm (FDB LIGHT 1 RUN UPTO 1F
415 79 4 core x 4 sq mm (for small power) Mtr 12.00 103.69 1,244.24
3.5core x 35 sq mm (To FDB LIGHT / power
416 80 BDB/UPS PANEL,separate panel for OT Mtr 12.00 257.72 3,092.69
Complex,MCU)
417 81 LAYING OF CABLE 0 0.00 0.00 0.00
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM direct in ground in the trench in one
418 82 horizental formation including excavation ,sand Mtr 12.00 153.40 1,840.80
coushing protection covering and refilling the
trench etc as required as per direction of Engg.-in
-charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
SQ. MM but not exceeding 120 SQ. MM direct in
ground in the trench in one horizental formation
including excavation ,sand coushing protection
covering and refilling the trench etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 120
SQ. MM but not exceeding 400 SQ. MM direct in
ground in the trench in one horizental formation
including excavation ,sand coushing protection
covering and refilling the trench etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
421 85 25 SQ. MM direct in ground in the EXISTING Mtr 12.00 49.56 594.72
PIPE etc as required as per direction of Engg.-in -
charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
422 86 SQ. MM but not exceeding 400 SQ. MM direct in Mtr 19.00 68.44 1,300.36
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM in open duct etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
424 88 SQ. MM in open duct 400 SQ. MM direct in Mtr 11.00 54.28 597.08
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
425 89 25 SQ. MM in surface with shaddle and screw Mtr 12.00 95.58 1,146.96
etc as required as per direction of Engg.-in -
charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
426 90 120 SQ. MM From 25 SQ. MM in surface with Mtr 11.00 151.04 1,661.44
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
427 91 400 SQ. MM From 120 SQ. MM in surface with Mtr 8.00 154.58 1,236.64
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Supplying and making end termination with brass
compression gland and aluminium lugs for
following mentioned size cable.as per direction of
Engg.-in-Charge.
429 93 3.5 core x240 sq mm Nos 4.00 855.50 3,422.00
430 94 4 core x16sq mm Nos 4.00 231.28 925.12
431 95 3.5 core x35 sq mm Nos 4.00 390.58 1,562.32
432 96 3.5 core x95 sq mm Nos 4.00 475.54 1,902.16
433 97 3.5 core x120 sq mm Nos 4.00 534.54 2,138.16
Providing,fixing and laying of following dia G.I.
pipe (medium class) in ground complete with G.I
434 98 fitting incl. trenching(75 mm depth)and refilling as 0 0.00 0.00 0.00
per direction of Engg.-in-Charge.
435 99 50 mm dia mtrs 12.00 486.16 5,833.92
Providing,fixing and laying of fallowing dia HDPE
pipe (medium class) in ground complete with
436 100 fitting incl. trenching(75 mm depth)and refilling as 0 0.00 0.00 0.00
per direction of Engg.-in-Charge.
437 101 200 mm dia mtrs 40.00 982.94 39,317.60
438 102 PANELS 0 0.00 0.00 0.00
439 103 MAIN CONTROL PANEL AT GF 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor mounted
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by siemens gray
powder cote paint is designed as G.A drawing as
440 104 per direction of Engg.-in-Charge.Warrentee Set 1.00 277324.78 2,77,324.78
period of replacement of panel & accessories
must be 5 years & compelete test certificate must
be submitted along with panel board including
component list.
In commer-1-01 number of 630A 4P
Icu=100%Ics,0, LSIG MCCB with micro
processor based release Electrical locking for
441 105 normal & DG(HVAC & MEDICAL 0 0.00 0.00 0.00
EQUIPEMENT)(200 KVA TRANSFORMER)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
In commer-2-01 number of 200A 4P
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable overload
from 36%-100% & Electrical locking for normal &
DG along with 01 no of 200A 4P onload
changeover switch (62.5 KVA DG 01 NO)
Busbar-1&2 04 numbers of 700Amps Aluminium
busbar with 1A/SQ.MM current carring capacity.
443 107 busbar duly sleeved by color coated PVC sleeve 0 0.00 0.00 0.00
& supported by suitable size DMC insulator. (for
outgoing)
Out going- 06 numbers of 63A 4P MCB (make-
Legrand or equivalent reputed make ISI
444 108 marked)BDB P/AC,(timer panel & water supply 0 0.00 0.00 0.00
management,,FIRE,WTP,STP & GF POWER)
Out going-3 numbers of 125A 4P Icu=50%Ics,
LSIG MCCB withTMR based release with
adjustable overload (FLOOR RAW POWER
445 109 PANEL ,SPARE,DG PANEL OF OT COMPLEX 0 0.00 0.00 0.00
& MCU,AC )
Out going- 6 numbers of 32A 4P MCB ((LIGHT
446 110 SUPPLY) 0 0.00 0.00 0.00
Instrument- (i) 03 numbers phase indicating lamp
with toggle switch & HRC fuse.
(ii) 02 set of digital type multifunction meter with
CT for voltage,current,frequency,PF,THD
indication with RS 485 COMPACTIVITY FOR
bms data.
(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB
450 114 FDB LIGHT AT1F 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor mounted
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by simens grey
powder cote paint is designed as G.A drawing.
(FOR ALL MAIN CONNECTED LOAD)
451 115 BUILDING LIGHT)as per direction of Engg.-in- Set 1.00 29528.32 29,528.32
Charge. Warrentee period of replacement of panel
& accessories must be 5 years & compelete test
certificate must be submitted along with panel
board including component list.
In commer- 01 no 63A 4P MCB 10kA,C series
with on/off trip indication Light load for each floor.
Busbar- 04 numbers of 63Amps,50kA
Electrolytic copper busbar duly sleeved by color
coded PVC sleeve & supported by suitable size
DMC insulator.
Out going- 06 nos 32A 2P MCB 10kA,C series
UPS Light load for each area UBDB.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Instrument- (i) 03 numbers phase indicating lamp
with toggle switch & HRC fuse.
(ii) 01 set of 0-60Amps Ammeter with
456 120 CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or 0 0.00 0.00 0.00
equievalant make & model)
(iii) 01 set of 0-500 voltmeter
457 121 .(DIGITAL)(Sicure/L&T or equievalant make & 0 0.00 0.00 0.00
model)
FDB RAW POWER AT 1F & OT COMPLEX
458 122 AREA ALONG WITH DOCTORS ROOM WITH 0 0.00 0.00 0.00
DG SUPPLY
S/I/T&Commissioning of LT indoor floor mounted
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by simens grey
powder cote paint is designed as G.A drawing.
(FOR ALL MAIN CONNECTED LOAD)
459 123 BUILDING POWER/AC)as per direction of Engg.- Set 1.00 101782.08 1,01,782.08
in-Charge. Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component list.
In commer- 01 no 125A 4P MCCB 25kA, with
ROM & S. Link. (Icu=100%Ics)with shunt trip.with
460 124 axulary for BMS or equievalant make. 0 0.00 0.00 0.00
Busbar- 04 numbers of 125Amps,50kA
Electrolytic copper busbar duly sleeved by color
coded PVC sleeve & supported by suitable size
DMC insulator.
Out going- 04 nos 63A 4P MCB 10kA,C series
for power BDB.
Out going- 02 nos 32A 4P MCB 10kA,C series
forExtra power BDB.
Instrument- (i) 03 numbers phase indicating lamp
with toggle switch & HRC fuse.
(ii) 01 set of MFM with CTS.(DIGITAL)
UPS PANEL FOR OT, & OTHER
466 130 EMERGENCY(COMMON & OT COMPLEX,HDO 0 0.00 0.00 0.00
CRITICAL)
S/I/T&Commissioning of LT indoor floor mounted
cubical type electrical main panel (for both light
and power circuit) made out by 2mm CRCA steel
sheet duly derusted & painted by simens grey
powder cote paint is designed as G.A drawing.
(FOR ALL MAIN CONNECTED LOAD)
467 131 BUILDING EMERGENCY LIGHT)as per direction Set 1.00 66397.42 66,397.42
of Engg.-in-Charge. Warrentee period of
replacement of panel & accessories must be 5
years & compelete test certificate must be
submitted along with panel board including
component list.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
In commer- 01 numbers of 63 Amps 4P
MCB.(Icu=50% Isc) with shunt trip & axulary for
BMS & mechnical inter locking for one incommer
source to other.
Busbar- 04 numbers of 100Amps Electrolytic
copper busbar duly sleeved by color coded PVC
sleeve & supported by suitable size DMC
insulator.
Out going- 04 nos 32A 2P MCB UPS Light load
for each floor.
Out going- 03 nos 32A 4P MCB OT/ICU
POWER/OT MACHINE OR Bed head panel
Instrument- (i) 03 numbers phase indicating lamp
with toggle switch & HRC fuse.
(ii) 01 set of 0-100Amps Ammeter Digital type &
CTS.(DIGITAL)
(iii) 01 set of 0-500 voltmeter Digital
type.(DIGITAL)
NB- This panel should have proper earth by
suitable rated copper flat.
CABLE TRAY /RACE WAY FOR DISTRIBUTION
OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of or equievalant
reputed make & model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per UL
478 142 specifications.(With all mtrs 12.00 702.10 8,425.20
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of or equievalant
reputed make & model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per UL
479 143 specifications.(With all mtrs 12.00 814.20 9,770.40
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
submitted .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of or equievalant
reputed make & model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per UL
480 144 specifications.(With all mtrs 12.00 1077.34 12,928.08
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
submitted .
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI marked as
approved .(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL 54
MM HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
MARKED)
482 146 LIGHT SYSTEM 0 0.00 0.00 0.00
Supplying, Erection, Fixing, connection & testing
of LED BOUNDRY WALL Light of elegant look
equievalant reputed make & model A catogory, ISI
marked as approved 35 W LED street light having
die cast aluminium housing with toughened glass
having lumen efficacy of 110 lm/w or more (As
per LM 79 report of third party NABL lab) ,IP 65 Sets 4.00 3779.54 15,118.16
protection or more , LED street light model will be
vide having warrantied for a period of 5 years .
The luminaire should be supplied along with
bracket maintenance free for inspection as
required as per direction of Engg.-in-Charge.
Supply of materials and installation of pipe earth
electrode made out of 50mm dia class B G.I. pipe
of 3.0 metre long with arrangements for fitting/
termination of G.I. flat / wire with G. I. nut bolts
& washers including cost of burnt wood charcoal,
salt, foreign soil, water pouring arrangements,
484 148 brick masonary enclosure on top with removable Nos 2.00 2954.72 5,909.44
RCC cover complete with labour for excavation of
pit in all kinds of soil & rock as required and as
per direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
surface or in recess for loop earthing as required
485 149 as per direction of Engg.-in-Charge. Mtr 45.00 113.28 5,097.60
Providing and fixing 25mm x 5 mm copper strip
on surface or in recess for connections etc. as
486 150 required as per direction of Engg.-in-Charge. Mtr 4.00 1293.28 5,173.12
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
S/I/T&Commissioning of LT OUT DOOR FLOOR
mounted cubical type MCB ENCLOSURE made
out by 2mm CRCA steel sheet duly derusted &
pented by simens gray powder cote paint is
designed as G.A drawing. (FOR USE) with 20A
TPN MCB 01 NO model as per direction of Engg.-
in-Charge. Ncessary test report & Warrnaty
487 151 certificate to be submitted to the department for Set 1.00 2411.92 2,411.92
genuinity of product & to avail free after sales
service within warranty period 2 years of
acceptance of materials
Supplying,laying of 3cx2.5 sq.mm copper flexible
cable with insulated cover of reputed make,ISI
marked with all other concerned materials as per
direction of Engg.-in-Charge. Ncessary test report
& Warrnaty certificate to be submitted to the
488 152 department for genuinity of product & to avail free mtrs 66.00 125.08 8,255.28
after sales service within warranty period for
acceptance of materials
489 153 LIGHTENING CONDUCTOR 0 0.00 0.00 0.00
AIR TERMINAL & ACCESSORRIES LIGHTNING
ARRESTER+ MAST:
Providing and fixing of lightning conductor finial
made of 25 mm dia 300 mm long, G.I tube,having
single prong at top, with 85 mm dia 3 mm thick
G.I base plate including holes etc complete as
490 154 required with as per direction of Engg.-in- NOS 8.00 454.30 3,634.40
Charge.(RATE REFERING OSR 2018 SOR NO-
4.2) .The entire LA system should be
Replacement Warranty will be 5 years
Reveting, sweating and soldering of copper / G.I.
tape ( with another copper / G.I. tape, base of the
finial or any other metallic object) as required .as
per direction of Engg.-in-Charge. (RATE
491 155 REFERING OSR 2018 SOR NO-4.4) The entire mtrs 12.00 166.38 1,996.56
LA system should be Replacement Warranty will
be 5 years
Providing and fixing of G.I. tape 20 mm x 3 mm
thick on parapet or surface of wall for lightning
conductor complete as required. (For horizontal
run) as per direction of Engg.-in-Charge.(RATE
REFERING OSR 2018 SOR NO-4.7) The entire
LA system should be Replacement Warranty will
be 5 years
Providing and fixing of G.I. tape 20 mm x 3 mm
thick on parapet or surface of wall for lightning
conductor complete as required. (For virtical run)
as per direction of Engg.-in-Charge. (RATE
493 157 REFERING OSR 2018 SOR NO-4.8) The entire mtrs 12.00 114.46 1,373.52
LA system should be Replacement Warranty will
be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Providing and fixing of testing joint, made of 20
mm x 3 mm thick G.I. strip, 125 long with 4 nos of
G.I. bolts, check nuts and spring washer etc
complete as required as per direction of Engg.-in-
Charge. (RATE REFERING OSR 2018 SOR NO-
4.12) The entire LA system should be
Replacement Warranty will be 5 years
Providing and laying of G.I. tape 32 mm x 6 mm
from earth electrode directly in ground as required
as per direction of Engg.-in-Charge. .(RATE
495 159 REFERING OSR 2018 SOR NO-4.14) The entire mtrs 10.00 107.38 1,073.80
LA system should be Replacement Warranty will
be 5 years
Maintenance free Safe Earthing Electrodes with
ISI G.I. pipe dia 75mm as Secondary electrode
with wall thickness of 2.6 mm and the Primary
Earthing Electrode will be 50mm X 6mm X 1no
M.S. hot dipped galvanized strip filled with a
highly conductive & non-corrosive compound in
between the Primary Earthing and the secondary
Earthing, the Surface Area in will be
7,06,500sqmm for 3mtrs length and Cross
Sectional Primary conducting area is 300 sq.mm.
An Solid G.I. Base plat seals the unit at the
496 160 bottom. as per direction of Engg.-in-Charge. SET 2.00 16531.80 33,063.60
(MES-GFC ground Filling compound will be
provided in 25 kgs Bags.)(MES-GFC ground
Filling compound will be provided in 25 kgs
Bags.)(2 bags required for each earthing
electrode.)(FOR lightening protection & Building
Electrification).The entire earthing system should
be Replacement Warranty will be 5 years.
497 161 Sub-Total of Electrical Works 0 0.00 0.00 42,80,953.03
498 162 HVAC Works 0 0.00 0.00 0.00
499 163 Supply of A,C with indoor and outdoor unit 0 0.00 0.00 0.00
1.5 TR high wall split A.C 3Star
(Make:Toshiba/Hitachi/Carrier/Diakin or eq.
501 165 REFRIGRANT PIPING 0.00
Supply,installation of hard/soft copper
refregrant piping,complete with fitting of bends
and other nesessary material to complete the
503 167 1 TR to 3 TR high wall split A.C mtr 12.00 988.84 11,866.08
504 168 FRAME WORK 0.00
Supply,installation & fabrication of MS base
505 169 frame for both indoor and outdoor unit and 0.00
other nesessary material to complete the job.
506 170 1 TR to 3 TR high wall split A.C no 12.00 1984.76 23,817.12
507 171 DRAIN PIPING 0.00
Supply,installation & fabrication of Insulated
drain water piping from indoor to nearestdrain
point separate to all and other nesessary
material to complete the job.
509 173 25mm nom. Dia pipe,B1 mtr 12.00 178.18 2,138.16
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
510 174 SHEET METAL WORKS 0.00
511 175 CONTROL CABLE 0.00
Supply,laying of control cable and other
nesessary material to complete the job.
513 177 For 1 TR to3 TR high wall split A.C no 15.00 145.14 2,177.10
514 178 Sub-Total of HVAC Works 0 0.00 0.00 7,05,348.54
515 1 Firefighting Works 0 0.00 0.00 0.00
516 2 PUMPS AND APPURTENANCES 0 0.00 0.00 0.00
Supplying, installation, testing and commissioning of electric
driven pressurisation pump suitable for automatic operation
and consisting of following, complete in all respects, as
required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron
body and bronze impeller with stainless steel shaft,
mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type
suitable for operation on 415 volts, 3 phase 50 Hz AC
supply with IP 55 class of protection for enclosure,
horizontal foot mounted type with Class-'F' insulation,
517 3 conforming to IS : 325. M.S.fabricated Common base plate, 0 0.00 0.00 0.00
coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and
with anti vibration pads.
518 4 450 lpm upto 56 m Head(10HP) Nos 1.00 133104.00 1,33,104.00
519 5 PIPE & VALVES ETC. 0 0.00 0.00 0.00
Supply,Installation,Testing & Commissioning of 'C' Class
heavy duty MS pipe (as per IS 1239 upto 150 mm NB and
IS 3589 for above 150 mm 6mm thick) with flanges and
fitting such as bends, tees, reducers, rubber insertions and
galvanized nuts and bolts of following size on surface along
520 6 wall / shaft with MS bracket, suspended from ceiling/ beam 0 0.00 0.00 0.00
with suspenders duly painted with two coats of primer and
finished with enamel paint of approved colour laid through
pipe or in trench after wrapping with hassen cloth after
applying coal tar primer as required as per direction of
Engineer-in- charge.
521 7 80mm NB Mtr 67.00 2406.02 1,61,203.34
522 8 100mm NB Mtr 78.00 3393.68 2,64,707.04
Providing laying, testing & commissioning of 'C' class heavy
duty MS Pipe conforming to IS 1239/3589 i/c fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in
ground including welding, excavation & providing cement
523 9 concrete blocks as supports, anticorrosive treatment with 0 0.00 0.00 0.00
coaltar/asphalt tape as per IS 10221, refilling the trench etc.
of following sizes complete as required.as per direction of
Engineer-in- charge.
524 10 100mm NB Mtr 10.00 3722.90 37,229.00
Providing, fixing, testing and commissioning of following
size manually operated hand lever type cast iron double
flanged slim seal wafer type Butterfly valves with EPDM iron
disc as per IS-13095 having pressure ratting PN -1.60
525 11 including fixing the same with supply of required jointing 0 0.00 0.00 0.00
materials like rubber insertion, MS nuts & bolts, paint etc.
and testing the joints with required water pressure etc. all
complete as per specification & direction of E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
526 12 100mm NB Nos 1.00 6925.42 6,925.42
Providing, fitting & fixing of following size cast iron double
flanged type dual plate Non return Valve as per IS- 5312
(Part 1): 2004 with ISI mark of pressure ratting PN-1.60
including fixing the same with supply of required jointing
527 13 materials like flanges, rubber insertion, MS nuts & bolts, 0 0.00 0.00 0.00
paint etc. and testing the joints with required water pressure
etc. all complete as per specification & direction of Engineer-
in-charge.
528 14 100 mm NB Nos 1.00 15238.52 15,238.52
Supply,Installation,Testing & Commissioning of Pressure
gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball
529 15 valves of suitable size with all accessories as per direction Nos 1.00 2370.62 2,370.62
of Engineer-in-charge
Supply,Installation,Testing & Commissioning of Pressure
Switch with cut-off bronze ball valves with integral strainer &
530 16 flare nut (mixed ends) of suitable size with all accessories Nos 1.00 3047.94 3,047.94
as per direction of Engineer-in-charge.
Providing, installation, testing and commissioning of
stainless steel Y-strainer fabricated out
531 17 of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm 0 0.00 0.00 0.00
dia holes with stainless steel flangeas per direction of
Engineer-in-charge.
532 18 150mm NB Nos 1.00 15930.00 15,930.00
533 19 WET RISER CUM DOWN COMER SYSTEM 0 0.00 0.00 0.00
Supplying and fixing single headed internal hydrant valve
with instantaneous
Gunmetal/Stainless Steel coupling of 63 mm dia with cast
534 20 iron wheel ISI marked conforming Nos 4.00 9545.02 38,180.08
to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel
cap and chain as required :
Supply,Installation,Testing & Commissioning of SS short
branch pipe with 63 mm male inlet and 19 mm outlet Nos 4.00 4751.86 19,007.44
nozzle, as per IS:903 and as per direction of Engineer-in-
charge.
Supply,Installation,Testing & Commissioning of 63 mm NB
and 15meter long RRL Fire Hose fitted 63mm
intstantaneous stainless steel male & female SS coupling,
536 22 complete by GI wire binding for Internal Hydrant as per Nos 4.00 8343.78 33,375.12
direction of Engineer-in-charge.
Providing supply & fixing of MS Hose Box for of suitable
size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of
537 23 30 mtr long fire hose and a branch pipe, wall mounted type Nos 4.00 6372.00 25,488.00
as per direction of Engineer-in-charge.
Supply,Installation,Testing & Commissioning of Swinging
pattern wall fixing first aid hose reel made from MS sheet
and waterways and moving parts with rubber hose of 20
538 24 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle Nos 4.00 11477.86 45,911.44
as per IS: 444/IS: 12585 Type-I., complete with all
accessories as per direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Providing, fitting and fixing of C.I. 25 MM single air relief
valve with stop cock confirming to IS:14845/2000 with ISI
mark for water works purpose including fixing the same with
539 25 hydrant riser including testing & commissioning the system Nos 4.00 1693.30 6,773.20
etc. all complete as per approved specification & direction of
Engineer-in-charge.
540 26 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying, installation,
testing and commissioning of CO2 type Fire Extinguisher
4.5 kg capacity confirming to IS: 2878 made from ISI
marked seamless cylinder confirming to IS: 7285, fitted with
541 27 ISI marked controlled valve confirming to IS: 3224, high Nos 8.00 14309.86 1,14,478.88
pressure 1mtr discharge hose & horn complete with initial
gas charged with carrying handle & wall mounting bracket
as per direction of Engineer-in-charge.
Supplying, installation, testing and commissioning of
Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI
marked, IS: 10204, containing 540 ml AFFF liquid ISI
542 28 marked, IS: 4989 Part II and a polyurethane coated CO2 Nos 2.00 6005.02 12,010.04
Gas Cartridge, ISI marked, IS: 4947 complete with
gunmetal union cap, nylon hose with plastic foam making
branch and wall mounting bracket as per direction of
Engineer-in-charge.
543 29 AUTOMATIC FIRE DETECTION SYSTEM 0 0.00 0.00 0.00
Supplying, installing ,testing and commissioning of Digital
Manual Call Point, Flush mount Resettable (Non-Breaking
Glass), Supplied with surface mount back box and Special
545 31 Reset Key, Optional Accossories:4556356, Each 3.00 6323.62 18,970.86
4556520(Certified by LPCB) as per direction of Engineer-in-
charge.
546 32 Electronic Hooters 0 0.00 0.00 0.00
Supplying, installing ,testing and commissioning of
Intelligent Sounder Strobe, Addressable Sounder with
Visible Indicator, 16 tones, high/low consumption modes,
547 33 can be loop owered or 24VDC powered, 83-89dB (Certified Each 3.00 10159.80 30,479.40
by LPCB) as per direction of Engineer-in- charge.
548 34 Wiring 0 0.00 0.00 0.00
Supplying and drawing of 2X1.5 sq.mm PVC insulated
PVC Sheathed FRLS copper cable with 20 mm dia
549 35 medium class PVC conduit surface/ recessed conduit with Mtr. 98.00 115.64 11,332.72
all accessories as per direction of Engineer-in-charge.
Supplying & laying of 2x1.5 sqmm fire alarm armoured
cable,600/1000V rated with annealed copper conductor
having XLPE insulation, steel wire armouring & FRLS outer
sheath complete as required as per direction of Engineer-in-
charge.
Supplying and fixing metal box of following sizes (nominal
size) on surface or in recess with suitable size of phenolic
551 37 laminated, sheet cover in front including painting etc. as NOS 12.00 151.04 1,812.48
required. 100 mm X 100 mm X 60 mm deep.as per
direction of Engineer-in-charge.
Supply Installation of Sinage floor, entery Exit, Stair
552 38 cass,Lift and other.as per direction of Engineer-in-charge. Nos 8.00 1062.00 8,496.00
553 39 PA SYSTEM 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying, installation, testing & commissioning of
ceiling/wall mounted loud speaker, 3/15 Watt in ABS
554 40 enclosure complete as required Nos. 8.00 2350.56 18,804.48
Supplying and drawing of speaker cable Single pair, 2-core,
555 41 1.5 sqmm in existing conduits Mtr. 322.00 76.70 24,697.40
556 42 Sub-Total of Firefighting Works 0 0.00 0.00 10,68,720.10
557 0 Other Works 0 0.00 0.00 0.00
558 1 1X62.5KVA DG 0 0.00 0.00 0.00
Supply, Transportation, erection, testing and
commissioning of 3 Phase, 415V, 50Hz, water
cooled multi cylinder diesel generator set with
alternator of 62.5KVA out put contineous rating
directly coupled Engine and Alternator with guard
and mounted on a common base plate of Robust
construction and complete with AMF panel having
IP-52 protection, Acoustic Enclosure as per CPCB
norms , sound absorbing material, to restrict
sound level up to 75 dB up to 1 mtr distance and
559 2 as per CPCB norms etc as per following 0 0.00 0.00 0.00
specifications mentioned below.
A. Alternator as per direction of Engg.-in-Charge.
Warrentee period of panel must be 5 years &
compelete test certificate must be submitted along
with DG set including component list & smoke
exhaust system drawing,certified ISO 8528
ALTERNATOR:The alternator of the output rating
shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at
1500 RPM. The alternator is self excited, self
560 3 regulated, and shall confirm to IS: 13364 of 1992 0 0.00 0.00 0.00
with regulation of +5% from no load to full load.
degree of protections shall be IP21.
ENGINE: Diesel Engine . Diesel Engine start,
developing suitable BHP output at 1500 RPM with
mechanical / electronic governing so as to enable
the alternator to give 62.5KVA continuous output
at 0.8 P.F. lagging at NTP conditions. The diesel
engine shall be capable of providing 10% O/L for
1 Hr for every 11 Hrs of continuous running at full
load. The engine with 1st filling of oil and Diesel
01. Exhaust pipe of required size and length with
insulation or clading.
02. Diesel tank suitable for 8 to 10 Hours running
capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the
Manufacturer standards
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
AMF PANEL: Cubical, Compartmentalized, AMF
Panel Baord with all Power & Control Contractors,
Switches, Meters and other accessories, Internal
564 7 Wiring, connection, inter-connection etc. for 0 0.00 0.00 0.00
Trouble Free smooth function for 62.5KVA DG Set
complete with Battery Charger & leads as
required.
BASE PLATE: Common Base Plate of required size
for mounting of Engine Alternator Set fabricated
566 9 from MS Channerl and vibration damping 0 0.00 0.00 0.00
arrangement with cushy foor mounting including
paintng etc. as required.
FOUNDATION: Suitable size Cement Concrete
(1:2:4) foundation duly plastered and finished
with neat coat Cement as required along with
smoke exhaust system piping including base frame
of structure & lightening protection system. *It
568 11 also includes 2 nos GI pipe earthing for body and 2 Set 1.00 1275120.98 12,75,120.98
nos copper plate earthing for neutral, control
cable of 15mtr 2.5sqmm 6core , civil foundation
(The Manufacturing of DG set shall not in any case
be more than six months old from the date of
award of work)
15 PASSENGER HOSPITAL LIFT WITH WIRRING
Design Supply, Installation, Testing &
Commissioning and putting into operation with
compelete inspection by concerned electrical
inspector, Director Factory and Boilers, Odisha
with proper testing certificate and final testing of
Automatic Lift complete with all standard
equipments accessories and control equipments
as per Manufacturer's Design with lift control
panel including BMS facility and as per BIS and
fulfilling following requirements.It includes
supply,laying of power cable and fixing of
570 13 glands,lugs etc.( Machine room less, Gearless 0 0.00 0.00 0.00
Type).Design and as per CPWD /OPWD
specification (Part - III Lifts) 1981 with valid
lisence for installation and fulfilling following
requirements on turnkey basis as per direction of
Engg.-in-Charge. LIFT OF machineroom less
typeWarrentee period of accessories & system
must be 5 years & compelete test certificate must
be submitted along with Lift including component
571 14 Type: HOSPITAL PASSENGER LIFT 0 0.00 0.00 0.00
572 15 Load: 15 PASSENGER(1020KG) 0 0.00 0.00 0.00
573 16 Speed: 1.0 Meter Per Second. 0 0.00 0.00 0.00
Control: Variable voltage with variable frequency
Operation: Microsprocessor based simplex
576 19 Total Rise: About 8 Meters. 0 0.00 0.00 0.00
577 20 Landings: For All on same side. 0 0.00 0.00 0.00
578 21 Floors Served: GF,1F 0 0.00 0.00 0.00
Signals: Digital Car Position Indicator, Car Travel
579 22 direction Indicator in Car & at all Landings. 0 0.00 0.00 0.00
Lift Shaft Size: About as 20 passenger lift
standard, finished with Plaster.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
581 24 Lift Car Size: About lift standard. 0 0.00 0.00 0.00
Car Entrance: Clear Opening lift standard high
Protected with Car Door.
Landing Entrance: Clear Opening lift standard
high Protected with Landing Door.
Car Door: Stainless with front glass to transparent
584 27 Two Panel Center opening flush type.outer visible. 0 0.00 0.00 0.00
Landing Door: Mild Steel Two Panel Center
opening flush type P.
Door Operation: Automatic Electric Power
operated Door with in infrared protection.
Car Interior: Stainless Steel Panel with Hair line
finish on all sides.
Car Floor: Hard Wood covered with PVC / Marblex
Tiles.
Car Ceiling & Lighting: Fluorescent Lighting
Concealed by suspended false ceiling with plain
589 32 acrylic diffiuser. The frame of suspended false 0 0.00 0.00 0.00
ceiling shall be of powder coated Aluminum.
Car Ventilation: Pressure Fan with anodized
Aluminum Grill.
Emergencing Lighting in Car: Battery operated
591 34 Emergencing Lighting in the Lift Car. 0 0.00 0.00 0.00
Intercom System: Battery operated intercom
system in Lift Car and Control Room.
Emergencing Alarm: Battery operated Alarm Bell
System in Lift Car and Control Room.
Position of Machine Room: Directly above the Lift
Shaft.
Electric Power Supply: AC 415 Volt 3 Phase 50 Hz
terminated in control room along with control
595 38 panel with facility of BMS connectivity system 0 0.00 0.00 0.00
.The scope of lift control panel is inclussive with
lift vender scope.
596 39 OTHER SPECIAL PROVISIONS 0 0.00 0.00 0.00
597 40 • VVVF CONTROLLER 0 0.00 0.00 0.00
598 41 • AUTOMATICE RESCUE DEVICE (ARD) 0 0.00 0.00 0.00
• EMERGENCY LIGHT AND BATARY OPERATED
ALARAM BELL
• DOT MATRICKX SEVEN SIGMENT DIGITAL
POSITION INDICATORS
601 44 • FIRE RATED DOOR FOR 1 HOUR 0 0.00 0.00 0.00
• 3 WAY INTER COM/PRESS AND SPEAK BUTTON
WITH HAND SET
603 46 • FLOOR ANNUNCIATOR WITH MUSIC 0 0.00 0.00 0.00
604 47 • INFRA RED SCREEN 0 0.00 0.00 0.00
605 48 • OVER LOAD WARNING INDICATOR 0 0.00 0.00 0.00
606 49 • BRAILLE BUTTONS 0 0.00 0.00 0.00
607 50 • FREE SERVICE FOR 5 YEARS 0 0.00 0.00 0.00
608 51 • PIT LADER 0 0.00 0.00 0.00
• FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME
• PROVISION FOR CC CEMARA WITH
INSTRUEMENT
Fire Man Switch: Fire Man Switch at Main Landing
Terminal.
1 X250 KVA ,11/0.4KV PLINTH MOUNTED
SUBSTATION
Supplying & installation of 100x116 mm RS Joist,
9 mtr long x 2 nosx23 Kg=414 Kg
Supplying & installation of Pressure Channel 100 x
614 57 50 x 6mm MS channel each 2.8 mtr. Long( 9.2 K.g. K.g. 33.00 148.68 4,906.44
per mtr.)x2 Nos
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
Supplying & installation of S/S DP bressing
615 58 chhanel 75 x 40 x 6mm MS channel each 2.8 mtr. K.g. 33.00 148.68 4,906.44
Long( 6.8 K.g. per mtr.)x2 Nos
Supplying & installation of AB Swith & HG Fuse,
616 59 Mounting Channel 75x40x6 -2.8 mtr.long, 4 K.g. 33.00 148.68 4,906.44
nos.(6.8K.g. per mtr.)
Supplying & installation of Cantilever chhanel for
617 60 supporting AB Switch arm, 75x40x6-1 mtr. Long, 2 K.g. 33.00 148.68 4,906.44
nos.(6.8 K.g. per mtr.)
Contilever chhanel for supporting HG Fuse 50 x 50
618 61 x 6 mm MS Angel (1.0 mtrs. Long 2 nos.)4.5K.g. per K.g. 33.00 148.68 4,906.44
Supplying & installation of Angle for Cantilever
619 62 arrrangement for AB Switch & HG Fuse 50 x 50 x 6 - K.g. 33.00 148.68 4,906.44
2 mtr .each 2 nos.(4.5 K.g. per mtr.)
Supplying & installation of S/S DP bressing Angle
620 63 50 x 50 x 6 mm - 2.8 mtr. Long 2 nos.(4.5 K.g. per K.g. 54.00 148.68 8,028.72
mtr.) with side angel ( Total 9 mtr.)
Supplying & installation of Angle for mounting LT
621 64 distribution Box 50 x 50 x 6 mm MS Angel -2.5 K.g. 41.00 148.68 6,095.88
mtrs.each Long 2 nos.( 4.5 K.g. per mtr.)
Supplying & installation of 11KV AB Switch 3 Pole
Supplying & installation of 11KV HG Fuse 3 Pole
Supplying & installation of 11 KV L.A. 12KV-10KA
Supplying & installation of+B7 H.T.stay set (
Complete )
626 69 Supplying & installation of H.T. Stay Insulator No. 3.00 95.58 286.74
Supplying & installation of H.T. Stay clamp (1.95
K.g./ Pair )
628 71 Supplying & installation of 7/10 SWG Stay Wire K.g. 35.00 148.68 5,203.80
Supplying & installation of of materials and
installation of pipe earth electrode made out of
50mm dia class B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of G.I. flat /
wire with G. I. nut bolts & washers including cost
629 72 of burnt wood charcoal, salt, foreign soil, water No. 6.00 3750.04 22,500.24
pouring arrangements, brick masonary enclosure
on top with removable RCC cover complete with
labour for excavation of pit in all kinds of soil &
rock as required and as per direction of Engineer-
in-charge.
630 73 Supplying & installation of No.6 GI Wire K.g. 21.00 211.22 4,435.62
Supplying & installation of 40x6mm GI Flat for
nutral
Fixing of stay set with 0.5Cum cement concret
foundation 1:3:6 size
632 75 ( 900mmx600mmx900mm) using 40mm BHG No. 6.00 3059.74 18,358.44
metal with all labour and material except stay set ,
stay wire , stay insulator .
Concreting of support C.C - 1:4:8 using 40mm BHG
metal size - 5'x2'x2' = 20CFT = 0.570Cum
633 76 Padding 900x600x150mm = 0.081 NO 8.00 3488.08 27,904.64
0.651Cum @ 3071.25= 1999.38 each
Couping of support section 15''x15'' ( 3.9Cft)
height 2'-6' ( 1' - 6'' above G.L & 1' - 0' below G.L )
in C.C 1:2:4 using 12mm BHG metal & curing for 5
Supplying & installation of Materials for
Machinery work for Earth Pit,Charcoal, Salt etc
including construction of earthing chamber (Size:
2"x2") and RCC slab cover
Supplying and Laying of HT cable on existing pole
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Abs. Head
Description of Item Unit Qnty. Rate Amount
3cx120 sq. mm XLPE cable.,11kv ,1 runs For 250
Supplying and making out door end termination
with cast resin compound aluminium lugs and
other jointing materials for 3cx120 sq.mm size of set 2.00 11510.90 23,021.80
PVC insulated armoured and PVC sheathed
aluminium conductor cable of 11 KV grade as
required.
Supplying & installation of 50x6mm copper Z
639 82 clamp for TFR LT 4nos x0.8kg each for connection Kg 21.00 1465.56 30,776.76
of LT cable
640 83 Supplying & installation of Red Oxide paint Ltr 13.00 148.68 1,932.84
641 84 All. Paint for painting of pole & transformer. Ltr 12.00 165.20 1,982.40
642 85 Black Paint for painting of angle & channel. Ltr 12.00 148.68 1,784.16
Supplying & installation ,fixing of Ms Nut , Bolt &
Washer
Supply & Installation of Out Door type
Transformer ONAN type with Copper winding
having 250 continuous KVA rating, 11 KV / 415
Volts 3 Phase 50 Hz Vector Group DY-11,
Transformer shall operate without injurious
heating at the rated KVA at any voltage within +/-
10% of the rated voltage of that particular
tap.Transformer shall be provided with ON Load
644 87 Tap Changer arrangement in steps of 1.25% with No 1.00 379370.00 3,79,370.00
range from + 5% to – 15%. Oil Conservator, Silica
jail breather having connecting terminals on HV
side suitable for bare condcutor conenction, Cable
End Box on medium voltage side suitable for 1.1
KV 3.5 Core UG Cable, on Double Pole Strucutre or
Brick / CC / RCC Platforms with all fittings,
accessories, fill with flitered Transformer Oil
including testing & commissioning etc. complete
as required.
Supplying & installation of 100x116mm RS Joist
4mtr longx23kg for resting of LT cable
Construction of Plinth for TFR 6ft hight (below
GL2ft)x5ftx5ft
Barbed Fencing (size 15'x15' )with constn. of
retaining wall ,erection of RCC fencing post, Sand
filling and metal spreading, Fixing of Iron gril gate
etc as per Tata Power specification
Providing and fixing 25mm x 5 mm G.I strip on
648 91 surface or in recess for connections etc. as Mtr 33.00 148.68 4,906.44
required.
Sundries for survey , PVC tape, Ampire
649 92 tape,Danger Board, small size nut & Bolt LS 1.00 7849.36 7,849.36
preparation of drawing cable socket etc
650 93 Sub-Total of Other Works 0 0.00 0.00 36,72,438.48
651 Grand Total 10,09,85,187.52
651 Grand Total 10,09,85,187.52
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SON 001 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sonepur CHC.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .