SPL REPAIRS TO QTR NO P-1/3 AND P-15/3 AT OFFRS MD ACCN, SPL REPAIRS TO BLDG NO P-201 INCLUDING ROOF TREATMENT AND ALLIED SERVICES OF OLD SAINIK INSTITUTE OF SATA BTY AND SPL REPAIRS TO BLDG NO P-15B (FIRST FLOOR) AND LIGHTENING CONDUCTOR OF UNIT KOT

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed.

M&L Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface fair and even complete all as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface fair and even complete as specified and directed

M & L for rendering 10 mm thick in cement Mortar (1:4) on the surfaces of ceiliing and finished the surface fair and even complete as specified and directed.

M&L for repair and rendering 10mm thick in cm 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed

Complete removal of existing treatment on wall surfaces complete all as specified.

M&L preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 3 mm thick to make the surfaces truly smooth complete all as specified.

M &L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M &L for applying one coats of distemper oil emulsion on old surfaces of wall / Ceiling including necessary preparation of surfaces complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on wall surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

M &L for preparation of old plastered surface and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M &L for preparation of old plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beding layer all as spd and directed by Engr-in charge.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise specifically provided for

Demolition of brick bats laid dry including returning filling spreading, levelling, watering and well ramming in layer in sunken floors.

M&L for water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:- (a) Laying plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound " Pidicrete URP manufactured by M/s Dr. Fixit or equivalent as per manufacturer instructions" ( note- integral water proofing compound shall be measured in supply only ).

(b) floor / vertacal skirting side plaster in CM 1:3, 15mm thick with and including using " Pidicrete URP" manufactured by Dr Fixit as per manufacturer instruction and 72 Hrs tesing for water tightness by ponding of water.

(c) Applications of two coats of proof coat black manufactured by Dr Fixit or equivalent as per manufacturers instructions all over and testing again for water tightness by ponding of water for 72 Hrs.

M&L cement concrete 1:5:10 Type E2 (40mm graded stone aggregate) as in mass concrete complete all as specified and directed.

S&F in repair Vitreous china white wash down water closet (Pedestal pattern) including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap, one piece closet with integrated cistern, seat cover and twin flush fittings complete all as specified and directed.

S&F Bath cabinet mirror of size 350 x 450 mm made of PTMT alloy complete all as specified. Make - Paryag

S&F chromium plated health faucet with 1 m long pipe complete all as specified and directed.

S&F chromium plated hand shower complete all as specified and directed.

S&F chromium plated toilet paper holder size 150 x150mm complete all as specified and directed. (Make - Plumber economical series or Marc/Jaquar/Seiko/Crabtree as approved by GE)

Supply only PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make all as specified and directed

S&F in repairs. vitreous china wash basin, white flat back size 550x400mm (excluding taps), incl.CP waste coupling & PVC waste pipe and brackets complete all as specified and directed.

S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed.

Taking up or down steel tubing and connection of 15 dia bore complete all as specified and directed.

Taking up or down steel tubing and connection of 20 dia bore complete all as specified and directed.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth complete all as specified and directed.

M&L 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connections in new or old position 15mm dia complete all as specified and directed.

M&L 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor

Refixing old steel tubing and connections in new or old position 20mm dia complete all as specified and directed.

S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore complete all as specified and directed.

S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore complete all as specified and directed.

S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore.

S&F in repairs Brass CP mixer tap 15mm dia bore (three in one) for mixing hot & cold water screwed down for iron pipe (Jaquar) complete all as specified and directed.

S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe (Jaquar) complete all as specified and directed.

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower.

S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges complete all as specified and directed.

Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed.

S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank complete all as specified and directed.

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

Taking down shutters area n exc 1.0 Sqm each complete as specified and directed.

Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete as specified and directed.

Taking down of shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and refixing in same opening shutters including cutting to size and fitting complete as specified and directed.

M&L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed.

S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed.

S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing

Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window

S & F Powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

m & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.

S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed

S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete as directed at site complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) complete all as specified and directed.

S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed.

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290.

S&F Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

S&F in repair Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames complete all as specified and directed.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required complete all as specified and directed.

S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required.

M&L cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces.

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

S&F in repairs decorative curtain rod made out of 25 mm dia (outer dia) MS pipe having wall thichness 0.63 mm, PVC coated of any coulor and pattern as approved overall dia 28 to 29 mm, including provn of two nos brackats on each ends and provn of two nos of globe on each ends for each window/door for fixing complete all as specified and directed. Make:- Vista , MEC.

S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board.

S & F utensil rack / Kitchen rack stainless steel size 850 mm x 800 mm x 250 mm approved Make complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling & waste pipe.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

S & F Corner Glass Shelf 300 mm (with ABS brackets) of size (300x300)mm complete all as specified and as directed.

S&F in repair soap Dish vitreous china Approx size 160x 160x90mm complete all as specified and directed

M&L for 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Demolition of side wall and top of old RCC water tanks 1000/500 ltrs capacity excluding tank beam and tanks bottom slab after removing existing inlet and outlet connection with all fitting and reparing remaining structure with plastering and making the surface flat and level in CM 1:4 complete all as specified and directed.

Dismantling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed.

Taking up or down steel tubing and connection of 25 mm bore complete all as specified directed at site.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket,elbow,nipple,union etc complete all as directed at site for 25 mm bore all as specified.

S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge

S&F in repair 25mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge

S & F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed

Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified.

M&L for 2nd class hardwood of sectional area exc.13 & n.exc 25 sqcm in plain fillets,square rectangular in section,clean sawn,secured with nails complete all as specified and directed

S&F 2nd class HW glazed and skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass. Gauze etc and all as specified in SSR and fitted to chowkhats complete all as specified and directed.

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165 all as specified & directed complete all as specified and directed.

S&F powder coated aluminium window shutter sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55 Kg/M including necessary joining cleats glazing clips rubber packing powder coated aluminium shop beading screws with two shutter including 5mm thick coloured glass and one shutter with stainless steel wire gauge including necessary locking arrangement and handle etc., as specified etc., complete all as specified and directed

S&F for aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 fixed with aluminium wire staple etc., complete all as specified and directed

S&F extruded aluminium alloy butt hinges 100mm size type B-21 all as specified & directed.

S&F 150 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and directed.

S&F aluminum handles cast type anodize 150 mm long complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 250mm long. all as specified

S&F in repair for curtain rails, anodised aluminium alloy with fixing brackets,stops,rollers etc

Dismantling of boarding any description, fixed in any position with screws all as specified and directed

M&L in repairs for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

M & L for applying three coats of white wash on newly plastered surfaces of ceilings after necessary preparation of the surface, complete all as specified and directed.

M&L for preparing newly platered surfaces and applying two coat of distember oil emulsion white or tinted on walls complete over one coat of primer including one coat of 3mm thick wall care putty on walls all as specified and directed

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer including one coat of 3mm thick wall care putty on walls complete all as specified and directed.

M&L for preparing the old surfaces by complete removel of existing treatment and applying two coat of cement based paint over a coat of primer on walls complete all as specified and directed.

Supply only integral water proofing compound. (Make - ACCO PROOF/WATER SEAL/ IMPERMO)

S&F brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x200x5to6mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm infloor etc,over 15 mm thick screed bed in CM(1:4),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

all as per item No. 71 above but on vertical surfaces such as skirtings,dados and risers to steps over 10 mm thick wall plaster in CM (1:4) complete all as specified and directed.

M&L for granite of any type tiles 20mm thick in steps, jambs, pillars, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed at site

M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate bedding of tiles/Kota stone all as specified and directed at site

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 40mm dia of low density polyethylene (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc., complete all as specified and direced

S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed

S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm dia PVC (SWR) WC connector with lip ring complete all as specified and directed.

S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints all as directed at site.

M&L for 75 mm thick PCC 1:4:8 Type B-2 using 40mm graded aggregate as in sub base all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in plinth protection etc finished cement concrete surface even and smooth without using extra cement all as specified.

M&L coloured chequered cement concrete tiles with grey cement and no pigment 25cm x 25 cm x 25mm thick , over 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Removing excavated soils n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glasing bars dovetail ed or welded all complete all as specified and as directed by Engr-in-Charge.

S&F 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. Make M/s Jain wood Industries

S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed by Engr-in-Charge.

S&F in repair GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples all complete all as specified and as directed by Engr-in-Charge.

S&F in repair 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge.

M&L for Running welding in repair complete all as specified and directed.

S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S & F in repair 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular)polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.

ditto as per item No 19 above but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for applying two coats of white wash on new wall/concrete surfaces including preparation of newly plastered surfaces all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.

Taking down Old/ Unserviceabl MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC conealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 170 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 170 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 170 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No.170 here - in - before but one light point controlled by two 2 - way switches,with wire 1.5 Sqmm size

All as per Ser item No 170 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

S&F Switch Piano type 2 way switch 5 amp 230 v complete all as specified and directed at Site. Make : Polycab/Havells/Anchor

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.Make :- Havells /HPL/Anchor

S&F Switch piano type , single pole , one way15 Amps complete all as specified and directed. Make :- Polycab/Havells/Anchor

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed .Make :- Polycab/Havells/Anchor

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.Make :- Polycab/Havells/Anchor

S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed at site.Make :- Polycab/Havells/Anchor

S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.Make :- Polycab/Havells/Anchor

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.Make : Polycab/Havells/Anchor

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed at site.Make:- Polycab/Havells/Anchor

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site.Make : Polycab/Havells/Anchor

S&F in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed at site. Make-Polycab/Havells/Anchor

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces.(iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No-187 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire.

All as per ser item No-187 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire

All as per ser item No-187 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire

Supply and fix MCB DB SPN 4 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site. Make -Legrand /Havells/HPL/Schneider

Supply and fix MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed at site. Make -Legrand /Havells/HPL/Schneider

Supply and fix MCB DB SPN 8 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed at site. Make -Legrand /Havells/HPL/Schneider

Supply and fix MCB DB TPN 4 way with metal door suitable for Provision of incommer MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. Make -Legrand /Havells/HPL/Schneider

Supply and fix in replacement MCCB 3Pole 415 volts 100 Amps 50 Hz Adjustable type, with breaking capacity 10 KA complete all as specified and directed at site. Make : legrand/Havells/L&T.

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. Make Havells /Schenider /Legrand.

S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles.Make -Havells /Schenider/Legrand .

S&F in replacement of MCB DP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. Make -Havells/ Schenider /Legrand .

S&F in replacement of LED tube light fitting 18/20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site. Make : - Cat/part No. LUMILINEPLUSBS18WLED865SPCSS of Havells or equivalent in Philips/LUKAR/C&S

S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps,polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed at site.Make :Cat/part No. LUMILINEBS9WLED865SPCWH of Havells or equivalent in philips/Wipro/Jaguar

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed at site . Make : Philips Cat part No. CWLL01V109XX or equivalent in Havells/ HPL

S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed at site.Make : Havells Cat No:-ENDURACITYLITEPLATPLUSSL35WLED 757SASYBOPC or equivalent in Philips/C&S

S&F LED Porch light fitting 6 W made up of polycarbonate,complete all as specified and directed at site. Make : C&S Cat Part No.CG80B6WLED

S&F in replacement Decorative wall light fitting CT2 10 W made up of polycarbonate,complete all as specified and directed at site. Make : Havells Cat Part No.LHDL03160099 or equivalent in philips /Wipro

M&L for repair/greshing of ceiling fan of any size sweep single phase.Celing fan of any size opening from any hight or any locations, fan opening from hook,clamp,& refixing the same after cleaning and greshing with requird necessary cutting/welding/granding job or required store such as nuts,bolts,,washer and suitable length mild steel/ down rod duly making holes etc complete as perspecified and directed by Engr -in -Charge.

S&F in replacement Metal body ventilating air fan single phase 250 mm sweep complete with louver shutter. Quoted rate has been inclusive of all labour charges for making of hole in existing building for fixing of exhaust fan, as per suitable size fan base after cutting of brick/stone wall /suitable size as required, complete all as specified and directed. Make : Havells model ventil Air - DB or equivalent as per list of makes.

S&F water heator single phase 215 V of capacity 25 ltr complete with in let & out let hot water pvc pipe. Quoted rate has been inclusive of all material and labour labour charges for fixing in existing building . complete all as specified and directed. Make :Bajaj/Havells/Polycab or equivalent as per list of makes.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Supply & Fixing in repair G.I tubes 40 MM Lite grade Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution as directed at site.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement .

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr in Charge.Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

S&F of ventilating air fan single phase 250 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed. Make : Havells model ventil Air - DB or equivalent as per list of makes.

S&F air termination single pointed aluminium rod 12 mm dia 300 mm long with suitable nut, bolts, screws, washers & complete all as specified by Eng-in-Charge.

S & F in repair Copper strip 20 x 3.15 mm with saddles and fixing screws etc, for roof conductor and down conductor above ground Complete all as specified and directed.

S&F porcelain insulators of size 75 mm height and 25 mm width for fixing of aluminium and GI strip with suitable nut, bolts and washers complete all as specified and directed.

S&F bakelite insulator sheet of size 100 mm x 100 mm x 12 mm thick for fixing of air termination with suitable nut, bolts and washers complete all as specified and directed by Eng-in-Charge

S&F of medium grade GI tubing 40 mm bore for fixing of air termination single pointed aluminium rod with necessary clamps, nuts, bolts and washers including silver painting over the surfaces of all rusted metallic surfaces complete all as specified and directed.

M&L for test point terminal block made of gun metal or phosphores bronze size 75x75x25mm, drilled and screwed including 3 Nos, 8 mm dia 25 mm long hex head screw complete all as specified and directed.

M&L for Earthing in repair complete with copper earth plate electrode 60cmx60cmx3.15mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to copper strip of size 20X3 mm by means of nuts, bolts, check nuts & washers made of copper and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cmx30cmx10cm with one handle for lifting made out of 8mm dia MS bar, watering pipe 20mm bore galvanized iron pipe (medium grade) with MS funnel for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 5 of MES Sch Pt-I Complete all as specified and directed.

10 M & L for PCC (1:3:6) type C1 using 20mm graded stone aggregate complete with necessary use and waste of form work complete all as specified.

M&L for providing funnel withh all relevent items and PCC cover including white wash and writing Earth pit No including testing of earth resistance complete all as specified and directed.

M K Enterprises

M/S ABHAY KUMAR AND BROTHERS

BUILDCON ENTERPRISES

M/S OMANIA ENTERPRISES

Associated Engineers