REPAIR / REPLACEMENT OF OLD SWITCHES / SOCKETS, UNSV WIRING ETC WITH MODULAR AND DISTRIBUTION BOARD, STUDY LAMP AND SUBMAINS AND INTERNAL WIRING CEILING FAN, EXHAUST FAN, WALL -- ACCESSORIES IN MD/OTM ACCN UNDER GE KAMPTEE.

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes. complete all as specified and as directed

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces. complete all as specified and as directed

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces. complete all as specified and as directed

M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling or surface of wall/ceiling as directed including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. complete all as specified and as directed Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 4 above but One ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and as directed

As per item No 4 above but One 3 pin 5 amp socket out point on the same board with other switches. complete all as specified and as directed

As per item No 4 above but One 3 pin 5 amps socket out let point on independent board complete all as specified and as directed

As per item No 4 above but One bell/buzzer point controlled by one bell push. complete all as specified and as directed

As per item No 4 above but for two point controlled by two, two way switches complete all as specified and as directed

All as per item Sl No 4 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point. complete all as specified and as directed

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x1.5 Sqmm with earth wire of 1x1.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. complete all as specified and as directed

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. complete all as specified and as directed

As per item No 10 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and as directed

As per item No 10 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and as directed

Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and as directed Make : Havells, Legrand, Crabtree

S&F Bell ding dong, AC 230 volts, single phase complete all as specified and as directed

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and as directed

Supply and fix Modular switch one way 6A, 1 module complete all as specified and as directed Make : Havells, Legrand, Crabtree

Supply and fix Modular switch one way 16A, 1 module complete all as specified and as directed Make : Havells, Legrand, Crabtree

Supply and fix Modular bell push 6A, 1 module complete all as specified and as directed Make :Havells, Legrand, Crabtree

Supply and fix Modular Socket 6A 2/3 pin combined 2 module complete all as specified and as directed Make : Havells, Legrand, Crabtree

Supply & Fix Modular Socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and as directed Make : Havells, Legrand, Crabtree

Supply and fix Modular Fan step regulator,120 watt 2 module complete all as specified and as directed Make : Havells, Legrand, Crabtree

Supply and fix piano type switch one way 6A, complete all as specified and as directed Make : Penta or equivalent

Supply and fix piano typeswitch one way 16A, 230 V as per sample complete all as specified and as directed Make : Penta or equivalent

Supply and fix piano type bell push 6A, single phase as per sample complete all as specified and as directed Make : Penta or equivalent

Supply and fix flush type Socket 6A 2/3 pin combined single phase as per sample complete all as specified and as directed Make : Penta or equivalent

Supply & Fix flush type Socket 6A/ 16A 5 pin combined single phase as per sample complete all as specified and as directed Make : Penta or equivalent

Supply and fixflush type Fan step regulator,120 watt switch/socket type as per sample complete all as specified and as directed Make : Penta or equivalent

Supply & Fix modular motor starter 20A , 2 module for AC complete all as specified and directed.

Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed. Make : Bajaj/Philips/Jaquar

Refixing of LED light fitting any type as directed complete all as specified and directed

Supply & fix light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and as directed. Make : Bajaj/Philips/Jaquar

Supply & fix fittings with surface mount LED down lighters 12 W including driver with rated voltage 240 V , 50 Hz, ccomplete all as specified and as directed.

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as specified and as directed. Make : HavellsOrient/Philips/Jaquar

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 1000 lumen prewired, complete all as specified and as directed. Make : Havells/Orient/Philips/Jaquar

S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed. Make : /HavellsOrient/Philips/Jaquar

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and as directed. Make :Orient/Philips/Jaquar

M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with the following items complete all as specified and directed for: Modular metal flush box with modular cover plate with frame 1/2 module Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately.

All as per item no 39.00 but Modular metal flush box with modular cover plate with frame 3 module complete all as specified and as directed

All as per item no 39.00 but Modular metal flush box with modular cover plate with frame 4 module complete all as specified and as directed

All as per item no 39 but Modular metal flush box with modular cover plate with frame 6 module complete all as specified and as directed.

All as per item no 39 but Modular metal flush box with modular cover plate with frame 8 module complete all as specified and as directed

All as per item no 39 but Modular metal flush box with modular cover plate with frame 12 module complete all as specified and as directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and as directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and as directed

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and as directed

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door.

Supply and fix sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and as directed

Supply and fix MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed

Supply and fix MCB triple pole and neutral (TPN) 415 volt 40 to 100 amps 10 KA complete all as specified and as directed.

Supply and fix MCB triple pole (TP) 415 volt 25 to 63 amps 10 KA complete all as specified and as directed

Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion complete all as specified and as directed

Supply and fix in replacement including testing and commissioning of 50 A / 415 volts, 3 phase AHF Panel (Active Harmonic Filter and Automatic Load Balancer) as per IEEE 519-2014, Power factor compensation 100% (Lead / Lag), Load Balancing : Negative Sequence Compensation (Zero Sequence compensation in 4 P / 4 W range), Reaction time: <0.3 ms, Interface (Communication) GSM, MODBUS RTU, USB, Ethernet, Profibus Compatible, IP-65, air cooling, overheating protection including necesary excavation and foundation work, complete all as specified and directed. Make : Havells HSN Code No 8543 or equivalent in L&T/Schneider

Disconnect and insulate electric supply wire and taking down carefully ceiling/exhaust/cabin/ wall fans of any make and sweep dismantling blades, check for repairs required Note : Repairs/ Replacement of spares shall be carried out under appropriate items.

Hanging only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed from ceiling rose to fan connector and testing Making of MES No as directed and specified Note : The fan shall be fitted with new set of clamps rubber shackle split pins and top and bottom nut bolts etc complete all as specified and as directed

Hanging only exhaust/cabin/wall fans of make and sweep connecting lug complete with and including provision of copper conductor cord three core PVC insulated and sheathed from ceiling rose to fan connector & testing. Making of MES No as directed and specified. Note : The fan shall be fitted with new set of washers nuts rubber packing etc complete all as specified and as directed

Opening up of fan motor of ceiling/Exhaust/ wall/cabin fans cleaning starter rotor, cleaning of all parts greasing oiling of bush and bearing reassembling and testing for smooth functioning complete all as specified and as directed . Note : Spares required for replacement shall be measured and paid separately as Supply and Fix under respective items of this schedule complete all as specified and as directed

M&L for taken down burnt/damaged winding, cleaning stator and rotor including slots etc, rewinding with suitable gauge of super enameled copper insulated wire for ceiling fan 1200 mm sweep complete all as specified and as directed

All as per item No 60 above but ceiling fan 1400 mm sweep complete all as specified and as directed

All as per item No 60 above but exhaust fan200 mm sweep complete all as specified and as directed

All as per item No 60 above but exhaust fan 230/250 mm sweep complete all as specified and as directed

All as per item No 60 above but exhaust fan 300 mm sweep complete all as specified and as directed

All as per item No 60 above but exhaust fan 450 mm sweep complete all as specified and as directed

All as per item No 60 above but wall fan / cabin fan 400 mm sweep complete all as specified and as directed

Supply and Fix bearing of replacement for Ceiling fan 1200mm sweep complete all as specified and as directed

All as per item No 67 above but Ceiling fan 1400mm sweep complete all as specified and as directed

All as per item No 67 but 300mm sweep complete all as specified and as directed

All as per item No 67 but 450mm sweep complete all as specified and as directed

S & F gun metal bush for ceiling fan/exhaust fan any sweep complete all as specified and as directed

S & F for replacement of condenser AC 230 Volt. 1.0/1.5 MFD complete all as specified and as directed. Make : Epcos, Havells

S & F for replacement of condenser AC 230 Volt 2.5/4.0 MFD complete all as specified and as directed. Make : Epcos, Havells

S & F blades for exhaust fan/ceiling fan as per sample complete all as specified and as directed

M&L for shaft work of ceiling fan of any make and sweep complete including filling metal and lathe machining complete all as specified and directed.

M/L for down rod for ceiling fan of any make land sweep made out of medium grade GI tubing 15mm dia duly painted with two coat of enamel paint and provision of holes for electric wire at top and bottom also arrangement for fitment of ceiling fans complete all as specified and as directed

M/L MS work such as fan hook angle / FI clamp, MS pipe nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape and size etc including two coats of synthetic enamel paint cover a coat of red oxide primer complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed Note : MES no given by E/M office will be written on fan before fixing.

Supply and fixing of circuit board (PCB) of BLDC fan of size 1200/1400 mm sweep as per sample including all necessary component required for smooth functioning of the fan including removing old unserviceable PCB & necessary connections complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed Note : MES no given by E/M office will be written on fan before fixing

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed Note : MES no given by E/M office will be written on fan before fixing

S & F wall mounted fan complete with guard ring 3 blades 400 mm sweep including mounting bracket complete all as specified and directed. Note : MES no given by E/M office will be written on fan before fixing

S & F induction motor for 200/230 mm sweep exhaust fan as per sample complete all as specified and making exhaust fan functional.

M & L for cleaning of exhaust fan PVC/metal body 200 to 400 mm sweep applying chemical without damaging the original paint of exhaust fan removing all greasy substance complete all as specified and directed

Taking down carefully geyser/water heater of any Make type & size including disconnecting water connection plug water flow, for repairs and refixing the same to original position after repairs including decaling the inner tank and tubing and marking of MES No with synthetic enamel paint, black colour complete all as specified and as directed. Note:- (i) Spares required for replacement shall be measured and paid separately as Supply and Fix under respective items of this schedule. (ii) Quoted rates shall be deemed to be included for any GI Fitting, screwing, required during connecting/ disconnecting water supply.

Supply and Fix thermostat any type, suitable for geyser, ISI marked complete all as specified and as directed.

Supply and Fix PVC threaded tough rubber flexible pipe/ tubing of standard length 450 mm for geysers inlet/outlet connections complete all as specified and as directed.

Supply and Fix three pin plug top 15 amps complete all as specified and as directed. Make : Anchor /Standard/ Havells

Supply and Fix PVC insulated copper conductor PVC sheathed three core 1.50 sq mm flexible cable complete all as specified and as directed. Make : Polycab/ Finolex/ anchor

Supply and Fix PVC insulated copper conductor PVC sheathed three core 2.50 sq mm flexible cable complete all as specified and as directed. Make : Polycab/ Finolex/ anchor

Supply and Fix water heater element any type ( Cup/ Triangular /square) of capacity 2.0 KW ISI marked complete all as specified and as directed. (MAP Accn Type)

Supply and Fix non-return valve made of brass 15mm dia ISI marked complete all as specified and as directed.

Taking down carefully Solar heater water tank of any Make, type & size , disconnecting water connection inlet and out let of tank and plug water flow, for repairs,descaling inner tank , replacement of heating elements thermostat, anti anode, refilling of distilled water as required including painting of water tank and refixing the same to original position after repairs. Marking of MES No all as specified and as directed.(Note:- Cost of heating element with thermostat, inlet outlet adaptor, air release valve, toughened glass will be paid in relevant items as S & F)

Taking down carefully Solar tube collector panel before T/D disconnecting water connection inlet and out let of collector plate plug water flow, descaling,with dilute acid , including replacement of unserviceable collector inlet and outlet flange with rubber gasket, refilling of distilled water as required and refixing the same to original position after repairs. all as specified and as directed

Supply and Fix Electric heater, Elements any type any size with thermostat 2 KW as per sample, complete all as specified and as directed

Supply and Fix Inlet adaptor complete all as specified and as directed

Supply and Fix outlet adaptor complete all as specified and as directed

Supply and Fix AIR release Valve complete all as specified and as directed

Supply and fix Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated for 15 mm pipe line complete all as specified and directed

Supply and fix Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type chromium plated for 15 mm pipeline complete all as specified and as directed

Supply and Fix solar Evacuated glass tube for 100 LPD solar water collector panel complete all as specified and directed

Supply and fix Delite hard water collector panel(tube type), suitable for 100 LPD complete all as specified and as directed

Supply and fix Delite hard water tank, including heating element suitable for 100 LPD complete all as specified and as directed

M & L for any plumbing work required in reparing of solar Water Heater and Electric Heater such as fitting of nipple,union, elbow, tee etc and fixing of existing pipe, repairing of leakages inlet/outlet connection from geyser for proper functioning of Water Heater complete all as specified and as directed Note: pipe shall be measured and paid seperately if required

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 1,63,906.00]

M/S. ELECTROPOWER TECHNOLOGIES (BID ID -3359325)

Paragon Electrotechnics (BID ID -3375464)