REPAIR AND RENEWAL OF JOINERIES INCLUDING PERIODICAL SERVICES AND CERTAIN B/R REPAIRS AT MARCOS, NTS, NAD DOLLYGUNJ, PROTHRAPUR FILTRATION PLANT, DAD QTRS, CHOULDARI DAM AND PEREIRA ENCLAVE UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR

Amount

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper, complete all as specified and as directed by Engineer-in-Charge.

All as per item No 01.00 above but two coats of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.

All as per item No 01.00 above but on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L for applying a layer of wall care putty of thickness 1.5mm on wall and making surface even and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of old existing treatment/finishes on (G+3) bldgs providing necessary scaffolding & safety precautions and cleaning the surfaces free from any loose paint, dust,greases,growth of fungus,algae or moss using wire brush and levelling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :- (a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer.(c) Applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.(d) Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.

Note : (i) Work shall be executed only through authorised applicator duly approved by Manufacturer of Paint and certificate in this connection shall be submitted by the Contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9v Display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall upload MOU letter with any one of Paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer The authorisation letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted alongwith RAR/FB duly signed by Engr-in-Charge and contractor.

(vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.The specification and details of the equipments and tools pertaining to this item is denoted on Particular Specification.Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipments pertaining to smart periodicals not used. (viii) Proper masking arrangement shall be carried before the application of primer or paint. (ix) The other coat of Primer and Paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (x) Cost of scaffolding upto (G+3) height of building shall be included in the quoted rate.

M&L for preparation of old surfaces and applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion complete all as specified and as directed. Note : Rate inclusive of scaffolding at any height

M&L for preparation of old surfaces of wall and applying one coat of cement based paint complete all as specified and as directed by Engineer-in-Charge.

M & L for cleaning the existing floor / Concrete surfaces/Path by washing rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algae / organic particles and applying one coat of weather resistant floor paint complete all as specified and as directed by Engineer-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on brick/block wall or concrete surfaces finished even & fair including taking down cement plaster complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth including taking down cement plaster complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint over a coat of chalk whitning on newly plastered surface of wall including preparation complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of acrylic emulsion weather coat premium quality antifungal exterior emulsion over a coat of primer on newly plastered surface of wall including preparation complete all as specified and as directed by Engineer-in-Charge.

M& L for preparation of new wood/wood based surfaces exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engineer-in-Charge.

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed by Engineer-in-Charge.

M&L for vitrified coloured ceramic tiles 10 mm thick (Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed by Engineer-in-Charge.

All as per item No 21 above but on dado / skirting over 10mm thick backing coat in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 8mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed by Engineer-in-Charge.

All as per item No 23 above but as in vertical surfaces/skirting over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles (light shade) of size 300x200x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed by Engineer-in-Charge.

S&F for glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed by Engineer-in-Charge.

M & L for coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20 mm thick screed bed or bedding layer in cm 1:6 etc complete all as specified and as directed by Engineer-in-Charge.

M & L for 300 x 300 x 10mm thick coloured heavy duty vitrified exterior chequered tiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and as directed.

M&L for 20 mm thick granite (of any type ) work (table rubbed mirror polished) edges rounded chamfered and bull nosed in steps, joints, cills, cooking platform & likes over screed bed incl pointing in white cement with admixture of pigment to match with shade of granite stone incl grinding and polishing over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge.

M&L for Plain Cement Concrete 1:3:6 type C2 Nominal mix (using 40 mm graded stone aggregate) in flooring/ hard standing/Path/plinth protection including expansion joints & formwork and similar works finished even and fair complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed by Engineer-in-Charge.

Taking down Shutters of any description n. exc 1 Sq.m each complete all as specified and as directed by Engineer-in-Charge.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer-in-Charge.

Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed by Engineer-in-Charge.

Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed by Engineer-in-Charge.

S&F Plain, solid, straight chowkats and frames of second class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

S & F 30 mm thick, factory made second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed by Engineer-in-Charge.

S&F 30mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge.

S & F second class hard wood factory made 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed by Engr-in-Charge

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed by Engineer-in-Charge.

S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed by Engineer-in-Charge.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed by Engineer-in-Charge.

S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised complete all as specified and as directed by Engineer-in-Charge.

S&F repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified and as directed by Engineer-in-Charge. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately.

Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed by Engineer-in-Charge.

Supply only anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 5.5mm thick sheet glass ordinary quality in aluminum joinery in squares of area exc 0.50 sqm in each pane including necessary adjustements, dismantling and re-securing complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Aluminium anodised 'XPM' of size 3.00 x 1.5mm x 22 Gauge for mosquito proofing fixed to aluminum shutters including necessary adjustements, dismantling and re-securing complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Aluminium anodised window and ventilator for replacement of unserviceable members in window, ventilators etc complete all as specified and as directed by Engineer-in-Charge.

S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for 18 mm thick HDF high quality boardings one side pre laminated (white) and other side plain to receive decorative laminates as in kitchen cabinet /shelves /wardrobe /wall panelling fixing with necessary small fitting as required as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge.

S&F in repair heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 10 kg complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 12mm thick 7 No of ply Marine proof plywood, grade BWP, type BB fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and as directed by Engineer-in-Charge.

M&L in repair decorative laminate 0.9mm thickness type 1,of surface finish,colour and pattern as approved, fixed with approved adhesive as per manufacture's instructions complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 100mm Extruded brass handles, fabricated type polished complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed by Engineer-in-Charge.

S & F in repair Ball catches/Magnet catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed by Engineer-in-Charge.

M&L for minor repair to aluminum joinery and making serviceable the same by means of adjustment, greacing as necessary etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed by Engineer-in-Charge. Note : Cement concrete shall be measured and paid seperately.

M&L for grinding & polishing of existing Kota stone flooring by mechanical means by using beewax polish and removing all organic particles, oil/grease & similar items to bring the surface clean and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L for texture painting with complete preparation of surface making even with any means and applying a base coat over a coat of primer and then painting the surface with a final coat of of high quality glossy plastic oil emulsion with texture complete complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, including waste pipe and CP urinal spreader complete all as specified and as directed by Engineer-in-Charge.

Taking down scrubs/vegetation growth from crevices upto any height completely by breaking surroundings if needed and pouring herbicide in the hole and then filling Plain cement concrete 1:2:4 using 12.5mm stone aggregate / CM 1:4 with all safety equipments complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engineer-in-Charge.

M&L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw including bending and welding angels, as necessary, gusset plates, riveting etc, n exc 10 Kg each brackets, conforming to fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge. Note: Brackets over 10 Kg each to be measured under Structural Steel.

S&F Mild steel work as in roof trusses (Framed) Trussed, Purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc(Fe-410-W (Gde- E-250) Quality -A) complete all as specified and as directed by Engineer-in-Charge.

S&F rolled Mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250) Quality-A) complete all as specified and as directed by Engineer-in-Charge.

M&L for painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or girth not other wise described complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed by Engineer-in-Charge.

All as per item No 88.00 above but plain steel sheet as in ridges & gutters complete all as specified and as directed by Engineer-in-Charge.

M/s J. M. Enterprises

M/s Shiva Engineering

EXCEL ENGINEERING WORKS

S BOSE

V CHINNA DURAI

KHOTEL CONSTRUCTION

S S CONSTRUCTION