WELCOME MAINT TO OFFRS ACCN, CERTAIN REPAIR TO OFFRS MESS PERTAIN TO B3 AREA OF AGE B/R-II UNDER GE (W) JRC

Amount

M&L preparation of old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, mouds moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed

All as per ser item No 1 above but on ceiling in lieu of wall complete all as specified and as directed

M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as dirceted

M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old surface of wall by removing greasy spot and and applying one coat of CEMENT BASE PAINTon walls etc complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complee all as specified and as directed

M&L preparation of old painted surfaces of steel and iron work of any description over 10 width or girth and applying one coat of synthetic enamel paint comlete all as specified and as dircected by the Engineer-In-Charge

Taking down cement plaster on wall built in cement or cement lime mortar incl raking out joints, hacking for key, scrubbing out with water etc. complete.

M&L 15mm thick rendering on wall in CM 1:4 (up to triple storey)on brick/concrete surface and finishing the surface mixed with WPC @ 3 % by weight of cement and smooth with out using extra cement.(Water proofing compound shall be mixed as per manufactured instruction and paid separatly as per respective items)Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.

Supply only integral water proofing compound. Make : ACC/Water Seal/Doctor Fix etc.

M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling/chajja etc upto triple storey and finishing the surface even and smooth without using extra cement. Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.

M&L renderig 15mm thick cment mortar 1:6 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using using extra cement

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash.

M & L Preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of oil emulsion distemper white or printed on walls.

M&L for removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.

M&L for sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sannding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed by Engineer-in-Charge.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

M&L for roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc.

M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified

M&L for fixing APP based polymeric membrane minimum weighing 3.6kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application

M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per item No 25.00 above but except tiles.

M&L Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

M & L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, benching rounded or chamfered on edges complete.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete.

M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.

Demolition of cement Concrete(unreinforced) of any description and in any position not otherwise specifically provided for (below or above ground level) or as in sunken complete.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete as in sunken floor.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND or equivalent water proofing coating on the entire surface of sunken portion all as specified.

M&L for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.

M&L for 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor.

M&L PCC (1;2:4) type B-0 using 12.5mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor/parapet walls, filling back of iron frame and holdfasts etc

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

All as per ser item No 37.00 above but 1000 ltr capacity complete all as specified and as directed

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore

S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F in repairs15mm bore cast copper alloy chromium plated fancy type wall mixer tap for cold & hot complete all as specified and directed

S&F 15mm dia bore angle cock two way Cast copper alloy chromium plated, fancy type with long shank & cup all as specified and fixed in repairs.

S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe as specified complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed

S & F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

Supply & fix in repair water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed

S&F in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note : pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed

S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed.

S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.

S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/woodencabninet and repairing the disturbed surfaces to match with existing.

S & F in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed

S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted

S&F as in repair Brass chromium plated shower rose 125mm complete.

S&F 4mm thick superior quality shelves (corner), made of transparent toughened glass, size 30x30cm complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied

S&F stainless steel soap dish complete all as specified

S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.

S & F towel rack 24 inch CP type with all fittings and fixed to walls complete all as spd.

S&F in repairs Chromium plated grating 100/125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.

S&F epoxy powder coated pelmet rods of mild steel with and including pair of brackets complete fixed as in repair.

S& F 1mm thick Stainless steel hollow curtain rod with brackets and side doom fixed with all necessary drilling/fixing wooden/plastic cleats in wall complete all as specified and directed.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed

M & L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed

All as per ser item No 71.00 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed

All as per item No 73.00 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area ofeach tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed

All as per item No 75.00 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick

M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screeding 10mm thick 1:4 complete all as specified and as directed.

S&F in repair PVC floor trap size 75/100mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling plain corrugated asbestos /translucent sheet in roof covering incl redges

S&F Rolled mild steel in joist , channel, angle or tee section fixed independently without connecting plates etc (cut to ordinary length i,e, witin 20mm of the length indicated ) of Fe410W(Gde-E-250)quality Acomplete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified

Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc.

S&F Framed work as in doors orgates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening andfixing complete .

M&L for cement concrete 1:2:4 Type C-2 as in foundationns filling and mass concrete all as specified and directed.

Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.

All as per ser item No 86.00 above but exc 1.5 sqm but ont exc 4 Sqm each

Taking down shutter refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified.

Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified.

S&F steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window)including following fittings welded to frame shutter:- (a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window. (b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) MS Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm 100mm long 01 Nos per leaf.(e) MS pintol hinges of size 75mmx12mm-02 Nos per leaf. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Wire mess and painting shall be measured and paid separatly under respective items.

All as per item No 90.00 above but window with glazed shutter. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Glass panes and painting shall be measured and paid separatly under respective items.

S&F mild steel work as in as in grill gratings, door frames, gates etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm

S&F 35mm thick locally fabricated Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick second class hard wood locally fabricated glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I para 8.24(A)

S&F mild steel framed work such as door/cupbd frame, etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified.

M&L PVC 19/20mm cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

S&F solid PVC door frames of size 50mmx47m made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing

M&L 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

S&F continuous piano hinges mild steel bright finish of flap width 30mm

S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished

M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F 100mm butt hinges, mild steel medium weight cold rolled and fixed

S&F 75mm butt hinges, mild steel medium wt cold rooled and fixed

S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.

S&F 150mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked.

S&F aluminium anodised barrel tower bolt of extruded section of 200mm size

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply& Fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane including hacking out old broken glass complete all as directed

S&F Figured glass pin head type glazed with oil putty in squre n-exc 0.5 Sqm in Each pane 4mm thick .

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.

M&L for preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified

Demolition of brick built in cm including all quoins arches pillars etc.

M & L brick work with sub class 'B' bricks in CM 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks

M & L brick work with sub class 'B' bricks in CM 1:6, except bricks straight or curved on plan exc 6 mtr nean radius, using old size bricks

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: Welded Mesh to paid separately)

Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.

Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as spd.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.

S & F 110 mm PVC (SWR) bends/tee any radius provided with access door.

S & F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.

S & F 75 mm PVC (SWR) bends/tee any radius provided with access door.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors.

Taking down sub main wiring of two single core PVC cable PVC insulated 4 / 6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed by Engineer-in-Charge.

Taking down main switch / DB as directed by Engineer-In-Charge.

M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified. a) One light / fan / call bell point controlled by one, one way switch.

b) Do all as per Ser item No 129.00 above but for 5 amps socket on independent board

c) Do all as per Ser item No 129.00 above but for 5 amps socket on same board

Do all as per ser item No 129.00 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M&L for point wiring with 1.5 sqmm, PVC insulated but sheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings and brass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respective items) (a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push.

(b) One light point controlled by two Nos of two way switch.

(c) One socket outet point 5 amps on the same board.

(d) One socket outet point 5 amps on the independent board.

All as per item No. 133.00 hereinbefore but wiring with using cable 2.50 sqmm size copper wire FRLS and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and fixing modular metal flush box 1/2 module complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and directed.

Supply and fixing modular metal flush box 4 module complete all as specified and directed.

Supply and fixing modular metal flush box 6 module complete all as specified and directed.

Supply and fixing modular metal flush box 8 module complete all as specified and directed.

Supply and fixing modular metal flush box 12 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 2 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame,12 module complete all as specified and directed.

Supply and fixing modular Dummy plate complete all as specified and directed.

Supply and Fixing Modular switch 6 Amp 1 way 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply & Fixing of Modular switch 6 Amp 2 way 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular switch 16 Amp 1 way with indicator 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular socket shuttered 6 Amp 2/3 pin combined 2 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular socket 16Amp multipurpose type 2 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular Fan regulator step type 120 watts 2 Module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular bell switch 6 Amp 1 module size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size, complete all as specified.

S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Supply & fixing decorative wall light fixture made up of polycarbonate/glass incl 9 W bulb white/warm all as specified and directed. Make : Havells Floretine WL 1LS B22 SS Item Code -LHFOAJE1TZ1I060 or equivalent as approved by Engineer-in-charge.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.

Taking down and refixing of geyser (Electric Water heater storage type) of capacity 25 Lts , keep in safe custody as per srl No. 1, after B/R repairs. Note : Cost of minor petty items if required such as nut bolt/Pvc pipe is included in quoted rate.

Taking down ceiling fan 1200/1400 mm size , as per item srl no. 1 after B/R repairs. Note: Cost of minor petty items if required such as nut bolt/clamp is included in quoted rate.

Refixing ceiling fan 1200/1400 mm size , as per item srl no. 1 after B/R repairs. Note: Cost of minor petty items if required such as nut bolt/clamp is included in quoted rate.

Taking down only exhaust fan/ fresh air, keep in safe custody as per item srl No. 1 after B/R repairs. Note: Cost of minor petty items if required is included in quoted rate.

Fixing only exhaust fan/ fresh air, keep in safe custody as per item srl No. 1 after B/R repairs. Note: Cost of minor petty items if required such as nut bolt/clamp is included in quoted rate.

Supply and Fixing metal enclosure (plug & socket type DB) complete including single pole and neutral enclosure with two pin, earth plug and socket complete with one SP MCB of capacity 20 Amp, 10 KA all as specified and directed.

Supply and fix Bed side Reading light with all electrical connection as required all as specified and directed. Make: Havells LED READELUX Bed straight 4W Cir. White/Black Product Code: LHEXCIPBPN1K004 or equivalent as approved by Engineer-in-charge.

S & F surface mounted LED Battern with LED tube rod 2 Feet 10W internal surge protection device of 4 KV with voltage band 140-280V and making electrical connection to ceiling rose all as directed

Supply & fixing of 14 Watt Batten luminaire with Polycarbonate Housing with high quality extruded polycarbonate diffuser. The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 2100 nominal lumens and an outstanding System efficacy of at least 150 lumen/watt and maximum system wattage of 14 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <15% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Havells Cat no LUMILINEXS14WLED865SPCWH` equivalent in Signify/Wipro.

Supply & fixing of 20 Watt Batten luminaire with Polycarbonate Housing with high quality opal finish diffuser. The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 2000 nominal lumens and an System efficacy of at least 100 lumen/watt and maximum system wattage of 20 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Havells Cat no LUMILINEPROBS20WLED865SPCWHIND equivalent in Signify/Wipro.

S & F LED bulb 9 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of three star or more and emission of minimum 100 lm/W complete all as specified

S & F LED bulb 12 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of three star or more and emission of minimum 100 lm/W complete all as specified

S & F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed.. Havells Cat no ENDURASUNBEAMSL45WLED757SASYTOPCSENSO equivalent in Signify/Wipro

Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaries with high power 40W suitable for Pole dia 76mm confirming to IP65 Ruby (Clear) Of Havells cat part LHEVBGP7PN6K040. Make Havells or equivalent

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 10 Sqmm 2 Core complete.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 6 Sqmm 2 Core complete.

Supply and fix MCCB 100 Amps 4 pole 415 Volt,25 KA breaking capacity conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply & fixing MCCB 3 pole/4 pole of capacity 63 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangment conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus bars , Neutral links , blanking plates conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

S/F MCB TPN 63 Amps 415 volts as per Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply and fix MCB DB, TPN 4 way double door with suitable 200 amps rated bus bars , Neutral links , blanking plates conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed. all as specified and directed.

Supply & Fixing MCB DP 240 volts 40 Amps to 63 amps in the existing DBs.

Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type conforming to Osafe of HPL / Acti 9 series of Schneider /Ekinox3 of Legrand /equivalent in Havells/Hager/L&T/Siemens complete all as specified and directed.

Supply and fix Sheet metal DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar , neutral bar / connectors suitable copper thimbles , lugs etc complete all as specified and directed. Make : EKINOX3 series of Legrand/Acti 9 metalic series of Schneider /Osafe series of HPL/Metallica of Havells/Hager/L&T/Siemens

S & F 6.5 W LED Bulk Head fitting and connecting electricity using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed

M&L for submain wiring with two RUNS of single core 4 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded FRLS copper conductor PVC insulated unsheathed cables drawn through and including concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked not less than 20 mm dia and all accessories complete all as specified & directed.

M&L for submain wiring with two RUNS of single core 6 sqmm for main wire and one run of single core 6 sqmm as earth wire of stranded copper conductor PVC insulated unsheathed cables drawn through and including concealed conduits in wall and necessary cutting and chassing for rigid PVC conduit ISI marked not less than 20 mm dia and all accessories complete all as specified & directed.

Supply & fix bakelite Hylem sheet 3mm thick of size 10"x12" superior quality, including cutting of sheet to fix switch socket & regulator, including unscrewing the existing switch, socket, regulator and fixing the same on new sheet with new machine screw complete all as specified and directed.

Supply & fix bakelite Hylem sheet 3mm thick of size 9"x5" or as per existing sample of superior quality, including cutting of sheet to fix switch socket & regulator, including unscrewing the existing switch, socket, regulator and fixing the same on new sheet with new machine screw complete all as specified and directed.

AXIS SALES (BID ID -3481149)

M/s GURFATEH BUILDERS (BID ID -3481619)