Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.2 LAccepted-AOC LOHANDIA BAZAR LALMATIA GODDA 814165 JHARKHAND INDIA | GODDA | GODDA | JHARKHAND | 814165 | ₹19.2 L Quoted ₹16.3 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹16.7 LRejected-Finance | ₹16.7 L | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹22.2 LRejected-Finance | ₹22.2 L | L-3 | Rejected-Finance L-3 |
| Sl No | Description | Qty | Unit | M/S SANDHYA CONSTRUCTION L3 | M/s P. K. Construction L1 | M/s M G Construction L2 |
|---|---|---|---|---|---|---|
| 1.00Item Description/ Heading | ||||||
| 2.00 | Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. | 180 | Metre | 600 ₹1.1 L | 505 ₹90,900 | 515 ₹92,700 |
| 3.00 | Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level. | 120 | Metre | 876 ₹1.1 L | 589 ₹70,680 | 600 ₹72,000 |
| 4.00 | Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 150 metre & upto 210 metre depth below ground level. | 120 | Metre | 1,500 ₹1.8 L | 1,416 ₹1.7 L | 1,443 ₹1.7 L |
| 6.00 | Development of tube well in accordance with IS: 2800 (part I) and IS: 11189 to establish maximum rate of usable water yield with out sand content (beyond premissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method measuring static level & draw down etc. by step draw down method, collecting water sampless & getting tested in approved laboratory, I/C disinfection of tubewell all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge. | 12 | Hour | 1,000 ₹12,000 | 906 ₹10,872 | 924 ₹11,088 |
| 7.00 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, includin hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200mm norminal size dia. | 180 | Metre | 2,100 ₹3.8 L | 1,932 ₹3.5 L | 1,969 ₹3.5 L |
| 8.00 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia. | 2 | Each | 400 ₹800 | 250 ₹500 | 255 ₹510 |
| 9.00 | Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part-I), including necessary bolts & nuts of required size complete. 200mm clamp. | 2 | Each | 2,500 ₹5,000 | 1,720 ₹3,440 | 1,753 ₹3,506 |
| 10.00 | Supplying of Nylon rope 25mm dia. | 190 | Metre | 70 ₹13,300 | 60 ₹11,400 | 60 ₹11,400 |
| 11.00 | Supplying G.I pipes 50 mm dia nominal dia including fittings. | 240 | Metre | 605 ₹1.5 L | 465 ₹1.1 L | 511 ₹1.2 L |
Tender Value
₹18.7 L
EMD Value
₹23,400
Closing Date
26 Feb 2026, 6:55 pmClosed
AE(C), RJML AREA
AREA OFFICE RAJMAHAL AREA, DHANKUNDA
Drilling and Commissioning of 02 nos. bore well all complete fitting with pipeline at Dakaita rehab site.
2026_ECL_353318_1
ECL/RJML/AGM/AE(C)/ e-Ten/25-26/519 Dt-16.02.2026
Open Tender
Water Supply/ Sanitation Works
30 days
Dakaita rehab site
Please refer Tender documents.
3 documents required · 3 mandatory
₹23,400
3 May 2026
16 Feb 2026
27 Feb 2026
16 Feb 2026
26 Feb 2026
16 Feb 2026
16 Feb 2026 - 19 Feb 2026
Item Description/ Heading
Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 90 metre & upto 150 metre depth below ground level.
Boring/drilling bore well of 300 mm dia for casing/strainer pipe by suitable method prescribed in IS: 2800 (part-I), including collecting samples from different strate, preparing and submitting strata chart/bore log, inclduing hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, beyond 150 metre & upto 210 metre depth below ground level.
Development of tube well in accordance with IS: 2800 (part I) and IS: 11189 to establish maximum rate of usable water yield with out sand content (beyond premissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method measuring static level & draw down etc. by step draw down method, collecting water sampless & getting tested in approved laboratory, I/C disinfection of tubewell all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge.
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, includin hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200mm norminal size dia.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia.
Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part-I), including necessary bolts & nuts of required size complete. 200mm clamp.
Supplying of Nylon rope 25mm dia.
Supplying G.I pipes 50 mm dia nominal dia including fittings.
Lowering and commissioning of 7.5 HP Submersible pump in deep borewell with GI/ CPVC/PVC pipe including all accessories etc. complete inlcuding cost of labour but excluding cost of material and fittings (cost of pump, cable, PVC Pipe, Contol panel, hanging arrangement like wire/rope to be paid separately)
Supplying of 7.5 HP Submersible pump motor set (three phase 415 volt, 12 stage, speed of pump-2880 rpm) with Glass Noryl Polypropin impeller, stainless steel pump shaft, head-110 metre.Suction casing-cast iron and of approved make as per direction of EIC.
Supplying of three phase/ 415 volt Starter Control Panel of approved make suitable for 7.5 HP submersible pump consisting of volt metre, ammeter, on/off switch, starter, single phase preventer, overload protection, water level guard, dry run protection, under current protection all complete as per direction of EIC.
Supplying of PVC insulated and PVC sheathed flat submersible cable with copper conductor, 3 core 10 sq.mm as per direction of EIC.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: 50 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: 15 mm dia nominal bore
Total impact of GST for the purpose of CTC
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_366105.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.10 MB
Tendernotice_2.pdf
PDF • 1.38 MB
BOQ_366105.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid