Augmentation of water Supply Scheme Rattar Chattar 3 Nos Villages Block Dera Baba Nanak Distt Gurdaspur

Amount

Replace Providing & Installing Testing & Commissioning of one No. Electrically driven Submersible Pumping set of reputed 7.50 BHP Head 48mtr, consisting of electrical appliances such as automatic Star Delta Push Button or oil imeersed 370LPM starter,Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase,preventer,Indicating lamps,Kit-Kat etc. including M.S column Pipe of IS 1239-2004 medium class suitable size 50 mm & length 50 mtr (in 2.50 mm lengths each with flanges,screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable of 80 mtr length and 2.50 mm2 size as per IS 694-1990 reaffirmed 2000 complete in all respects (Old Machinery will be used as sparate set) Rate of Motor with Pump

Panel Board

Submersible cable Size 2.50mm2

Column Pipe (G.I) 80 mm i/d

Congolmerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing material.

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing material.

Hollock shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner straps, wooden knobs or handles fixed in position (Size 45 x 60mm).

Applying Pink Primer or-aluminium priming coat including preparation of surface noting & stoping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Earth filling under floors with surplus soil containing more than 40% gravel or kankar excavated from foundation and taken only from outside the building plinth in 15cm layers including ramming watering and consolidating lead upto 30 meters.

White washing 3 coats inside of pump chamber,

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Providing and fixing of Glass strips 50mm thick in floors

Providing and fixing of Glass strips 40mm thick in floors

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Supplying & fixing glass panes with glazing clips and special metal sash putty of approved make.

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point without fan box

Wiring light point

Wiring 6 Amp. Plug control comprising wall socket point.

Wiring 16/20 amp. power plug control point.

GALVANIZED IRON PIPES AND G.I. EARTHING: Supply & erection of G.I. pipe (A-Class) as per IS:1239 (Part-I) 2004 including sockets, bends, inspection boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- Earthing with 8 S.W.G. (4/mm dia.) G.I. wire in 15mm dia pipe with G.I. reducing socket 50mm x 15mm (upto 14 Metre in length)

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Construction of Plinth Protection for OHSR OF 100000 Ltrs. Capacity outer dia of Toewall 7.60 mtr

Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution/ sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. (Milton roy or Equivalent make)

Providing & fixing 1.2mtr high fencing around the head works site with 1.65 meter post, placed every 2.5 meters apart, embedded in cement concrete blocks and every tenth post to be strutted with three rows of G.I. Barbed wire weighing 9.34 Kg per 100 meters (minimum) and fixing with GI staples tied to 6mm bar nib, with binding wire or by providing cut, including drilling holes in the post, including cost of posts, winding wire, strutted earth work in the post & aluminum painting complete in all respects as per DWSS standard Drawing and analysis

Providing & fixing D-Hook complete with MS Bolts size 300mm x 18mm as per DWSS standard Drawing and analysis.

Providing and Fixing precast pre-stressed cement concrete fencing pole M-40 by 4 Nos. parallel high tensile entwined wire (ISI marked wire 4 mm dia fencing pole size at bottom 4" x 4", size top 3" x 4",Lenght 6ft, hooks 6 No. including cost of excavation, sand filling and erection complete in all respects.

Construction of Foot Path with masonry toe wall & earth filling and Cement Concrete 1:8:16 with 40 mm gauge stone aggregate, 40 mm thick cement concrete topping 1:2:4, inside water works as per DWSS standard Drawing and analysis.

Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per DWSS standard Drawing & Analysis.

Repair of MS Sign Board

Repair of Gate Pillars

Providing & fixing Automated Water Controller

Repair of expension joint 4"

Repair of expension joint 6"

Water Connection Providing proposed water connection to house hold up to wall with providing laying , jointing, testing MDPE pipe line 15mm o/d 2 mtr & GI 15mm i/d 2.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc, cutting threading and testing in trenches in the ground and ISI marked 15mm i/d GN ferrule as oer IS:2692 and 3'' i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete with excavation

Dismantling and restoration of Cement Concrete Road complete in all respect as per DWSS standard approved analysis. (86 No CC Connections) 90mm

Providing, laying, Fixing, jointing, cutting & testing of uPVC Pipes & Specials (6 kg./cm2) including cost of excavation complete in all respects as per ISI-4985 standard analysis. (Supreme Finolex/Prince/Jain/Kissan Make or equivalent make) (Manualy) 90mm i/d PVC pipe

63mm i/d PVC pipe

Providing and laying, jointing, fixing testing ISI marked GI Pipe (as per IS 1239) B-Class, premium make such as (Jindal Hisar) including cost of Specials such as tee, bends, sockets, elbow etc., cutting threading and testing in trenches in the ground complete . GI Pipe 50mm i/d

Dismantling and restoration brick paving complete in all respect as per DWSS standard approved analysis (63mm o/d) PVC Pipe 63mm o/d /90mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS1410) and Bronze(gunmetal) working parts sluice valves ISI marked 14846-2000 including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). 80mm i/d

Consturction of masonary Sluice valve chamber excluding Sluice valve cover as per standard design & drawings of pubic health department. (a) Size 0.6 m. x 0.6 m.

Making of connection with existing pipe line to new pipe line including cost of bailing of water and material complete in all respect (90/110/160mm)

Carriage of Material