REPAIRS / REPLACEMENT OF UNSERVIECEABLE DOOR, WINDOWS, FLOORING, WATER PROOFING AND MISC EM ITEMS OF VARIOUS ELECTRIC SUBSTATION UNDER GE(W) COLABA, MUMBAI

Amount

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to fourth floor.

M&L for 15 mm thick ready mix plaster in multy layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding, for height of bldgs upto Four stories all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

M&L for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished surfaces even and smooth without using extra cement all as specified and directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spray @ 3.00 Kg per sqm by paint brush over cleaned surfaces and Material and Labour for 20-50 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished even and fair Including three coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicator of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 all as specified and directed.

M&L for preparation of newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings all as specified and directed. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of weather proof acrylic exterior paint (100% Acrylic) (Apex Ultima protek, Make : Asian Paints) through authorized applicator only including use of scaffoldings all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints as approved by GE complete all as specified and directed. Note : Up to fourth floor.

Dismantling asbestos cement (corrugated, semi corrugated) sheets in roof coverings including ridges all as specified and directed.

Dismantling timber in scantlings 40 Sqcm and over in section, in unframed work in any position all as specified and directed.

S&F rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%) and silicon (1.5%) with toal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof all as specified and directed by Engr-in-charge.

M&L multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet having maximum pitch. The feed material is to be manufactured out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%) and silicon (1.5%) with toal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof,complete all as specified and directed by Engr-in-charge.

M&L for preparation of new untreated steel surface of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F in repairs tubes medium grade galvanized with all fittings and fixtures to walls and ceilings or laid in floor for 15 mm bore all as specified and directed

Demolition and breaking up drain pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar all as specified and directed.

S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore all as specified and directed.

S&F PVC (SWR) "P" trap, 75 mm bore all as specified and directed.

S&F PVC (SWR) "Q" trap, 75 mm bore all as specified and directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF approved finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed.approved sample as kept in GE Office.

M&L in repairs Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab all as specified and directed

Molding(Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed.

S&F in repairs vitreous china white wash basin flat back size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand all as Specified and directed. Make : Cera/ Parryware/ Hindware, sample as approved by GE

S&F in repairs pillar taps cast copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE

S&F in repair Chromium plated brass angle valve for 15mm bore pipe all as Specified and directed. Make : Cera/ Prayag/ Jaguar , sample as approved by GE

S&F in repairs two way angle valve cock chromium plated brass fancy type bore 15mm all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs plastic seat cover black/white of pattern W.C including fixing divice and Chromium plated nuts all as specified and directed. Make : Cera/ Prayag/ Hindware sample as approved by GE

S&F in repairs vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as Specified and directed. Make : Cera/ Parryware/ Hindware sample as approved by GE

S&F in repairs vitreous china wash down water closet of "Orissa" pattern of size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe and making good to floor all as specified and directed.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repairs bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repairs PVC flushing cistern 10 litres capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket all as specified and directed. Make : Cera/ Prayag/ Hindware sample as approved by GE

Taking down door chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.5 Sqm each all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each all as specified & directed.

Taking down shutters of any description area exc 1 sqm but n exc 2 sqm each all as specified & directed.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints all as specified & directed.

S&F mild steel bands strips, hold fast or small articles of FI or angle all as specified & directed.

Cutting holes in brick walls built in cement for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 cutting exceeding half brick but not exceeding one brick all as specified & directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified & directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F aluminium grill of 7.5mm x 5.2mm bars of opening as per design No DG No 103 of M/s Decogrille/ RG-103 of M/s Royal Grill fixed with aluminium channel 'F ' 20mmx15mm fixed in position with screw all as specified and directed.

M&L 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified & directed.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides including 5mm thick teakwood leaping alround all as specified & directed.

S&F 300mm long MS sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple all as specified & directed.

S&F MS butt hinges cold rolled meium weight of size 100mm all as specified & directed.

S&F MS 150 mm pressed handles oval type stove enamelled black all as specified & directed.

S&F MS barrel tower bolts of extruded section 200 mm long all as specified & directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces not exc 10 cm width or girth over a coat of red oxide primer including preparation of surface complete all as specified and directed.

M&L for preparing wooden new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and and backing and removing rubbish outside MD land all as specified and directed.

M&L for 1st and premium quality of non skid, ceramic digital “coloured” tiles of premium or first quality of size 300 x 300 x 6-7mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified & directed.

M&L for 1st and premium quality of non skid, ceramic “coloured” tiles of premium or first quality of size 400 x 400 x 6-7 mm thick, in floor, shelves set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified & directed.

M&L for 1st and premium quality of non skid, ceramic “coloured” tiles of premium or first quality of size 400 x 400 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering or backing layer in CM 1:4 all as specified and directed.

M&L for 1st and premium quality of Glazed ceramic coloured digital tiles 300 mm x 200 mm or 600x300 x 6 mm to 7 mm thick, in skirting, dados, risers to steps, set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in CM 1:4 all as specified and directed.

M&L for Vitrified Ceramic tiles dark or light shade /double charged /ultra charged 600 x 600 x 8-10 mm thick (square/ rectangular) polished, size of each tiles in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified Ceramic tiles dark or light shade /double charge /ultra charged 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles, laid over and including 10mm thick rendering or backing layer in CM 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for glazed ceramic exterior wall tiles 6 to 8 mm thick, set & jointed in cement and pointed in coloured cement to match the shade of tile laid over and including 10mm thick rendering or backing layer in CM 1:4 all as specified & directed. Make – Johnson (Endura) or equivalent in Kajaria/ Euro tiles, sample as approved by GE

M&L for heavy duty outdoor vitrified tiles dark or light shade 8 mm thick (square/ rectangular) polished, area of each tiles not exc 0.16 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 all as specified and directed. Make : Johnson tiles / Kajaria /Euro, approved sample as kept in GE Office.

M&L for injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots including all necessary scafolding arrangments upto 04 storeys all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.

M&L for injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots including all necessary scafolding arrangments from 05 to 08 storeys all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.

Taking down existing wall finishes any type by vigorously wire brushing, brooming, dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign materials making good minor cracks in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint all as specified and directed.

M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

S&Fixed in repair for stainless letters 450 mm height and 32 mm depth made of 1 mm thick stainless steel sheet with seemless welding rubbed, polished and edges made smooth with necessary fixing devices complete all as specified and directed

S&F in repairs stainless letters 225 mm height and 32 mm depth made of 1 mm thick stainless steel sheet with seemless welding rubbed, polished and edges made smooth with necessary fixing devices all as specified and directed

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application all as specified & directed.

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, DR FIXIT liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying DR FIXIT or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications. Supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, DR FIXIT ROOF SEAL ULTRA liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying DR FIXIT ROOF SEAL ULTRA or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including padding of cement concrete Type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) 40mm average thick on RCC roof surfaces and all other similar works all as specified and directed (DR Fixit New coat or any equivalent)

S&F in repairs 1.25 mm thick steel rolling shutters with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type all as specified & directed. Note :- The items includes all and each fitings requred for the rolling shutter all as specified and as directed.

M&L for repairs of rolling shutters including replacement of top cover , ball baring, spring choring rod, hasp and staple and greasing of the shutters all as specifed and as directed.

S&F in repairs factory made precast RCC drain cover of size 1000mm x 500mm x100mm thickness fixed to drain in CM (1:4) all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removed from site of work all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete and like all as specified and direcetd.

M&L PCC 1:2:4 type B1 (using 12.5 mm graded crushed stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site outside MoD land all as specified and directed.

M&L glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) after and including 15 mm thick in cement plaster in CM (1:4) for fixing tiles all as specified & directed. (Make- Mehtab tiles/ M/s Vitco/M/s Sriji )

M&L for laying 60 mm thick factory made cement concrete interlocking paver block M-35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand all complete as per the direction of Engineer-in-charge. Make- Mehtab tiles/ M/s Vitco/M/s Sriji

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

Taking down carefully copper/aluminium submain wiring complete including fixture such as Plug socket box etc. and making good to the disturbed surfaces of walls, floors all as specified and directed by Engineer-in- Charge.

M&L Point wiring with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing caping, medium grade (ISI marked) of adequate size with all fittings and accessories with concealed 1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular switch/socket of different modules and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match with the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint to match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light point / bell/ Exhaust Fan / wall fan, controlled by one modular switch, 1 way 6/10 amps, 1 module all as specified and directed by Engineer-in- Charge Make of Cable : Anchor / Havells / Finolex / Polycab

All as per item No.84 here-in before but for One ceiling fan / wall fan/ exhaust fan controlled by one switch & regulator

All as per item No.84 here-in before but for One 3 pin socket point 5 Amps on independent board

All as per item No.84 here-in before but for One 3 pin socket point 5 Amps on same board

All as per item No.84 here-in before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed by engr-in-charge.

S&F Switch piano, flush type single pole, one way 5 Amp Make: Anchor,Fine,SSK

S&F Switch piano, flush type single pole, one way 15 Amp Make: Anchor,Fine,SSK

S&F socket 2/3 pin 5 Amp Make:Anchor,Fine,SSK

S&F socket 6/16 A 2/3 pin. Make:Anchor,Fine,SSK

S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals all as specified and as directed. Make: SSK,Anchor,Kinjal,Fine

S&F in repairs 20 watt LED with battery back up 4 feet long batten for continuous fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed Make: Wipro/ Havells/ Shakti or equivalent.

S&F 1ph inverter circuit board with enclosure 2KW, 24V DC to 230V AC, 50 HZ without battery with Overload, deep discharge, short-circuit, Battery low cut off mode to complete all as specified and as directed. Note:- Conection propery done from Existing DC supply board 24 V DC to ensure 24 ×7 hour supply for substation lighting.

S&F turbo force iron body wall mounted fans 600 mm sweep, 230V AC, 50 Hz complete with motor & blades and all required accessories all as specified and as directed.

S&F exhaust fan of capacity 300 mm sweep, 900 RPM or nearest RPM , heavy duty working on single phase 240 volts AC supply complete with louvers and including fixing in wall/window with necessry fittings in round shape for fixing of exhaust fan with the help of 4 Nos anchor fasterner bolts and connection between fan connector and ceiling rose with the help of pvc insulated, multistranded copper conductor cable of size 3 core 0.75 sq mm . (SS bldg ventilations) and galvanium plane sheet of L shape (hollow type) for out going of air to avoid rain water enter in to machine room and all as specified and directed. Make :- Havells Tuibojet SP Heavy duty or equivalent.

S&F Sub main wiring with two run of 10 sqmm stranded copper conductor FRLSH wire with one run of 10 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC casing caping of adequate size for housing the wires for one AC point all as specified and as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

S&F Sub main wiring with two run of 4 sqmm stranded copper conductor FRLSH wire with one run of 2.5 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC casing caping of adequate size for housing the wires for one AC point all as specified and as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 2.5 sqmm cable with PVC conduite shall be measured as one length.

S&F in repairs sheet metal enclosures for DC, DB, Double door, when MCBs to be used 24 volts 6 way with 200 Amp rated bus bar capacity fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs MCB SP 240 volt, 6 to 32 Amps all as specified and directed.

S&F in repairs MCB SPN 240 volt, 63 Amps all as specified and directed.

S&F in repairs MCB SPN 240 volt, 40 Amps all as specified and directed.

S&F in repairs MCB SPN 240 volt, 20 Amps all as specified and directed.

S&F sheet metal enclosures for DB, Double door, when MCBs to be used 240 volts 8 way with 200Amp rated bus bar capacity fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F sheet metal enclosures for DB, Double door, when MCBs to be used 240 volts 12 way with 200Amp rated bus bar capacity fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

HINDUSTAN BUILDERS

GANGAJAL

SN CONSTRUCTION

SHRI SAI ENTERPRISES

B P ENTERPRISES

SAHU AND SAHU CO.

Vandan Enterprises

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

SN CONSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

Vandan Enterprises

GANGAJAL

B P ENTERPRISES